/* * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com> * Andreas Heppel <aheppel@sysgo.de> * * (C) Copyright 2002 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /* * PCI routines */ #include <common.h> #include <command.h> #include <asm/processor.h> #include <asm/io.h> #include <pci.h> unsigned char ShortPCIListing = 1; /* * Follows routines for the output of infos about devices on PCI bus. */ void pci_header_show(pci_dev_t dev); void pci_header_show_brief(pci_dev_t dev); /* * Subroutine: pciinfo * * Description: Show information about devices on PCI bus. * Depending on the define CONFIG_SYS_SHORT_PCI_LISTING * the output will be more or less exhaustive. * * Inputs: bus_no the number of the bus to be scanned. * * Return: None * */ void pciinfo(int BusNum, int ShortPCIListing) { int Device; int Function; unsigned char HeaderType; unsigned short VendorID; pci_dev_t dev; printf("Scanning PCI devices on bus %d\n", BusNum); if (ShortPCIListing) { printf("BusDevFun VendorId DeviceId Device Class Sub-Class\n"); printf("_____________________________________________________________\n"); } for (Device = 0; Device < PCI_MAX_PCI_DEVICES; Device++) { HeaderType = 0; VendorID = 0; for (Function = 0; Function < PCI_MAX_PCI_FUNCTIONS; Function++) { /* * If this is not a multi-function device, we skip the rest. */ if (Function && !(HeaderType & 0x80)) break; dev = PCI_BDF(BusNum, Device, Function); pci_read_config_word(dev, PCI_VENDOR_ID, &VendorID); if ((VendorID == 0xFFFF) || (VendorID == 0x0000)) continue; if (!Function) pci_read_config_byte(dev, PCI_HEADER_TYPE, &HeaderType); if (ShortPCIListing) { printf("%02x.%02x.%02x ", BusNum, Device, Function); pci_header_show_brief(dev); } else { printf("\nFound PCI device %02x.%02x.%02x:\n", BusNum, Device, Function); pci_header_show(dev); } } } } /* * Subroutine: pci_header_show_brief * * Description: Reads and prints the header of the * specified PCI device in short form. * * Inputs: dev Bus+Device+Function number * * Return: None * */ void pci_header_show_brief(pci_dev_t dev) { u16 vendor, device; u8 class, subclass; pci_read_config_word(dev, PCI_VENDOR_ID, &vendor); pci_read_config_word(dev, PCI_DEVICE_ID, &device); pci_read_config_byte(dev, PCI_CLASS_CODE, &class); pci_read_config_byte(dev, PCI_CLASS_SUB_CODE, &subclass); printf("0x%.4x 0x%.4x %-23s 0x%.2x\n", vendor, device, pci_class_str(class), subclass); } /* * Subroutine: PCI_Header_Show * * Description: Reads the header of the specified PCI device. * * Inputs: BusDevFunc Bus+Device+Function number * * Return: None * */ void pci_header_show(pci_dev_t dev) { u8 _byte, header_type; u16 _word; u32 _dword; #define PRINT(msg, type, reg) \ pci_read_config_##type(dev, reg, &_##type); \ printf(msg, _##type) #define PRINT2(msg, type, reg, func) \ pci_read_config_##type(dev, reg, &_##type); \ printf(msg, _##type, func(_##type)) pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type); PRINT (" vendor ID = 0x%.4x\n", word, PCI_VENDOR_ID); PRINT (" device ID = 0x%.4x\n", word, PCI_DEVICE_ID); PRINT (" command register = 0x%.4x\n", word, PCI_COMMAND); PRINT (" status register = 0x%.4x\n", word, PCI_STATUS); PRINT (" revision ID = 0x%.2x\n", byte, PCI_REVISION_ID); PRINT2(" class code = 0x%.2x (%s)\n", byte, PCI_CLASS_CODE, pci_class_str); PRINT (" sub class code = 0x%.2x\n", byte, PCI_CLASS_SUB_CODE); PRINT (" programming interface = 0x%.2x\n", byte, PCI_CLASS_PROG); PRINT (" cache line = 0x%.2x\n", byte, PCI_CACHE_LINE_SIZE); PRINT (" latency time = 0x%.2x\n", byte, PCI_LATENCY_TIMER); PRINT (" header type = 0x%.2x\n", byte, PCI_HEADER_TYPE); PRINT (" BIST = 0x%.2x\n", byte, PCI_BIST); PRINT (" base address 0 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_0); switch (header_type & 0x03) { case PCI_HEADER_TYPE_NORMAL: /* "normal" PCI device */ PRINT (" base address 1 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_1); PRINT (" base address 2 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_2); PRINT (" base address 3 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_3); PRINT (" base address 4 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_4); PRINT (" base address 5 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_5); PRINT (" cardBus CIS pointer = 0x%.8x\n", dword, PCI_CARDBUS_CIS); PRINT (" sub system vendor ID = 0x%.4x\n", word, PCI_SUBSYSTEM_VENDOR_ID); PRINT (" sub system ID = 0x%.4x\n", word, PCI_SUBSYSTEM_ID); PRINT (" expansion ROM base address = 0x%.8x\n", dword, PCI_ROM_ADDRESS); PRINT (" interrupt line = 0x%.2x\n", byte, PCI_INTERRUPT_LINE); PRINT (" interrupt pin = 0x%.2x\n", byte, PCI_INTERRUPT_PIN); PRINT (" min Grant = 0x%.2x\n", byte, PCI_MIN_GNT); PRINT (" max Latency = 0x%.2x\n", byte, PCI_MAX_LAT); break; case PCI_HEADER_TYPE_BRIDGE: /* PCI-to-PCI bridge */ PRINT (" base address 1 = 0x%.8x\n", dword, PCI_BASE_ADDRESS_1); PRINT (" primary bus number = 0x%.2x\n", byte, PCI_PRIMARY_BUS); PRINT (" secondary bus number = 0x%.2x\n", byte, PCI_SECONDARY_BUS); PRINT (" subordinate bus number = 0x%.2x\n", byte, PCI_SUBORDINATE_BUS); PRINT (" secondary latency timer = 0x%.2x\n", byte, PCI_SEC_LATENCY_TIMER); PRINT (" IO base = 0x%.2x\n", byte, PCI_IO_BASE); PRINT (" IO limit = 0x%.2x\n", byte, PCI_IO_LIMIT); PRINT (" secondary status = 0x%.4x\n", word, PCI_SEC_STATUS); PRINT (" memory base = 0x%.4x\n", word, PCI_MEMORY_BASE); PRINT (" memory limit = 0x%.4x\n", word, PCI_MEMORY_LIMIT); PRINT (" prefetch memory base = 0x%.4x\n", word, PCI_PREF_MEMORY_BASE); PRINT (" prefetch memory limit = 0x%.4x\n", word, PCI_PREF_MEMORY_LIMIT); PRINT (" prefetch memory base upper = 0x%.8x\n", dword, PCI_PREF_BASE_UPPER32); PRINT (" prefetch memory limit upper = 0x%.8x\n", dword, PCI_PREF_LIMIT_UPPER32); PRINT (" IO base upper 16 bits = 0x%.4x\n", word, PCI_IO_BASE_UPPER16); PRINT (" IO limit upper 16 bits = 0x%.4x\n", word, PCI_IO_LIMIT_UPPER16); PRINT (" expansion ROM base address = 0x%.8x\n", dword, PCI_ROM_ADDRESS1); PRINT (" interrupt line = 0x%.2x\n", byte, PCI_INTERRUPT_LINE); PRINT (" interrupt pin = 0x%.2x\n", byte, PCI_INTERRUPT_PIN); PRINT (" bridge control = 0x%.4x\n", word, PCI_BRIDGE_CONTROL); break; case PCI_HEADER_TYPE_CARDBUS: /* PCI-to-CardBus bridge */ PRINT (" capabilities = 0x%.2x\n", byte, PCI_CB_CAPABILITY_LIST); PRINT (" secondary status = 0x%.4x\n", word, PCI_CB_SEC_STATUS); PRINT (" primary bus number = 0x%.2x\n", byte, PCI_CB_PRIMARY_BUS); PRINT (" CardBus number = 0x%.2x\n", byte, PCI_CB_CARD_BUS); PRINT (" subordinate bus number = 0x%.2x\n", byte, PCI_CB_SUBORDINATE_BUS); PRINT (" CardBus latency timer = 0x%.2x\n", byte, PCI_CB_LATENCY_TIMER); PRINT (" CardBus memory base 0 = 0x%.8x\n", dword, PCI_CB_MEMORY_BASE_0); PRINT (" CardBus memory limit 0 = 0x%.8x\n", dword, PCI_CB_MEMORY_LIMIT_0); PRINT (" CardBus memory base 1 = 0x%.8x\n", dword, PCI_CB_MEMORY_BASE_1); PRINT (" CardBus memory limit 1 = 0x%.8x\n", dword, PCI_CB_MEMORY_LIMIT_1); PRINT (" CardBus IO base 0 = 0x%.4x\n", word, PCI_CB_IO_BASE_0); PRINT (" CardBus IO base high 0 = 0x%.4x\n", word, PCI_CB_IO_BASE_0_HI); PRINT (" CardBus IO limit 0 = 0x%.4x\n", word, PCI_CB_IO_LIMIT_0); PRINT (" CardBus IO limit high 0 = 0x%.4x\n", word, PCI_CB_IO_LIMIT_0_HI); PRINT (" CardBus IO base 1 = 0x%.4x\n", word, PCI_CB_IO_BASE_1); PRINT (" CardBus IO base high 1 = 0x%.4x\n", word, PCI_CB_IO_BASE_1_HI); PRINT (" CardBus IO limit 1 = 0x%.4x\n", word, PCI_CB_IO_LIMIT_1); PRINT (" CardBus IO limit high 1 = 0x%.4x\n", word, PCI_CB_IO_LIMIT_1_HI); PRINT (" interrupt line = 0x%.2x\n", byte, PCI_INTERRUPT_LINE); PRINT (" interrupt pin = 0x%.2x\n", byte, PCI_INTERRUPT_PIN); PRINT (" bridge control = 0x%.4x\n", word, PCI_CB_BRIDGE_CONTROL); PRINT (" subvendor ID = 0x%.4x\n", word, PCI_CB_SUBSYSTEM_VENDOR_ID); PRINT (" subdevice ID = 0x%.4x\n", word, PCI_CB_SUBSYSTEM_ID); PRINT (" PC Card 16bit base address = 0x%.8x\n", dword, PCI_CB_LEGACY_MODE_BASE); break; default: printf("unknown header\n"); break; } #undef PRINT #undef PRINT2 } /* Convert the "bus.device.function" identifier into a number. */ static pci_dev_t get_pci_dev(char* name) { char cnum[12]; int len, i, iold, n; int bdfs[3] = {0,0,0}; len = strlen(name); if (len > 8) return -1; for (i = 0, iold = 0, n = 0; i < len; i++) { if (name[i] == '.') { memcpy(cnum, &name[iold], i - iold); cnum[i - iold] = '\0'; bdfs[n++] = simple_strtoul(cnum, NULL, 16); iold = i + 1; } } strcpy(cnum, &name[iold]); if (n == 0) n = 1; bdfs[n] = simple_strtoul(cnum, NULL, 16); return PCI_BDF(bdfs[0], bdfs[1], bdfs[2]); } static int pci_cfg_display(pci_dev_t bdf, ulong addr, ulong size, ulong length) { #define DISP_LINE_LEN 16 ulong i, nbytes, linebytes; int rc = 0; if (length == 0) length = 0x40 / size; /* Standard PCI configuration space */ /* Print the lines. * once, and all accesses are with the specified bus width. */ nbytes = length * size; do { uint val4; ushort val2; u_char val1; printf("%08lx:", addr); linebytes = (nbytes>DISP_LINE_LEN)?DISP_LINE_LEN:nbytes; for (i=0; i<linebytes; i+= size) { if (size == 4) { pci_read_config_dword(bdf, addr, &val4); printf(" %08x", val4); } else if (size == 2) { pci_read_config_word(bdf, addr, &val2); printf(" %04x", val2); } else { pci_read_config_byte(bdf, addr, &val1); printf(" %02x", val1); } addr += size; } printf("\n"); nbytes -= linebytes; if (ctrlc()) { rc = 1; break; } } while (nbytes > 0); return (rc); } static int pci_cfg_write (pci_dev_t bdf, ulong addr, ulong size, ulong value) { if (size == 4) { pci_write_config_dword(bdf, addr, value); } else if (size == 2) { ushort val = value & 0xffff; pci_write_config_word(bdf, addr, val); } else { u_char val = value & 0xff; pci_write_config_byte(bdf, addr, val); } return 0; } static int pci_cfg_modify (pci_dev_t bdf, ulong addr, ulong size, ulong value, int incrflag) { ulong i; int nbytes; extern char console_buffer[]; uint val4; ushort val2; u_char val1; /* Print the address, followed by value. Then accept input for * the next value. A non-converted value exits. */ do { printf("%08lx:", addr); if (size == 4) { pci_read_config_dword(bdf, addr, &val4); printf(" %08x", val4); } else if (size == 2) { pci_read_config_word(bdf, addr, &val2); printf(" %04x", val2); } else { pci_read_config_byte(bdf, addr, &val1); printf(" %02x", val1); } nbytes = readline (" ? "); if (nbytes == 0 || (nbytes == 1 && console_buffer[0] == '-')) { /* <CR> pressed as only input, don't modify current * location and move to next. "-" pressed will go back. */ if (incrflag) addr += nbytes ? -size : size; nbytes = 1; #ifdef CONFIG_BOOT_RETRY_TIME reset_cmd_timeout(); /* good enough to not time out */ #endif } #ifdef CONFIG_BOOT_RETRY_TIME else if (nbytes == -2) { break; /* timed out, exit the command */ } #endif else { char *endp; i = simple_strtoul(console_buffer, &endp, 16); nbytes = endp - console_buffer; if (nbytes) { #ifdef CONFIG_BOOT_RETRY_TIME /* good enough to not time out */ reset_cmd_timeout(); #endif pci_cfg_write (bdf, addr, size, i); if (incrflag) addr += size; } } } while (nbytes); return 0; } /* PCI Configuration Space access commands * * Syntax: * pci display[.b, .w, .l] bus.device.function} [addr] [len] * pci next[.b, .w, .l] bus.device.function [addr] * pci modify[.b, .w, .l] bus.device.function [addr] * pci write[.b, .w, .l] bus.device.function addr value */ int do_pci (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong addr = 0, value = 0, size = 0; pci_dev_t bdf = 0; char cmd = 's'; if (argc > 1) cmd = argv[1][0]; switch (cmd) { case 'd': /* display */ case 'n': /* next */ case 'm': /* modify */ case 'w': /* write */ /* Check for a size specification. */ size = cmd_get_data_size(argv[1], 4); if (argc > 3) addr = simple_strtoul(argv[3], NULL, 16); if (argc > 4) value = simple_strtoul(argv[4], NULL, 16); case 'h': /* header */ if (argc < 3) goto usage; if ((bdf = get_pci_dev(argv[2])) == -1) return 1; break; #ifdef CONFIG_CMD_PCI_ENUM case 'e': break; #endif default: /* scan bus */ value = 1; /* short listing */ bdf = 0; /* bus number */ if (argc > 1) { if (argv[argc-1][0] == 'l') { value = 0; argc--; } if (argc > 1) bdf = simple_strtoul(argv[1], NULL, 16); } pciinfo(bdf, value); return 0; } switch (argv[1][0]) { case 'h': /* header */ pci_header_show(bdf); return 0; case 'd': /* display */ return pci_cfg_display(bdf, addr, size, value); #ifdef CONFIG_CMD_PCI_ENUM case 'e': pci_init(); return 0; #endif case 'n': /* next */ if (argc < 4) goto usage; return pci_cfg_modify(bdf, addr, size, value, 0); case 'm': /* modify */ if (argc < 4) goto usage; return pci_cfg_modify(bdf, addr, size, value, 1); case 'w': /* write */ if (argc < 5) goto usage; return pci_cfg_write(bdf, addr, size, value); } return 1; usage: return cmd_usage(cmdtp); } /***************************************************/ U_BOOT_CMD( pci, 5, 1, do_pci, "list and access PCI Configuration Space", "[bus] [long]\n" " - short or long list of PCI devices on bus 'bus'\n" #ifdef CONFIG_CMD_PCI_ENUM "pci enum\n" " - re-enumerate PCI buses\n" #endif "pci header b.d.f\n" " - show header of PCI device 'bus.device.function'\n" "pci display[.b, .w, .l] b.d.f [address] [# of objects]\n" " - display PCI configuration space (CFG)\n" "pci next[.b, .w, .l] b.d.f address\n" " - modify, read and keep CFG address\n" "pci modify[.b, .w, .l] b.d.f address\n" " - modify, auto increment CFG address\n" "pci write[.b, .w, .l] b.d.f address value\n" " - write to CFG address" );