/* * Copyright (c) 2001 William L. Pitts * All rights reserved. * * Redistribution and use in source and binary forms are freely * permitted provided that the above copyright notice and this * paragraph and the following disclaimer are duplicated in all * such forms. * * This software is provided "AS IS" and without any express or * implied warranties, including, without limitation, the implied * warranties of merchantability and fitness for a particular * purpose. */ #include <common.h> #include <command.h> #include <linux/ctype.h> #include <net.h> #include <elf.h> #if defined(CONFIG_WALNUT) || defined(CFG_VXWORKS_MAC_PTR) DECLARE_GLOBAL_DATA_PTR; #endif #ifndef MAX #define MAX(a,b) ((a) > (b) ? (a) : (b)) #endif int valid_elf_image (unsigned long addr); unsigned long load_elf_image (unsigned long addr); /* Allow ports to override the default behavior */ __attribute__((weak)) unsigned long do_bootelf_exec (ulong (*entry)(int, char *[]), int argc, char *argv[]) { unsigned long ret; /* * QNX images require the data cache is disabled. * Data cache is already flushed, so just turn it off. */ int dcache = dcache_status (); if (dcache) dcache_disable (); /* * pass address parameter as argv[0] (aka command name), * and all remaining args */ ret = entry (argc, argv); if (dcache) dcache_enable (); return ret; } /* ====================================================================== * Interpreter command to boot an arbitrary ELF image from memory. * ====================================================================== */ int do_bootelf (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { unsigned long addr; /* Address of the ELF image */ unsigned long rc; /* Return value from user code */ /* -------------------------------------------------- */ int rcode = 0; if (argc < 2) addr = load_addr; else addr = simple_strtoul (argv[1], NULL, 16); if (!valid_elf_image (addr)) return 1; addr = load_elf_image (addr); printf ("## Starting application at 0x%08lx ...\n", addr); /* * pass address parameter as argv[0] (aka command name), * and all remaining args */ rc = do_bootelf_exec ((void *)addr, argc - 1, argv + 1); if (rc != 0) rcode = 1; printf ("## Application terminated, rc = 0x%lx\n", rc); return rcode; } /* ====================================================================== * Interpreter command to boot VxWorks from a memory image. The image can * be either an ELF image or a raw binary. Will attempt to setup the * bootline and other parameters correctly. * ====================================================================== */ int do_bootvx (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { unsigned long addr; /* Address of image */ unsigned long bootaddr; /* Address to put the bootline */ char *bootline; /* Text of the bootline */ char *tmp; /* Temporary char pointer */ #if defined(CONFIG_4xx) || defined(CONFIG_IOP480) char build_buf[80]; /* Buffer for building the bootline */ #endif /* -------------------------------------------------- */ /* * Check the loadaddr variable. * If we don't know where the image is then we're done. */ if (argc < 2) addr = load_addr; else addr = simple_strtoul (argv[1], NULL, 16); #if defined(CONFIG_CMD_NET) /* Check to see if we need to tftp the image ourselves before starting */ if ((argc == 2) && (strcmp (argv[1], "tftp") == 0)) { if (NetLoop (TFTP) <= 0) return 1; printf ("Automatic boot of VxWorks image at address 0x%08lx ... \n", addr); } #endif /* This should equate * to NV_RAM_ADRS + NV_BOOT_OFFSET + NV_ENET_OFFSET * from the VxWorks BSP header files. * This will vary from board to board */ #if defined(CONFIG_WALNUT) tmp = (char *) CFG_NVRAM_BASE_ADDR + 0x500; memcpy ((char *) tmp, (char *) &gd->bd->bi_enetaddr[3], 3); #elif defined(CFG_VXWORKS_MAC_PTR) tmp = (char *) CFG_VXWORKS_MAC_PTR; memcpy ((char *) tmp, (char *) &gd->bd->bi_enetaddr[0], 6); #else puts ("## Ethernet MAC address not copied to NV RAM\n"); #endif /* * Use bootaddr to find the location in memory that VxWorks * will look for the bootline string. The default value for * PowerPC is LOCAL_MEM_LOCAL_ADRS + BOOT_LINE_OFFSET which * defaults to 0x4200 */ if ((tmp = getenv ("bootaddr")) == NULL) bootaddr = 0x4200; else bootaddr = simple_strtoul (tmp, NULL, 16); /* * Check to see if the bootline is defined in the 'bootargs' * parameter. If it is not defined, we may be able to * construct the info */ if ((bootline = getenv ("bootargs")) != NULL) { memcpy ((void *) bootaddr, bootline, MAX(strlen(bootline), 255)); flush_cache (bootaddr, MAX(strlen(bootline), 255)); } else { #if defined(CONFIG_4xx) sprintf (build_buf, "ibmEmac(0,0)"); if ((tmp = getenv ("hostname")) != NULL) { sprintf (&build_buf[strlen (build_buf - 1)], "host:%s ", tmp); } else { sprintf (&build_buf[strlen (build_buf - 1)], ": "); } if ((tmp = getenv ("ipaddr")) != NULL) { sprintf (&build_buf[strlen (build_buf - 1)], "e=%s ", tmp); } memcpy ((void *)bootaddr, build_buf, MAX(strlen(build_buf), 255)); flush_cache (bootaddr, MAX(strlen(build_buf), 255)); #elif defined(CONFIG_IOP480) sprintf (build_buf, "dc(0,0)"); if ((tmp = getenv ("hostname")) != NULL) { sprintf (&build_buf[strlen (build_buf - 1)], "host:%s ", tmp); } else { sprintf (&build_buf[strlen (build_buf - 1)], ": "); } if ((tmp = getenv ("ipaddr")) != NULL) { sprintf (&build_buf[strlen (build_buf - 1)], "e=%s ", tmp); } memcpy ((void *) bootaddr, build_buf, MAX(strlen(build_buf), 255)); flush_cache (bootaddr, MAX(strlen(build_buf), 255)); #else /* * I'm not sure what the device should be for other * PPC flavors, the hostname and ipaddr should be ok * to just copy */ puts ("No bootargs defined\n"); return 1; #endif } /* * If the data at the load address is an elf image, then * treat it like an elf image. Otherwise, assume that it is a * binary image */ if (valid_elf_image (addr)) { addr = load_elf_image (addr); } else { puts ("## Not an ELF image, assuming binary\n"); /* leave addr as load_addr */ } printf ("## Using bootline (@ 0x%lx): %s\n", bootaddr, (char *) bootaddr); printf ("## Starting vxWorks at 0x%08lx ...\n", addr); ((void (*)(void)) addr) (); puts ("## vxWorks terminated\n"); return 1; } /* ====================================================================== * Determine if a valid ELF image exists at the given memory location. * First looks at the ELF header magic field, the makes sure that it is * executable and makes sure that it is for a PowerPC. * ====================================================================== */ int valid_elf_image (unsigned long addr) { Elf32_Ehdr *ehdr; /* Elf header structure pointer */ /* -------------------------------------------------- */ ehdr = (Elf32_Ehdr *) addr; if (!IS_ELF (*ehdr)) { printf ("## No elf image at address 0x%08lx\n", addr); return 0; } if (ehdr->e_type != ET_EXEC) { printf ("## Not a 32-bit elf image at address 0x%08lx\n", addr); return 0; } #if 0 if (ehdr->e_machine != EM_PPC) { printf ("## Not a PowerPC elf image at address 0x%08lx\n", addr); return 0; } #endif return 1; } /* ====================================================================== * A very simple elf loader, assumes the image is valid, returns the * entry point address. * ====================================================================== */ unsigned long load_elf_image (unsigned long addr) { Elf32_Ehdr *ehdr; /* Elf header structure pointer */ Elf32_Shdr *shdr; /* Section header structure pointer */ unsigned char *strtab = 0; /* String table pointer */ unsigned char *image; /* Binary image pointer */ int i; /* Loop counter */ /* -------------------------------------------------- */ ehdr = (Elf32_Ehdr *) addr; /* Find the section header string table for output info */ shdr = (Elf32_Shdr *) (addr + ehdr->e_shoff + (ehdr->e_shstrndx * sizeof (Elf32_Shdr))); if (shdr->sh_type == SHT_STRTAB) strtab = (unsigned char *) (addr + shdr->sh_offset); /* Load each appropriate section */ for (i = 0; i < ehdr->e_shnum; ++i) { shdr = (Elf32_Shdr *) (addr + ehdr->e_shoff + (i * sizeof (Elf32_Shdr))); if (!(shdr->sh_flags & SHF_ALLOC) || shdr->sh_addr == 0 || shdr->sh_size == 0) { continue; } if (strtab) { printf ("%sing %s @ 0x%08lx (%ld bytes)\n", (shdr->sh_type == SHT_NOBITS) ? "Clear" : "Load", &strtab[shdr->sh_name], (unsigned long) shdr->sh_addr, (long) shdr->sh_size); } if (shdr->sh_type == SHT_NOBITS) { memset ((void *)shdr->sh_addr, 0, shdr->sh_size); } else { image = (unsigned char *) addr + shdr->sh_offset; memcpy ((void *) shdr->sh_addr, (const void *) image, shdr->sh_size); } flush_cache (shdr->sh_addr, shdr->sh_size); } return ehdr->e_entry; } /* ====================================================================== */ U_BOOT_CMD( bootelf, 2, 0, do_bootelf, "bootelf - Boot from an ELF image in memory\n", " [address] - load address of ELF image.\n" ); U_BOOT_CMD( bootvx, 2, 0, do_bootvx, "bootvx - Boot vxWorks from an ELF image\n", " [address] - load address of vxWorks ELF image.\n" );