/* * (C) Copyright 2001 * Bill Hunter, Wave 7 Optics, william.hunter@mediaone.net * and * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /* * Description: * Routine to exercise memory for the bringing up of our boards. */ #include <config.h> #include <ppc4xx.h> #define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ #include <ppc_asm.tmpl> #include <ppc_defs.h> #include <asm/cache.h> #include <asm/mmu.h> #include <watchdog.h> #include "errors.h" #define _ASMLANGUAGE .globl test_sdram .globl test_led .globl log_stat .globl log_warn .globl log_err .globl temp_uart_init .globl post_puts .globl disp_hex /***************************************************** ******* Text Strings for low level printing ****** ******* In section got2 ******* *****************************************************/ /* * Define the text strings for errors and warnings. * Switch to .data section. */ .section ".data" err_str: .asciz "*** POST ERROR = " warn_str: .asciz "*** POST WARNING = " end_str: .asciz "\r\n" /* * Enter the labels in Global Entry Table (GOT). * Switch to .got2 section. */ START_GOT GOT_ENTRY(err_str) GOT_ENTRY(warn_str) GOT_ENTRY(end_str) END_GOT /* * Switch back to .text section. */ .text /**************************************** **************************************** ******** LED register test ******** **************************************** ***************************************/ test_led: /* save the return info on stack */ mflr r0 /* Get link register */ stwu r1, -12(r1) /* Save back chain and move SP */ stw r0, +16(r1) /* Save link register */ stw r4, +8(r1) /* save R4 */ WATCHDOG_RESET /* Reset the watchdog */ addi r3, 0, ERR_FF /* first test value is ffff */ addi r4, r3, 0 /* save copy of pattern */ bl set_led /* store first test value */ bl get_led /* read it back */ xor. r4, r4, r3 /* compare to original */ #if defined(CONFIG_W7OLMC) andi. r4, r4, 0x00ff /* lmc has 8 bits */ #else andi. r4, r4, 0xffff /* lmg has 16 bits */ #endif beq LED2 /* next test */ addi r3, 0, ERR_LED /* error code = 1 */ bl log_err /* display error and halt */ LED2: addi r3, 0, ERR_00 /* 2nd test value is 0000 */ addi r4, r3, 0 /* save copy of pattern */ bl set_led /* store first test value */ bl get_led /* read it back */ xor. r4, r4, r3 /* compare to original */ #if defined(CONFIG_W7OLMC) andi. r4, r4, 0x00ff /* lmc has 8 bits */ #else andi. r4, r4, 0xffff /* lmg has 16 bits */ #endif beq LED3 /* next test */ addi r3, 0, ERR_LED /* error code = 1 */ bl log_err /* display error and halt */ LED3: /* restore stack and return */ lwz r0, +16(r1) /* Get saved link register */ mtlr r0 /* Restore link register */ lwz r4, +8(r1) /* restore r4 */ addi r1, r1, +12 /* Remove frame from stack */ blr /* Return to calling function */ /**************************************** **************************************** ******** SDRAM TESTS ******** **************************************** ***************************************/ test_sdram: /* called with mem size in r3 */ /* save the return info on stack */ mflr r0 /* Get link register */ stwu r1, -16(r1) /* Save back chain and move SP */ stw r0, +20(r1) /* Save link register */ stmw r30, +8(r1) /* save R30,R31 */ /* r30 is log2(mem size) */ /* r31 is mem size */ /* take log2 of total mem size */ addi r31, r3, 0 /* save total mem size */ addi r30, 0, 0 /* clear r30 */ l2_loop: srwi. r31, r31, 1 /* shift right 1 */ addi r30, r30, 1 /* count shifts */ bne l2_loop /* loop till done */ addi r30, r30, -1 /* correct for over count */ addi r31, r3, 0 /* save original size */ /* now kick the dog and test the mem */ WATCHDOG_RESET /* Reset the watchdog */ bl Data_Buster /* test crossed/shorted data lines */ addi r3, r30, 0 /* get log2(memsize) */ addi r4, r31, 0 /* get memsize */ bl Ghost_Buster /* test crossed/shorted addr lines */ addi r3, r31, 0 /* get mem size */ bl Bit_Buster /* check for bad internal bits */ /* restore stack and return */ lmw r30, +8(r1) /* Restore r30, r31 */ lwz r0, +20(r1) /* Get saved link register */ mtlr r0 /* Restore link register */ addi r1, r1, +16 /* Remove frame from stack */ blr /* Return to calling function */ /**************************************** ******** sdram data bus test ******** ***************************************/ Data_Buster: /* save the return info on stack */ mflr r0 /* Get link register */ stwu r1, -24(r1) /* Save back chain and move SP */ stw r0, +28(r1) /* Save link register */ stmw r28, 8(r1) /* save r28 - r31 on stack */ /* r31 i/o register */ /* r30 sdram base address */ /* r29 5555 syndrom */ /* r28 aaaa syndrom */ /* set up led register for this test */ addi r3, 0, ERR_RAMG /* set led code to 1 */ bl log_stat /* store test value */ /* now test the dram data bus */ xor r30, r30, r30 /* load r30 with base addr of sdram */ addis r31, 0, 0x5555 /* load r31 with test value */ ori r31, r31, 0x5555 stw r31,0(r30) /* sto the value */ lwz r29,0(r30) /* read it back */ xor r29,r31,r29 /* compare it to original */ addis r31, 0, 0xaaaa /* load r31 with test value */ ori r31, r31, 0xaaaa stw r31,0(r30) /* sto the value */ lwz r28,0(r30) /* read it back */ xor r28,r31,r28 /* compare it to original */ or r3,r28,r29 /* or together both error terms */ /* * Now that we have the error bits, * we have to decide which part they are in. */ bl get_idx /* r5 is now index to error */ addi r3, r3, ERR_RAMG cmpwi r3, ERR_RAMG /* check for errors */ beq db_done /* skip if no errors */ bl log_err /* log the error */ db_done: lmw r28, 8(r1) /* restore r28 - r31 from stack */ lwz r0, +28(r1) /* Get saved link register */ addi r1, r1, +24 /* Remove frame from stack */ mtlr r0 /* Restore link register */ blr /* Return to calling function */ /**************************************************** ******** test for address ghosting in dram ******** ***************************************************/ Ghost_Buster: /* save the return info on stack */ mflr r0 /* Get link register */ stwu r1, -36(r1) /* Save back chain and move SP */ stw r0, +40(r1) /* Save link register */ stmw r25, 8(r1) /* save r25 - r31 on stack */ /* r31 = scratch register */ /* r30 is main referance loop counter, 0 to 23 */ /* r29 is ghost loop count, 0 to 22 */ /* r28 is referance address */ /* r27 is ghost address */ /* r26 is log2 (mem size) = number of byte addr bits */ /* r25 is mem size */ /* save the log2(mem size) and mem size */ addi r26, r3, 0 /* r26 is number of byte addr bits */ addi r25, r4, 0 /* r25 is mem size in bytes */ /* set the leds for address ghost test */ addi r3, 0, ERR_ADDG bl set_led /* first fill memory with zeros */ srwi r31, r25, 2 /* convert bytes to longs */ mtctr r31 /* setup byte counter */ addi r28, 0, 0 /* start at address at 0 */ addi r31, 0, 0 /* data value = 0 */ clr_loop: stw r31, 0(r28) /* Store zero value */ addi r28, r28, 4 /* Increment to next word */ andi. r27, r28, 0xffff /* check for 2^16 loops */ bne clr_skip /* if not there, then skip */ WATCHDOG_RESET /* kick the dog every now and then */ clr_skip: bdnz clr_loop /* Round and round... */ /* now do main test */ addi r30, 0, 0 /* start referance counter at 0 */ outside: /* * Calculate the referance address * the referance address is calculated by setting the (r30-1) * bit of the base address * when r30=0, the referance address is the base address. * thus the sequence 0,1,2,4,8,..,2^(n-1) * setting the bit is done with the following shift functions. */ WATCHDOG_RESET /* Reset the watchdog */ addi r31, 0, 1 /* r31 = 1 */ slw r28, r31, r30 /* set bit coresponding to loop cnt */ srwi r28, r28, 1 /* then shift it right one so */ /* we start at location 0 */ /* fill referance address with Fs */ addi r31, 0, 0x00ff /* r31 = one byte of set bits */ stb r31,0(r28) /* save ff in referance address */ /* ghost (inner) loop, now check all posible ghosted addresses */ addi r29, 0, 0 /* start ghosted loop counter at 0 */ inside: /* * Calculate the ghost address by flipping one * bit of referance address. This gives the * sequence 1,2,4,8,...,2^(n-1) */ addi r31, 0, 1 /* r31 = 1 */ slw r27, r31, r29 /* set bit coresponding to loop cnt */ xor r27, r28, r27 /* ghost address = ref addr with bit flipped*/ /* now check for ghosting */ lbz r31,0(r27) /* get content of ghost addr */ cmpwi r31, 0 /* compare read value to 0 */ bne Casper /* we found a ghost! */ /* now close ghost ( inner ) loop */ addi r29, r29, 1 /* increment inner loop counter */ cmpw r29, r26 /* check for last inner loop */ blt inside /* do more inner loops */ /* now close referance ( outer ) loop */ addi r31, 0, 0 /* r31 = zero */ stb r31, 0(28) /* zero out the altered address loc. */ /* * Increment and check for end, count is zero based. * With the ble, this gives us one more loops than * address bits for sequence 0,1,2,4,8,...2^(n-1) */ addi r30, r30, 1 /* increment outer loop counter */ cmpw r30, r26 /* check for last inner loop */ ble outside /* do more outer loops */ /* were done, lets go home */ b gb_done Casper: /* we found a ghost !! */ addi r3, 0, ERR_ADDF /* get indexed error message */ bl log_err /* log error led error code */ gb_done: /* pack your bags, and go home */ lmw r25, 8(r1) /* restore r25 - r31 from stack */ lwz r0, +40(r1) /* Get saved link register */ addi r1, r1, +36 /* Remove frame from stack */ mtlr r0 /* Restore link register */ blr /* Return to calling function */ /**************************************************** ******** SDRAM data fill tests ********** ***************************************************/ Bit_Buster: /* called with mem size in r3 */ /* save the return info on stack */ mflr r0 /* Get link register */ stwu r1, -16(r1) /* Save back chain and move SP */ stw r0, +20(r1) /* Save link register */ stw r4, +8(r1) /* save R4 */ stw r5, +12(r1) /* save r5 */ addis r5, r3, 0 /* save mem size */ /* Test 55555555 */ addi r3, 0, ERR_R55G /* set up error code in case we fail */ bl log_stat /* store test value */ addis r4, 0, 0x5555 ori r4, r4, 0x5555 bl fill_test /* Test aaaaaaaa */ addi r3, 0, ERR_RAAG /* set up error code in case we fail */ bl log_stat /* store test value */ addis r4, 0, 0xAAAA ori r4, r4, 0xAAAA bl fill_test /* Test 00000000 */ addi r3, 0, ERR_R00G /* set up error code in case we fail */ bl log_stat /* store test value */ addis r4, 0, 0 ori r4, r4, 0 bl fill_test /* restore stack and return */ lwz r5, +12(r1) /* restore r4 */ lwz r4, +8(r1) /* restore r4 */ lwz r0, +20(r1) /* Get saved link register */ addi r1, r1, +16 /* Remove frame from stack */ mtlr r0 /* Restore link register */ blr /* Return to calling function */ /**************************************************** ******** fill test ******** ***************************************************/ /* tests memory by filling with value, and reading back */ /* r5 = Size of memory in bytes */ /* r4 = Value to write */ /* r3 = Error code */ fill_test: mflr r0 /* Get link register */ stwu r1, -32(r1) /* Save back chain and move SP */ stw r0, +36(r1) /* Save link register */ stmw r27, 8(r1) /* save r27 - r31 on stack */ /* r31 - scratch register */ /* r30 - memory address */ mr r27, r3 mr r28, r4 mr r29, r5 WATCHDOG_RESET /* Reset the watchdog */ /* first fill memory with Value */ srawi r31, r29, 2 /* convert bytes to longs */ mtctr r31 /* setup counter */ addi r30, 0, 0 /* Make r30 = addr 0 */ ft_0: stw r28, 0(r30) /* Store value */ addi r30, r30, 4 /* Increment to next word */ andi. r31, r30, 0xffff /* check for 2^16 loops */ bne ft_0a /* if not there, then skip */ WATCHDOG_RESET /* kick the dog every now and then */ ft_0a: bdnz ft_0 /* Round and round... */ WATCHDOG_RESET /* Reset the watchdog */ /* Now confirm Value is in memory */ srawi r31, r29, 2 /* convert bytes to longs */ mtctr r31 /* setup counter */ addi r30, 0, 0 /* Make r30 = addr 0 */ ft_1: lwz r31, 0(r30) /* get value from memory */ xor. r31, r31, r28 /* Writen = Read ? */ bne ft_err /* If bad, than halt */ addi r30, r30, 4 /* Increment to next word */ andi. r31, r30, 0xffff /* check for 2^16 loops*/ bne ft_1a /* if not there, then skip */ WATCHDOG_RESET /* kick the dog every now and then */ ft_1a: bdnz ft_1 /* Round and round... */ WATCHDOG_RESET /* Reset the watchdog */ b fill_done /* restore and return */ ft_err: addi r29, r27, 0 /* save current led code */ addi r27, r31, 0 /* get pattern in r27 */ bl get_idx /* get index from r27 */ add r27, r27, r29 /* add index to old led code */ bl log_err /* output led err code, halt CPU */ fill_done: lmw r27, 8(r1) /* restore r27 - r31 from stack */ lwz r0, +36(r1) /* Get saved link register */ addi r1, r1, +32 /* Remove frame from stack */ mtlr r0 /* Restore link register */ blr /* Return to calling function */ /**************************************************** ******* get error index from r3 pattern ******** ***************************************************/ get_idx: /* r3 = (MSW(r3) !=0)*2 + (LSW(r3) !=0) */ /* save the return info on stack */ mflr r0 /* Get link register */ stwu r1, -12(r1) /* Save back chain and move SP */ stw r0, +16(r1) /* Save link register */ stw r4, +8(r1) /* save R4 */ andi. r4, r3, 0xffff /* check for lower bits */ beq gi2 /* skip if no bits set */ andis. r4, r3, 0xffff /* check for upper bits */ beq gi3 /* skip if no bits set */ addi r3, 0, 3 /* both upper and lower bits set */ b gi_done gi2: andis. r4, r3, 0xffff /* check for upper bits*/ beq gi4 /* skip if no bits set */ addi r3, 0, 2 /* only upper bits set */ b gi_done gi3: addi r3, 0, 1 /* only lower bits set */ b gi_done gi4: addi r3, 0, 0 /* no bits set */ gi_done: /* restore stack and return */ lwz r0, +16(r1) /* Get saved link register */ mtlr r0 /* Restore link register */ lwz r4, +8(r1) /* restore r4 */ addi r1, r1, +12 /* Remove frame from stack */ blr /* Return to calling function */ /**************************************************** ******** set LED to R5 and hang ******** ***************************************************/ log_stat: /* output a led code and continue */ set_led: /* save the return info on stack */ mflr r0 /* Get link register */ stwu r1, -12(r1) /* Save back chain and move SP */ stw r0, +16(r1) /* Save link register */ stw r4, +8(r1) /* save R4 */ addis r4, 0, 0xfe00 /* LED buffer is at 0xfe000000 */ #if defined(CONFIG_W7OLMG) /* only on gateway, invert outputs */ xori r3,r3, 0xffff /* complement led code, active low */ sth r3, 0(r4) /* store first test value */ xori r3,r3, 0xffff /* complement led code, active low */ #else /* if not gateway, then don't invert */ sth r3, 0(r4) /* store first test value */ #endif /* restore stack and return */ lwz r0, +16(r1) /* Get saved link register */ mtlr r0 /* Restore link register */ lwz r4, +8(r1) /* restore r4 */ addi r1, r1, +12 /* Remove frame from stack */ blr /* Return to calling function */ get_led: /* save the return info on stack */ mflr r0 /* Get link register */ stwu r1, -12(r1) /* Save back chain and move SP */ stw r0, +16(r1) /* Save link register */ stw r4, +8(r1) /* save R4 */ addis r4, 0, 0xfe00 /* LED buffer is at 0xfe000000 */ lhz r3, 0(r4) /* store first test value */ #if defined(CONFIG_W7OLMG) /* only on gateway, invert inputs */ xori r3,r3, 0xffff /* complement led code, active low */ #endif /* restore stack and return */ lwz r0, +16(r1) /* Get saved link register */ mtlr r0 /* Restore link register */ lwz r4, +8(r1) /* restore r4 */ addi r1, r1, +12 /* Remove frame from stack */ blr /* Return to calling function */ log_err: /* output the error and hang the board ( for now ) */ /* save the return info on stack */ mflr r0 /* Get link register */ stwu r1, -12(r1) /* Save back chain and move SP */ stw r0, +16(r1) /* Save link register */ stw r3, +8(r1) /* save a copy of error code */ bl set_led /* set the led pattern */ GET_GOT /* get GOT address in r14 */ lwz r3,GOT(err_str) /* get address of string */ bl post_puts /* output the warning string */ lwz r3, +8(r1) /* get error code */ addi r4, 0, 2 /* set disp length to 2 nibbles */ bl disp_hex /* output the error code */ lwz r3,GOT(end_str) /* get address of string */ bl post_puts /* output the warning string */ halt: b halt /* hang */ /* restore stack and return */ lwz r0, +16(r1) /* Get saved link register */ mtlr r0 /* Restore link register */ addi r1, r1, +12 /* Remove frame from stack */ blr /* Return to calling function */ log_warn: /* output a warning, then continue with operations */ /* save the return info on stack */ mflr r0 /* Get link register */ stwu r1, -16(r1) /* Save back chain and move SP */ stw r0, +20(r1) /* Save link register */ stw r3, +8(r1) /* save a copy of error code */ stw r14, +12(r1) /* save a copy of r14 (used by GOT) */ bl set_led /* set the led pattern */ GET_GOT /* get GOT address in r14 */ lwz r3,GOT(warn_str) /* get address of string */ bl post_puts /* output the warning string */ lwz r3, +8(r1) /* get error code */ addi r4, 0, 2 /* set disp length to 2 nibbles */ bl disp_hex /* output the error code */ lwz r3,GOT(end_str) /* get address of string */ bl post_puts /* output the warning string */ addis r3, 0, 64 /* has a long delay */ mtctr r3 log_2: WATCHDOG_RESET /* this keeps dog from barking, */ /* and takes time */ bdnz log_2 /* loop till time expires */ /* restore stack and return */ lwz r0, +20(r1) /* Get saved link register */ lwz r14, +12(r1) /* restore r14 */ mtlr r0 /* Restore link register */ addi r1, r1, +16 /* Remove frame from stack */ blr /* Return to calling function */ /******************************************************************* * temp_uart_init * Temporary UART initialization routine * Sets up UART0 to run at 9600N81 off of the internal clock. * R3-R4 are used. ******************************************************************/ temp_uart_init: /* save the return info on stack */ mflr r0 /* Get link register */ stwu r1, -8(r1) /* Save back chain and move SP */ stw r0, +12(r1) /* Save link register */ addis r3, 0, 0xef60 ori r3, r3, 0x0303 /* r3 = UART0_LCR */ addi r4, 0, 0x83 /* n81 format, divisor regs enabled */ stb r4, 0(r3) /* set baud rate to use internal clock, baud = (200e6/16)/31/42 = 9600 */ addis r3, 0, 0xef60 /* Address of baud divisor reg */ ori r3, r3, 0x0300 /* UART0_DLM */ addi r4, 0, +42 /* uart baud divisor LSB = 93 */ stb r4, 0(r3) /* baud = (200 /16)/14/93 */ addi r3, r3, 0x0001 /* uart baud divisor addr */ addi r4, 0, 0 stb r4, 0(r3) /* Divisor Latch MSB = 0 */ addis r3, 0, 0xef60 ori r3, r3, 0x0303 /* r3 = UART0_LCR */ addi r4, 0, 0x03 /* n81 format, tx/rx regs enabled */ stb r4, 0(r3) /* output a few line feeds */ addi r3, 0, '\n' /* load line feed */ bl post_putc /* output the char */ addi r3, 0, '\n' /* load line feed */ bl post_putc /* output the char */ /* restore stack and return */ lwz r0, +12(r1) /* Get saved link register */ mtlr r0 /* Restore link register */ addi r1, r1, +8 /* Remove frame from stack */ blr /* Return to calling function */ /********************************************************************** ** post_putc ** outputs charactor in R3 ** r3 returns the error code ( -1 if there is an error ) *********************************************************************/ post_putc: /* save the return info on stack */ mflr r0 /* Get link register */ stwu r1, -20(r1) /* Save back chain and move SP */ stw r0, +24(r1) /* Save link register */ stmw r29, 8(r1) /* save r29 - r31 on stack r31 - uart base address r30 - delay counter r29 - scratch reg */ addis r31, 0, 0xef60 /* Point to uart base */ ori r31, r31, 0x0300 addis r30, 0, 152 /* Load about 10,000,000 ticks. */ pputc_lp: lbz r29, 5(r31) /* Read Line Status Register */ andi. r29, r29, 0x20 /* Check THRE status */ bne thre_set /* Branch if FIFO empty */ addic. r30, r30, -1 /* Decrement and check if empty. */ bne pputc_lp /* Try, try again */ addi r3, 0, -1 /* Load error code for timeout */ b pputc_done /* Bail out with error code set */ thre_set: stb r3, 0(r31) /* Store character to UART */ addi r3, 0, 0 /* clear error code */ pputc_done: lmw r29, 8(r1) /*restore r29 - r31 from stack */ lwz r0, +24(r1) /* Get saved link register */ addi r1, r1, +20 /* Remove frame from stack */ mtlr r0 /* Restore link register */ blr /* Return to calling function */ /**************************************************************** post_puts Accepts a null-terminated string pointed to by R3 Outputs to the serial port until 0x00 is found. r3 returns the error code ( -1 if there is an error ) *****************************************************************/ post_puts: /* save the return info on stack */ mflr r0 /* Get link register */ stwu r1, -12(r1) /* Save back chain and move SP */ stw r0, +16(r1) /* Save link register */ stw r31, 8(r1) /* save r31 - char pointer */ addi r31, r3, 0 /* move pointer to R31 */ pputs_nxt: lbz r3, 0(r31) /* Get next character */ addic. r3, r3, 0 /* Check for zero */ beq pputs_term /* bail out if zero */ bl post_putc /* output the char */ addic. r3, r3, 0 /* check for error */ bne pputs_err addi r31, r31, 1 /* point to next char */ b pputs_nxt /* loop till term */ pputs_err: addi r3, 0, -1 /* set error code */ b pputs_end /* were outa here */ pputs_term: addi r3, 0, 1 /* set success code */ /* restore stack and return */ pputs_end: lwz r31, 8(r1) /* restore r27 - r31 from stack */ lwz r0, +16(r1) /* Get saved link register */ addi r1, r1, +12 /* Remove frame from stack */ mtlr r0 /* Restore link register */ blr /* Return to calling function */ /******************************************************************** ***** disp_hex ***** Routine to display a hex value from a register. ***** R3 is value to display ***** R4 is number of nibbles to display ie 2 for byte 8 for (long)word ***** Returns -1 in R3 if there is an error ( ie serial port hangs ) ***** Returns 0 in R3 if no error *******************************************************************/ disp_hex: /* save the return info on stack */ mflr r0 /* Get link register */ stwu r1, -16(r1) /* Save back chain and move SP */ stw r0, +20(r1) /* Save link register */ stmw r30, 8(r1) /* save r30 - r31 on stack */ /* r31 output char */ /* r30 uart base address */ addi r30, 0, 8 /* Go through 8 nibbles. */ addi r31, r3, 0 pputh_nxt: rlwinm r31, r31, 4, 0, 31 /* Rotate next nibble into position */ andi. r3, r31, 0x0f /* Get nibble. */ addi r3, r3, 0x30 /* Add zero's ASCII code. */ cmpwi r3, 0x03a blt pputh_out addi r3, r3, 0x07 /* 0x27 for lower case. */ pputh_out: cmpw r30, r4 bgt pputh_skip bl post_putc addic. r3, r3, 0 /* check for error */ bne pputh_err pputh_skip: addic. r30, r30, -1 bne pputh_nxt xor r3, r3, r3 /* Clear error code */ b pputh_done pputh_err: addi r3, 0, -1 /* set error code */ pputh_done: /* restore stack and return */ lmw r30, 8(r1) /* restore r30 - r31 from stack */ lwz r0, +20(r1) /* Get saved link register */ addi r1, r1, +16 /* Remove frame from stack */ mtlr r0 /* Restore link register */ blr /* Return to calling function */