/* * Copyright (C) 2004 Embedded Edge, LLC * Dan Malek * Copied from ADS85xx. * Updates for Silicon Tx GP3 8560. We only support 32-bit flash * and DDR with SPD EEPROM configuration. * * Copyright 2004 Freescale Semiconductor. * Copyright (C) 2002,2003, Motorola Inc. * Xianghua Xiao * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include #include /* * TLB0 and TLB1 Entries * * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR. * However, CCSRBAR is then relocated to CFG_CCSRBAR right after * these TLB entries are established. * * The TLB entries for DDR are dynamically setup in spd_sdram() * and use TLB1 Entries 8 through 15 as needed according to the * size of DDR memory. * * MAS0: tlbsel, esel, nv * MAS1: valid, iprot, tid, ts, tsize * MAS2: epn, x0, x1, w, i, m, g, e * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr */ #define entry_start \ mflr r1 ; \ bl 0f ; #define entry_end \ 0: mflr r0 ; \ mtlr r1 ; \ blr ; .section .bootpg, "ax" .globl tlb1_entry tlb1_entry: entry_start /* * Number of TLB0 and TLB1 entries in the following table */ .long 13 #if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR) /* * TLB0 4K Non-cacheable, guarded * 0xff700000 4K Initial CCSRBAR mapping * * This ends up at a TLB0 Index==0 entry, and must not collide * with other TLB0 Entries. */ .long FSL_BOOKE_MAS0(0, 0, 0) .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G)) .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) #else #error("Update the number of table entries in tlb1_entry") #endif /* * TLB0 16K Cacheable, non-guarded * 0xd001_0000 16K Temporary Global data for initialization * * Use four 4K TLB0 entries. These entries must be cacheable * as they provide the bootstrap memory before the memory * controler and real memory have been configured. * * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c, * and must not collide with other TLB0 entries. */ .long FSL_BOOKE_MAS0(0, 0, 0) .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0) .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) .long FSL_BOOKE_MAS0(0, 0, 0) .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0) .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) .long FSL_BOOKE_MAS0(0, 0, 0) .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0) .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) .long FSL_BOOKE_MAS0(0, 0, 0) .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0) .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0) .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) /* * TLB 0: 16M Non-cacheable, guarded * 0xff000000 16M FLASH * Out of reset this entry is only 4K. */ .long FSL_BOOKE_MAS0(1, 0, 0) .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M) .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G)) .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) /* * TLB 1: 256M Non-cacheable, guarded * 0x80000000 256M PCI1 MEM First half */ .long FSL_BOOKE_MAS0(1, 1, 0) .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G)) .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) /* * TLB 2: 256M Non-cacheable, guarded * 0x90000000 256M PCI1 MEM Second half */ .long FSL_BOOKE_MAS0(1, 2, 0) .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G)) .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) /* * TLB 3: 256M Non-cacheable, guarded * 0xc0000000 256M Rapid IO MEM First half */ .long FSL_BOOKE_MAS0(1, 3, 0) .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE, (MAS2_I|MAS2_G)) .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) /* * TLB 4: 256M Non-cacheable, guarded * 0xd0000000 256M Rapid IO MEM Second half */ .long FSL_BOOKE_MAS0(1, 4, 0) .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M) .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G)) .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) /* * TLB 5: 64M Non-cacheable, guarded * 0xe000_0000 1M CCSRBAR * 0xe200_0000 16M PCI1 IO */ .long FSL_BOOKE_MAS0(1, 5, 0) .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G)) .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) /* * TLB 6: 64M Cacheable, non-guarded * 0xf000_0000 64M LBC SDRAM */ .long FSL_BOOKE_MAS0(1, 6, 0) .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0) .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) /* * TLB 7: 16K Non-cacheable, guarded * 0xfc000000 16K Configuration Latch register */ .long FSL_BOOKE_MAS0(1, 7, 0) .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64K) .long FSL_BOOKE_MAS2(CFG_LBC_LCLDEVS_BASE, (MAS2_I|MAS2_G)) .long FSL_BOOKE_MAS3(CFG_LBC_LCLDEVS_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) #if !defined(CONFIG_SPD_EEPROM) /* * TLB 8, 9: 128M DDR * 0x00000000 64M DDR System memory * 0x04000000 64M DDR System memory * Without SPD EEPROM configured DDR, this must be setup manually. * Make sure the TLB count at the top of this table is correct. * Likely it needs to be increased by two for these entries. */ #error("Update the number of table entries in tlb1_entry") .long FSL_BOOKE_MAS0(1, 8, 0) .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE, 0) .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) .long FSL_BOOKE_MAS0(1, 9, 0) .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M) .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE + 0x4000000, 0) .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE + 0x4000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR)) #endif entry_end