/* * Board specific setup info * * (C) Copyright 2003 * Texas Instruments, <www.ti.com> * Kshitij Gupta <Kshitij@ti.com> * * Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004 * * Modified for OMAP 5912 OSK board by Rishi Bhattacharya, Apr 2004 * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include <config.h> #include <version.h> #if defined(CONFIG_OMAP1610) #include <./configs/omap1510.h> #endif _TEXT_BASE: .word TEXT_BASE /* sdram load addr from config.mk */ .globl lowlevel_init lowlevel_init: /*------------------------------------------------------* * Ensure i-cache is enabled * * To configure TC regs without fetching instruction * *------------------------------------------------------*/ mrc p15, 0, r0, c1, c0 orr r0, r0, #0x1000 mcr p15, 0, r0, c1, c0 /*------------------------------------------------------* *mask all IRQs by setting all bits in the INTMR default* *------------------------------------------------------*/ mov r1, #0xffffffff ldr r0, =REG_IHL1_MIR str r1, [r0] ldr r0, =REG_IHL2_MIR str r1, [r0] /*------------------------------------------------------* * Set up ARM CLM registers (IDLECT1) * *------------------------------------------------------*/ ldr r0, REG_ARM_IDLECT1 ldr r1, VAL_ARM_IDLECT1 str r1, [r0] /*------------------------------------------------------* * Set up ARM CLM registers (IDLECT2) * *------------------------------------------------------*/ ldr r0, REG_ARM_IDLECT2 ldr r1, VAL_ARM_IDLECT2 str r1, [r0] /*------------------------------------------------------* * Set up ARM CLM registers (IDLECT3) * *------------------------------------------------------*/ ldr r0, REG_ARM_IDLECT3 ldr r1, VAL_ARM_IDLECT3 str r1, [r0] mov r1, #0x01 /* PER_EN bit */ ldr r0, REG_ARM_RSTCT2 strh r1, [r0] /* CLKM; Peripheral reset. */ /* Set CLKM to Sync-Scalable */ mov r1, #0x1000 ldr r0, REG_ARM_SYSST mov r2, #0 1: cmp r2, #1 streqh r1, [r0] add r2, r2, #1 cmp r2, #0x100 /* wait for any bubbles to finish */ bne 1b ldr r1, VAL_ARM_CKCTL ldr r0, REG_ARM_CKCTL strh r1, [r0] /* a few nops to let settle */ nop nop nop nop nop nop nop nop nop nop /* setup DPLL 1 */ /* Ramp up the clock to 96Mhz */ ldr r1, VAL_DPLL1_CTL ldr r0, REG_DPLL1_CTL strh r1, [r0] ands r1, r1, #0x10 /* Check if PLL is enabled. */ beq lock_end /* Do not look for lock if BYPASS selected */ 2: ldrh r1, [r0] ands r1, r1, #0x01 /* Check the LOCK bit.*/ beq 2b /* loop until bit goes hi. */ lock_end: /*------------------------------------------------------* * Turn off the watchdog during init... * *------------------------------------------------------*/ ldr r0, REG_WATCHDOG ldr r1, WATCHDOG_VAL1 str r1, [r0] ldr r1, WATCHDOG_VAL2 str r1, [r0] ldr r0, REG_WSPRDOG ldr r1, WSPRDOG_VAL1 str r1, [r0] ldr r0, REG_WWPSDOG watch1Wait: ldr r1, [r0] tst r1, #0x10 bne watch1Wait ldr r0, REG_WSPRDOG ldr r1, WSPRDOG_VAL2 str r1, [r0] ldr r0, REG_WWPSDOG watch2Wait: ldr r1, [r0] tst r1, #0x10 bne watch2Wait /* Set memory timings corresponding to the new clock speed */ ldr r3, VAL_SDRAM_CONFIG_SDF0 /* Check execution location to determine current execution location * and branch to appropriate initialization code. */ mov r0, #0x10000000 /* Load physical SDRAM base. */ mov r1, pc /* Get current execution location. */ cmp r1, r0 /* Compare. */ bge skip_sdram /* Skip over EMIF-fast initialization if running from SDRAM. */ /* identify the device revision, -- TMX or TMP(TMS) */ ldr r0, REG_DEVICE_ID ldr r1, [r0] ldr r0, VAL_DEVICE_ID_TMP mov r1, r1, lsl #15 mov r1, r1, lsr #16 cmp r0, r1 bne skip_TMP_Patch /* Enable TMP/TMS device new features */ mov r0, #1 ldr r1, REG_TC_EMIFF_DOUBLER str r0, [r1] /* Enable new ac parameters */ mov r0, #0x0b ldr r1, REG_SDRAM_CONFIG2 str r0, [r1] ldr r3, VAL_SDRAM_CONFIG_SDF1 skip_TMP_Patch: /* * Delay for SDRAM initialization. */ mov r0, #0x1800 /* value should be checked */ 3: subs r0, r0, #0x1 /* Decrement count */ bne 3b /* * Set SDRAM control values. Disable refresh before MRS command. */ /* mobile ddr operation */ ldr r0, REG_SDRAM_OPERATION mov r2, #07 str r2, [r0] /* config register */ ldr r0, REG_SDRAM_CONFIG str r3, [r0] /* manual command register */ ldr r0, REG_SDRAM_MANUAL_CMD /* issue set cke high */ mov r1, #CMD_SDRAM_CKE_SET_HIGH str r1, [r0] /* issue nop */ mov r1, #CMD_SDRAM_NOP str r1, [r0] mov r2, #0x0100 waitMDDR1: subs r2, r2, #1 bne waitMDDR1 /* delay loop */ /* issue precharge */ mov r1, #CMD_SDRAM_PRECHARGE str r1, [r0] /* issue autorefresh x 2 */ mov r1, #CMD_SDRAM_AUTOREFRESH str r1, [r0] str r1, [r0] /* mrs register ddr mobile */ ldr r0, REG_SDRAM_MRS mov r1, #0x33 str r1, [r0] /* emrs1 low-power register */ ldr r0, REG_SDRAM_EMRS1 /* self refresh on all banks */ mov r1, #0 str r1, [r0] ldr r0, REG_DLL_URD_CONTROL ldr r1, DLL_URD_CONTROL_VAL str r1, [r0] ldr r0, REG_DLL_LRD_CONTROL ldr r1, DLL_LRD_CONTROL_VAL str r1, [r0] ldr r0, REG_DLL_WRT_CONTROL ldr r1, DLL_WRT_CONTROL_VAL str r1, [r0] /* delay loop */ mov r0, #0x0100 waitMDDR2: subs r0, r0, #1 bne waitMDDR2 /* * Delay for SDRAM initialization. */ mov r0, #0x1800 4: subs r0, r0, #1 /* Decrement count. */ bne 4b b common_tc skip_sdram: ldr r0, REG_SDRAM_CONFIG str r3, [r0] common_tc: /* slow interface */ ldr r1, VAL_TC_EMIFS_CS0_CONFIG ldr r0, REG_TC_EMIFS_CS0_CONFIG str r1, [r0] /* Chip Select 0 */ ldr r1, VAL_TC_EMIFS_CS1_CONFIG ldr r0, REG_TC_EMIFS_CS1_CONFIG str r1, [r0] /* Chip Select 1 */ ldr r1, VAL_TC_EMIFS_CS3_CONFIG ldr r0, REG_TC_EMIFS_CS3_CONFIG str r1, [r0] /* Chip Select 3 */ ldr r1, VAL_TC_EMIFS_DWS ldr r0, REG_TC_EMIFS_DWS str r1, [r0] /* Enable EMIFS.RDY for CS1 (ether) */ #ifdef CONFIG_H2_OMAP1610 /* inserting additional 2 clock cycle hold time for LAN */ ldr r0, REG_TC_EMIFS_CS1_ADVANCED ldr r1, VAL_TC_EMIFS_CS1_ADVANCED str r1, [r0] #endif /* Start MPU Timer 1 */ ldr r0, REG_MPU_LOAD_TIMER ldr r1, VAL_MPU_LOAD_TIMER str r1, [r0] ldr r0, REG_MPU_CNTL_TIMER ldr r1, VAL_MPU_CNTL_TIMER str r1, [r0] /* back to arch calling code */ mov pc, lr /* the literal pools origin */ .ltorg REG_DEVICE_ID: /* 32 bits */ .word 0xfffe2004 REG_TC_EMIFS_CONFIG: .word 0xfffecc0c REG_TC_EMIFS_CS0_CONFIG: /* 32 bits */ .word 0xfffecc10 REG_TC_EMIFS_CS1_CONFIG: /* 32 bits */ .word 0xfffecc14 REG_TC_EMIFS_CS2_CONFIG: /* 32 bits */ .word 0xfffecc18 REG_TC_EMIFS_CS3_CONFIG: /* 32 bits */ .word 0xfffecc1c REG_TC_EMIFS_DWS: /* 32 bits */ .word 0xfffecc40 #ifdef CONFIG_H2_OMAP1610 REG_TC_EMIFS_CS1_ADVANCED: /* 32 bits */ .word 0xfffecc54 #endif /* MPU clock/reset/power mode control registers */ REG_ARM_CKCTL: /* 16 bits */ .word 0xfffece00 REG_ARM_IDLECT3: /* 16 bits */ .word 0xfffece24 REG_ARM_IDLECT2: /* 16 bits */ .word 0xfffece08 REG_ARM_IDLECT1: /* 16 bits */ .word 0xfffece04 REG_ARM_RSTCT2: /* 16 bits */ .word 0xfffece14 REG_ARM_SYSST: /* 16 bits */ .word 0xfffece18 /* DPLL control registers */ REG_DPLL1_CTL: /* 16 bits */ .word 0xfffecf00 /* Watch Dog register */ /* secure watchdog stop */ REG_WSPRDOG: .word 0xfffeb048 /* watchdog write pending */ REG_WWPSDOG: .word 0xfffeb034 WSPRDOG_VAL1: .word 0x0000aaaa WSPRDOG_VAL2: .word 0x00005555 /* SDRAM config is: auto refresh enabled, 16 bit 4 bank, counter @8192 rows, 10 ns, 8 burst */ REG_SDRAM_CONFIG: .word 0xfffecc20 REG_SDRAM_CONFIG2: .word 0xfffecc3c REG_TC_EMIFF_DOUBLER: /* 32 bits */ .word 0xfffecc60 /* Operation register */ REG_SDRAM_OPERATION: .word 0xfffecc80 /* Manual command register */ REG_SDRAM_MANUAL_CMD: .word 0xfffecc84 /* SDRAM MRS (New) config is: CAS latency is 2, burst length 8 */ REG_SDRAM_MRS: .word 0xfffecc70 /* SDRAM MRS (New) config is: CAS latency is 2, burst length 8 */ REG_SDRAM_EMRS1: .word 0xfffecc78 /* WRT DLL register */ REG_DLL_WRT_CONTROL: .word 0xfffecc68 DLL_WRT_CONTROL_VAL: .word 0x03f00002 /* Phase of 72deg, write offset +31 */ /* URD DLL register */ REG_DLL_URD_CONTROL: .word 0xfffeccc0 DLL_URD_CONTROL_VAL: .word 0x00800002 /* Phase of 72deg, read offset +31 */ /* LRD DLL register */ REG_DLL_LRD_CONTROL: .word 0xfffecccc DLL_LRD_CONTROL_VAL: .word 0x00800002 /* read offset +31 */ REG_WATCHDOG: .word 0xfffec808 WATCHDOG_VAL1: .word 0x000000f5 WATCHDOG_VAL2: .word 0x000000a0 REG_MPU_LOAD_TIMER: .word 0xfffec504 REG_MPU_CNTL_TIMER: .word 0xfffec500 VAL_MPU_LOAD_TIMER: .word 0xffffffff VAL_MPU_CNTL_TIMER: .word 0xffffffa1 /* 96 MHz Samsung Mobile DDR */ /* Original setting for TMX device */ VAL_SDRAM_CONFIG_SDF0: .word 0x0014e6fe /* NEW_SYS_FREQ mode (valid only TMP/TMS devices) */ VAL_SDRAM_CONFIG_SDF1: .word 0x0114e6fe VAL_ARM_CKCTL: .word 0x2000 /* was: 0x3000, now use CLK_REF for timer input */ VAL_DPLL1_CTL: .word 0x2830 #ifdef CONFIG_OSK_OMAP5912 VAL_TC_EMIFS_CS0_CONFIG: .word 0x002130b0 VAL_TC_EMIFS_CS1_CONFIG: .word 0x00001133 VAL_TC_EMIFS_CS2_CONFIG: .word 0x000055f0 VAL_TC_EMIFS_CS3_CONFIG: .word 0x88013141 VAL_TC_EMIFS_DWS: /* Enable EMIFS.RDY for CS1 access (ether) */ .word 0x000000c0 VAL_DEVICE_ID_TMP: /* TMP/TMS=0xb65f, TMX=0xb58c */ .word 0xb65f #endif #ifdef CONFIG_H2_OMAP1610 VAL_TC_EMIFS_CS0_CONFIG: .word 0x00203331 VAL_TC_EMIFS_CS1_CONFIG: .word 0x8180fff3 VAL_TC_EMIFS_CS2_CONFIG: .word 0xf800f22a VAL_TC_EMIFS_CS3_CONFIG: .word 0x88013141 VAL_TC_EMIFS_CS1_ADVANCED: .word 0x00000022 #endif VAL_ARM_IDLECT1: .word 0x00000400 VAL_ARM_IDLECT2: .word 0x00000886 VAL_ARM_IDLECT3: .word 0x00000015 /* command values */ .equ CMD_SDRAM_NOP, 0x00000000 .equ CMD_SDRAM_PRECHARGE, 0x00000001 .equ CMD_SDRAM_AUTOREFRESH, 0x00000002 .equ CMD_SDRAM_CKE_SET_HIGH, 0x00000007