/* * (C) Copyright 2002 * Sysgo Real-Time Solutions, GmbH <www.elinos.com> * Marius Groeger <mgroeger@sysgo.de> * * (C) Copyright 2002 * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> * * (C) Copyright 2003 * Texas Instruments, <www.ti.com> * Kshitij Gupta <Kshitij@ti.com> * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include <common.h> DECLARE_GLOBAL_DATA_PTR; static void flash__init (void); static void ether__init (void); static inline void delay (unsigned long loops) { __asm__ volatile ("1:\n" "subs %0, %1, #1\n" "bne 1b":"=r" (loops):"0" (loops)); } /* * Miscellaneous platform dependent initialisations */ int board_init (void) { /* arch number of OMAP 1510-Board */ gd->bd->bi_arch_number = MACH_TYPE_OMAP_INNOVATOR; /* adress of boot parameters */ gd->bd->bi_boot_params = 0x10000100; /* kk - this speeds up your boot a quite a bit. However to make it * work, you need make sure your kernel startup flush bug is fixed. * ... rkw ... */ icache_enable (); flash__init (); ether__init (); return 0; } int misc_init_r (void) { /* volatile ushort *gdir = (ushort *) (GPIO_DIR_CONTROL_REG); */ /* volatile ushort *mdir = (ushort *) (MPUIO_DIR_CONTROL_REG); */ /* setup gpio direction to match board (no floats!) */ /**gdir = 0xCFF9; */ /**mdir = 0x103F; */ return (0); } /****************************** Routine: Description: ******************************/ static void flash__init (void) { #define CS0_CHIP_SELECT_REG 0xfffecc10 #define CS3_CHIP_SELECT_REG 0xfffecc1c #define EMIFS_GlB_Config_REG 0xfffecc0c { unsigned int regval; regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG); regval = regval | 0x0001; /* Turn off write protection for flash devices. */ if (regval & 0x0002) { regval = regval & 0xfffd; /* Swap CS0 and CS3 so that flash is visible at 0x0 and eeprom at 0x0c000000. */ /* If, instead, you want to reference flash at 0x0c000000, then it seemed the following were necessary. */ /* *((volatile unsigned int *)CS0_CHIP_SELECT_REG) = 0x202090; / * Overrides head.S setting of 0x212090 */ /* *((volatile unsigned int *)CS3_CHIP_SELECT_REG) = 0x202090; / * Let's flash chips be fully functional. */ } *((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval; } } /****************************** Routine: Description: ******************************/ static void ether__init (void) { #define ETH_CONTROL_REG 0x0800000b /* take the Ethernet controller out of reset and wait * for the EEPROM load to complete. */ *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01; udelay (3); } int dram_init (void) { gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; return 0; }