/* * (C) Copyright 2001 * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net * * (C) Copyright 2001-2002 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include <common.h> #include <malloc.h> #include <mpc8xx.h> #include <net.h> DECLARE_GLOBAL_DATA_PTR; static long int dram_size (long int, long int *, long int); #define _NOT_USED_ 0xFFFFFFFF const uint sdram_table[] = { #if (MPC8XX_SPEED <= 50000000L) /* * Single Read. (Offset 0 in UPMA RAM) */ 0x0F07EC04, 0x01BBD804, 0x1FF7F440, 0xFFFFFC07, 0xFFFFFFFF, /* * SDRAM Initialization (offset 5 in UPMA RAM) * * This is no UPM entry point. The following definition uses * the remaining space to establish an initialization * sequence, which is executed by a RUN command. * */ 0x1FE7F434, 0xEFABE834, 0x1FA7D435, /* * Burst Read. (Offset 8 in UPMA RAM) */ 0x0F07EC04, 0x10EFDC04, 0xF0AFFC00, 0xF0AFFC00, 0xF1AFFC00, 0xFFAFFC40, 0xFFAFFC07, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, /* * Single Write. (Offset 18 in UPMA RAM) */ 0x0E07E804, 0x01BBD000, 0x1FF7F447, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, /* * Burst Write. (Offset 20 in UPMA RAM) */ 0x0E07E800, 0x10EFD400, 0xF0AFFC00, 0xF0AFFC00, 0xF1AFFC47, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, /* * Refresh (Offset 30 in UPMA RAM) */ 0x1FF7DC84, 0xFFFFFC04, 0xFFFFFC84, 0xFFFFFC07, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, /* * Exception. (Offset 3c in UPMA RAM) */ 0x7FFFFC07, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF #else /* * Single Read. (Offset 0 in UPMA RAM) */ 0x1F07FC04, 0xEEAFEC04, 0x11AFDC04, 0xEFBBF800, 0x1FF7F447, /* * SDRAM Initialization (offset 5 in UPMA RAM) * * This is no UPM entry point. The following definition uses * the remaining space to establish an initialization * sequence, which is executed by a RUN command. * */ 0x1FF7F434, 0xEFEBE834, 0x1FB7D435, /* * Burst Read. (Offset 8 in UPMA RAM) */ 0x1F07FC04, 0xEEAFEC04, 0x10AFDC04, 0xF0AFFC00, 0xF0AFFC00, 0xF1AFFC00, 0xEFBBF800, 0x1FF7F447, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Single Write. (Offset 18 in UPMA RAM) */ 0x1F07FC04, 0xEEAFE800, 0x01BBD004, 0x1FF7F447, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Burst Write. (Offset 20 in UPMA RAM) */ 0x1F07FC04, 0xEEAFE800, 0x10AFD400, 0xF0AFFC00, 0xF0AFFC00, 0xE1BBF804, 0x1FF7F447, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Refresh (Offset 30 in UPMA RAM) */ 0x1FF7DC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC84, 0xFFFFFC07, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Exception. (Offset 3c in UPMA RAM) */ 0x7FFFFC07, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, #endif }; /* ------------------------------------------------------------------------- */ /* * Check Board Identity: * */ int checkboard (void) { printf ("Board: Nexus NX823"); return (0); } /* ------------------------------------------------------------------------- */ phys_size_t initdram (int board_type) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; long int size_b0, size_b1, size8, size9; upmconfig (UPMA, (uint *) sdram_table, sizeof (sdram_table) / sizeof (uint)); /* * Up to 2 Banks of 64Mbit x 2 devices * Initial builds only have 1 */ memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_4K; memctl->memc_mar = 0x00000088; /* * Map controller SDRAM bank 0 */ memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */ udelay (200); /* * Map controller SDRAM bank 1 */ memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM; memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM; /* * Perform SDRAM initializsation sequence */ memctl->memc_mcr = 0x80002105; /* SDRAM bank 0 */ udelay (1); memctl->memc_mcr = 0x80002230; /* SDRAM bank 0 - execute twice */ udelay (1); memctl->memc_mcr = 0x80004105; /* SDRAM bank 1 */ udelay (1); memctl->memc_mcr = 0x80004230; /* SDRAM bank 1 - execute twice */ udelay (1); memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ udelay (1000); /* * Preliminary prescaler for refresh (depends on number of * banks): This value is selected for four cycles every 62.4 us * with two SDRAM banks or four cycles every 31.2 us with one * bank. It will be adjusted after memory sizing. */ memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K; memctl->memc_mar = 0x00000088; /* * Check Bank 0 Memory Size for re-configuration * * try 8 column mode */ size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE); udelay (1000); /* * try 9 column mode */ size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE); if (size8 < size9) { /* leave configuration at 9 columns */ size_b0 = size9; /* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */ } else { /* back to 8 columns */ size_b0 = size8; memctl->memc_mamr = CONFIG_SYS_MAMR_8COL; udelay (500); /* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */ } /* * Check Bank 1 Memory Size * use current column settings * [9 column SDRAM may also be used in 8 column mode, * but then only half the real size will be used.] */ size_b1 = dram_size (memctl->memc_mamr, (long *) SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE); /* debug ("SDRAM Bank 1: %ld MB\n", size8 >> 20); */ udelay (1000); /* * Adjust refresh rate depending on SDRAM type, both banks * For types > 128 MBit leave it at the current (fast) rate */ if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) { /* reduce to 15.6 us (62.4 us / quad) */ memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K; udelay (1000); } /* * Final mapping: map bigger bank first */ if (size_b1 > size_b0) { /* SDRAM Bank 1 is bigger - map first */ memctl->memc_or2 = ((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; memctl->memc_br2 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; if (size_b0 > 0) { /* * Position Bank 0 immediately above Bank 1 */ memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; memctl->memc_br1 = ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V) + size_b1; } else { unsigned long reg; /* * No bank 0 * * invalidate bank */ memctl->memc_br1 = 0; /* adjust refresh rate depending on SDRAM type, one bank */ reg = memctl->memc_mptpr; reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */ memctl->memc_mptpr = reg; } } else { /* SDRAM Bank 0 is bigger - map first */ memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; if (size_b1 > 0) { /* * Position Bank 1 immediately above Bank 0 */ memctl->memc_or2 = ((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; memctl->memc_br2 = ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V) + size_b0; } else { unsigned long reg; /* * No bank 1 * * invalidate bank */ memctl->memc_br2 = 0; /* adjust refresh rate depending on SDRAM type, one bank */ reg = memctl->memc_mptpr; reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */ memctl->memc_mptpr = reg; } } udelay (10000); return (size_b0 + size_b1); } /* ------------------------------------------------------------------------- */ /* * Check memory range for valid RAM. A simple memory test determines * the actually available RAM size between addresses `base' and * `base + maxsize'. Some (not all) hardware errors are detected: * - short between address lines * - short between data lines */ static long int dram_size (long int mamr_value, long int *base, long int maxsize) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; memctl->memc_mamr = mamr_value; return (get_ram_size (base, maxsize)); } int misc_init_r (void) { int i; char tmp[50]; uchar ethaddr[6]; bd_t *bd = gd->bd; ulong *my_sernum = (unsigned long *)&bd->bi_sernum; /* load unique serial number */ for (i = 0; i < 8; ++i) bd->bi_sernum[i] = *(u_char *) (CONFIG_SYS_FLASH_SN_BASE + i); /* save env variables according to sernum */ sprintf (tmp, "%08lx%08lx", my_sernum[0], my_sernum[1]); setenv ("serial#", tmp); if (!eth_getenv_enetaddr("ethaddr", ethaddr)) { ethaddr[0] = 0x10; ethaddr[1] = 0x20; ethaddr[2] = 0x30; ethaddr[3] = bd->bi_sernum[1] << 4 | bd->bi_sernum[2]; ethaddr[4] = bd->bi_sernum[5]; ethaddr[5] = bd->bi_sernum[6]; } return 0; }