/* * Memory Setup stuff - taken from blob memsetup.S * * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) * * Modified for the Samsung SMDK2410 by * (C) Copyright 2002 * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include <config.h> #include <version.h> /* some parameters for the board */ #define BWSCON 0x48000000 #define PLD_BASE 0x2C000000 #define SDRAM_REG 0x2C000106 /* BWSCON */ #define DW8 (0x0) #define DW16 (0x1) #define DW32 (0x2) #define WAIT (0x1<<2) #define UBLB (0x1<<3) /* BANKSIZE */ #define BURST_EN (0x1<<7) #define B1_BWSCON (DW16) #define B2_BWSCON (DW32) #define B3_BWSCON (DW32) #define B4_BWSCON (DW16 + WAIT + UBLB) #define B5_BWSCON (DW8 + UBLB) #define B6_BWSCON (DW32) #define B7_BWSCON (DW32) /* BANK0CON */ #define B0_Tacs 0x0 /* 0clk */ #define B0_Tcos 0x1 /* 1clk */ /*#define B0_Tcos 0x0 0clk */ #define B0_Tacc 0x7 /* 14clk */ /*#define B0_Tacc 0x5 8clk */ #define B0_Tcoh 0x0 /* 0clk */ #define B0_Tah 0x0 /* 0clk */ #define B0_Tacp 0x0 /* page mode is not used */ #define B0_PMC 0x0 /* page mode disabled */ /* BANK1CON */ #define B1_Tacs 0x0 /* 0clk */ #define B1_Tcos 0x1 /* 1clk */ /*#define B1_Tcos 0x0 0clk */ #define B1_Tacc 0x7 /* 14clk */ /*#define B1_Tacc 0x5 8clk */ #define B1_Tcoh 0x0 /* 0clk */ #define B1_Tah 0x0 /* 0clk */ #define B1_Tacp 0x0 /* page mode is not used */ #define B1_PMC 0x0 /* page mode disabled */ #define B2_Tacs 0x3 /* 4clk */ #define B2_Tcos 0x3 /* 4clk */ #define B2_Tacc 0x7 /* 14clk */ #define B2_Tcoh 0x3 /* 4clk */ #define B2_Tah 0x3 /* 4clk */ #define B2_Tacp 0x0 /* page mode is not used */ #define B2_PMC 0x0 /* page mode disabled */ #define B3_Tacs 0x3 /* 4clk */ #define B3_Tcos 0x3 /* 4clk */ #define B3_Tacc 0x7 /* 14clk */ #define B3_Tcoh 0x3 /* 4clk */ #define B3_Tah 0x3 /* 4clk */ #define B3_Tacp 0x0 /* page mode is not used */ #define B3_PMC 0x0 /* page mode disabled */ #define B4_Tacs 0x3 /* 4clk */ #define B4_Tcos 0x1 /* 1clk */ #define B4_Tacc 0x7 /* 14clk */ #define B4_Tcoh 0x1 /* 1clk */ #define B4_Tah 0x0 /* 0clk */ #define B4_Tacp 0x0 /* page mode is not used */ #define B4_PMC 0x0 /* page mode disabled */ #define B5_Tacs 0x0 /* 0clk */ #define B5_Tcos 0x3 /* 4clk */ #define B5_Tacc 0x5 /* 8clk */ #define B5_Tcoh 0x2 /* 2clk */ #define B5_Tah 0x1 /* 1clk */ #define B5_Tacp 0x0 /* page mode is not used */ #define B5_PMC 0x0 /* page mode disabled */ #define B6_MT 0x3 /* SDRAM */ #define B6_Trcd 0x1 /* 3clk */ #define B6_SCAN 0x2 /* 10bit */ #define B7_MT 0x3 /* SDRAM */ #define B7_Trcd 0x1 /* 3clk */ #define B7_SCAN 0x2 /* 10bit */ /* REFRESH parameter */ #define REFEN 0x1 /* Refresh enable */ #define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ #define Trp 0x0 /* 2clk */ #define Trc 0x3 /* 7clk */ #define Tchr 0x2 /* 3clk */ #define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ /**************************************/ _TEXT_BASE: .word TEXT_BASE .globl lowlevel_init lowlevel_init: /* memory control configuration */ /* make r0 relative the current location so that it */ /* reads SMRDATA out of FLASH rather than memory ! */ ldr r0, =CSDATA ldr r1, _TEXT_BASE sub r0, r0, r1 ldr r1, =BWSCON /* Bus Width Status Controller */ add r2, r0, #CSDATA_END-CSDATA 0: ldr r3, [r0], #4 str r3, [r1], #4 cmp r2, r0 bne 0b /* PLD access is now possible */ /* r0 == SDRAMDATA */ /* r1 == SDRAM controller regs */ ldr r2, =PLD_BASE ldrb r3, [r2, #SDRAM_REG-PLD_BASE] mov r4, #SDRAMDATA1_END-SDRAMDATA /* calculate start and end point */ mla r0, r3, r4, r0 add r2, r0, r4 0: ldr r3, [r0], #4 str r3, [r1], #4 cmp r2, r0 bne 0b /* everything is fine now */ mov pc, lr .ltorg /* the literal pools origin */ CSDATA: .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) CSDATA_END: SDRAMDATA: /* 4Mx8x4 */ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) .word 0x32 + BURST_EN .word 0x30 .word 0x30 SDRAMDATA1_END: /* 8Mx8x4 (not implemented yet) */ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) .word 0x32 + BURST_EN .word 0x30 .word 0x30 /* 2Mx8x4 (not implemented yet) */ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) .word 0x32 + BURST_EN .word 0x30 .word 0x30 /* 4Mx8x2 (not implemented yet) */ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) .word 0x32 + BURST_EN .word 0x30 .word 0x30