/* * Copyright (C) 2006 Freescale Semiconductor, Inc. * * Dave Liu * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. */ #include #include #include #include #include #include #include #if defined(CONFIG_PCI) #include #endif #if defined(CONFIG_SPD_EEPROM) #include #else #include #endif #if defined(CONFIG_OF_FLAT_TREE) #include #elif defined(CONFIG_OF_LIBFDT) #include #endif #if defined(CONFIG_PQ_MDS_PIB) #include "../freescale/common/pq-mds-pib.h" #endif const qe_iop_conf_t qe_iop_conf_tab[] = { /* ETH3 */ {1, 0, 1, 0, 1}, /* TxD0 */ {1, 1, 1, 0, 1}, /* TxD1 */ {1, 2, 1, 0, 1}, /* TxD2 */ {1, 3, 1, 0, 1}, /* TxD3 */ {1, 9, 1, 0, 1}, /* TxER */ {1, 12, 1, 0, 1}, /* TxEN */ {3, 24, 2, 0, 1}, /* TxCLK->CLK10 */ {1, 4, 2, 0, 1}, /* RxD0 */ {1, 5, 2, 0, 1}, /* RxD1 */ {1, 6, 2, 0, 1}, /* RxD2 */ {1, 7, 2, 0, 1}, /* RxD3 */ {1, 8, 2, 0, 1}, /* RxER */ {1, 10, 2, 0, 1}, /* RxDV */ {0, 13, 2, 0, 1}, /* RxCLK->CLK9 */ {1, 11, 2, 0, 1}, /* COL */ {1, 13, 2, 0, 1}, /* CRS */ /* ETH4 */ {1, 18, 1, 0, 1}, /* TxD0 */ {1, 19, 1, 0, 1}, /* TxD1 */ {1, 20, 1, 0, 1}, /* TxD2 */ {1, 21, 1, 0, 1}, /* TxD3 */ {1, 27, 1, 0, 1}, /* TxER */ {1, 30, 1, 0, 1}, /* TxEN */ {3, 6, 2, 0, 1}, /* TxCLK->CLK8 */ {1, 22, 2, 0, 1}, /* RxD0 */ {1, 23, 2, 0, 1}, /* RxD1 */ {1, 24, 2, 0, 1}, /* RxD2 */ {1, 25, 2, 0, 1}, /* RxD3 */ {1, 26, 1, 0, 1}, /* RxER */ {1, 28, 2, 0, 1}, /* Rx_DV */ {3, 31, 2, 0, 1}, /* RxCLK->CLK7 */ {1, 29, 2, 0, 1}, /* COL */ {1, 31, 2, 0, 1}, /* CRS */ {3, 4, 3, 0, 2}, /* MDIO */ {3, 5, 1, 0, 2}, /* MDC */ {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ }; int board_early_init_f(void) { volatile u8 *bcsr = (volatile u8 *)CFG_BCSR; /* Enable flash write */ bcsr[9] &= ~0x08; return 0; } int board_early_init_r(void) { #ifdef CONFIG_PQ_MDS_PIB pib_init(); #endif return 0; } int fixed_sdram(void); long int initdram(int board_type) { volatile immap_t *im = (immap_t *) CFG_IMMR; u32 msize = 0; if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) return -1; /* DDR SDRAM - Main SODIMM */ im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; msize = fixed_sdram(); puts("\n DDR RAM: "); /* return total bus SDRAM size(bytes) -- DDR */ return (msize * 1024 * 1024); } /************************************************************************* * fixed sdram init -- doesn't use serial presence detect. ************************************************************************/ int fixed_sdram(void) { volatile immap_t *im = (immap_t *) CFG_IMMR; u32 msize = 0; u32 ddr_size; u32 ddr_size_log2; msize = CFG_DDR_SIZE; for (ddr_size = msize << 20, ddr_size_log2 = 0; (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { if (ddr_size & 1) { return -1; } } im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); #if (CFG_DDR_SIZE != 128) #warning Currenly any ddr size other than 128 is not supported #endif im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS; im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; im->ddr.sdram_mode = CFG_DDR_MODE; im->ddr.sdram_mode2 = CFG_DDR_MODE2; im->ddr.sdram_interval = CFG_DDR_INTERVAL; __asm__ __volatile__ ("sync"); udelay(200); im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; __asm__ __volatile__ ("sync"); return msize; } int checkboard(void) { puts("Board: Freescale MPC832XEMDS\n"); return 0; } #if defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { #if defined(CONFIG_OF_FLAT_TREE) u32 *p; int len; p = ft_get_prop(blob, "/memory/reg", &len); if (p != NULL) { *p++ = cpu_to_be32(bd->bi_memstart); *p = cpu_to_be32(bd->bi_memsize); } #endif ft_cpu_setup(blob, bd); #ifdef CONFIG_PCI ft_pci_setup(blob, bd); #endif } #endif