/* * (C) Copyright 2006 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include <common.h> #include <command.h> #include <malloc.h> #include <image.h> #include <asm/byteorder.h> #include <usb.h> #include <part.h> #ifdef CFG_HUSH_PARSER #include <hush.h> #endif #ifdef CONFIG_AUTO_UPDATE #ifndef CONFIG_USB_OHCI #error "must define CONFIG_USB_OHCI" #endif #ifndef CONFIG_USB_STORAGE #error "must define CONFIG_USB_STORAGE" #endif #ifndef CFG_HUSH_PARSER #error "must define CFG_HUSH_PARSER" #endif #if !defined(CONFIG_CMD_FAT) #error "must define CONFIG_CMD_FAT" #endif #undef AU_DEBUG #undef debug #ifdef AU_DEBUG #define debug(fmt,args...) printf (fmt ,##args) #else #define debug(fmt,args...) #endif /* AU_DEBUG */ /* possible names of files on the USB stick. */ #define AU_FIRMWARE "u-boot.img" #define AU_KERNEL "kernel.img" #define AU_ROOTFS "rootfs.img" struct flash_layout { long start; long end; }; /* layout of the FLASH. ST = start address, ND = end address. */ #define AU_FL_FIRMWARE_ST 0xfC000000 #define AU_FL_FIRMWARE_ND 0xfC03FFFF #define AU_FL_KERNEL_ST 0xfC0C0000 #define AU_FL_KERNEL_ND 0xfC1BFFFF #define AU_FL_ROOTFS_ST 0xFC1C0000 #define AU_FL_ROOTFS_ND 0xFCFBFFFF static int au_usb_stor_curr_dev; /* current device */ /* index of each file in the following arrays */ #define IDX_FIRMWARE 0 #define IDX_KERNEL 1 #define IDX_ROOTFS 2 /* max. number of files which could interest us */ #define AU_MAXFILES 3 /* pointers to file names */ char *aufile[AU_MAXFILES] = { AU_FIRMWARE, AU_KERNEL, AU_ROOTFS }; /* sizes of flash areas for each file */ long ausize[AU_MAXFILES] = { (AU_FL_FIRMWARE_ND + 1) - AU_FL_FIRMWARE_ST, (AU_FL_KERNEL_ND + 1) - AU_FL_KERNEL_ST, (AU_FL_ROOTFS_ND + 1) - AU_FL_ROOTFS_ST, }; /* array of flash areas start and end addresses */ struct flash_layout aufl_layout[AU_MAXFILES] = { { AU_FL_FIRMWARE_ST, AU_FL_FIRMWARE_ND, }, { AU_FL_KERNEL_ST, AU_FL_KERNEL_ND, }, { AU_FL_ROOTFS_ST, AU_FL_ROOTFS_ND, }, }; ulong totsize; /* where to load files into memory */ #define LOAD_ADDR ((unsigned char *)0x00200000) /* the root file system is the largest image */ #define MAX_LOADSZ ausize[IDX_ROOTFS] /*i2c address of the keypad status*/ #define I2C_PSOC_KEYPAD_ADDR 0x53 /* keypad mask */ #define KEYPAD_ROW 2 #define KEYPAD_COL 2 #define KEYPAD_MASK_LO ((1<<(KEYPAD_COL-1+(KEYPAD_ROW*3-3)))&0xFF) #define KEYPAD_MASK_HI ((1<<(KEYPAD_COL-1+(KEYPAD_ROW*3-3)))>>8) /* externals */ extern int fat_register_device(block_dev_desc_t *, int); extern int file_fat_detectfs(void); extern long file_fat_read(const char *, void *, unsigned long); extern int i2c_read (unsigned char, unsigned int, int , unsigned char* , int); extern int flash_sect_erase(ulong, ulong); extern int flash_sect_protect (int, ulong, ulong); extern int flash_write (char *, ulong, ulong); extern int u_boot_hush_start(void); #ifdef CONFIG_PROGRESSBAR extern void show_progress(int, int); extern void lcd_puts (char *); extern void lcd_enable(void); #endif int au_check_cksum_valid(int idx, long nbytes) { image_header_t *hdr; hdr = (image_header_t *)LOAD_ADDR; #if defined(CONFIG_FIT) if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) { puts ("Non legacy image format not supported\n"); return -1; } #endif if (nbytes != image_get_image_size (hdr)) { printf ("Image %s bad total SIZE\n", aufile[idx]); return -1; } /* check the data CRC */ if (!image_check_dcrc (hdr)) { printf ("Image %s bad data checksum\n", aufile[idx]); return -1; } return 0; } int au_check_header_valid(int idx, long nbytes) { image_header_t *hdr; unsigned long checksum, fsize; hdr = (image_header_t *)LOAD_ADDR; #if defined(CONFIG_FIT) if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) { puts ("Non legacy image format not supported\n"); return -1; } #endif /* check the easy ones first */ #undef CHECK_VALID_DEBUG #ifdef CHECK_VALID_DEBUG printf("magic %#x %#x ", image_get_magic (hdr), IH_MAGIC); printf("arch %#x %#x ", image_get_arch (hdr), IH_ARCH_ARM); printf("size %#x %#lx ", image_get_data_size (hdr), nbytes); printf("type %#x %#x ", image_get_type (hdr), IH_TYPE_KERNEL); #endif if (nbytes < image_get_header_size ()) { printf ("Image %s bad header SIZE\n", aufile[idx]); ausize[idx] = 0; return -1; } if (!image_check_magic (hdr) || !image_check_arch (hdr, IH_ARCH_PPC)) { printf ("Image %s bad MAGIC or ARCH\n", aufile[idx]); ausize[idx] = 0; return -1; } /* check the hdr CRC */ if (!image_check_hcrc (hdr)) { printf ("Image %s bad header checksum\n", aufile[idx]); ausize[idx] = 0; return -1; } /* check the type - could do this all in one gigantic if() */ if ((idx == IDX_FIRMWARE) && !image_check_type (hdr, IH_TYPE_FIRMWARE)) { printf ("Image %s wrong type\n", aufile[idx]); ausize[idx] = 0; return -1; } if ((idx == IDX_KERNEL) && !image_check_type (hdr, IH_TYPE_KERNEL)) { printf ("Image %s wrong type\n", aufile[idx]); ausize[idx] = 0; return -1; } if ((idx == IDX_ROOTFS) && (!image_check_type (hdr, IH_TYPE_RAMDISK) && !image_check_type (hdr, IH_TYPE_FILESYSTEM))) { printf ("Image %s wrong type\n", aufile[idx]); ausize[idx] = 0; return -1; } /* recycle checksum */ checksum = image_get_data_size (hdr); fsize = checksum + image_get_header_size (); /* for kernel and ramdisk the image header must also fit into flash */ if (idx == IDX_KERNEL || image_check_type (hdr, IH_TYPE_RAMDISK)) checksum += image_get_header_size (); /* check the size does not exceed space in flash. HUSH scripts */ if ((ausize[idx] != 0) && (ausize[idx] < checksum)) { printf ("Image %s is bigger than FLASH\n", aufile[idx]); ausize[idx] = 0; return -1; } /* Update with the real filesize */ ausize[idx] = fsize; return checksum; /* return size to be written to flash */ } int au_do_update(int idx, long sz) { image_header_t *hdr; char *addr; long start, end; int off, rc; uint nbytes; hdr = (image_header_t *)LOAD_ADDR; #if defined(CONFIG_FIT) if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) { puts ("Non legacy image format not supported\n"); return -1; } #endif /* execute a script */ if (image_check_type (hdr, IH_TYPE_SCRIPT)) { addr = (char *)((char *)hdr + image_get_header_size ()); /* stick a NULL at the end of the script, otherwise */ /* parse_string_outer() runs off the end. */ addr[image_get_data_size (hdr)] = 0; addr += 8; parse_string_outer(addr, FLAG_PARSE_SEMICOLON); return 0; } start = aufl_layout[idx].start; end = aufl_layout[idx].end; /* unprotect the address range */ /* this assumes that ONLY the firmware is protected! */ if (idx == IDX_FIRMWARE) { #undef AU_UPDATE_TEST #ifdef AU_UPDATE_TEST /* erase it where Linux goes */ start = aufl_layout[1].start; end = aufl_layout[1].end; #endif flash_sect_protect(0, start, end); } /* * erase the address range. */ debug ("flash_sect_erase(%lx, %lx);\n", start, end); flash_sect_erase(start, end); wait_ms(100); #ifdef CONFIG_PROGRESSBAR show_progress(end - start, totsize); #endif /* strip the header - except for the kernel and ramdisk */ if (image_check_type (hdr, IH_TYPE_KERNEL) || image_check_type (hdr, IH_TYPE_RAMDISK)) { addr = (char *)hdr; off = image_get_header_size (); nbytes = image_get_image_size (hdr); } else { addr = (char *)((char *)hdr + image_get_header_size ()); #ifdef AU_UPDATE_TEST /* copy it to where Linux goes */ if (idx == IDX_FIRMWARE) start = aufl_layout[1].start; #endif off = 0; nbytes = image_get_data_size (hdr); } /* copy the data from RAM to FLASH */ debug ("flash_write(%p, %lx %x)\n", addr, start, nbytes); rc = flash_write(addr, start, nbytes); if (rc != 0) { printf("Flashing failed due to error %d\n", rc); return -1; } #ifdef CONFIG_PROGRESSBAR show_progress(nbytes, totsize); #endif /* check the data CRC of the copy */ if (crc32 (0, (uchar *)(start + off), image_get_data_size (hdr)) != image_get_dcrc (hdr)) { printf ("Image %s Bad Data Checksum after COPY\n", aufile[idx]); return -1; } /* protect the address range */ /* this assumes that ONLY the firmware is protected! */ if (idx == IDX_FIRMWARE) flash_sect_protect(1, start, end); return 0; } /* * this is called from board_init() after the hardware has been set up * and is usable. That seems like a good time to do this. * Right now the return value is ignored. */ int do_auto_update(void) { block_dev_desc_t *stor_dev; long sz; int i, res = 0, bitmap_first, cnt, old_ctrlc, got_ctrlc; char *env; long start, end; #if 0 /* disable key-press detection to speed up boot-up time */ uchar keypad_status1[2] = {0,0}, keypad_status2[2] = {0,0}; /* * Read keypad status */ i2c_read(I2C_PSOC_KEYPAD_ADDR, 0, 0, keypad_status1, 2); wait_ms(500); i2c_read(I2C_PSOC_KEYPAD_ADDR, 0, 0, keypad_status2, 2); /* * Check keypad */ if ( !(keypad_status1[1] & KEYPAD_MASK_LO) || (keypad_status1[1] != keypad_status2[1])) { return 0; } #endif au_usb_stor_curr_dev = -1; /* start USB */ if (usb_stop() < 0) { debug ("usb_stop failed\n"); return -1; } if (usb_init() < 0) { debug ("usb_init failed\n"); return -1; } /* * check whether a storage device is attached (assume that it's * a USB memory stick, since nothing else should be attached). */ au_usb_stor_curr_dev = usb_stor_scan(0); if (au_usb_stor_curr_dev == -1) { debug ("No device found. Not initialized?\n"); res = -1; goto xit; } /* check whether it has a partition table */ stor_dev = get_dev("usb", 0); if (stor_dev == NULL) { debug ("uknown device type\n"); res = -1; goto xit; } if (fat_register_device(stor_dev, 1) != 0) { debug ("Unable to use USB %d:%d for fatls\n", au_usb_stor_curr_dev, 1); res = -1; goto xit; } if (file_fat_detectfs() != 0) { debug ("file_fat_detectfs failed\n"); } /* * now check whether start and end are defined using environment * variables. */ start = -1; end = 0; env = getenv("firmware_st"); if (env != NULL) start = simple_strtoul(env, NULL, 16); env = getenv("firmware_nd"); if (env != NULL) end = simple_strtoul(env, NULL, 16); if (start >= 0 && end && end > start) { ausize[IDX_FIRMWARE] = (end + 1) - start; aufl_layout[IDX_FIRMWARE].start = start; aufl_layout[IDX_FIRMWARE].end = end; } start = -1; end = 0; env = getenv("kernel_st"); if (env != NULL) start = simple_strtoul(env, NULL, 16); env = getenv("kernel_nd"); if (env != NULL) end = simple_strtoul(env, NULL, 16); if (start >= 0 && end && end > start) { ausize[IDX_KERNEL] = (end + 1) - start; aufl_layout[IDX_KERNEL].start = start; aufl_layout[IDX_KERNEL].end = end; } start = -1; end = 0; env = getenv("rootfs_st"); if (env != NULL) start = simple_strtoul(env, NULL, 16); env = getenv("rootfs_nd"); if (env != NULL) end = simple_strtoul(env, NULL, 16); if (start >= 0 && end && end > start) { ausize[IDX_ROOTFS] = (end + 1) - start; aufl_layout[IDX_ROOTFS].start = start; aufl_layout[IDX_ROOTFS].end = end; } /* make certain that HUSH is runnable */ u_boot_hush_start(); /* make sure that we see CTRL-C and save the old state */ old_ctrlc = disable_ctrlc(0); bitmap_first = 0; /* validate the images first */ for (i = 0; i < AU_MAXFILES; i++) { ulong imsize; /* just read the header */ sz = file_fat_read(aufile[i], LOAD_ADDR, image_get_header_size ()); debug ("read %s sz %ld hdr %d\n", aufile[i], sz, image_get_header_size ()); if (sz <= 0 || sz < image_get_header_size ()) { debug ("%s not found\n", aufile[i]); ausize[i] = 0; continue; } /* au_check_header_valid() updates ausize[] */ if ((imsize = au_check_header_valid(i, sz)) < 0) { debug ("%s header not valid\n", aufile[i]); continue; } /* totsize accounts for image size and flash erase size */ totsize += (imsize + (aufl_layout[i].end - aufl_layout[i].start)); } #ifdef CONFIG_PROGRESSBAR if (totsize) { lcd_puts(" Update in progress\n"); lcd_enable(); } #endif /* just loop thru all the possible files */ for (i = 0; i < AU_MAXFILES && totsize; i++) { if (!ausize[i]) { continue; } sz = file_fat_read(aufile[i], LOAD_ADDR, ausize[i]); debug ("read %s sz %ld hdr %d\n", aufile[i], sz, image_get_header_size ()); if (sz != ausize[i]) { printf ("%s: size %d read %d?\n", aufile[i], ausize[i], sz); continue; } if (sz <= 0 || sz <= image_get_header_size ()) { debug ("%s not found\n", aufile[i]); continue; } if (au_check_cksum_valid(i, sz) < 0) { debug ("%s checksum not valid\n", aufile[i]); continue; } /* this is really not a good idea, but it's what the */ /* customer wants. */ cnt = 0; got_ctrlc = 0; do { res = au_do_update(i, sz); /* let the user break out of the loop */ if (ctrlc() || had_ctrlc()) { clear_ctrlc(); if (res < 0) got_ctrlc = 1; break; } cnt++; #ifdef AU_TEST_ONLY } while (res < 0 && cnt < (AU_MAXFILES + 1)); if (cnt < (AU_MAXFILES + 1)) #else } while (res < 0); #endif } /* restore the old state */ disable_ctrlc(old_ctrlc); #ifdef CONFIG_PROGRESSBAR if (totsize) { if (!res) { lcd_puts("\n Update completed\n"); } else { lcd_puts("\n Update error\n"); } lcd_enable(); } #endif xit: usb_stop(); return res; } #endif /* CONFIG_AUTO_UPDATE */