/* * (C) Copyright 2000 * Sysgo Real-Time Solutions, GmbH <www.elinos.com> * Marius Groeger <mgroeger@sysgo.de> * * Board specific routines for the MBX * * - initialisation * - interface to VPD data (mac address, clock speeds) * - memory controller * - serial io initialisation * - ethernet io initialisation * * ----------------------------------------------------------------- * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include <common.h> #include <commproc.h> #include <mpc8xx.h> #include <net.h> #include "dimm.h" #include "vpd.h" #include "csr.h" /* ------------------------------------------------------------------------- */ static const uint sdram_table_40[] = { /* DRAM - single read. (offset 0 in upm RAM) */ 0xCFAFC004, 0x0FAFC404, 0x0CAF0C04, 0x30AF0C00, 0xF1BF4805, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005, /* DRAM - burst read. (offset 8 in upm RAM) */ 0xCFAFC004, 0x0FAFC404, 0x0CAF0C04, 0x03AF0C08, 0x0CAF0C04, 0x03AF0C08, 0x0CAF0C04, 0x03AF0C08, 0x0CAF0C04, 0x30AF0C00, 0xF3BF4805, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005, /* DRAM - single write. (offset 18 in upm RAM) */ 0xCFFF0004, 0x0FFF0404, 0x0CFF0C00, 0x33FF4804, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005, /* DRAM - burst write. (offset 20 in upm RAM) */ 0xCFFF0004, 0x0FFF0404, 0x0CFF0C00, 0x03FF0C0C, 0x0CFF0C00, 0x03FF0C0C, 0x0CFF0C00, 0x03FF0C0C, 0x0CFF0C00, 0x33FF4804, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005, /* refresh (offset 30 in upm RAM) */ 0xFCFFC004, 0xC0FFC004, 0x01FFC004, 0x0FFFC004, 0x3FFFC004, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005, /* exception. (offset 3c in upm RAM) */ 0xFFFFC007, 0xFFFFC007, 0xFFFFC007, 0xFFFFC007, }; static const uint sdram_table_50[] = { /* DRAM - single read. (offset 0 in upm RAM) */ 0xCFAFC004, 0x0FAFC404, 0x0CAF8C04, 0x10AF0C04, 0xF0AF0C00, 0xF3BF4805, 0xFFFFC005, 0xFFFFC005, /* DRAM - burst read. (offset 8 in upm RAM) */ 0xCFAFC004, 0X0FAFC404, 0X0CAF8C04, 0X00AF0C04, /* 0X07AF0C08, 0X0CAF0C04, 0X01AF0C04, 0X0FAF0C04, */ 0X07AF0C08, 0X0CAF0C04, 0X01AF0C04, 0X0FAF0C08, 0X0CAF0C04, 0X01AF0C04, 0X0FAF0C08, 0X0CAF0C04, /* 0X10AF0C04, 0XF0AFC000, 0XF3FF4805, 0XFFFFC005, */ 0X10AF0C04, 0XF0AFC000, 0XF3BF4805, 0XFFFFC005, /* DRAM - single write. (offset 18 in upm RAM) */ 0xCFFF0004, 0x0FFF0404, 0x0CFF0C00, 0x13FF4804, 0xFFFFC004, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005, /* DRAM - burst write. (offset 20 in upm RAM) */ 0xCFFF0004, 0x0FFF0404, 0x0CFF0C00, 0x03FF0C0C, 0x0CFF0C00, 0x03FF0C0C, 0x0CFF0C00, 0x03FF0C0C, 0x0CFF0C00, 0x13FF4804, 0xFFFFC004, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005, /* refresh (offset 30 in upm RAM) */ 0xFCFFC004, 0xC0FFC004, 0x01FFC004, 0x0FFFC004, 0x1FFFC004, 0xFFFFC004, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005, /* exception. (offset 3c in upm RAM) */ 0xFFFFC007, 0xFFFFC007, 0xFFFFC007, 0xFFFFC007, }; /* ------------------------------------------------------------------------- */ #ifdef CONFIG_SYS_USE_OSCCLK static unsigned int get_reffreq(void); #endif static unsigned int board_get_cpufreq(void); void mbx_init (void) { volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immr->im_memctl; ulong speed, plprcr, sccr; ulong br0_32 = memctl->memc_br0 & 0x400; /* real-time clock status and control register */ immr->im_sitk.sitk_rtcsck = KAPWR_KEY; immr->im_sit.sit_rtcsc = 0x00C3; /* SIEL and SIMASK Registers (see MBX PRG 2-3) */ immr->im_siu_conf.sc_simask = 0x00000000; immr->im_siu_conf.sc_siel = 0xAAAA0000; immr->im_siu_conf.sc_tesr = 0xFFFFFFFF; /* * Prepare access to i2c bus. The MBX offers 3 devices on the i2c bus: * 1. Vital Product Data (contains clock speeds, MAC address etc, see vpd.h) * 2. RAM Specs (see dimm.h) * 2. DIMM Specs (see dimm.h) */ vpd_init (); /* system clock and reset control register */ immr->im_clkrstk.cark_sccrk = KAPWR_KEY; sccr = immr->im_clkrst.car_sccr; sccr &= SCCR_MASK; sccr |= CONFIG_SYS_SCCR; immr->im_clkrst.car_sccr = sccr; speed = board_get_cpufreq (); #if ((CONFIG_SYS_PLPRCR & PLPRCR_MF_MSK) != 0) plprcr = CONFIG_SYS_PLPRCR; #else plprcr = immr->im_clkrst.car_plprcr; plprcr &= PLPRCR_MF_MSK; /* isolate MF field */ plprcr |= CONFIG_SYS_PLPRCR; /* reset control bits */ #endif #ifdef CONFIG_SYS_USE_OSCCLK /* See doc/README.MBX ! */ plprcr |= ((speed + get_reffreq() / 2) / refclock - 1) << 20; #endif immr->im_clkrstk.cark_plprcrk = KAPWR_KEY; immr->im_clkrst.car_plprcr = plprcr; /* * preliminary setup of memory controller: * - map Flash, otherwise configuration/status * registers won't be accessible when read * by board_init_f. * - map NVRAM and configuation/status registers. * - map pci registers. * - DON'T map ram yet, this is done in initdram(). */ switch (speed / 1000000) { case 40: memctl->memc_br0 = 0xFE000000 | br0_32 | 1; memctl->memc_or0 = 0xFF800930; memctl->memc_or4 = CONFIG_SYS_NVRAM_OR | 0x920; memctl->memc_br4 = CONFIG_SYS_NVRAM_BASE | 0x401; break; case 50: memctl->memc_br0 = 0xFE000000 | br0_32 | 1; memctl->memc_or0 = 0xFF800940; memctl->memc_or4 = CONFIG_SYS_NVRAM_OR | 0x930; memctl->memc_br4 = CONFIG_SYS_NVRAM_BASE | 0x401; break; default: hang (); break; } #ifdef CONFIG_USE_PCI memctl->memc_or5 = CONFIG_SYS_PCIMEM_OR; memctl->memc_br5 = CONFIG_SYS_PCIMEM_BASE | 0x001; memctl->memc_or6 = CONFIG_SYS_PCIBRIDGE_OR; memctl->memc_br6 = CONFIG_SYS_PCIBRIDGE_BASE | 0x001; #endif /* * FIXME: I do not understand why I have to call this to * initialise the control register here before booting from * the PCMCIA card but if I do not the Linux kernel falls * over in a big heap. If you can answer this question I * would like to know about it. */ board_ether_init(); } void board_serial_init (void) { MBX_CSR1 &= ~(CSR1_COM1EN | CSR1_XCVRDIS); } void board_ether_init (void) { MBX_CSR1 &= ~(CSR1_EAEN | CSR1_ELEN); MBX_CSR1 |= CSR1_ETEN | CSR1_TPEN | CSR1_FDDIS; } static unsigned int board_get_cpufreq (void) { #ifndef CONFIG_8xx_GCLK_FREQ vpd_packet_t *packet; ulong *p; packet = vpd_find_packet (VPD_PID_ICS); p = (ulong *)packet->data; return *p; #else return((unsigned int)CONFIG_8xx_GCLK_FREQ ); #endif /* CONFIG_8xx_GCLK_FREQ */ } #ifdef CONFIG_SYS_USE_OSCCLK static unsigned int get_reffreq (void) { vpd_packet_t *packet; ulong *p; packet = vpd_find_packet (VPD_PID_RCS); p = (ulong *)packet->data; return *p; } #endif static void board_get_enetaddr(uchar *addr) { int i; vpd_packet_t *packet; packet = vpd_find_packet (VPD_PID_EA); for (i = 0; i < 6; i++) addr[i] = packet->data[i]; } int misc_init_r(void) { uchar enetaddr[6]; if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { board_get_enetaddr(enetaddr); eth_setenv_enetaddr("ethaddr", enetaddr); } return 0; } /* * Check Board Identity: */ int checkboard (void) { vpd_packet_t *packet; int i; const char *const fmt = "\n *** Warning: Low Battery Status - %s Battery ***"; puts ("Board: "); packet = vpd_find_packet (VPD_PID_PID); for (i = 0; i < packet->size; i++) { serial_putc (packet->data[i]); } packet = vpd_find_packet (VPD_PID_MT); for (i = 0; i < packet->size; i++) { serial_putc (packet->data[i]); } serial_putc ('('); packet = vpd_find_packet (VPD_PID_FAN); for (i = 0; i < packet->size; i++) { serial_putc (packet->data[i]); } serial_putc (')'); if (!(MBX_CSR2 & SR2_BATGD)) printf (fmt, "On-Board"); if (!(MBX_CSR2 & SR2_NVBATGD)) printf (fmt, "NVRAM"); serial_putc ('\n'); return (0); } /* ------------------------------------------------------------------------- */ static ulong get_ramsize (dimm_t * dimm) { ulong size = 0; if (dimm->fmt == 1 || dimm->fmt == 2 || dimm->fmt == 3 || dimm->fmt == 4) { size = (1 << (dimm->n_row + dimm->n_col)) * dimm->n_banks * ((dimm->data_w_hi << 8 | dimm->data_w_lo) / 8); } return size; } phys_size_t initdram (int board_type) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; unsigned long ram_sz = 0; unsigned long dimm_sz = 0; dimm_t vpd_dimm, vpd_dram; unsigned int speed = board_get_cpufreq () / 1000000; if (vpd_read (0xa2, (uchar *) & vpd_dimm, sizeof (vpd_dimm), 0) > 0) { dimm_sz = get_ramsize (&vpd_dimm); } if (vpd_read (0xa6, (uchar *) & vpd_dram, sizeof (vpd_dram), 0) > 0) { ram_sz = get_ramsize (&vpd_dram); } /* * Only initialize memory controller when running from FLASH. * When running from RAM, don't touch it. */ if ((ulong) initdram & 0xff000000) { ulong dimm_bank; ulong br0_32 = memctl->memc_br0 & 0x400; switch (speed) { case 40: upmconfig (UPMA, (uint *) sdram_table_40, sizeof (sdram_table_40) / sizeof (uint)); memctl->memc_mptpr = 0x0200; memctl->memc_mamr = dimm_sz ? 0x06801000 : 0x13801000; memctl->memc_or7 = 0xff800930; memctl->memc_br7 = 0xfc000000 | (br0_32 ^ br0_32) | 1; break; case 50: upmconfig (UPMA, (uint *) sdram_table_50, sizeof (sdram_table_50) / sizeof (uint)); memctl->memc_mptpr = 0x0200; memctl->memc_mamr = dimm_sz ? 0x08801000 : 0x1880100; memctl->memc_or7 = 0xff800940; memctl->memc_br7 = 0xfc000000 | (br0_32 ^ br0_32) | 1; break; default: hang (); break; } /* now map ram and dimm, largest one first */ dimm_bank = dimm_sz / 2; if (!dimm_sz) { memctl->memc_or1 = ~(ram_sz - 1) | 0x400; memctl->memc_br1 = CONFIG_SYS_SDRAM_BASE | 0x81; memctl->memc_br2 = 0; memctl->memc_br3 = 0; } else if (ram_sz > dimm_bank) { memctl->memc_or1 = ~(ram_sz - 1) | 0x400; memctl->memc_br1 = CONFIG_SYS_SDRAM_BASE | 0x81; memctl->memc_or2 = ~(dimm_bank - 1) | 0x400; memctl->memc_br2 = (CONFIG_SYS_SDRAM_BASE + ram_sz) | 0x81; memctl->memc_or3 = ~(dimm_bank - 1) | 0x400; memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE + ram_sz + dimm_bank) \ | 0x81; } else { memctl->memc_or2 = ~(dimm_bank - 1) | 0x400; memctl->memc_br2 = CONFIG_SYS_SDRAM_BASE | 0x81; memctl->memc_or3 = ~(dimm_bank - 1) | 0x400; memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE + dimm_bank) | 0x81; memctl->memc_or1 = ~(ram_sz - 1) | 0x400; memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE + dimm_sz) | 0x81; } } return ram_sz + dimm_sz; }