/* * (C) Copyright 2006 * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com * * (C) Copyright 2007-2008 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /* define DEBUG for debugging output (obviously ;-)) */ #if 0 #define DEBUG #endif #include <common.h> #include <asm/processor.h> #include <asm/mmu.h> #include <asm/io.h> #include <asm/cache.h> #include <ppc440.h> #include <watchdog.h> /* * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory * region. Right now the cache should still be disabled in U-Boot because of the * EMAC driver, that need it's buffer descriptor to be located in non cached * memory. * * If at some time this restriction doesn't apply anymore, just define * CONFIG_SYS_ENABLE_SDRAM_CACHE in the board config file and this code should setup * everything correctly. */ #ifdef CONFIG_SYS_ENABLE_SDRAM_CACHE #define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */ #else #define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */ #endif /*-----------------------------------------------------------------------------+ * Prototypes *-----------------------------------------------------------------------------*/ extern int denali_wait_for_dlllock(void); extern void denali_core_search_data_eye(void); extern void dcbz_area(u32 start_address, u32 num_bytes); static u32 is_ecc_enabled(void) { u32 val; mfsdram(DDR0_22, val); val &= DDR0_22_CTRL_RAW_MASK; if (val) return 1; else return 0; } void board_add_ram_info(int use_default) { PPC4xx_SYS_INFO board_cfg; u32 val; if (is_ecc_enabled()) puts(" (ECC"); else puts(" (ECC not"); get_sys_info(&board_cfg); printf(" enabled, %ld MHz", (board_cfg.freqPLB * 2) / 1000000); mfsdram(DDR0_03, val); val = DDR0_03_CASLAT_DECODE(val); printf(", CL%d)", val); } #ifdef CONFIG_DDR_ECC static void wait_ddr_idle(void) { /* * Controller idle status cannot be determined for Denali * DDR2 code. Just return here. */ } static void program_ecc(u32 start_address, u32 num_bytes, u32 tlb_word2_i_value) { u32 val; u32 current_addr = start_address; u32 size; int bytes_remaining; sync(); wait_ddr_idle(); /* * Because of 440EPx errata CHIP 11, we don't touch the last 256 * bytes of SDRAM. */ bytes_remaining = num_bytes - CONFIG_SYS_MEM_TOP_HIDE; /* * We have to write the ECC bytes by zeroing and flushing in smaller * steps, since the whole 256MByte takes too long for the external * watchdog. */ while (bytes_remaining > 0) { size = min((64 << 20), bytes_remaining); /* Write zero's to SDRAM */ dcbz_area(current_addr, size); /* Write modified dcache lines back to memory */ clean_dcache_range(current_addr, current_addr + size); current_addr += 64 << 20; bytes_remaining -= 64 << 20; WATCHDOG_RESET(); } sync(); wait_ddr_idle(); /* Clear error status */ mfsdram(DDR0_00, val); mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL); /* Set 'int_mask' parameter to functionnal value */ mfsdram(DDR0_01, val); mtsdram(DDR0_01, ((val &~ DDR0_01_INT_MASK_MASK) | DDR0_01_INT_MASK_ALL_OFF)); sync(); wait_ddr_idle(); } #endif /************************************************************************* * * initdram -- 440EPx's DDR controller is a DENALI Core * ************************************************************************/ phys_size_t initdram (int board_type) { /* CL=4 */ mtsdram(DDR0_02, 0x00000000); mtsdram(DDR0_00, 0x0000190A); mtsdram(DDR0_01, 0x01000000); mtsdram(DDR0_03, 0x02040803); /* A suitable burst length was taken. CAS is right for our board */ mtsdram(DDR0_04, 0x0B030300); mtsdram(DDR0_05, 0x02020308); mtsdram(DDR0_06, 0x0003C812); mtsdram(DDR0_07, 0x00090100); mtsdram(DDR0_08, 0x03c80001); mtsdram(DDR0_09, 0x00011D5F); mtsdram(DDR0_10, 0x00000100); mtsdram(DDR0_11, 0x000CC800); mtsdram(DDR0_12, 0x00000003); mtsdram(DDR0_14, 0x00000000); mtsdram(DDR0_17, 0x1e000000); mtsdram(DDR0_18, 0x1e1e1e1e); mtsdram(DDR0_19, 0x1e1e1e1e); mtsdram(DDR0_20, 0x0B0B0B0B); mtsdram(DDR0_21, 0x0B0B0B0B); #ifdef CONFIG_DDR_ECC mtsdram(DDR0_22, 0x00267F0B | DDR0_22_CTRL_RAW_ECC_ENABLE); /* enable ECC */ #else mtsdram(DDR0_22, 0x00267F0B); #endif mtsdram(DDR0_23, 0x01000000); mtsdram(DDR0_24, 0x01010001); mtsdram(DDR0_26, 0x2D93028A); mtsdram(DDR0_27, 0x0784682B); mtsdram(DDR0_28, 0x00000080); mtsdram(DDR0_31, 0x00000000); mtsdram(DDR0_42, 0x01000008); mtsdram(DDR0_43, 0x050A0200); mtsdram(DDR0_44, 0x00000005); mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */ denali_wait_for_dlllock(); #if defined(CONFIG_DDR_DATA_EYE) /* -----------------------------------------------------------+ * Perform data eye search if requested. * ----------------------------------------------------------*/ program_tlb(0, CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20, TLB_WORD2_I_ENABLE); denali_core_search_data_eye(); remove_tlb(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20); #endif /* * Program tlb entries for this size (dynamic) */ program_tlb(0, CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20, MY_TLB_WORD2_I_ENABLE); /* * Setup 2nd TLB with same physical address but different virtual address * with cache enabled. This is done for fast ECC generation. */ program_tlb(0, CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20, 0); #ifdef CONFIG_DDR_ECC /* * If ECC is enabled, initialize the parity bits. */ program_ecc(CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20, 0); #endif /* * Clear possible errors resulting from data-eye-search. * If not done, then we could get an interrupt later on when * exceptions are enabled. */ set_mcsr(get_mcsr()); return (CONFIG_SYS_MBYTES_SDRAM << 20); }