/*********************************************************************** * M* Modul: lwmon.c M* M* Content: LWMON specific U-Boot commands. * * (C) Copyright 2001, 2002 * DENX Software Engineering * Wolfgang Denk, wd@denx.de * D* Design: wd@denx.de C* Coding: wd@denx.de V* Verification: dzu@denx.de * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA ***********************************************************************/ /*---------------------------- Headerfiles ----------------------------*/ #include <common.h> #include <mpc8xx.h> #include <commproc.h> #include <i2c.h> #include <command.h> #include <malloc.h> #include <post.h> #include <serial.h> #include <linux/types.h> #include <linux/string.h> /* for strdup */ DECLARE_GLOBAL_DATA_PTR; /*------------------------ Local prototypes ---------------------------*/ static long int dram_size (long int, long int *, long int); static void kbd_init (void); static int compare_magic (uchar *kbd_data, uchar *str); /*--------------------- Local macros and constants --------------------*/ #define _NOT_USED_ 0xFFFFFFFF #ifdef CONFIG_MODEM_SUPPORT static int key_pressed(void); extern void disable_putc(void); #endif /* CONFIG_MODEM_SUPPORT */ /* * 66 MHz SDRAM access using UPM A */ const uint sdram_table[] = { #if defined(CONFIG_SYS_MEMORY_75) || defined(CONFIG_SYS_MEMORY_8E) /* * Single Read. (Offset 0 in UPM RAM) */ 0x1F0DFC04, 0xEEAFBC04, 0x11AF7C04, 0xEFBAFC00, 0x1FF5FC47, /* last */ /* * SDRAM Initialization (offset 5 in UPM RAM) * * This is no UPM entry point. The following definition uses * the remaining space to establish an initialization * sequence, which is executed by a RUN command. * */ 0x1FF5FC34, 0xEFEABC34, 0x1FB57C35, /* last */ /* * Burst Read. (Offset 8 in UPM RAM) */ 0x1F0DFC04, 0xEEAFBC04, 0x10AF7C04, 0xF0AFFC00, 0xF0AFFC00, 0xF1AFFC00, 0xEFBAFC00, 0x1FF5FC47, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Single Write. (Offset 18 in UPM RAM) */ 0x1F2DFC04, 0xEEABBC00, 0x01B27C04, 0x1FF5FC47, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Burst Write. (Offset 20 in UPM RAM) */ 0x1F0DFC04, 0xEEABBC00, 0x10A77C00, 0xF0AFFC00, 0xF0AFFC00, 0xE1BAFC04, 0x01FF5FC47, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Refresh (Offset 30 in UPM RAM) */ 0x1FFD7C84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC84, 0xFFFFFC07, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Exception. (Offset 3c in UPM RAM) */ 0x7FFFFC07, /* last */ 0xFFFFFCFF, 0xFFFFFCFF, 0xFFFFFCFF, #endif #ifdef CONFIG_SYS_MEMORY_7E /* * Single Read. (Offset 0 in UPM RAM) */ 0x0E2DBC04, 0x11AF7C04, 0xEFBAFC00, 0x1FF5FC47, /* last */ _NOT_USED_, /* * SDRAM Initialization (offset 5 in UPM RAM) * * This is no UPM entry point. The following definition uses * the remaining space to establish an initialization * sequence, which is executed by a RUN command. * */ 0x1FF5FC34, 0xEFEABC34, 0x1FB57C35, /* last */ /* * Burst Read. (Offset 8 in UPM RAM) */ 0x0E2DBC04, 0x10AF7C04, 0xF0AFFC00, 0xF0AFFC00, 0xF1AFFC00, 0xEFBAFC00, 0x1FF5FC47, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Single Write. (Offset 18 in UPM RAM) */ 0x0E29BC04, 0x01B27C04, 0x1FF5FC47, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Burst Write. (Offset 20 in UPM RAM) */ 0x0E29BC04, 0x10A77C00, 0xF0AFFC00, 0xF0AFFC00, 0xE1BAFC04, 0x1FF5FC47, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Refresh (Offset 30 in UPM RAM) */ 0x1FFD7C84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC84, 0xFFFFFC07, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Exception. (Offset 3c in UPM RAM) */ 0x7FFFFC07, /* last */ 0xFFFFFCFF, 0xFFFFFCFF, 0xFFFFFCFF, #endif }; /* * Check Board Identity: * */ /*********************************************************************** F* Function: int checkboard (void) P*A*Z* * P* Parameters: none P* P* Returnvalue: int - 0 is always returned * Z* Intention: This function is the checkboard() method implementation Z* for the lwmon board. Only a standard message is printed. * D* Design: wd@denx.de C* Coding: wd@denx.de V* Verification: dzu@denx.de ***********************************************************************/ int checkboard (void) { puts ("Board: LICCON Konsole LCD3\n"); return (0); } /*********************************************************************** F* Function: phys_size_t initdram (int board_type) P*A*Z* * P* Parameters: int board_type P* - Usually type of the board - ignored here. P* P* Returnvalue: long int P* - Size of initialized memory * Z* Intention: This function is the initdram() method implementation Z* for the lwmon board. Z* The memory controller is initialized to access the Z* DRAM. * D* Design: wd@denx.de C* Coding: wd@denx.de V* Verification: dzu@denx.de ***********************************************************************/ phys_size_t initdram (int board_type) { volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immr->im_memctl; long int size_b0; long int size8, size9; int i; /* * Configure UPMA for SDRAM */ upmconfig (UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint)); memctl->memc_mptpr = CONFIG_SYS_MPTPR; /* burst length=4, burst type=sequential, CAS latency=2 */ memctl->memc_mar = CONFIG_SYS_MAR; /* * Map controller bank 3 to the SDRAM bank at preliminary address. */ memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM; memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM; /* initialize memory address register */ memctl->memc_mamr = CONFIG_SYS_MAMR_8COL; /* refresh not enabled yet */ /* mode initialization (offset 5) */ udelay (200); /* 0x80006105 */ memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x05); /* run 2 refresh sequence with 4-beat refresh burst (offset 0x30) */ udelay (1); /* 0x80006130 */ memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x30); udelay (1); /* 0x80006130 */ memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x30); udelay (1); /* 0x80006106 */ memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x06); memctl->memc_mamr |= MAMR_PTAE; /* refresh enabled */ udelay (200); /* Need at least 10 DRAM accesses to stabilize */ for (i = 0; i < 10; ++i) { volatile unsigned long *addr = (volatile unsigned long *) SDRAM_BASE3_PRELIM; unsigned long val; val = *(addr + i); *(addr + i) = val; } /* * Check Bank 0 Memory Size for re-configuration * * try 8 column mode */ size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE); udelay (1000); /* * try 9 column mode */ size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE); if (size8 < size9) { /* leave configuration at 9 columns */ size_b0 = size9; memctl->memc_mamr = CONFIG_SYS_MAMR_9COL | MAMR_PTAE; udelay (500); } else { /* back to 8 columns */ size_b0 = size8; memctl->memc_mamr = CONFIG_SYS_MAMR_8COL | MAMR_PTAE; udelay (500); } /* * Final mapping: */ memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) | OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING; memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; udelay (1000); return (size_b0); } /*********************************************************************** F* Function: static long int dram_size (long int mamr_value, F* long int *base, F* long int maxsize) P*A*Z* * P* Parameters: long int mamr_value P* - Value for MAMR for the test P* long int *base P* - Base address for the test P* long int maxsize P* - Maximum size to test for P* P* Returnvalue: long int P* - Size of probed memory * Z* Intention: Check memory range for valid RAM. A simple memory test Z* determines the actually available RAM size between Z* addresses `base' and `base + maxsize'. Some (not all) Z* hardware errors are detected: Z* - short between address lines Z* - short between data lines * D* Design: wd@denx.de C* Coding: wd@denx.de V* Verification: dzu@denx.de ***********************************************************************/ static long int dram_size (long int mamr_value, long int *base, long int maxsize) { volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immr->im_memctl; memctl->memc_mamr = mamr_value; return (get_ram_size(base, maxsize)); } /* ------------------------------------------------------------------------- */ #ifndef PB_ENET_TENA # define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */ #endif /*********************************************************************** F* Function: int board_early_init_f (void) P*A*Z* * P* Parameters: none P* P* Returnvalue: int P* - 0 is always returned. * Z* Intention: This function is the board_early_init_f() method implementation Z* for the lwmon board. Z* Disable Ethernet TENA on Port B. * D* Design: wd@denx.de C* Coding: wd@denx.de V* Verification: dzu@denx.de ***********************************************************************/ int board_early_init_f (void) { volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; /* Disable Ethernet TENA on Port B * Necessary because of pull up in COM3 port. * * This is just a preliminary fix, intended to turn off TENA * as soon as possible to avoid noise on the network. Once * I2C is running we will make sure the interface is * correctly initialized. */ immr->im_cpm.cp_pbpar &= ~PB_ENET_TENA; immr->im_cpm.cp_pbodr &= ~PB_ENET_TENA; immr->im_cpm.cp_pbdat &= ~PB_ENET_TENA; /* set to 0 = disabled */ immr->im_cpm.cp_pbdir |= PB_ENET_TENA; return (0); } /* ------------------------------------------------------------------------- */ /*********************************************************************** F* Function: void reset_phy (void) P*A*Z* * P* Parameters: none P* P* Returnvalue: none * Z* Intention: Reset the PHY. In the lwmon case we do this by the Z* signaling the PIC I/O expander. * D* Design: wd@denx.de C* Coding: wd@denx.de V* Verification: dzu@denx.de ***********************************************************************/ void reset_phy (void) { uchar c; #ifdef DEBUG printf ("### Switch on Ethernet for SCC2 ###\n"); #endif c = pic_read (0x61); #ifdef DEBUG printf ("Old PIC read: reg_61 = 0x%02x\n", c); #endif c |= 0x40; /* disable COM3 */ c &= ~0x80; /* enable Ethernet */ pic_write (0x61, c); #ifdef DEBUG c = pic_read (0x61); printf ("New PIC read: reg_61 = 0x%02x\n", c); #endif udelay (1000); } /*------------------------- Keyboard controller -----------------------*/ /* command codes */ #define KEYBD_CMD_READ_KEYS 0x01 #define KEYBD_CMD_READ_VERSION 0x02 #define KEYBD_CMD_READ_STATUS 0x03 #define KEYBD_CMD_RESET_ERRORS 0x10 /* status codes */ #define KEYBD_STATUS_MASK 0x3F #define KEYBD_STATUS_H_RESET 0x20 #define KEYBD_STATUS_BROWNOUT 0x10 #define KEYBD_STATUS_WD_RESET 0x08 #define KEYBD_STATUS_OVERLOAD 0x04 #define KEYBD_STATUS_ILLEGAL_WR 0x02 #define KEYBD_STATUS_ILLEGAL_RD 0x01 /* Number of bytes returned from Keyboard Controller */ #define KEYBD_VERSIONLEN 2 /* version information */ #define KEYBD_DATALEN 9 /* normal key scan data */ /* maximum number of "magic" key codes that can be assigned */ static uchar kbd_addr = CONFIG_SYS_I2C_KEYBD_ADDR; static uchar *key_match (uchar *); #define KEYBD_SET_DEBUGMODE '#' /* Magic key to enable debug output */ /*********************************************************************** F* Function: int board_postclk_init (void) P*A*Z* * P* Parameters: none P* P* Returnvalue: int P* - 0 is always returned. * Z* Intention: This function is the board_postclk_init() method implementation Z* for the lwmon board. * ***********************************************************************/ int board_postclk_init (void) { kbd_init(); #ifdef CONFIG_MODEM_SUPPORT if (key_pressed()) { disable_putc(); /* modem doesn't understand banner etc */ gd->do_mdm_init = 1; } #endif return (0); } struct serial_device * default_serial_console (void) { return gd->do_mdm_init ? &serial_scc_device : &serial_smc_device; } static void kbd_init (void) { uchar kbd_data[KEYBD_DATALEN]; uchar tmp_data[KEYBD_DATALEN]; uchar val, errcd; int i; i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); gd->kbd_status = 0; /* Forced by PIC. Delays <= 175us loose */ udelay(1000); /* Read initial keyboard error code */ val = KEYBD_CMD_READ_STATUS; i2c_write (kbd_addr, 0, 0, &val, 1); i2c_read (kbd_addr, 0, 0, &errcd, 1); /* clear unused bits */ errcd &= KEYBD_STATUS_MASK; /* clear "irrelevant" bits. Recommended by Martin Rajek, LWN */ errcd &= ~(KEYBD_STATUS_H_RESET|KEYBD_STATUS_BROWNOUT); if (errcd) { gd->kbd_status |= errcd << 8; } /* Reset error code and verify */ val = KEYBD_CMD_RESET_ERRORS; i2c_write (kbd_addr, 0, 0, &val, 1); udelay(1000); /* delay NEEDED by keyboard PIC !!! */ val = KEYBD_CMD_READ_STATUS; i2c_write (kbd_addr, 0, 0, &val, 1); i2c_read (kbd_addr, 0, 0, &val, 1); val &= KEYBD_STATUS_MASK; /* clear unused bits */ if (val) { /* permanent error, report it */ gd->kbd_status |= val; return; } /* * Read current keyboard state. * * After the error reset it may take some time before the * keyboard PIC picks up a valid keyboard scan - the total * scan time is approx. 1.6 ms (information by Martin Rajek, * 28 Sep 2002). We read a couple of times for the keyboard * to stabilize, using a big enough delay. * 10 times should be enough. If the data is still changing, * we use what we get :-( */ memset (tmp_data, 0xFF, KEYBD_DATALEN); /* impossible value */ for (i=0; i<10; ++i) { val = KEYBD_CMD_READ_KEYS; i2c_write (kbd_addr, 0, 0, &val, 1); i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN); if (memcmp(kbd_data, tmp_data, KEYBD_DATALEN) == 0) { /* consistent state, done */ break; } /* remeber last state, delay, and retry */ memcpy (tmp_data, kbd_data, KEYBD_DATALEN); udelay (5000); } } /*********************************************************************** F* Function: int misc_init_r (void) P*A*Z* * P* Parameters: none P* P* Returnvalue: int P* - 0 is always returned, even in the case of a keyboard P* error. * Z* Intention: This function is the misc_init_r() method implementation Z* for the lwmon board. Z* The keyboard controller is initialized and the result Z* of a read copied to the environment variable "keybd". Z* If KEYBD_SET_DEBUGMODE is defined, a check is made for Z* this key, and if found display to the LCD will be enabled. Z* The keys in "keybd" are checked against the magic Z* keycommands defined in the environment. Z* See also key_match(). * D* Design: wd@denx.de C* Coding: wd@denx.de V* Verification: dzu@denx.de ***********************************************************************/ int misc_init_r (void) { uchar kbd_data[KEYBD_DATALEN]; char keybd_env[2 * KEYBD_DATALEN + 1]; uchar kbd_init_status = gd->kbd_status >> 8; uchar kbd_status = gd->kbd_status; uchar val; char *str; int i; if (kbd_init_status) { printf ("KEYBD: Error %02X\n", kbd_init_status); } if (kbd_status) { /* permanent error, report it */ printf ("*** Keyboard error code %02X ***\n", kbd_status); sprintf (keybd_env, "%02X", kbd_status); setenv ("keybd", keybd_env); return 0; } /* * Now we know that we have a working keyboard, so disable * all output to the LCD except when a key press is detected. */ if ((console_assign (stdout, "serial") < 0) || (console_assign (stderr, "serial") < 0)) { printf ("Can't assign serial port as output device\n"); } /* Read Version */ val = KEYBD_CMD_READ_VERSION; i2c_write (kbd_addr, 0, 0, &val, 1); i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_VERSIONLEN); printf ("KEYBD: Version %d.%d\n", kbd_data[0], kbd_data[1]); /* Read current keyboard state */ val = KEYBD_CMD_READ_KEYS; i2c_write (kbd_addr, 0, 0, &val, 1); i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN); for (i = 0; i < KEYBD_DATALEN; ++i) { sprintf (keybd_env + i + i, "%02X", kbd_data[i]); } setenv ("keybd", keybd_env); str = strdup ((char *)key_match (kbd_data)); /* decode keys */ #ifdef KEYBD_SET_DEBUGMODE if (kbd_data[0] == KEYBD_SET_DEBUGMODE) { /* set debug mode */ if ((console_assign (stdout, "lcd") < 0) || (console_assign (stderr, "lcd") < 0)) { printf ("Can't assign LCD display as output device\n"); } } #endif /* KEYBD_SET_DEBUGMODE */ #ifdef CONFIG_PREBOOT /* automatically configure "preboot" command on key match */ setenv ("preboot", str); /* set or delete definition */ #endif /* CONFIG_PREBOOT */ if (str != NULL) { free (str); } return (0); } #ifdef CONFIG_PREBOOT static uchar kbd_magic_prefix[] = "key_magic"; static uchar kbd_command_prefix[] = "key_cmd"; static int compare_magic (uchar *kbd_data, uchar *str) { uchar compare[KEYBD_DATALEN-1]; char *nxt; int i; /* Don't include modifier byte */ memcpy (compare, kbd_data+1, KEYBD_DATALEN-1); for (; str != NULL; str = (*nxt) ? (uchar *)(nxt+1) : (uchar *)nxt) { uchar c; int k; c = (uchar) simple_strtoul ((char *)str, (char **) (&nxt), 16); if (str == (uchar *)nxt) { /* invalid character */ break; } /* * Check if this key matches the input. * Set matches to zero, so they match only once * and we can find duplicates or extra keys */ for (k = 0; k < sizeof(compare); ++k) { if (compare[k] == '\0') /* only non-zero entries */ continue; if (c == compare[k]) { /* found matching key */ compare[k] = '\0'; break; } } if (k == sizeof(compare)) { return -1; /* unmatched key */ } } /* * A full match leaves no keys in the `compare' array, */ for (i = 0; i < sizeof(compare); ++i) { if (compare[i]) { return -1; } } return 0; } /*********************************************************************** F* Function: static uchar *key_match (uchar *kbd_data) P*A*Z* * P* Parameters: uchar *kbd_data P* - The keys to match against our magic definitions P* P* Returnvalue: uchar * P* - != NULL: Pointer to the corresponding command(s) P* NULL: No magic is about to happen * Z* Intention: Check if pressed key(s) match magic sequence, Z* and return the command string associated with that key(s). Z* Z* If no key press was decoded, NULL is returned. Z* Z* Note: the first character of the argument will be Z* overwritten with the "magic charcter code" of the Z* decoded key(s), or '\0'. Z* Z* Note: the string points to static environment data Z* and must be saved before you call any function that Z* modifies the environment. * D* Design: wd@denx.de C* Coding: wd@denx.de V* Verification: dzu@denx.de ***********************************************************************/ static uchar *key_match (uchar *kbd_data) { char magic[sizeof (kbd_magic_prefix) + 1]; uchar *suffix; char *kbd_magic_keys; /* * The following string defines the characters that can pe appended * to "key_magic" to form the names of environment variables that * hold "magic" key codes, i. e. such key codes that can cause * pre-boot actions. If the string is empty (""), then only * "key_magic" is checked (old behaviour); the string "125" causes * checks for "key_magic1", "key_magic2" and "key_magic5", etc. */ if ((kbd_magic_keys = getenv ("magic_keys")) == NULL) kbd_magic_keys = ""; /* loop over all magic keys; * use '\0' suffix in case of empty string */ for (suffix=(uchar *)kbd_magic_keys; *suffix || suffix==(uchar *)kbd_magic_keys; ++suffix) { sprintf (magic, "%s%c", kbd_magic_prefix, *suffix); #if 0 printf ("### Check magic \"%s\"\n", magic); #endif if (compare_magic(kbd_data, (uchar *)getenv(magic)) == 0) { char cmd_name[sizeof (kbd_command_prefix) + 1]; char *cmd; sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix); cmd = getenv (cmd_name); #if 0 printf ("### Set PREBOOT to $(%s): \"%s\"\n", cmd_name, cmd ? cmd : "<<NULL>>"); #endif *kbd_data = *suffix; return ((uchar *)cmd); } } #if 0 printf ("### Delete PREBOOT\n"); #endif *kbd_data = '\0'; return (NULL); } #endif /* CONFIG_PREBOOT */ #ifdef CONFIG_LCD_INFO #include <lcd.h> #include <version.h> #include <timestamp.h> void lcd_show_board_info(void) { char temp[32]; lcd_printf ("%s (%s - %s)\n", U_BOOT_VERSION, U_BOOT_DATE, U_BOOT_TIME); lcd_printf ("(C) 2008 DENX Software Engineering GmbH\n"); lcd_printf (" Wolfgang DENK, wd@denx.de\n"); #ifdef CONFIG_LCD_INFO_BELOW_LOGO lcd_printf ("MPC823 CPU at %s MHz\n", strmhz(temp, gd->cpu_clk)); lcd_printf (" %ld MB RAM, %ld MB Flash\n", gd->ram_size >> 20, gd->bd->bi_flashsize >> 20 ); #else /* leave one blank line */ lcd_printf ("\nMPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash\n", strmhz(temp, gd->cpu_clk), gd->ram_size >> 20, gd->bd->bi_flashsize >> 20 ); #endif /* CONFIG_LCD_INFO_BELOW_LOGO */ } #endif /* CONFIG_LCD_INFO */ /*---------------Board Special Commands: PIC read/write ---------------*/ #if defined(CONFIG_CMD_BSP) /*********************************************************************** F* Function: int do_pic (cmd_tbl_t *cmdtp, int flag, F* int argc, char * const argv[]) P*A*Z* * P* Parameters: cmd_tbl_t *cmdtp P* - Pointer to our command table entry P* int flag P* - If the CMD_FLAG_REPEAT bit is set, then this call is P* a repetition P* int argc P* - Argument count P* char * const argv[] P* - Array of the actual arguments P* P* Returnvalue: int P* - 0 The command was handled successfully P* 1 An error occurred * Z* Intention: Implement the "pic [read|write]" commands. Z* The read subcommand takes one argument, the register, Z* whereas the write command takes two, the register and Z* the new value. * D* Design: wd@denx.de C* Coding: wd@denx.de V* Verification: dzu@denx.de ***********************************************************************/ int do_pic (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { uchar reg, val; switch (argc) { case 3: /* PIC read reg */ if (strcmp (argv[1], "read") != 0) break; reg = simple_strtoul (argv[2], NULL, 16); printf ("PIC read: reg %02x: %02x\n\n", reg, pic_read (reg)); return 0; case 4: /* PIC write reg val */ if (strcmp (argv[1], "write") != 0) break; reg = simple_strtoul (argv[2], NULL, 16); val = simple_strtoul (argv[3], NULL, 16); printf ("PIC write: reg %02x val 0x%02x: %02x => ", reg, val, pic_read (reg)); pic_write (reg, val); printf ("%02x\n\n", pic_read (reg)); return 0; default: break; } return cmd_usage(cmdtp); } U_BOOT_CMD( pic, 4, 1, do_pic, "read and write PIC registers", "read reg - read PIC register `reg'\n" "pic write reg val - write value `val' to PIC register `reg'" ); /*********************************************************************** F* Function: int do_kbd (cmd_tbl_t *cmdtp, int flag, F* int argc, char * const argv[]) P*A*Z* * P* Parameters: cmd_tbl_t *cmdtp P* - Pointer to our command table entry P* int flag P* - If the CMD_FLAG_REPEAT bit is set, then this call is P* a repetition P* int argc P* - Argument count P* char * const argv[] P* - Array of the actual arguments P* P* Returnvalue: int P* - 0 is always returned. * Z* Intention: Implement the "kbd" command. Z* The keyboard status is read. The result is printed on Z* the console and written into the "keybd" environment Z* variable. * D* Design: wd@denx.de C* Coding: wd@denx.de V* Verification: dzu@denx.de ***********************************************************************/ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { uchar kbd_data[KEYBD_DATALEN]; char keybd_env[2 * KEYBD_DATALEN + 1]; uchar val; int i; #if 0 /* Done in kbd_init */ i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); #endif /* Read keys */ val = KEYBD_CMD_READ_KEYS; i2c_write (kbd_addr, 0, 0, &val, 1); i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN); puts ("Keys:"); for (i = 0; i < KEYBD_DATALEN; ++i) { sprintf (keybd_env + i + i, "%02X", kbd_data[i]); printf (" %02x", kbd_data[i]); } putc ('\n'); setenv ("keybd", keybd_env); return 0; } U_BOOT_CMD( kbd, 1, 1, do_kbd, "read keyboard status", "" ); /* Read and set LSB switch */ #define CONFIG_SYS_PC_TXD1_ENA 0x0008 /* PC.12 */ /*********************************************************************** F* Function: int do_lsb (cmd_tbl_t *cmdtp, int flag, F* int argc, char * const argv[]) P*A*Z* * P* Parameters: cmd_tbl_t *cmdtp P* - Pointer to our command table entry P* int flag P* - If the CMD_FLAG_REPEAT bit is set, then this call is P* a repetition P* int argc P* - Argument count P* char * const argv[] P* - Array of the actual arguments P* P* Returnvalue: int P* - 0 The command was handled successfully P* 1 An error occurred * Z* Intention: Implement the "lsb [on|off]" commands. Z* The lsb is switched according to the first parameter by Z* by signaling the PIC I/O expander. Z* Called with no arguments, the current setting is Z* printed. * D* Design: wd@denx.de C* Coding: wd@denx.de V* Verification: dzu@denx.de ***********************************************************************/ int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { uchar val; immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; switch (argc) { case 1: /* lsb - print setting */ val = pic_read (0x60); printf ("LSB is o%s\n", (val & 0x20) ? "n" : "ff"); return 0; case 2: /* lsb on or lsb off - set switch */ val = pic_read (0x60); if (strcmp (argv[1], "on") == 0) { val |= 0x20; immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_TXD1_ENA); immr->im_ioport.iop_pcdat |= CONFIG_SYS_PC_TXD1_ENA; immr->im_ioport.iop_pcdir |= CONFIG_SYS_PC_TXD1_ENA; } else if (strcmp (argv[1], "off") == 0) { val &= ~0x20; immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_TXD1_ENA); immr->im_ioport.iop_pcdat &= ~(CONFIG_SYS_PC_TXD1_ENA); immr->im_ioport.iop_pcdir |= CONFIG_SYS_PC_TXD1_ENA; } else { break; } pic_write (0x60, val); return 0; default: break; } return cmd_usage(cmdtp); } U_BOOT_CMD( lsb, 2, 1, do_lsb, "check and set LSB switch", "on - switch LSB on\n" "lsb off - switch LSB off\n" "lsb - print current setting" ); #endif /*----------------------------- Utilities -----------------------------*/ /*********************************************************************** F* Function: uchar pic_read (uchar reg) P*A*Z* * P* Parameters: uchar reg P* - Register to read P* P* Returnvalue: uchar P* - Value read from register * Z* Intention: Read a register from the PIC I/O expander. * D* Design: wd@denx.de C* Coding: wd@denx.de V* Verification: dzu@denx.de ***********************************************************************/ uchar pic_read (uchar reg) { return (i2c_reg_read (CONFIG_SYS_I2C_PICIO_ADDR, reg)); } /*********************************************************************** F* Function: void pic_write (uchar reg, uchar val) P*A*Z* * P* Parameters: uchar reg P* - Register to read P* uchar val P* - Value to write P* P* Returnvalue: none * Z* Intention: Write to a register on the PIC I/O expander. * D* Design: wd@denx.de C* Coding: wd@denx.de V* Verification: dzu@denx.de ***********************************************************************/ void pic_write (uchar reg, uchar val) { i2c_reg_write (CONFIG_SYS_I2C_PICIO_ADDR, reg, val); } /*---------------------- Board Control Functions ----------------------*/ /*********************************************************************** F* Function: void board_poweroff (void) P*A*Z* * P* Parameters: none P* P* Returnvalue: none * Z* Intention: Turn off the battery power and loop endless, so this Z* should better be the last function you call... * D* Design: wd@denx.de C* Coding: wd@denx.de V* Verification: dzu@denx.de ***********************************************************************/ void board_poweroff (void) { /* Turn battery off */ ((volatile immap_t *)CONFIG_SYS_IMMR)->im_ioport.iop_pcdat &= ~(1 << (31 - 13)); while (1); } #ifdef CONFIG_MODEM_SUPPORT static int key_pressed(void) { uchar kbd_data[KEYBD_DATALEN]; uchar val; /* Read keys */ val = KEYBD_CMD_READ_KEYS; i2c_write (kbd_addr, 0, 0, &val, 1); i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN); return (compare_magic(kbd_data, (uchar *)CONFIG_MODEM_KEY_MAGIC) == 0); } #endif /* CONFIG_MODEM_SUPPORT */ #ifdef CONFIG_POST /* * Returns 1 if keys pressed to start the power-on long-running tests * Called from board_init_f(). */ int post_hotkeys_pressed(void) { uchar kbd_data[KEYBD_DATALEN]; uchar val; /* Read keys */ val = KEYBD_CMD_READ_KEYS; i2c_write (kbd_addr, 0, 0, &val, 1); i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN); return (compare_magic(kbd_data, (uchar *)CONFIG_POST_KEY_MAGIC) == 0); } #endif