/* * (C) Copyright 2002 * Sysgo Real-Time Solutions, GmbH <www.elinos.com> * Marius Groeger <mgroeger@sysgo.de> * * (C) Copyright 2002 * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /* #define DEBUG */ #include <common.h> #include <environment.h> #define FLASH_BANK_SIZE 0x1000000 /* 16MB (2 x 8 MB) */ #define MAIN_SECT_SIZE 0x40000 /* 256KB (2 x 128kB) */ flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; #define CMD_READ_ARRAY 0x00FF00FF #define CMD_IDENTIFY 0x00900090 #define CMD_ERASE_SETUP 0x00200020 #define CMD_ERASE_CONFIRM 0x00D000D0 #define CMD_PROGRAM 0x00400040 #define CMD_RESUME 0x00D000D0 #define CMD_SUSPEND 0x00B000B0 #define CMD_STATUS_READ 0x00700070 #define CMD_STATUS_RESET 0x00500050 #define BIT_BUSY 0x00800080 #define BIT_ERASE_SUSPEND 0x00400040 #define BIT_ERASE_ERROR 0x00200020 #define BIT_PROGRAM_ERROR 0x00100010 #define BIT_VPP_RANGE_ERROR 0x00080008 #define BIT_PROGRAM_SUSPEND 0x00040004 #define BIT_PROTECT_ERROR 0x00020002 #define BIT_UNDEFINED 0x00010001 #define BIT_SEQUENCE_ERROR 0x00300030 #define BIT_TIMEOUT 0x80000000 /*----------------------------------------------------------------------- */ ulong flash_init (void) { int i, j; ulong size = 0; for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { ulong flashbase = 0; flash_info[i].flash_id = (INTEL_MANUFACT & FLASH_VENDMASK) | (INTEL_ID_28F640J3A & FLASH_TYPEMASK); flash_info[i].size = FLASH_BANK_SIZE; flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT); if (i == 0) flashbase = CONFIG_SYS_FLASH_BASE; else panic ("configured too many flash banks!\n"); for (j = 0; j < flash_info[i].sector_count; j++) { flash_info[i].start[j] = flashbase; /* uniform sector size */ flashbase += MAIN_SECT_SIZE; } size += flash_info[i].size; } /* * Protect monitor and environment sectors */ flash_protect ( FLAG_PROTECT_SET, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]); flash_protect ( FLAG_PROTECT_SET, CONFIG_ENV_ADDR, CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, &flash_info[0]); #ifdef CONFIG_ENV_ADDR_REDUND flash_protect ( FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND, CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, &flash_info[0]); #endif return size; } /*----------------------------------------------------------------------- */ void flash_print_info (flash_info_t * info) { int i; switch (info->flash_id & FLASH_VENDMASK) { case (INTEL_MANUFACT & FLASH_VENDMASK): printf ("Intel: "); break; default: printf ("Unknown Vendor "); break; } switch (info->flash_id & FLASH_TYPEMASK) { case (INTEL_ID_28F640J3A & FLASH_TYPEMASK): printf ("2x 28F640J3A (64Mbit)\n"); break; default: printf ("Unknown Chip Type\n"); return; break; } printf (" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count); printf (" Sector Start Addresses:"); for (i = 0; i < info->sector_count; i++) { if ((i % 5) == 0) { printf ("\n "); } printf (" %08lX%s", info->start[i], info->protect[i] ? " (RO)" : " "); } printf ("\n"); } /*----------------------------------------------------------------------- */ int flash_error (ulong code) { /* Check bit patterns */ /* SR.7=0 is busy, SR.7=1 is ready */ /* all other flags indicate error on 1 */ /* SR.0 is undefined */ /* Timeout is our faked flag */ /* sequence is described in Intel 290644-005 document */ /* check Timeout */ if (code & BIT_TIMEOUT) { puts ("Timeout\n"); return ERR_TIMOUT; } /* check Busy, SR.7 */ if (~code & BIT_BUSY) { puts ("Busy\n"); return ERR_PROG_ERROR; } /* check Vpp low, SR.3 */ if (code & BIT_VPP_RANGE_ERROR) { puts ("Vpp range error\n"); return ERR_PROG_ERROR; } /* check Device Protect Error, SR.1 */ if (code & BIT_PROTECT_ERROR) { puts ("Device protect error\n"); return ERR_PROG_ERROR; } /* check Command Seq Error, SR.4 & SR.5 */ if (code & BIT_SEQUENCE_ERROR) { puts ("Command seqence error\n"); return ERR_PROG_ERROR; } /* check Block Erase Error, SR.5 */ if (code & BIT_ERASE_ERROR) { puts ("Block erase error\n"); return ERR_PROG_ERROR; } /* check Program Error, SR.4 */ if (code & BIT_PROGRAM_ERROR) { puts ("Program error\n"); return ERR_PROG_ERROR; } /* check Block Erase Suspended, SR.6 */ if (code & BIT_ERASE_SUSPEND) { puts ("Block erase suspended\n"); return ERR_PROG_ERROR; } /* check Program Suspended, SR.2 */ if (code & BIT_PROGRAM_SUSPEND) { puts ("Program suspended\n"); return ERR_PROG_ERROR; } /* OK, no error */ return ERR_OK; } /*----------------------------------------------------------------------- */ int flash_erase (flash_info_t * info, int s_first, int s_last) { ulong result, result1; int iflag, prot, sect; int rc = ERR_OK; #ifdef USE_920T_MMU int cflag; #endif debug ("flash_erase: s_first %d s_last %d\n", s_first, s_last); /* first look for protection bits */ if (info->flash_id == FLASH_UNKNOWN) return ERR_UNKNOWN_FLASH_TYPE; if ((s_first < 0) || (s_first > s_last)) { return ERR_INVAL; } if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK)) { return ERR_UNKNOWN_FLASH_VENDOR; } prot = 0; for (sect = s_first; sect <= s_last; ++sect) { if (info->protect[sect]) { prot++; } } if (prot) { printf ("- Warning: %d protected sectors will not be erased!\n", prot); } else { printf ("\n"); } /* * Disable interrupts which might cause a timeout * here. Remember that our exception vectors are * at address 0 in the flash, and we don't want a * (ticker) exception to happen while the flash * chip is in programming mode. */ #ifdef USE_920T_MMU cflag = dcache_status (); dcache_disable (); #endif iflag = disable_interrupts (); /* Start erase on unprotected sectors */ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { debug ("Erasing sector %2d @ %08lX... ", sect, info->start[sect]); /* arm simple, non interrupt dependent timer */ reset_timer_masked(); if (info->protect[sect] == 0) { /* not protected */ vu_long *addr = (vu_long *) (info->start[sect]); ulong bsR7, bsR7_2, bsR5, bsR5_2; /* *addr = CMD_STATUS_RESET; */ *addr = CMD_ERASE_SETUP; *addr = CMD_ERASE_CONFIRM; /* wait until flash is ready */ do { /* check timeout */ if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = CMD_STATUS_RESET; result = BIT_TIMEOUT; break; } *addr = CMD_STATUS_READ; result = *addr; bsR7 = result & (1 << 7); bsR7_2 = result & (1 << 23); } while (!bsR7 | !bsR7_2); *addr = CMD_STATUS_READ; result1 = *addr; bsR5 = result1 & (1 << 5); bsR5_2 = result1 & (1 << 21); #ifdef SAMSUNG_FLASH_DEBUG printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2); if (bsR5 != 0 && bsR5_2 != 0) printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2); #endif *addr = CMD_READ_ARRAY; *addr = CMD_RESUME; if ((rc = flash_error (result)) != ERR_OK) goto outahere; #if 0 printf ("ok.\n"); } else { /* it was protected */ printf ("protected!\n"); #endif } } outahere: /* allow flash to settle - wait 10 ms */ udelay_masked (10000); if (iflag) enable_interrupts (); #ifdef USE_920T_MMU if (cflag) dcache_enable (); #endif return rc; } /*----------------------------------------------------------------------- * Copy memory to flash */ static int write_word (flash_info_t * info, ulong dest, ulong data) { vu_long *addr = (vu_long *) dest; ulong result; int rc = ERR_OK; int iflag; #ifdef USE_920T_MMU int cflag; #endif /* * Check if Flash is (sufficiently) erased */ result = *addr; if ((result & data) != data) return ERR_NOT_ERASED; /* * Disable interrupts which might cause a timeout * here. Remember that our exception vectors are * at address 0 in the flash, and we don't want a * (ticker) exception to happen while the flash * chip is in programming mode. */ #ifdef USE_920T_MMU cflag = dcache_status (); dcache_disable (); #endif iflag = disable_interrupts (); /* *addr = CMD_STATUS_RESET; */ *addr = CMD_PROGRAM; *addr = data; /* arm simple, non interrupt dependent timer */ reset_timer_masked (); /* wait until flash is ready */ do { /* check timeout */ if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { *addr = CMD_SUSPEND; result = BIT_TIMEOUT; break; } *addr = CMD_STATUS_READ; result = *addr; } while (~result & BIT_BUSY); /* *addr = CMD_READ_ARRAY; */ *addr = CMD_STATUS_READ; result = *addr; rc = flash_error (result); if (iflag) enable_interrupts (); #ifdef USE_920T_MMU if (cflag) dcache_enable (); #endif *addr = CMD_READ_ARRAY; *addr = CMD_RESUME; return rc; } /*----------------------------------------------------------------------- * Copy memory to flash. */ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) { ulong cp, wp, data; int l; int i, rc; wp = (addr & ~3); /* get lower word aligned address */ /* * handle unaligned start bytes */ if ((l = addr - wp) != 0) { data = 0; for (i = 0, cp = wp; i < l; ++i, ++cp) { data = (data >> 8) | (*(uchar *) cp << 24); } for (; i < 4 && cnt > 0; ++i) { data = (data >> 8) | (*src++ << 24); --cnt; ++cp; } for (; cnt == 0 && i < 4; ++i, ++cp) { data = (data >> 8) | (*(uchar *) cp << 24); } if ((rc = write_word (info, wp, data)) != 0) { return (rc); } wp += 4; } /* * handle word aligned part */ while (cnt >= 4) { data = *((vu_long *) src); if ((rc = write_word (info, wp, data)) != 0) { return (rc); } src += 4; wp += 4; cnt -= 4; } if (cnt == 0) { return ERR_OK; } /* * handle unaligned tail bytes */ data = 0; for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) { data = (data >> 8) | (*src++ << 24); --cnt; } for (; i < 4; ++i, ++cp) { data = (data >> 8) | (*(uchar *) cp << 24); } return write_word (info, wp, data); }