/* * (C) Copyright 2000, 2001 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * (C) Copyright 2001 * Torsten Stevens, FHG IMS, stevens@ims.fhg.de * Bruno Achauer, Exet AG, bruno@exet-ag.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ /* * Derived from ../tqm8xx/tqm8xx.c */ #include <common.h> #include <mpc8xx.h> /* ------------------------------------------------------------------------- */ static long int dram_size (long int, long int *, long int); /* ------------------------------------------------------------------------- */ #define _NOT_USED_ 0xFFFFFFFF const uint sdram_table[] = { /* * Single Read. (Offset 0 in UPMA RAM) */ 0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00, 0x1ff77c47, /* last */ /* * SDRAM Initialization (offset 5 in UPMA RAM) * * This is no UPM entry point. The following definition uses * the remaining space to establish an initialization * sequence, which is executed by a RUN command. * */ 0x1ff77c35, 0xefeabc34, 0x1fb57c35, /* last */ /* * Burst Read. (Offset 8 in UPMA RAM) */ 0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00, 0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Single Write. (Offset 18 in UPMA RAM) */ 0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Burst Write. (Offset 20 in UPMA RAM) */ 0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00, 0xf0affc00, 0xe1bbbc04, 0x1ff77c47, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Refresh (Offset 30 in UPMA RAM) */ 0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc84, 0xfffffc07, 0xfffffc07, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Exception. (Offset 3c in UPMA RAM) */ 0x7ffffc07, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, }; /* ------------------------------------------------------------------------- */ /* * Check Board Identity: * * Test TQ ID string (TQM8xx...) * If present, check for "L" type (no second DRAM bank), * otherwise "L" type is assumed as default. * * Return 1 for "L" type, 0 else. */ int checkboard (void) { printf ("Board: Lantec special edition rev.%d\n", CONFIG_LANTEC); return 0; } /* ------------------------------------------------------------------------- */ phys_size_t initdram (int board_type) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; long int size_b0; int i; /* * Configure UPMA for SDRAM */ upmconfig (UPMA, (uint *) sdram_table, sizeof (sdram_table) / sizeof (uint)); memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_8K /* XXX CONFIG_SYS_MPTPR XXX */ ; /* burst length=4, burst type=sequential, CAS latency=2 */ memctl->memc_mar = 0x00000088; /* * Map controller bank 3 to the SDRAM bank at preliminary address. */ memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM; memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM; /* initialize memory address register */ memctl->memc_mamr = CONFIG_SYS_MAMR_8COL; /* refresh not enabled yet */ /* mode initialization (offset 5) */ udelay (200); /* 0x80006105 */ memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x05); /* run 2 refresh sequence with 4-beat refresh burst (offset 0x30) */ udelay (1); /* 0x80006130 */ memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x30); udelay (1); /* 0x80006130 */ memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x30); udelay (1); /* 0x80006106 */ memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x06); memctl->memc_mamr |= MAMR_PTAE; /* refresh enabled */ udelay (200); /* Need at least 10 DRAM accesses to stabilize */ for (i = 0; i < 10; ++i) { volatile unsigned long *addr = (volatile unsigned long *) SDRAM_BASE3_PRELIM; unsigned long val; val = *(addr + i); *(addr + i) = val; } /* * Check Bank 0 Memory Size for re-configuration */ size_b0 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE); memctl->memc_mamr = CONFIG_SYS_MAMR_8COL | MAMR_PTAE; /* * Final mapping: */ memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; udelay (1000); return (size_b0); } /* ------------------------------------------------------------------------- */ /* * Check memory range for valid RAM. A simple memory test determines * the actually available RAM size between addresses `base' and * `base + maxsize'. Some (not all) hardware errors are detected: * - short between address lines * - short between data lines */ static long int dram_size (long int mamr_value, long int *base, long int maxsize) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; memctl->memc_mamr = mamr_value; return (get_ram_size (base, maxsize)); }