/* * (C) Copyright 2007-2008 * Larry Johnson, lrj@acm.org * * (C) Copyright 2006-2007 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * (C) Copyright 2006 * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include <common.h> #include <fdt_support.h> #include <i2c.h> #include <libfdt.h> #include <ppc440.h> #include <asm/bitops.h> #include <asm/gpio.h> #include <asm/io.h> #include <asm/ppc4xx-uic.h> #include <asm/processor.h> DECLARE_GLOBAL_DATA_PTR; extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ ulong flash_get_size(ulong base, int banknum); #if defined(CONFIG_KORAT_PERMANENT) void korat_buzzer(int const on) { if (on) { out_8((u8 *) CFG_CPLD_BASE + 0x05, in_8((u8 *) CFG_CPLD_BASE + 0x05) | 0x80); } else { out_8((u8 *) CFG_CPLD_BASE + 0x05, in_8((u8 *) CFG_CPLD_BASE + 0x05) & ~0x80); } } #endif int board_early_init_f(void) { uint32_t sdr0_pfc1, sdr0_pfc2; uint32_t reg; int eth; #if defined(CONFIG_KORAT_PERMANENT) unsigned mscount; extern void korat_branch_absolute(uint32_t addr); for (mscount = 0; mscount < CFG_KORAT_MAN_RESET_MS; ++mscount) { udelay(1000); if (gpio_read_in_bit(CFG_GPIO_RESET_PRESSED_)) { /* This call does not return. */ korat_branch_absolute( CFG_FLASH1_TOP - 2 * CFG_ENV_SECT_SIZE - 4); } } korat_buzzer(1); while (!gpio_read_in_bit(CFG_GPIO_RESET_PRESSED_)) udelay(1000); korat_buzzer(0); #endif mtdcr(ebccfga, xbcfg); mtdcr(ebccfgd, 0xb8400000); /* * Setup the interrupt controller polarities, triggers, etc. */ mtdcr(uic0sr, 0xffffffff); /* clear all */ mtdcr(uic0er, 0x00000000); /* disable all */ mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */ mtdcr(uic0pr, 0xfffff7ff); /* per ref-board manual */ mtdcr(uic0tr, 0x00000000); /* per ref-board manual */ mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */ mtdcr(uic0sr, 0xffffffff); /* clear all */ mtdcr(uic1sr, 0xffffffff); /* clear all */ mtdcr(uic1er, 0x00000000); /* disable all */ mtdcr(uic1cr, 0x00000000); /* all non-critical */ mtdcr(uic1pr, 0xffffffff); /* per ref-board manual */ mtdcr(uic1tr, 0x00000000); /* per ref-board manual */ mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */ mtdcr(uic1sr, 0xffffffff); /* clear all */ mtdcr(uic2sr, 0xffffffff); /* clear all */ mtdcr(uic2er, 0x00000000); /* disable all */ mtdcr(uic2cr, 0x00000000); /* all non-critical */ mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */ mtdcr(uic2tr, 0x00000000); /* per ref-board manual */ mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */ mtdcr(uic2sr, 0xffffffff); /* clear all */ /* * Take sim card reader and CF controller out of reset. Also enable PHY * auto-detect until board-specific PHY resets are available. */ out_8((u8 *) CFG_CPLD_BASE + 0x02, 0xC0); /* Configure the two Ethernet PHYs. For each PHY, configure for fiber * if the SFP module is present, and for copper if it is not present. */ for (eth = 0; eth < 2; ++eth) { if (gpio_read_in_bit(CFG_GPIO_SFP0_PRESENT_ + eth)) { /* SFP module not present: configure PHY for copper. */ /* Set PHY to autonegotate 10 MB, 100MB, or 1 GB */ out_8((u8 *) CFG_CPLD_BASE + 0x03, in_8((u8 *) CFG_CPLD_BASE + 0x03) | 0x06 << (4 * eth)); } else { /* SFP module present: configure PHY for fiber and enable output */ gpio_write_bit(CFG_GPIO_PHY0_FIBER_SEL + eth, 1); gpio_write_bit(CFG_GPIO_SFP0_TX_EN_ + eth, 0); } } /* enable Ethernet: set GPIO45 and GPIO46 to 1 */ gpio_write_bit(CFG_GPIO_PHY0_EN, 1); gpio_write_bit(CFG_GPIO_PHY1_EN, 1); /* Wait 1 ms, then enable Fiber signal detect to PHYs. */ udelay(1000); out_8((u8 *) CFG_CPLD_BASE + 0x03, in_8((u8 *) CFG_CPLD_BASE + 0x03) | 0x88); /* select Ethernet (and optionally IIC1) pins */ mfsdr(SDR0_PFC1, sdr0_pfc1); sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | SDR0_PFC1_SELECT_CONFIG_4; #ifdef CONFIG_I2C_MULTI_BUS sdr0_pfc1 |= ((sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL); #endif mfsdr(SDR0_PFC2, sdr0_pfc2); sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | SDR0_PFC2_SELECT_CONFIG_4; mtsdr(SDR0_PFC2, sdr0_pfc2); mtsdr(SDR0_PFC1, sdr0_pfc1); /* PCI arbiter enabled */ mfsdr(sdr_pci0, reg); mtsdr(sdr_pci0, 0x80000000 | reg); return 0; } /* * The boot flash on CS0 normally has its write-enable pin disabled, and so will * not respond to CFI commands. This routine therefore fills in the flash * information for the boot flash. (The flash at CS1 operates normally.) */ ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info) { uint32_t addr; int i; if (1 != banknum) return 0; info->size = CFG_FLASH0_SIZE; info->sector_count = CFG_FLASH0_SIZE / 0x20000; info->flash_id = 0x01000000; info->portwidth = 2; info->chipwidth = 2; info->buffer_size = 32; info->erase_blk_tout = 16384; info->write_tout = 2; info->buffer_write_tout = 5; info->vendor = 2; info->cmd_reset = 0x00F0; info->interface = 2; info->legacy_unlock = 0; info->manufacturer_id = 1; info->device_id = 0x007E; #if CFG_FLASH0_SIZE == 0x01000000 info->device_id2 = 0x2101; #elif CFG_FLASH0_SIZE == 0x04000000 info->device_id2 = 0x2301; #else #error Unable to set device_id2 for current CFG_FLASH0_SIZE #endif info->ext_addr = 0x0040; info->cfi_version = 0x3133; info->cfi_offset = 0x0055; info->addr_unlock1 = 0x00000555; info->addr_unlock2 = 0x000002AA; info->name = "CFI conformant"; for (i = 0, addr = -info->size; i < info->sector_count; ++i, addr += 0x20000) { info->start[i] = addr; info->protect[i] = 0x00; } return 1; } static int man_data_read(unsigned int addr) { /* * Read an octet of data from address "addr" in the manufacturer's * information serial EEPROM, or -1 on error. */ u8 data[2]; if (0 != i2c_probe(MAN_DATA_EEPROM_ADDR) || 0 != i2c_read(MAN_DATA_EEPROM_ADDR, addr, 1, data, 1)) { debug("man_data_read(0x%02X) failed\n", addr); return -1; } debug("man_info_read(0x%02X) returned 0x%02X\n", addr, data[0]); return data[0]; } static unsigned int man_data_field_addr(unsigned int const field) { /* * The manufacturer's information serial EEPROM contains a sequence of * zero-delimited fields. Return the starting address of field "field", * or 0 on error. */ unsigned addr, i; if (0 == field || 'A' != man_data_read(0) || '\0' != man_data_read(1)) /* Only format "A" is currently supported */ return 0; for (addr = 2, i = 1; i < field && addr < 256; ++addr) { if ('\0' == man_data_read(addr)) ++i; } return (addr < 256) ? addr : 0; } static char *man_data_read_field(char s[], unsigned const field, unsigned const length) { /* * Place the null-terminated contents of field "field" of length * "length" from the manufacturer's information serial EEPROM into * string "s[length + 1]" and return a pointer to s, or return 0 on * error. In either case the original contents of s[] is not preserved. */ unsigned addr, i; addr = man_data_field_addr(field); if (0 == addr || addr + length >= 255) return 0; for (i = 0; i < length; ++i) { int const c = man_data_read(addr++); if (c <= 0) return 0; s[i] = (char)c; } if (0 != man_data_read(addr)) return 0; s[i] = '\0'; return s; } static void set_serial_number(void) { /* * If the environmental variable "serial#" is not set, try to set it * from the manufacturer's information serial EEPROM. */ char s[MAN_INFO_LENGTH + MAN_MAC_ADDR_LENGTH + 2]; if (getenv("serial#")) return; if (!man_data_read_field(s, MAN_INFO_FIELD, MAN_INFO_LENGTH)) return; s[MAN_INFO_LENGTH] = '-'; if (!man_data_read_field(s + MAN_INFO_LENGTH + 1, MAN_MAC_ADDR_FIELD, MAN_MAC_ADDR_LENGTH)) return; setenv("serial#", s); } static void set_mac_addresses(void) { /* * If the environmental variables "ethaddr" and/or "eth1addr" are not * set, try to set them from the manufacturer's information serial * EEPROM. */ #if MAN_MAC_ADDR_LENGTH % 2 != 0 #error MAN_MAC_ADDR_LENGTH must be an even number #endif char s[(3 * MAN_MAC_ADDR_LENGTH) / 2]; char *src; char *dst; if (0 != getenv("ethaddr") && 0 != getenv("eth1addr")) return; if (0 == man_data_read_field(s + (MAN_MAC_ADDR_LENGTH / 2) - 1, MAN_MAC_ADDR_FIELD, MAN_MAC_ADDR_LENGTH)) return; for (src = s + (MAN_MAC_ADDR_LENGTH / 2) - 1, dst = s; src != dst;) { *dst++ = *src++; *dst++ = *src++; *dst++ = ':'; } if (0 == getenv("ethaddr")) setenv("ethaddr", s); if (0 == getenv("eth1addr")) { ++s[((3 * MAN_MAC_ADDR_LENGTH) / 2) - 2]; setenv("eth1addr", s); } } int misc_init_r(void) { uint32_t pbcr; int size_val; uint32_t reg; unsigned long usb2d0cr = 0; unsigned long usb2phy0cr, usb2h0cr = 0; unsigned long sdr0_pfc1; uint32_t const flash1_size = gd->bd->bi_flashsize - CFG_FLASH0_SIZE; char const *const act = getenv("usbact"); /* * Re-do FLASH1 sizing and adjust flash start and offset. */ gd->bd->bi_flashstart = CFG_FLASH1_TOP - flash1_size; gd->bd->bi_flashoffset = 0; mtdcr(ebccfga, pb1cr); pbcr = mfdcr(ebccfgd); size_val = ffs(flash1_size) - 21; pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); mtdcr(ebccfga, pb1cr); mtdcr(ebccfgd, pbcr); /* * Re-check to get correct base address */ flash_get_size(gd->bd->bi_flashstart, 0); /* * Re-do FLASH1 sizing and adjust flash offset to reserve space for * environment */ gd->bd->bi_flashoffset = CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - CFG_FLASH1_ADDR; mtdcr(ebccfga, pb1cr); pbcr = mfdcr(ebccfgd); size_val = ffs(gd->bd->bi_flashsize - CFG_FLASH0_SIZE) - 21; pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); mtdcr(ebccfga, pb1cr); mtdcr(ebccfgd, pbcr); /* Monitor protection ON by default */ #if defined(CONFIG_KORAT_PERMANENT) (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE, CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1, flash_info + 1); #else (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE, CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1, flash_info); #endif /* Env protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR, CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1, flash_info); (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND, CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1, flash_info); /* * USB suff... */ if (act == NULL || strcmp(act, "hostdev") == 0) { /* SDR Setting */ mfsdr(SDR0_PFC1, sdr0_pfc1); mfsdr(SDR0_USB2D0CR, usb2d0cr); mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); mfsdr(SDR0_USB2H0CR, usb2h0cr); usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /* * An 8-bit/60MHz interface is the only possible alternative * when connecting the Device to the PHY */ usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK; usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /* * To enable the USB 2.0 Device function * through the UTMI interface */ usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK; usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION; sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK; sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL; mtsdr(SDR0_PFC1, sdr0_pfc1); mtsdr(SDR0_USB2D0CR, usb2d0cr); mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); mtsdr(SDR0_USB2H0CR, usb2h0cr); /* clear resets */ udelay(1000); mtsdr(SDR0_SRST1, 0x00000000); udelay(1000); mtsdr(SDR0_SRST0, 0x00000000); printf("USB: Host(int phy) Device(ext phy)\n"); } else if (strcmp(act, "dev") == 0) { /*-------------------PATCH-------------------------------*/ mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); udelay(1000); mtsdr(SDR0_SRST1, 0x672c6000); udelay(1000); mtsdr(SDR0_SRST0, 0x00000080); udelay(1000); mtsdr(SDR0_SRST1, 0x60206000); *(unsigned int *)(0xe0000350) = 0x00000001; udelay(1000); mtsdr(SDR0_SRST1, 0x60306000); /*-------------------PATCH-------------------------------*/ /* SDR Setting */ mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); mfsdr(SDR0_USB2H0CR, usb2h0cr); mfsdr(SDR0_USB2D0CR, usb2d0cr); mfsdr(SDR0_PFC1, sdr0_pfc1); usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV; usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK; usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ; usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK; usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION; sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK; sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL; mtsdr(SDR0_USB2H0CR, usb2h0cr); mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); mtsdr(SDR0_USB2D0CR, usb2d0cr); mtsdr(SDR0_PFC1, sdr0_pfc1); /* clear resets */ udelay(1000); mtsdr(SDR0_SRST1, 0x00000000); udelay(1000); mtsdr(SDR0_SRST0, 0x00000000); printf("USB: Device(int phy)\n"); } mfsdr(SDR0_SRST1, reg); /* enable security/kasumi engines */ reg &= ~(SDR0_SRST1_CRYP0 | SDR0_SRST1_KASU0); mtsdr(SDR0_SRST1, reg); /* * Clear PLB4A0_ACR[WRP] * This fix will make the MAL burst disabling patch for the Linux * EMAC driver obsolete. */ reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP; mtdcr(plb4_acr, reg); set_serial_number(); set_mac_addresses(); gpio_write_bit(CFG_GPIO_ATMEGA_RESET_, 1); return 0; } int checkboard(void) { char const *const s = getenv("serial#"); u8 const rev = in_8((u8 *) CFG_CPLD_BASE + 0); printf("Board: Korat, Rev. %X", rev); if (s) printf(", serial# %s", s); printf(".\n Ethernet PHY 0: "); if (gpio_read_out_bit(CFG_GPIO_PHY0_FIBER_SEL)) printf("fiber"); else printf("copper"); printf(", PHY 1: "); if (gpio_read_out_bit(CFG_GPIO_PHY1_FIBER_SEL)) printf("fiber"); else printf("copper"); printf(".\n"); #if defined(CONFIG_KORAT_PERMANENT) printf(" Executing permanent copy of U-Boot.\n"); #endif return 0; } #if defined(CONFIG_PCI) && defined(CONFIG_PCI_PNP) /* * Assign interrupts to PCI devices. */ void korat_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) { pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, VECNUM_EIRQ2); } #endif /* * pci_pre_init * * This routine is called just prior to registering the hose and gives * the board the opportunity to check things. Returning a value of zero * indicates that things are bad & PCI initialization should be aborted. * * Different boards may wish to customize the pci controller structure * (add regions, override default access routines, etc) or perform * certain pre-initialization actions. */ #if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller *hose) { unsigned long addr; /* * Set priority for all PLB3 devices to 0. * Set PLB3 arbiter to fair mode. */ mfsdr(sdr_amp1, addr); mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00); addr = mfdcr(plb3_acr); mtdcr(plb3_acr, addr | 0x80000000); /* * Set priority for all PLB4 devices to 0. */ mfsdr(sdr_amp0, addr); mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00); addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */ mtdcr(plb4_acr, addr); /* * Set Nebula PLB4 arbiter to fair mode. */ /* Segment0 */ addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair; addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled; addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep; addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep; mtdcr(plb0_acr, addr); /* Segment1 */ addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair; addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled; addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep; addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep; mtdcr(plb1_acr, addr); #if defined(CONFIG_PCI_PNP) hose->fixup_irq = korat_pci_fixup_irq; #endif return 1; } #endif /* defined(CONFIG_PCI) */ /* * pci_target_init * * The bootstrap configuration provides default settings for the pci * inbound map (PIM). But the bootstrap config choices are limited and * may not be sufficient for a given board. */ #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller *hose) { /* * Set up Direct MMIO registers */ /* * PowerPC440EPX PCI Master configuration. * Map one 1Gig range of PLB/processor addresses to PCI memory space. * PLB address 0x80000000-0xBFFFFFFF * ==> PCI address 0x80000000-0xBFFFFFFF * Use byte reversed out routines to handle endianess. * Make this region non-prefetchable. */ out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */ /* - disabled b4 setting */ out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */ out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */ out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, */ /* and enable region */ out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute */ /* - disabled b4 setting */ out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE + 0x20000000); /* PMM0 Local Address */ out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE + 0x20000000); /* PMM0 PCI Low Address */ out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, */ /* and enable region */ out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */ out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */ out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */ /* * Set up Configuration registers */ /* Program the board's subsystem id/vendor id */ pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, CFG_PCI_SUBSYS_VENDORID); pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID); /* Configure command register as bus master */ pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); /* 240nS PCI clock */ pci_write_config_word(0, PCI_LATENCY_TIMER, 1); /* No error reporting */ pci_write_config_word(0, PCI_ERREN, 0); pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); /* * Set up Configuration registers for on-board NEC uPD720101 USB * controller. */ pci_write_config_dword(PCI_BDF(0x0, 0xC, 0x0), 0xE4, 0x00000020); } #endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ #if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) void pci_master_init(struct pci_controller *hose) { unsigned short temp_short; /* * Write the PowerPC440 EP PCI Configuration regs. * Enable PowerPC440 EP to be a master on the PCI bus (PMM). * Enable PowerPC440 EP to act as a PCI memory target (PTM). */ pci_read_config_word(0, PCI_COMMAND, &temp_short); pci_write_config_word(0, PCI_COMMAND, temp_short | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); } #endif /* * is_pci_host * * This routine is called to determine if a pci scan should be * performed. With various hardware environments (especially cPCI and * PPMC) it's insufficient to depend on the state of the arbiter enable * bit in the strap register, or generic host/adapter assumptions. * * Rather than hard-code a bad assumption in the general 440 code, the * 440 pci code requires the board to decide at runtime. * * Return 0 for adapter mode, non-zero for host (monarch) mode. */ #if defined(CONFIG_PCI) int is_pci_host(struct pci_controller *hose) { /* Korat is always configured as host. */ return (1); } #endif /* defined(CONFIG_PCI) */ #if defined(CONFIG_POST) /* * Returns 1 if keys pressed to start the power-on long-running tests * Called from board_init_f(). */ int post_hotkeys_pressed(void) { return 0; /* No hotkeys supported */ } #endif /* CONFIG_POST */ #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { u32 val[4]; int rc; ft_cpu_setup(blob, bd); /* Fixup NOR mapping */ val[0] = 1; /* chip select number */ val[1] = 0; /* always 0 */ val[2] = gd->bd->bi_flashstart; val[3] = gd->bd->bi_flashsize - CFG_FLASH0_SIZE; rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", val, sizeof(val), 1); if (rc) printf("Unable to update property NOR mapping, err=%s\n", fdt_strerror(rc)); } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */