/*------------------------------------------------------------------------+ */ /* */ /* This source code has been made available to you by IBM on an AS-IS */ /* basis. Anyone receiving this source is licensed under IBM */ /* copyrights to use it in any way he or she deems fit, including */ /* copying it, modifying it, compiling it, and redistributing it either */ /* with or without modifications. No license under IBM patents or */ /* patent applications is to be implied by the copyright license. */ /* */ /* Any user of this software should understand that IBM cannot provide */ /* technical support for this software and will not be responsible for */ /* any consequences resulting from the use of this software. */ /* */ /* Any person who transfers this source code or any derivative work */ /* must include the IBM copyright notice, this paragraph, and the */ /* preceding two paragraphs in the transferred software. */ /* */ /* COPYRIGHT I B M CORPORATION 1995 */ /* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */ /*------------------------------------------------------------------------- */ /*------------------------------------------------------------------------- */ /* Function: ext_bus_cntlr_init */ /* Description: Initializes the External Bus Controller for the external */ /* peripherals. IMPORTANT: For pass1 this code must run from */ /* cache since you can not reliably change a peripheral banks */ /* timing register (pbxap) while running code from that bank. */ /* For ex., since we are running from ROM on bank 0, we can NOT */ /* execute the code that modifies bank 0 timings from ROM, so */ /* we run it from cache. */ /* */ /* */ /* The layout for the PEI JSE board: */ /* Bank 0 - Flash and SRAM */ /* Bank 1 - SystemACE */ /* Bank 2 - not used */ /* Bank 3 - not used */ /* Bank 4 - not used */ /* Bank 5 - not used */ /* Bank 6 - not used */ /* Bank 7 - not used */ /*------------------------------------------------------------------------- */ #include <ppc4xx.h> #include <ppc_asm.tmpl> #include <ppc_defs.h> #include <asm/cache.h> #include <asm/mmu.h> #define cpc0_cr0 0xB1 .globl ext_bus_cntlr_init ext_bus_cntlr_init: mflr r4 /* save link register */ bl ..getAddr ..getAddr: mflr r3 /* get address of ..getAddr */ mtlr r4 /* restore link register */ addi r4,0,14 /* set ctr to 10; used to prefetch */ mtctr r4 /* 10 cache lines to fit this function */ /* in cache (gives us 8x10=80 instrctns) */ ..ebcloop: icbt r0,r3 /* prefetch cache line for addr in r3 */ addi r3,r3,32 /* move to next cache line */ bdnz ..ebcloop /* continue for 10 cache lines */ /*----------------------------------------------------------------- */ /* Delay to ensure all accesses to ROM are complete before changing */ /* bank 0 timings. 200usec should be enough. */ /* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */ /*----------------------------------------------------------------- */ addis r3,0,0x0 ori r3,r3,0xA000 /* ensure 200usec have passed since reset */ mtctr r3 ..spinlp: bdnz ..spinlp /* spin loop */ /*----------------------------------------------------------------- */ /* Memory Bank 0 (Flash) initialization */ /*----------------------------------------------------------------- */ addi r4,0,pb0ap mtdcr ebccfga,r4 addis r4,0,0x9B01 ori r4,r4,0x5480 mtdcr ebccfgd,r4 addi r4,0,pb0cr mtdcr ebccfga,r4 addis r4,0,0xFFF1 /* BAS=0xFFF,BS=0x0(1MB),BU=0x3(R/W), */ ori r4,r4,0x8000 /* BW=0x0( 8 bits) */ mtdcr ebccfgd,r4 blr /*----------------------------------------------------------------------- */ /* Function: sdram_init */ /* Description: This function is called by cpu/ppc4xx/start.S code */ /* to get the SDRAM initialized. */ /*----------------------------------------------------------------------- */ .globl sdram_init sdram_init: blr