/* * Copyright (C) 2014 Freescale Semiconductor, Inc. * * SPDX-License-Identifier: GPL-2.0+ */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_SYS_I2C_MXC #include #include #endif #ifdef CONFIG_MXC_RDC #include #include #endif #ifdef CONFIG_VIDEO_MXS #include #include #endif #ifdef CONFIG_FASTBOOT #include #ifdef CONFIG_ANDROID_RECOVERY #include #endif #endif /*CONFIG_FASTBOOT*/ DECLARE_GLOBAL_DATA_PTR; #define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) #define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) #define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \ PAD_CTL_SPEED_HIGH | \ PAD_CTL_DSE_48ohm | PAD_CTL_SRE_FAST) #define ENET_CLK_PAD_CTRL (PAD_CTL_SPEED_MED | \ PAD_CTL_DSE_120ohm | PAD_CTL_SRE_FAST) #define ENET_RX_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ PAD_CTL_SPEED_HIGH | PAD_CTL_SRE_FAST) #define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ PAD_CTL_ODE) #define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \ PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm) #define BUTTON_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ PAD_CTL_PUS_22K_UP | PAD_CTL_DSE_40ohm) #ifdef CONFIG_SYS_I2C_MXC #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) /* I2C1 for PMIC */ struct i2c_pads_info i2c_pad_info1 = { .scl = { .i2c_mode = MX6SX_PAD_GPIO1_IO00__I2C1_SCL | PC, .gpio_mode = MX6SX_PAD_GPIO1_IO00__GPIO1_IO_0 | PC, .gp = IMX_GPIO_NR(1, 0), }, .sda = { .i2c_mode = MX6SX_PAD_GPIO1_IO01__I2C1_SDA | PC, .gpio_mode = MX6SX_PAD_GPIO1_IO01__GPIO1_IO_1 | PC, .gp = IMX_GPIO_NR(1, 1), }, }; /* I2C2 */ struct i2c_pads_info i2c_pad_info2 = { .scl = { .i2c_mode = MX6SX_PAD_GPIO1_IO02__I2C2_SCL | PC, .gpio_mode = MX6SX_PAD_GPIO1_IO02__GPIO1_IO_2 | PC, .gp = IMX_GPIO_NR(1, 2), }, .sda = { .i2c_mode = MX6SX_PAD_GPIO1_IO03__I2C2_SDA | PC, .gpio_mode = MX6SX_PAD_GPIO1_IO03__GPIO1_IO_3 | PC, .gp = IMX_GPIO_NR(1, 3), }, }; #endif int dram_init(void) { gd->ram_size = PHYS_SDRAM_SIZE; return 0; } static iomux_v3_cfg_t const uart1_pads[] = { MX6SX_PAD_GPIO1_IO04__UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL), MX6SX_PAD_GPIO1_IO05__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL), }; static iomux_v3_cfg_t const usdhc2_pads[] = { MX6SX_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), }; static iomux_v3_cfg_t const usdhc3_pads[] = { MX6SX_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* CD pin */ MX6SX_PAD_KEY_COL0__GPIO2_IO_10 | MUX_PAD_CTRL(NO_PAD_CTRL), /* RST_B, used for power reset cycle */ MX6SX_PAD_KEY_COL1__GPIO2_IO_11 | MUX_PAD_CTRL(NO_PAD_CTRL), }; static iomux_v3_cfg_t const usdhc4_pads[] = { MX6SX_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), /* CD pin */ MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 | MUX_PAD_CTRL(NO_PAD_CTRL), }; static iomux_v3_cfg_t const usdhc4_emmc_pads[] = { MX6SX_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B | MUX_PAD_CTRL(NO_PAD_CTRL), }; static iomux_v3_cfg_t const peri_3v3_pads[] = { MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 | MUX_PAD_CTRL(NO_PAD_CTRL), }; #ifdef CONFIG_FEC_MXC static iomux_v3_cfg_t const fec1_pads[] = { MX6SX_PAD_ENET1_MDC__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6SX_PAD_ENET1_MDIO__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), }; static iomux_v3_cfg_t const fec2_pads[] = { MX6SX_PAD_ENET1_MDC__ENET2_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6SX_PAD_ENET1_MDIO__ENET2_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), }; static iomux_v3_cfg_t const phy_control_pads[] = { /* Phy 25M Clock */ MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL), /* ENET PHY Power */ MX6SX_PAD_ENET2_COL__GPIO2_IO_6 | MUX_PAD_CTRL(NO_PAD_CTRL), /* AR8031 PHY Reset. */ MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 | MUX_PAD_CTRL(NO_PAD_CTRL), }; static void setup_iomux_fec(int fec_id) { if (0 == fec_id) imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads)); else imx_iomux_v3_setup_multiple_pads(fec2_pads, ARRAY_SIZE(fec2_pads)); } #endif static void setup_iomux_uart(void) { imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); } #ifdef CONFIG_QSPI #define QSPI_PAD_CTRL1 \ (PAD_CTL_SRE_FAST | PAD_CTL_SPEED_HIGH | \ PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_40ohm) static iomux_v3_cfg_t const quadspi_pads[] = { MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B | MUX_PAD_CTRL(QSPI_PAD_CTRL1), MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK | MUX_PAD_CTRL(QSPI_PAD_CTRL1), MX6SX_PAD_NAND_DATA07__QSPI2_A_DQS | MUX_PAD_CTRL(QSPI_PAD_CTRL1), MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 | MUX_PAD_CTRL(QSPI_PAD_CTRL1), MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B | MUX_PAD_CTRL(QSPI_PAD_CTRL1), MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK | MUX_PAD_CTRL(QSPI_PAD_CTRL1), MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS | MUX_PAD_CTRL(QSPI_PAD_CTRL1), }; int board_qspi_init(void) { /* Set the iomux */ imx_iomux_v3_setup_multiple_pads(quadspi_pads, ARRAY_SIZE(quadspi_pads)); /* Set the clock */ enable_qspi_clk(1); return 0; } #endif #ifdef CONFIG_FSL_ESDHC static struct fsl_esdhc_cfg usdhc_cfg[3] = { {USDHC2_BASE_ADDR, 0, 4}, {USDHC3_BASE_ADDR}, #ifdef CONFIG_MX6SXSABRESD_EMMC_REWORK {USDHC4_BASE_ADDR, 0, 8}, #else {USDHC4_BASE_ADDR, 0, 4}, #endif }; #define USDHC3_CD_GPIO IMX_GPIO_NR(2, 10) #define USDHC3_PWR_GPIO IMX_GPIO_NR(2, 11) #define USDHC4_CD_GPIO IMX_GPIO_NR(6, 21) int mmc_get_env_devno(void) { u32 soc_sbmr = readl(SRC_BASE_ADDR + 0x4); int dev_no; /* BOOT_CFG2[3] and BOOT_CFG2[4] */ dev_no = (soc_sbmr & 0x00001800) >> 11; /* need ubstract 1 to map to the mmc device id * see the comments in board_mmc_init function */ dev_no--; if (dev_no < 0) dev_no = CONFIG_SYS_MMC_ENV_DEV; return dev_no; } int board_mmc_getcd(struct mmc *mmc) { struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; int ret = 0; switch (cfg->esdhc_base) { case USDHC2_BASE_ADDR: ret = 1; /* Assume uSDHC2 is always present */ break; case USDHC3_BASE_ADDR: ret = !gpio_get_value(USDHC3_CD_GPIO); break; case USDHC4_BASE_ADDR: #ifdef CONFIG_MX6SXSABRESD_EMMC_REWORK ret = 1; #else ret = !gpio_get_value(USDHC4_CD_GPIO); #endif break; } return ret; } int board_mmc_init(bd_t *bis) { int i; /* * According to the board_mmc_init() the following map is done: * (U-boot device node) (Physical Port) * mmc0 USDHC2 * mmc1 USDHC3 * mmc2 USDHC4 */ for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { switch (i) { case 0: imx_iomux_v3_setup_multiple_pads( usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); break; case 1: imx_iomux_v3_setup_multiple_pads( usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); gpio_direction_input(USDHC3_CD_GPIO); gpio_direction_output(USDHC3_PWR_GPIO, 1); usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); break; case 2: #ifdef CONFIG_MX6SXSABRESD_EMMC_REWORK imx_iomux_v3_setup_multiple_pads( usdhc4_emmc_pads, ARRAY_SIZE(usdhc4_emmc_pads)); #else imx_iomux_v3_setup_multiple_pads( usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); gpio_direction_input(USDHC4_CD_GPIO); #endif usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); break; default: printf("Warning: you configured more USDHC controllers" "(%d) than supported by the board\n", i + 1); return 0; } if (fsl_esdhc_initialize(bis, &usdhc_cfg[i])) printf("Warning: failed to initialize mmc dev %d\n", i); } return 0; } void board_late_mmc_init(void) { char cmd[32]; u32 dev_no = mmc_get_env_devno(); setenv_ulong("mmcdev", dev_no); sprintf(cmd, "mmc dev %d", dev_no); run_command(cmd, 0); } #endif #ifdef CONFIG_VIDEO_MXS static iomux_v3_cfg_t const lvds_ctrl_pads[] = { /* CABC enable */ MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18 | MUX_PAD_CTRL(NO_PAD_CTRL), /* Use GPIO for Brightness adjustment, duty cycle = period */ MX6SX_PAD_SD1_DATA1__GPIO6_IO_3 | MUX_PAD_CTRL(NO_PAD_CTRL), }; static iomux_v3_cfg_t const lcd_pads[] = { MX6SX_PAD_LCD1_CLK__LCDIF1_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 | MUX_PAD_CTRL(LCD_PAD_CTRL), MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 | MUX_PAD_CTRL(NO_PAD_CTRL), /* Use GPIO for Brightness adjustment, duty cycle = period */ MX6SX_PAD_SD1_DATA2__GPIO6_IO_4 | MUX_PAD_CTRL(NO_PAD_CTRL), }; struct lcd_panel_info_t { unsigned int lcdif_base_addr; int depth; void (*enable)(struct lcd_panel_info_t const *dev); struct fb_videomode mode; }; void do_enable_lvds(struct lcd_panel_info_t const *dev) { enable_lcdif_clock(dev->lcdif_base_addr); enable_lvds(dev->lcdif_base_addr); imx_iomux_v3_setup_multiple_pads(lvds_ctrl_pads, ARRAY_SIZE(lvds_ctrl_pads)); /* Enable CABC */ gpio_direction_output(IMX_GPIO_NR(4, 18) , 1); /* Set Brightness to high */ gpio_direction_output(IMX_GPIO_NR(6, 3) , 1); } void do_enable_parallel_lcd(struct lcd_panel_info_t const *dev) { enable_lcdif_clock(dev->lcdif_base_addr); imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads)); /* Power up the LCD */ gpio_direction_output(IMX_GPIO_NR(3, 27) , 1); /* Set Brightness to high */ gpio_direction_output(IMX_GPIO_NR(6, 4) , 1); } static struct lcd_panel_info_t const displays[] = {{ .lcdif_base_addr = LCDIF2_BASE_ADDR, .depth = 18, .enable = do_enable_lvds, .mode = { .name = "Hannstar-XGA", .xres = 1024, .yres = 768, .pixclock = 15385, .left_margin = 220, .right_margin = 40, .upper_margin = 21, .lower_margin = 7, .hsync_len = 60, .vsync_len = 10, .sync = 0, .vmode = FB_VMODE_NONINTERLACED } }, { .lcdif_base_addr = LCDIF1_BASE_ADDR, .depth = 24, .enable = do_enable_parallel_lcd, .mode = { .name = "MCIMX28LCD", .xres = 800, .yres = 480, .pixclock = 29850, .left_margin = 89, .right_margin = 164, .upper_margin = 23, .lower_margin = 10, .hsync_len = 10, .vsync_len = 10, .sync = 0, .vmode = FB_VMODE_NONINTERLACED } } }; int board_video_skip(void) { int i; int ret; char const *panel = getenv("panel"); if (!panel) { panel = displays[0].mode.name; printf("No panel detected: default to %s\n", panel); i = 0; } else { for (i = 0; i < ARRAY_SIZE(displays); i++) { if (!strcmp(panel, displays[i].mode.name)) break; } } if (i < ARRAY_SIZE(displays)) { ret = mxs_lcd_panel_setup(displays[i].mode, displays[i].depth, displays[i].lcdif_base_addr); if (!ret) { if (displays[i].enable) displays[i].enable(displays+i); printf("Display: %s (%ux%u)\n", displays[i].mode.name, displays[i].mode.xres, displays[i].mode.yres); } else printf("LCD %s cannot be configured: %d\n", displays[i].mode.name, ret); } else { printf("unsupported panel %s\n", panel); return -EINVAL; } return 0; } #endif #ifdef CONFIG_FEC_MXC int board_eth_init(bd_t *bis) { int ret; setup_iomux_fec(CONFIG_FEC_ENET_DEV); ret = fecmxc_initialize_multi(bis, CONFIG_FEC_ENET_DEV, CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE); if (ret) printf("FEC%d MXC: %s:failed\n", CONFIG_FEC_ENET_DEV, __func__); return 0; } static int setup_fec(int fec_id) { struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs = (struct iomuxc_gpr_base_regs *) IOMUXC_GPR_BASE_ADDR; int ret; if (0 == fec_id) /* Use 125M anatop loopback REF_CLK1 for ENET1, clear gpr1[13], gpr1[17]*/ clrsetbits_le32(&iomuxc_gpr_regs->gpr[1], IOMUX_GPR1_FEC1_MASK, 0); else /* Use 125M anatop loopback REF_CLK1 for ENET2, clear gpr1[14], gpr1[18]*/ clrsetbits_le32(&iomuxc_gpr_regs->gpr[1], IOMUX_GPR1_FEC2_MASK, 0); imx_iomux_v3_setup_multiple_pads(phy_control_pads, ARRAY_SIZE(phy_control_pads)); /* Enable the ENET power, active low */ gpio_direction_output(IMX_GPIO_NR(2, 6) , 0); /* Reset AR8031 PHY */ gpio_direction_output(IMX_GPIO_NR(2, 7) , 0); udelay(500); gpio_set_value(IMX_GPIO_NR(2, 7), 1); ret = enable_fec_anatop_clock(fec_id, ENET_125MHz); if (ret) return ret; enable_enet_clock(); return 0; } int board_phy_config(struct phy_device *phydev) { /* Enable 1.8V(SEL_1P5_1P8_POS_REG) on Phy control debug reg 0 */ phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f); phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8); /* rgmii tx clock delay enable */ phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05); phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); if (phydev->drv->config) phydev->drv->config(phydev); return 0; } #endif #ifdef CONFIG_PFUZE100_PMIC_I2C #define PFUZE100_DEVICEID 0x0 #define PFUZE100_REVID 0x3 #define PFUZE100_FABID 0x4 #define PFUZE100_SW1ABVOL 0x20 #define PFUZE100_SW1ABSTBY 0x21 #define PFUZE100_SW1ABCONF 0x24 #define PFUZE100_SW1CVOL 0x2e #define PFUZE100_SW1CSTBY 0x2f #define PFUZE100_SW1CCONF 0x32 #define PFUZE100_SW1ABC_SETP(x) ((x - 3000) / 250) #define PFUZE100_VGEN5CTL 0x70 static int setup_pmic_voltages(void) { unsigned char value, rev_id = 0; i2c_set_bus_num(CONFIG_PMIC_I2C_BUS); i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_PMIC_I2C_SLAVE); if (!i2c_probe(CONFIG_PMIC_I2C_SLAVE)) { if (i2c_read(CONFIG_PMIC_I2C_SLAVE, PFUZE100_DEVICEID, 1, &value, 1)) { printf("Read device ID error!\n"); return -1; } if (i2c_read(CONFIG_PMIC_I2C_SLAVE, PFUZE100_REVID, 1, &rev_id, 1)) { printf("Read Rev ID error!\n"); return -1; } printf("Found PFUZE100! deviceid 0x%x, revid 0x%x\n", value, rev_id); /* set SW1AB standby volatage 0.975V */ if (i2c_read(CONFIG_PMIC_I2C_SLAVE, PFUZE100_SW1ABSTBY, 1, &value, 1)) { printf("Read SW1ABSTBY error!\n"); return -1; } value &= ~0x3f; value |= PFUZE100_SW1ABC_SETP(9750); if (i2c_write(CONFIG_PMIC_I2C_SLAVE, PFUZE100_SW1ABSTBY, 1, &value, 1)) { printf("Set SW1ABSTBY error!\n"); return -1; } /* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */ if (i2c_read(CONFIG_PMIC_I2C_SLAVE, PFUZE100_SW1ABCONF, 1, &value, 1)) { printf("Read SW1ABCONFIG error!\n"); return -1; } value &= ~0xc0; value |= 0x40; if (i2c_write(CONFIG_PMIC_I2C_SLAVE, PFUZE100_SW1ABCONF, 1, &value, 1)) { printf("Set SW1ABCONFIG error!\n"); return -1; } /* set SW1C standby volatage 0.975V */ if (i2c_read(CONFIG_PMIC_I2C_SLAVE, PFUZE100_SW1CSTBY, 1, &value, 1)) { printf("Read SW1CSTBY error!\n"); return -1; } value &= ~0x3f; value |= PFUZE100_SW1ABC_SETP(9750); if (i2c_write(CONFIG_PMIC_I2C_SLAVE, PFUZE100_SW1CSTBY, 1, &value, 1)) { printf("Set SW1CSTBY error!\n"); return -1; } /* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */ if (i2c_read(CONFIG_PMIC_I2C_SLAVE, PFUZE100_SW1CCONF, 1, &value, 1)) { printf("Read SW1CCONFIG error!\n"); return -1; } value &= ~0xc0; value |= 0x40; if (i2c_write(CONFIG_PMIC_I2C_SLAVE, PFUZE100_SW1CCONF, 1, &value, 1)) { printf("Set SW1CCONFIG error!\n"); return -1; } /* Enable power of VGEN5 3V3, needed for SD3 */ if (i2c_read(CONFIG_PMIC_I2C_SLAVE, PFUZE100_VGEN5CTL, 1, &value, 1)) { printf("Read VGEN5CTL error!\n"); return -1; } value &= ~0x1F; value |= 0x1F; if (i2c_write(CONFIG_PMIC_I2C_SLAVE, PFUZE100_VGEN5CTL, 1, &value, 1)) { printf("Set VGEN5CTL error!\n"); return -1; } } return 0; } #ifdef CONFIG_LDO_BYPASS_CHECK void ldo_mode_set(int ldo_bypass) { unsigned char value; /* switch to ldo_bypass mode */ if (ldo_bypass) { /* decrease VDDARM to 1.15V */ if (i2c_read(CONFIG_PMIC_I2C_SLAVE, PFUZE100_SW1ABVOL, 1, &value, 1)) { printf("Read SW1AB error!\n"); return; } value &= ~0x3f; value |= PFUZE100_SW1ABC_SETP(11500); if (i2c_write(CONFIG_PMIC_I2C_SLAVE, PFUZE100_SW1ABVOL, 1, &value, 1)) { printf("Set SW1AB error!\n"); return; } /* increase VDDSOC to 1.15V */ if (i2c_read(CONFIG_PMIC_I2C_SLAVE, PFUZE100_SW1CVOL, 1, &value, 1)) { printf("Read SW1C error!\n"); return; } value &= ~0x3f; value |= PFUZE100_SW1ABC_SETP(11500); if (i2c_write(CONFIG_PMIC_I2C_SLAVE, PFUZE100_SW1CVOL, 1, &value, 1)) { printf("Set SW1C error!\n"); return; } set_anatop_bypass(); printf("switch to ldo_bypass mode!\n"); } } #endif #endif #ifdef CONFIG_MXC_RDC static rdc_peri_cfg_t const shared_resources[] = { (RDC_PER_GPIO1 | RDC_DOMAIN(0) | RDC_DOMAIN(1)), }; #endif int board_early_init_f(void) { #ifdef CONFIG_MXC_RDC imx_rdc_setup_peripherals(shared_resources, ARRAY_SIZE(shared_resources)); #endif #ifdef CONFIG_SYS_AUXCORE_FASTUP arch_auxiliary_core_up(0, CONFIG_SYS_AUXCORE_BOOTDATA); #endif setup_iomux_uart(); return 0; } int board_init(void) { /* Address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; /* Enable PERI_3V3, which is used by SD2, ENET, LVDS, BT */ imx_iomux_v3_setup_multiple_pads(peri_3v3_pads, ARRAY_SIZE(peri_3v3_pads)); /* Active high for ncp692 */ gpio_direction_output(IMX_GPIO_NR(4, 16) , 1); #ifdef CONFIG_SYS_I2C_MXC setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); #endif #ifdef CONFIG_FEC_MXC setup_fec(CONFIG_FEC_ENET_DEV); #endif #ifdef CONFIG_QSPI board_qspi_init(); #endif return 0; } #ifdef CONFIG_CMD_BMODE static const struct boot_mode board_boot_modes[] = { /* 4 bit bus width */ {"sd4", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)}, {"qspi2", MAKE_CFGVAL(0x18, 0x00, 0x00, 0x00)}, {NULL, 0}, }; #endif int board_late_init(void) { #ifdef CONFIG_CMD_BMODE add_board_boot_modes(board_boot_modes); #endif #ifdef CONFIG_PFUZE100_PMIC_I2C int ret = 0; ret = setup_pmic_voltages(); if (ret) return -1; #endif #ifdef CONFIG_ENV_IS_IN_MMC board_late_mmc_init(); #endif return 0; } u32 get_board_rev(void) { return get_cpu_rev(); } int checkboard(void) { puts("Board: MX6SX SABRE SDB\n"); return 0; } #ifdef CONFIG_USB_EHCI_MX6 iomux_v3_cfg_t const usb_otg1_pads[] = { MX6SX_PAD_GPIO1_IO09__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL) }; iomux_v3_cfg_t const usb_otg2_pads[] = { MX6SX_PAD_GPIO1_IO12__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), }; int board_ehci_hcd_init(int port) { switch (port) { case 0: imx_iomux_v3_setup_multiple_pads(usb_otg1_pads, ARRAY_SIZE(usb_otg1_pads)); break; case 1: imx_iomux_v3_setup_multiple_pads(usb_otg2_pads, ARRAY_SIZE(usb_otg2_pads)); break; default: printf("MXC USB port %d not yet supported\n", port); return 1; } return 0; } #endif #ifdef CONFIG_FASTBOOT void board_fastboot_setup(void) { switch (get_boot_device()) { #if defined(CONFIG_FASTBOOT_STORAGE_MMC) case SD2_BOOT: case MMC2_BOOT: if (!getenv("fastboot_dev")) setenv("fastboot_dev", "mmc0"); if (!getenv("bootcmd")) setenv("bootcmd", "booti mmc0"); break; case SD3_BOOT: case MMC3_BOOT: if (!getenv("fastboot_dev")) setenv("fastboot_dev", "mmc1"); if (!getenv("bootcmd")) setenv("bootcmd", "booti mmc1"); break; case SD4_BOOT: case MMC4_BOOT: if (!getenv("fastboot_dev")) setenv("fastboot_dev", "mmc2"); if (!getenv("bootcmd")) setenv("bootcmd", "booti mmc2"); break; #endif /*CONFIG_FASTBOOT_STORAGE_MMC*/ default: printf("unsupported boot devices\n"); break; } } #ifdef CONFIG_ANDROID_RECOVERY #define GPIO_VOL_DN_KEY IMX_GPIO_NR(1, 18) iomux_v3_cfg_t const recovery_key_pads[] = { (MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 | MUX_PAD_CTRL(BUTTON_PAD_CTRL)), }; int check_recovery_cmd_file(void) { int button_pressed = 0; int recovery_mode = 0; recovery_mode = recovery_check_and_clean_flag(); /* Check Recovery Combo Button press or not. */ imx_iomux_v3_setup_multiple_pads(recovery_key_pads, ARRAY_SIZE(recovery_key_pads)); gpio_direction_input(GPIO_VOL_DN_KEY); if (gpio_get_value(GPIO_VOL_DN_KEY) == 0) { /* VOL_DN key is low assert */ button_pressed = 1; printf("Recovery key pressed\n"); } return recovery_mode || button_pressed; } void board_recovery_setup(void) { int bootdev = get_boot_device(); switch (bootdev) { #if defined(CONFIG_FASTBOOT_STORAGE_MMC) case SD2_BOOT: case MMC2_BOOT: if (!getenv("bootcmd_android_recovery")) setenv("bootcmd_android_recovery", "booti mmc0 recovery"); break; case SD3_BOOT: case MMC3_BOOT: if (!getenv("bootcmd_android_recovery")) setenv("bootcmd_android_recovery", "booti mmc1 recovery"); break; case SD4_BOOT: case MMC4_BOOT: if (!getenv("bootcmd_android_recovery")) setenv("bootcmd_android_recovery", "booti mmc2 recovery"); break; #endif /*CONFIG_FASTBOOT_STORAGE_MMC*/ default: printf("Unsupported bootup device for recovery: dev: %d\n", bootdev); return; } printf("setup env for recovery..\n"); setenv("bootcmd", "run bootcmd_android_recovery"); } #endif /*CONFIG_ANDROID_RECOVERY*/ #endif /*CONFIG_FASTBOOT*/ #ifdef CONFIG_IMX_UDC iomux_v3_cfg_t const otg_udc_pads[] = { (MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL)), }; void udc_pins_setting(void) { imx_iomux_v3_setup_multiple_pads(otg_udc_pads, ARRAY_SIZE(otg_udc_pads)); } #endif /*CONFIG_IMX_UDC*/