/* * (C) Copyright 2001-2011 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * Modified during 2001 by * Advanced Communications Technologies (Australia) Pty. Ltd. * Howard Walker, Tuong Vu-Dinh * * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com * Added support for the 16M dram simm on the 8260ads boards * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include /* * PBI Page Based Interleaving * PSDMR_PBI page based interleaving * 0 bank based interleaving * External Address Multiplexing (EAMUX) adds a clock to address cycles * (this can help with marginal board layouts) * PSDMR_EAMUX adds a clock * 0 no extra clock * Buffer Command (BUFCMD) adds a clock to command cycles. * PSDMR_BUFCMD adds a clock * 0 no extra clock */ #define CONFIG_PBI 0 #define PESSIMISTIC_SDRAM 0 #define EAMUX 0 /* EST requires EAMUX */ #define BUFCMD 0 /* * I/O Port configuration table * * if conf is 1, then that port pin will be configured at boot time * according to the five values podr/pdir/ppar/psor/pdat for that entry */ const iop_conf_t iop_conf_tab[4][32] = { /* Port A configuration */ { /* conf ppar psor pdir podr pdat */ /* PA31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxENB */ /* PA30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 TxClav */ /* PA29 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxSOC */ /* PA28 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 RxENB */ /* PA27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxSOC */ /* PA26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxClav */ /* PA25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */ /* PA24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */ /* PA23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */ /* PA22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */ /* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[4] */ /* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[5] */ /* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[6] */ /* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[7] */ /* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */ /* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */ /* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */ /* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */ /* PA13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */ /* PA12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */ /* PA11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */ /* PA10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */ /* PA9 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 L1TXD */ /* PA8 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 L1RXD */ /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */ /* PA6 */ { 1, 1, 1, 1, 0, 0 }, /* TDM A1 L1RSYNC */ /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */ /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */ /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */ /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */ /* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* FREERUN */ /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */ }, /* Port B configuration */ { /* conf ppar psor pdir podr pdat */ /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ /* PB17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */ /* PB16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */ /* PB15 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */ /* PB14 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */ /* PB13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:COL */ /* PB12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:CRS */ /* PB11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ /* PB10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ /* PB9 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ /* PB8 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ /* PB7 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ /* PB6 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ /* PB5 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ /* PB4 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ }, /* Port C */ { /* conf ppar psor pdir podr pdat */ /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */ /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */ /* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */ /* PC28 */ { 0, 0, 0, 1, 0, 0 }, /* PC28 */ /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* UART Clock in */ /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */ /* PC25 */ { 0, 0, 0, 1, 0, 0 }, /* PC25 */ /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */ /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */ /* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */ /* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */ /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */ /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK CLK13 */ /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK14) */ /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */ /* PC16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK16) */ /* PC15 */ { 0, 0, 0, 1, 0, 0 }, /* PC15 */ /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */ /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */ /* PC12 */ { 0, 1, 0, 1, 0, 0 }, /* PC12 */ /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* LXT971 transmit control */ /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* LXT970 FETHMDC */ /* PC9 */ { 1, 0, 0, 0, 0, 0 }, /* LXT970 FETHMDIO */ /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */ /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */ /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */ /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */ /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */ /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */ /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */ /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */ /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */ }, /* Port D */ { /* conf ppar psor pdir podr pdat */ /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */ /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */ /* PD29 */ { 0, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */ /* PD28 */ { 0, 1, 0, 0, 0, 0 }, /* PD28 */ /* PD27 */ { 0, 1, 1, 1, 0, 0 }, /* PD27 */ /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* PD26 */ /* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */ /* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */ /* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */ /* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */ /* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */ /* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */ /* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */ /* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */ /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */ /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */ /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */ /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */ /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TXD */ /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RXD */ /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */ /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */ /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */ /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */ /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ } }; typedef struct bscr_ { unsigned long bcsr0; unsigned long bcsr1; unsigned long bcsr2; unsigned long bcsr3; unsigned long bcsr4; unsigned long bcsr5; unsigned long bcsr6; unsigned long bcsr7; } bcsr_t; typedef struct pci_ic_s { unsigned long pci_int_stat; unsigned long pci_int_mask; } pci_ic_t; void reset_phy(void) { volatile bcsr_t *bcsr = (bcsr_t *)CONFIG_SYS_BCSR; /* reset the FEC port */ bcsr->bcsr1 &= ~FETH_RST; bcsr->bcsr1 |= FETH_RST; } int board_early_init_f(void) { volatile bcsr_t *bcsr = (bcsr_t *)CONFIG_SYS_BCSR; volatile pci_ic_t *pci_ic = (pci_ic_t *)CONFIG_SYS_PCI_INT; bcsr->bcsr1 = ~FETHIEN & ~RS232EN_1 & ~RS232EN_2; /* mask all PCI interrupts */ pci_ic->pci_int_mask |= 0xfff00000; return 0; } int checkboard(void) { puts("Board: Motorola MPC8266ADS\n"); return 0; } phys_size_t initdram(int board_type) { /* Autoinit part stolen from board/sacsng/sacsng.c */ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8260_t *memctl = &immap->im_memctl; volatile uchar c = 0xff; volatile uchar *ramaddr = (uchar *) (CONFIG_SYS_SDRAM_BASE + 0x8); uint psdmr = CONFIG_SYS_PSDMR; int i; uint psrt = 0x21; /* for no SPD */ uint chipselects = 1; /* for no SPD */ uint sdram_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; /* for no SPD */ uint or = CONFIG_SYS_OR2_PRELIM; /* for no SPD */ uint data_width; uint rows; uint banks; uint cols; uint caslatency; uint width; uint rowst; uint sdam; uint bsma; uint sda10; u_char spd_size; u_char data; u_char cksum; int j; /* * Keep the compiler from complaining about * potentially uninitialized vars */ data_width = rows = banks = cols = caslatency = 0; /* * Read the SDRAM SPD EEPROM via I2C. */ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); i2c_read(SDRAM_SPD_ADDR, 0, 1, &data, 1); spd_size = data; cksum = data; for (j = 1; j < 64; j++) { /* read only the checksummed bytes */ /* note: the I2C address autoincrements when alen == 0 */ i2c_read(SDRAM_SPD_ADDR, 0, 0, &data, 1); /*printf("addr %d = 0x%02x\n", j, data); */ if (j == 5) chipselects = data & 0x0F; else if (j == 6) data_width = data; else if (j == 7) data_width |= data << 8; else if (j == 3) rows = data & 0x0F; else if (j == 4) cols = data & 0x0F; else if (j == 12) { /* * Refresh rate: this assumes the prescaler is set to * approximately 0.39uSec per tick and the target * refresh period is about 85% of maximum. */ switch (data & 0x7F) { default: case 0: psrt = 0x21; /* 15.625uS */ break; case 1: psrt = 0x07; /* 3.9uS */ break; case 2: psrt = 0x0F; /* 7.8uS */ break; case 3: psrt = 0x43; /* 31.3uS */ break; case 4: psrt = 0x87; /* 62.5uS */ break; case 5: psrt = 0xFF; /* 125uS */ break; } } else if (j == 17) banks = data; else if (j == 18) { caslatency = 3; /* default CL */ #if (PESSIMISTIC_SDRAM) if ((data & 0x04) != 0) caslatency = 3; else if ((data & 0x02) != 0) caslatency = 2; else if ((data & 0x01) != 0) caslatency = 1; #else if ((data & 0x01) != 0) caslatency = 1; else if ((data & 0x02) != 0) caslatency = 2; else if ((data & 0x04) != 0) caslatency = 3; #endif else { printf("WARNING: Unknown CAS latency 0x%02X, using 3\n", data); } } else if (j == 63) { if (data != cksum) { printf("WARNING: Configuration data checksum failure:" " is 0x%02x, calculated 0x%02x\n", data, cksum); } } cksum += data; } /* We don't trust CL less than 2 (only saw it on an old 16MByte DIMM) */ if (caslatency < 2) { printf("CL was %d, forcing to 2\n", caslatency); caslatency = 2; } if (rows > 14) { printf("This doesn't look good, rows = %d, should be <= 14\n", rows); rows = 14; } if (cols > 11) { printf("This doesn't look good, columns = %d, should be <= 11\n", cols); cols = 11; } if ((data_width != 64) && (data_width != 72)) { printf("WARNING: SDRAM width unsupported, is %d, expected 64 or 72.\n", data_width); } width = 3; /* 2^3 = 8 bytes = 64 bits wide */ /* * Convert banks into log2(banks) */ if (banks == 2) banks = 1; else if (banks == 4) banks = 2; else if (banks == 8) banks = 3; sdram_size = 1 << (rows + cols + banks + width); /* hack for high density memory (512MB per CS) */ /* !!!!! Will ONLY work with Page Based Interleave !!!!! ( PSDMR[PBI] = 1 ) */ /* * memory actually has 11 column addresses, but the memory * controller doesn't really care. * * the calculations that follow will however move the rows so * that they are muxed one bit off if you use 11 bit columns. * * The solution is to tell the memory controller the correct * size of the memory but change the number of columns to 10 * afterwards. * * The 11th column addre will still be mucxed correctly onto * the bus. * * Also be aware that the MPC8266ADS board Rev B has not * connected Row address 13 to anything. * * The fix is to connect ADD16 (from U37-47) to SADDR12 (U28-126) */ if (cols > 10) cols = 10; #if (CONFIG_PBI == 0) /* bank-based interleaving */ rowst = ((32 - 6) - (rows + cols + width)) * 2; #else rowst = 32 - (rows + banks + cols + width); #endif or = ~(sdram_size - 1) | /* SDAM address mask */ ((banks - 1) << 13) | /* banks per device */ (rowst << 9) | /* rowst */ ((rows - 9) << 6); /* numr */ /*printf("memctl->memc_or2 = 0x%08x\n", or); */ /* * SDAM specifies the number of columns that are multiplexed * (reference AN2165/D), defined to be (columns - 6) for page * interleave, (columns - 8) for bank interleave. * * BSMA is 14 - max(rows, cols). The bank select lines come * into play above the highest "address" line going into the * the SDRAM. */ #if (CONFIG_PBI == 0) /* bank-based interleaving */ sdam = cols - 8; bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols); sda10 = sdam + 2; #else sdam = cols + banks - 8; bsma = ((31 - width) - 14) - ((rows > cols) ? rows : cols); sda10 = sdam; #endif #if (PESSIMISTIC_SDRAM) psdmr = (CONFIG_PBI | PSDMR_RFEN | PSDMR_RFRC_16_CLK | PSDMR_PRETOACT_8W | PSDMR_ACTTORW_8W | PSDMR_WRC_4C | PSDMR_EAMUX | PSDMR_BUFCMD) | caslatency | ((caslatency - 1) << 6) | /* LDOTOPRE is CL - 1 */ (sdam << 24) | (bsma << 21) | (sda10 << 18); #else psdmr = (CONFIG_PBI | PSDMR_RFEN | PSDMR_RFRC_7_CLK | PSDMR_PRETOACT_3W | /* 1 for 7E parts (fast PC-133) */ PSDMR_ACTTORW_2W | /* 1 for 7E parts (fast PC-133) */ PSDMR_WRC_1C | /* 1 clock + 7nSec */ EAMUX | BUFCMD) | caslatency | ((caslatency - 1) << 6) | /* LDOTOPRE is CL - 1 */ (sdam << 24) | (bsma << 21) | (sda10 << 18); #endif /*printf("psdmr = 0x%08x\n", psdmr); */ /* * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35): * * "At system reset, initialization software must set up the * programmable parameters in the memory controller banks registers * (ORx, BRx, P/LSDMR). After all memory parameters are configured, * system software should execute the following initialization sequence * for each SDRAM device. * * 1. Issue a PRECHARGE-ALL-BANKS command * 2. Issue eight CBR REFRESH commands * 3. Issue a MODE-SET command to initialize the mode register * * Quote from Micron MT48LC8M16A2 data sheet: * * "...the SDRAM requires a 100uS delay prior to issuing any * command other than a COMMAND INHIBIT or NOP. Starting at some * point during this 100uS period and continuing at least through * the end of this period, COMMAND INHIBIT or NOP commands should * be applied." * * "Once the 100uS delay has been satisfied with at least one COMMAND * INHIBIT or NOP command having been applied, a /PRECHARGE command/ * should be applied. All banks must then be precharged, thereby * placing the device in the all banks idle state." * * "Once in the idle state, /two/ AUTO REFRESH cycles must be * performed. After the AUTO REFRESH cycles are complete, the * SDRAM is ready for mode register programming." * * (/emphasis/ mine, gvb) * * The way I interpret this, Micron start up sequence is: * 1. Issue a PRECHARGE-BANK command (initial precharge) * 2. Issue a PRECHARGE-ALL-BANKS command ("all banks ... precharged") * 3. Issue two (presumably, doing eight is OK) CBR REFRESH commands * 4. Issue a MODE-SET command to initialize the mode register * * -------- * * The initial commands are executed by setting P/LSDMR[OP] and * accessing the SDRAM with a single-byte transaction." * * The appropriate BRx/ORx registers have already been set * when we get here. The SDRAM can be accessed at the address * CONFIG_SYS_SDRAM_BASE. */ memctl->memc_mptpr = CONFIG_SYS_MPTPR; memctl->memc_psrt = psrt; memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM; memctl->memc_or2 = or; memctl->memc_psdmr = psdmr | PSDMR_OP_PREA; *ramaddr = c; memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR; for (i = 0; i < 8; i++) *ramaddr = c; memctl->memc_psdmr = psdmr | PSDMR_OP_MRW; *ramaddr = c; memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN; *ramaddr = c; /* * Do it a second time for the second set of chips if the DIMM has * two chip selects (double sided). */ if (chipselects > 1) { ramaddr += sdram_size; memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM + sdram_size; memctl->memc_or3 = or; memctl->memc_psdmr = psdmr | PSDMR_OP_PREA; *ramaddr = c; memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR; for (i = 0; i < 8; i++) *ramaddr = c; memctl->memc_psdmr = psdmr | PSDMR_OP_MRW; *ramaddr = c; memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN; *ramaddr = c; } /* print info */ printf("SDRAM configuration read from SPD\n"); printf("\tSize per side = %dMB\n", sdram_size >> 20); printf("\tOrganization: %d sides, %d banks, %d Columns, %d Rows, Data width = %d bits\n", chipselects, 1 << (banks), cols, rows, data_width); printf("\tRefresh rate = %d, CAS latency = %d", psrt, caslatency); #if (CONFIG_PBI == 0) /* bank-based interleaving */ printf(", Using Bank Based Interleave\n"); #else printf(", Using Page Based Interleave\n"); #endif printf("\tTotal size: "); /* this delay only needed for original 16MB DIMM... * Not needed for any other memory configuration */ if ((sdram_size * chipselects) == (16 * 1024 * 1024)) udelay(250000); return sdram_size * chipselects; } #ifdef CONFIG_PCI struct pci_controller hose; extern void pci_mpc8250_init(struct pci_controller *); void pci_init_board(void) { pci_mpc8250_init(&hose); } #endif