/* * (C) Copyright 2000, 2001 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com * Add support the Sharp chips on the mpc8260ads. * I started with board/ip860/flash.c and made changes I found in * the MTD project by David Schleef. * * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ #if defined(CONFIG_ENV_IS_IN_FLASH) # ifndef CONFIG_ENV_ADDR # define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) # endif # ifndef CONFIG_ENV_SIZE # define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE # endif # ifndef CONFIG_ENV_SECT_SIZE # define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE # endif #endif /*----------------------------------------------------------------------- * Functions */ static ulong flash_get_size (vu_long *addr, flash_info_t *info); static int write_word (flash_info_t *info, ulong dest, ulong data); static int clear_block_lock_bit(vu_long * addr); /*----------------------------------------------------------------------- */ unsigned long flash_init (void) { #ifndef CONFIG_MPC8266ADS volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; volatile ip860_bcsr_t *bcsr = (ip860_bcsr_t *)BCSR_BASE; #endif unsigned long size; int i; /* Init: enable write, * or we cannot even write flash commands */ #ifndef CONFIG_MPC8266ADS bcsr->bd_ctrl |= BD_CTRL_FLWE; #endif for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { flash_info[i].flash_id = FLASH_UNKNOWN; /* set the default sector offset */ } /* Static FLASH Bank configuration here - FIXME XXX */ size = flash_get_size((vu_long *)FLASH_BASE, &flash_info[0]); if (flash_info[0].flash_id == FLASH_UNKNOWN) { printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", size, size<<20); } #ifndef CONFIG_MPC8266ADS /* Remap FLASH according to real size */ memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000); memctl->memc_br1 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | (memctl->memc_br1 & ~(BR_BA_MSK)); #endif /* Re-do sizing to get full correct info */ size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); flash_info[0].size = size; #if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE /* monitor protection ON by default */ flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, &flash_info[0]); #endif #ifdef CONFIG_ENV_IS_IN_FLASH /* ENV protection ON by default */ flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR, CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1, &flash_info[0]); #endif return (size); } /*----------------------------------------------------------------------- */ void flash_print_info (flash_info_t *info) { int i; if (info->flash_id == FLASH_UNKNOWN) { printf ("missing or unknown FLASH type\n"); return; } switch (info->flash_id & FLASH_VENDMASK) { case FLASH_MAN_INTEL: printf ("Intel "); break; case FLASH_MAN_SHARP: printf ("Sharp "); break; default: printf ("Unknown Vendor "); break; } switch (info->flash_id & FLASH_TYPEMASK) { case FLASH_28F016SV: printf ("28F016SV (16 Mbit, 32 x 64k)\n"); break; case FLASH_28F160S3: printf ("28F160S3 (16 Mbit, 32 x 512K)\n"); break; case FLASH_28F320S3: printf ("28F320S3 (32 Mbit, 64 x 512K)\n"); break; case FLASH_LH28F016SCT: printf ("28F016SC (16 Mbit, 32 x 64K)\n"); break; default: printf ("Unknown Chip Type\n"); break; } printf (" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count); printf (" Sector Start Addresses:"); for (i=0; i<info->sector_count; ++i) { if ((i % 5) == 0) printf ("\n "); printf (" %08lX%s", info->start[i], info->protect[i] ? " (RO)" : " " ); } printf ("\n"); } /*----------------------------------------------------------------------- */ /*----------------------------------------------------------------------- */ /* * The following code cannot be run from FLASH! */ static ulong flash_get_size (vu_long *addr, flash_info_t *info) { short i; ulong value; ulong base = (ulong)addr; ulong sector_offset; /* Write "Intelligent Identifier" command: read Manufacturer ID */ *addr = 0x90909090; value = addr[0] & 0x00FF00FF; switch (value) { case MT_MANUFACT: /* SHARP, MT or => Intel */ case INTEL_ALT_MANU: info->flash_id = FLASH_MAN_INTEL; break; default: printf("unknown manufacturer: %x\n", (unsigned int)value); info->flash_id = FLASH_UNKNOWN; info->sector_count = 0; info->size = 0; return (0); /* no or unknown flash */ } value = addr[1]; /* device ID */ switch (value) { case (INTEL_ID_28F016S): info->flash_id += FLASH_28F016SV; info->sector_count = 32; info->size = 0x00400000; sector_offset = 0x20000; break; /* => 2x2 MB */ case (INTEL_ID_28F160S3): info->flash_id += FLASH_28F160S3; info->sector_count = 32; info->size = 0x00400000; sector_offset = 0x20000; break; /* => 2x2 MB */ case (INTEL_ID_28F320S3): info->flash_id += FLASH_28F320S3; info->sector_count = 64; info->size = 0x00800000; sector_offset = 0x20000; break; /* => 2x4 MB */ case SHARP_ID_28F016SCL: case SHARP_ID_28F016SCZ: info->flash_id = FLASH_MAN_SHARP | FLASH_LH28F016SCT; info->sector_count = 32; info->size = 0x00800000; sector_offset = 0x40000; break; /* => 4x2 MB */ default: info->flash_id = FLASH_UNKNOWN; return (0); /* => no or unknown flash */ } /* set up sector start address table */ for (i = 0; i < info->sector_count; i++) { info->start[i] = base; base += sector_offset; /* don't know how to check sector protection */ info->protect[i] = 0; } /* * Prevent writes to uninitialized FLASH. */ if (info->flash_id != FLASH_UNKNOWN) { addr = (vu_long *)info->start[0]; *addr = 0xFFFFFF; /* reset bank to read array mode */ } return (info->size); } /*----------------------------------------------------------------------- */ int flash_erase (flash_info_t *info, int s_first, int s_last) { int flag, prot, sect; ulong start, now, last; if ((s_first < 0) || (s_first > s_last)) { if (info->flash_id == FLASH_UNKNOWN) { printf ("- missing\n"); } else { printf ("- no sectors to erase\n"); } return 1; } if ( ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) && ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_SHARP) ) { printf ("Can't erase unknown flash type %08lx - aborted\n", info->flash_id); return 1; } prot = 0; for (sect=s_first; sect<=s_last; ++sect) { if (info->protect[sect]) { prot++; } } if (prot) { printf ("- Warning: %d protected sectors will not be erased!\n", prot); } else { printf ("\n"); } /* Make Sure Block Lock Bit is not set. */ if(clear_block_lock_bit((vu_long *)(info->start[s_first]))){ return 1; } /* Start erase on unprotected sectors */ for (sect = s_first; sect<=s_last; sect++) { if (info->protect[sect] == 0) { /* not protected */ vu_long *addr = (vu_long *)(info->start[sect]); last = start = get_timer (0); /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts(); /* Reset Array */ *addr = 0xffffffff; /* Clear Status Register */ *addr = 0x50505050; /* Single Block Erase Command */ *addr = 0x20202020; /* Confirm */ *addr = 0xD0D0D0D0; if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) { /* Resume Command, as per errata update */ *addr = 0xD0D0D0D0; } /* re-enable interrupts if necessary */ if (flag) enable_interrupts(); /* wait at least 80us - let's wait 1 ms */ udelay (1000); while ((*addr & 0x80808080) != 0x80808080) { if(*addr & 0x20202020){ printf("Error in Block Erase - Lock Bit may be set!\n"); printf("Status Register = 0x%X\n", (uint)*addr); *addr = 0xFFFFFFFF; /* reset bank */ return 1; } if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); *addr = 0xFFFFFFFF; /* reset bank */ return 1; } /* show that we're waiting */ if ((now - last) > 1000) { /* every second */ putc ('.'); last = now; } } /* reset to read mode */ *addr = 0xFFFFFFFF; } } printf (" done\n"); return 0; } /*----------------------------------------------------------------------- * Copy memory to flash, returns: * 0 - OK * 1 - write timeout * 2 - Flash not erased */ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) { ulong cp, wp, data; int i, l, rc; wp = (addr & ~3); /* get lower word aligned address */ /* * handle unaligned start bytes */ if ((l = addr - wp) != 0) { data = 0; for (i=0, cp=wp; i<l; ++i, ++cp) { data = (data << 8) | (*(uchar *)cp); } for (; i<4 && cnt>0; ++i) { data = (data << 8) | *src++; --cnt; ++cp; } for (; cnt==0 && i<4; ++i, ++cp) { data = (data << 8) | (*(uchar *)cp); } if ((rc = write_word(info, wp, data)) != 0) { return (rc); } wp += 4; } /* * handle word aligned part */ while (cnt >= 4) { data = 0; for (i=0; i<4; ++i) { data = (data << 8) | *src++; } if ((rc = write_word(info, wp, data)) != 0) { return (rc); } wp += 4; cnt -= 4; } if (cnt == 0) { return (0); } /* * handle unaligned tail bytes */ data = 0; for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { data = (data << 8) | *src++; --cnt; } for (; i<4; ++i, ++cp) { data = (data << 8) | (*(uchar *)cp); } return (write_word(info, wp, data)); } /*----------------------------------------------------------------------- * Write a word to Flash, returns: * 0 - OK * 1 - write timeout * 2 - Flash not erased */ static int write_word (flash_info_t *info, ulong dest, ulong data) { vu_long *addr = (vu_long *)dest; ulong start, csr; int flag; /* Check if Flash is (sufficiently) erased */ if ((*addr & data) != data) { return (2); } /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts(); /* Write Command */ *addr = 0x10101010; /* Write Data */ *addr = data; /* re-enable interrupts if necessary */ if (flag) enable_interrupts(); /* data polling for D7 */ start = get_timer (0); flag = 0; while (((csr = *addr) & 0x80808080) != 0x80808080) { if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { flag = 1; break; } } if (csr & 0x40404040) { printf ("CSR indicates write error (%08lx) at %08lx\n", csr, (ulong)addr); flag = 1; } /* Clear Status Registers Command */ *addr = 0x50505050; /* Reset to read array mode */ *addr = 0xFFFFFFFF; return (flag); } /*----------------------------------------------------------------------- * Clear Block Lock Bit, returns: * 0 - OK * 1 - Timeout */ static int clear_block_lock_bit(vu_long * addr) { ulong start, now; /* Reset Array */ *addr = 0xffffffff; /* Clear Status Register */ *addr = 0x50505050; *addr = 0x60606060; *addr = 0xd0d0d0d0; start = get_timer (0); while(*addr != 0x80808080){ if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout on clearing Block Lock Bit\n"); *addr = 0xFFFFFFFF; /* reset bank */ return 1; } } return 0; }