Freescale MCF5373EVB ColdFire Development Board ================================================ TsiChung Liew(Tsi-Chung.Liew@freescale.com) Created 11/08/07 =========================================== Changed files: ============== - board/freescale/m5373evb/m5373evb.c Dram setup - board/freescale/m5373evb/mii.c Mii access - board/freescale/m5373evb/Makefile Makefile - board/freescale/m5373evb/config.mk config make - board/freescale/m5373evb/u-boot.lds Linker description - arch/m68k/cpu/mcf532x/cpu.c cpu specific code - arch/m68k/cpu/mcf532x/cpu_init.c FBCS, Mux pins, icache and RTC extra regs - arch/m68k/cpu/mcf532x/interrupts.c cpu specific interrupt support - arch/m68k/cpu/mcf532x/speed.c system, pci, flexbus, and cpu clock - arch/m68k/cpu/mcf532x/Makefile Makefile - arch/m68k/cpu/mcf532x/config.mk config make - arch/m68k/cpu/mcf532x/start.S start up assembly code - doc/README.m5373evb This readme file - drivers/net/mcffec.c ColdFire common FEC driver - drivers/serial/mcfuart.c ColdFire common UART driver - drivers/rtc/mcfrtc.c Realtime clock Driver - include/asm-m68k/bitops.h Bit operation function export - include/asm-m68k/byteorder.h Byte order functions - include/asm-m68k/fec.h FEC structure and definition - include/asm-m68k/fsl_i2c.h I2C structure and definition - include/asm-m68k/global_data.h Global data structure - include/asm-m68k/immap.h ColdFire specific header file and driver macros - include/asm-m68k/immap_532x.h mcf532x specific header file - include/asm-m68k/io.h io functions - include/asm-m68k/m532x.h mcf532x specific header file - include/asm-m68k/posix_types.h Posix - include/asm-m68k/processor.h header file - include/asm-m68k/ptrace.h Exception structure - include/asm-m68k/rtc.h Realtime clock header file - include/asm-m68k/string.h String function export - include/asm-m68k/timer.h Timer structure and definition - include/asm-m68k/types.h Data types definition - include/asm-m68k/uart.h Uart structure and definition - include/asm-m68k/u-boot.h u-boot structure - include/configs/M5373EVB.h Board specific configuration file - arch/m68k/lib/board.c board init function - arch/m68k/lib/cache.c - arch/m68k/lib/interrupts Coldfire common interrupt functions - arch/m68k/lib/m68k_linux.c - arch/m68k/lib/time.c Timer functions (Dma timer and PIT) - arch/m68k/lib/traps.c Exception init code 1 MCF5373 specific Options/Settings ==================================== 1.1 pre-loader is no longer suppoer in thie coldfire family 1.2 Configuration settings for M5373EVB Development Board CONFIG_MCF532x -- define for all MCF532x CPUs CONFIG_M5373 -- define for all Freescale MCF5373 CPUs CONFIG_M5373EVB -- define for M5373EVB board CONFIG_MCFUART -- define to use common CF Uart driver CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2 CONFIG_BAUDRATE -- define UART baudrate CONFIG_MCFRTC -- define to use common CF RTC driver CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency RTC_DEBUG -- define to show RTC debug message CONFIG_CMD_DATE -- enable to use date feature in u-boot CONFIG_MCFFEC -- define to use common CF FEC driver CONFIG_MII -- enable to use MII driver CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery CONFIG_SYS_RX_ETH_BUFFER -- Set FEC Receive buffer CONFIG_SYS_FAULT_ECHO_LINK_DOWN-- CONFIG_SYS_FEC0_PINMUX -- Set FEC0 Pin configuration CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register MCFFEC_TOUT_LOOP -- set FEC timeout loop CONFIG_MCFTMR -- define to use DMA timer CONFIG_MCFPIT -- define to use PIT timer CONFIG_SYS_I2C_FSL -- define to use FSL common I2C driver CONFIG_HARD_I2C -- define for I2C hardware support CONFIG_SYS_I2C_SOFT -- define for I2C bit-banged CONFIG_SYS_I2C_SPEED -- define for I2C speed CONFIG_SYS_I2C_SLAVE -- define for I2C slave address CONFIG_SYS_I2C_OFFSET -- define for I2C base address offset CONFIG_SYS_IMMR -- define for MBAR offset CONFIG_SYS_MBAR -- define MBAR offset CONFIG_MONITOR_IS_IN_RAM -- Not support CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF5373 internal SRAM CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base 2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL =========================================== 2.1. System memory map: Flash: 0x00000000-0x3FFFFFFF (1024MB) DDR: 0x40000000-0x7FFFFFFF (1024MB) SRAM: 0x80000000-0x8FFFFFFF (256MB) IP: 0xF0000000-0xFFFFFFFF (256MB) 2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and linux kernel, you can customize it based on your system requirements: Flash0: 0x00000000-0x00FFFFFF (16MB) DDR: 0x40000000-0x4FFFFFFF (256MB) SRAM: 0x80000000-0x80007FFF (32KB) IP: 0xFC000000-0xFC0FFFFF (64KB) 3. COMPILATION ============== 3.1 To create U-Boot the gcc-4.1-xx compiler set (ColdFire ELF or uClinux version) from codesourcery.com was used. Download it from: http://www.codesourcery.com/gnu_toolchains/coldfire/download.html 3.2 Compilation export CROSS_COMPILE=cross-compile-prefix cd u-boot-1.x.x make distclean make M5373EVB_config make 4. SCREEN DUMP ============== 4.1 M5373EVB Development board (NOTE: May not show exactly the same) U-Boot 1.3.0 (Nov 8 2007 - 12:44:08) CPU: Freescale MCF5373 (Mask:65 Version:1) CPU CLK 240 Mhz BUS CLK 80 Mhz Board: Freescale FireEngine 5373 EVB I2C: ready DRAM: 32 MB FLASH: 2 MB In: serial Out: serial Err: serial NAND: 16 MiB Net: FEC0 -> print bootdelay=1 baudrate=115200 ethaddr=00:e0:0c:bc:e5:60 hostname=M5373EVB netdev=eth0 loadaddr=40010000 load=tftp ${loadaddr) ${u-boot} upd=run load; run prog prog=prot off 0 2ffff;era 0 2ffff;cp.b ${loadaddr} 0 ${filesize};save ethact=FEC0 u-boot=u-boot.bin gatewayip=192.168.1.1 netmask=255.255.255.0 ipaddr=192.168.1.3 serverip=192.168.1.2 stdin=serial stdout=serial stderr=serial mem=261632k Environment size: 401/8188 bytes -> bdinfo memstart = 0x40000000 memsize = 0x02000000 flashstart = 0x00000000 flashsize = 0x00200000 flashoffset = 0x00000000 sramstart = 0x80000000 sramsize = 0x00008000 mbar = 0xFC000000 busfreq = 80 MHz ethaddr = 00:E0:0C:BC:E5:60 ip_addr = 192.168.1.3 baudrate = 115200 bps -> -> help ? - alias for 'help' base - print or set address offset bdinfo - print Board Info structure boot - boot default, i.e., run 'bootcmd' bootd - boot default, i.e., run 'bootcmd' bootelf - Boot from an ELF image in memory bootm - boot application image from memory bootp - boot image via network using BootP/TFTP protocol bootvx - Boot vxWorks from an ELF image cmp - memory compare coninfo - print console devices and information cp - memory copy crc32 - checksum calculation date - get/set/reset date & time dcache - enable or disable data cache echo - echo args to console erase - erase FLASH memory flinfo - print FLASH memory information go - start application at address 'addr' help - print online help i2c - I2C sub-system icache - enable or disable instruction cache iminfo - print header information for application image imls - list all images found in flash itest - return true/false on integer compare loadb - load binary file over serial line (kermit mode) loads - load S-Record file over serial line loady - load binary file over serial line (ymodem mode) loop - infinite loop on address range ls - list files in a directory (default /) md - memory display mii - MII utility commands mm - memory modify (auto-incrementing) mtest - simple RAM test mw - memory write (fill) nand - NAND sub-system nboot - boot from NAND device nfs - boot image via network using NFS protocol nm - memory modify (constant address) ping - send ICMP ECHO_REQUEST to network host printenv- print environment variables protect - enable or disable FLASH write protection rarpboot- boot image via network using RARP/TFTP protocol reset - Perform RESET of the CPU run - run commands in an environment variable saveenv - save environment variables to persistent storage setenv - set environment variables sleep - delay execution for some time source - run script from memory tftpboot- boot image via network using TFTP protocol version - print monitor version -> tftp 0x40800000 uImage Using FEC0 device TFTP from server 192.168.1.3; our IP address is 192.168.1.3 Filename 'uImage'. Load address: 0x40800000 Loading: ################################################################# ################################################################# ########## done Bytes transferred = 2053270 (1f5496 hex) -> bootm 0x40800000 ## Booting image at 40800000 ... Image Name: Linux Kernel Image Created: 2007-11-07 20:33:08 UTC Image Type: M68K Linux Kernel Image (gzip compressed) Data Size: 2053206 Bytes = 2 MB Load Address: 40020000 Entry Point: 40020000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Linux version 2.6.22-uc1 (mattw@loa) (gcc version 4.2.1 (Sourcery G++ Lite 4.2-7 uClinux/COLDFIRE(m537x) COLDFIRE port done by Greg Ungerer, gerg@snapgear.com Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne Built 1 zonelists. Total pages: 8128 Kernel command line: rootfstype=romfs PID hash table entries: 128 (order: 7, 512 bytes) Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory available: 28092k/32768k RAM, (1788k kernel code, 244k data) Mount-cache hash table entries: 512 NET: Registered protocol family 16 USB-MCF537x: (HOST module) EHCI device is registered USB-MCF537x: (OTG module) EHCI device is registered USB-MCF537x: (OTG module) UDC device is registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler cfq registered (default) ColdFire internal UART serial driver version 1.00 ttyS0 at 0xfc060000 (irq = 90) is a builtin ColdFire UART ttyS1 at 0xfc064000 (irq = 91) is a builtin ColdFire UART ttyS2 at 0xfc068000 (irq = 92) is a builtin ColdFire UART RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: module loaded nbd: registered device at major 43 usbcore: registered new interface driver ub FEC ENET Version 0.2 fec: PHY @ 0x1, ID 0x20005c90 -- DP83848 eth0: ethernet 00:e0:0c:bc:e5:60 uclinux[mtd]: RAM probe address=0x4021c22c size=0x22b000 Creating 1 MTD partitions on "RAM": 0x00000000-0x0022b000 : "ROMfs" uclinux[mtd]: set ROMfs to be root filesystem NAND device: Manufacturer ID: 0x20, Chip ID: 0x73 (ST Micro NAND 16MiB 3,3V 8-b) Scanning device for bad blocks Creating 1 MTD partitions on "NAND 16MiB 3,3V 8-bit": 0x00000000-0x01000000 : "M53xx flash partition 1" QSPI: spi->max_speed_hz 300000 QSPI: Baud set to 255 SPI: Coldfire master initialized M537x - Disable UART1 when using Audio udc: Freescale MCF53xx UDC driver version 27 October 2006 init udc: MCF53xx USB Device is found. ID=0x5 Rev=0x41 i2c /dev entries driver usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 VFS: Mounted root (romfs filesystem) readonly. Freeing unused kernel memory: 64k freed (0x401f5000 - 0x40204000) init started: BusyBox v1.00 (2007.11.07-19:57+0000) multi-call binary?Setting e Mounting filesystems mount: Mounting devpts on /dev/pts failed: No such device mount: Mounting usbfs on /proc/bus/usb failed: No such file or directory Starting syslogd and klogd Setting up networking on loopback device: Setting up networking on eth0: info, udhcpc (v0.9.9-pre) started eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX. debug, Sending discover... debug, Sending discover... debug, Sending select for 172.27.0.130... info, Lease of 172.27.0.130 obtained, lease time 43200 deleting routers route: SIOC[ADD|DEL]RT: No such process adding dns 172.27.0.1 Starting the boa webserver: Setting time from ntp server: ntp.cs.strath.ac.uk ntp.cs.strath.ac.uk: Unknown host BusyBox v1.00 (2007.11.07-19:57+0000) Built-in shell (msh) Enter 'help' for a list of built-in commands. #