/*------------------------------------------------------------------------------+ */ /* */ /* This source code has been made available to you by IBM on an AS-IS */ /* basis. Anyone receiving this source is licensed under IBM */ /* copyrights to use it in any way he or she deems fit, including */ /* copying it, modifying it, compiling it, and redistributing it either */ /* with or without modifications. No license under IBM patents or */ /* patent applications is to be implied by the copyright license. */ /* */ /* Any user of this software should understand that IBM cannot provide */ /* technical support for this software and will not be responsible for */ /* any consequences resulting from the use of this software. */ /* */ /* Any person who transfers this source code or any derivative work */ /* must include the IBM copyright notice, this paragraph, and the */ /* preceding two paragraphs in the transferred software. */ /* */ /* COPYRIGHT I B M CORPORATION 1995 */ /* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */ /*------------------------------------------------------------------------------- */ /*----------------------------------------------------------------------------- */ /* Function: ext_bus_cntlr_init */ /* Description: Initializes the External Bus Controller for the external */ /* peripherals. IMPORTANT: For pass1 this code must run from */ /* cache since you can not reliably change a peripheral banks */ /* timing register (pbxap) while running code from that bank. */ /* For ex., since we are running from ROM on bank 0, we can NOT */ /* execute the code that modifies bank 0 timings from ROM, so */ /* we run it from cache. */ /* */ /*----------------------------------------------------------------------------- */ #include <config.h> #include <ppc4xx.h> #define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ #include <ppc_asm.tmpl> #include <ppc_defs.h> #include <asm/cache.h> #include <asm/mmu.h> .globl ext_bus_cntlr_init ext_bus_cntlr_init: mflr r4 /* save link register */ bl ..getAddr ..getAddr: mflr r3 /* get address of ..getAddr */ mtlr r4 /* restore link register */ addi r4,0,14 /* set ctr to 10; used to prefetch */ mtctr r4 /* 10 cache lines to fit this function */ /* in cache (gives us 8x10=80 instrctns) */ ..ebcloop: icbt r0,r3 /* prefetch cache line for addr in r3 */ addi r3,r3,32 /* move to next cache line */ bdnz ..ebcloop /* continue for 10 cache lines */ /*------------------------------------------------------------------- */ /* Delay to ensure all accesses to ROM are complete before changing */ /* bank 0 timings. 200usec should be enough. */ /* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */ /*------------------------------------------------------------------- */ addis r3,0,0x0 ori r3,r3,0xA000 /* ensure 200usec have passed since reset */ mtctr r3 ..spinlp: bdnz ..spinlp /* spin loop */ /*----------------------------------------------------------------------- */ /* Memory Bank 0 (Flash) initialization (from openbios) */ /*----------------------------------------------------------------------- */ addi r4,0,pb0ap mtdcr ebccfga,r4 addis r4,0,CS0_AP@h ori r4,r4,CS0_AP@l mtdcr ebccfgd,r4 addi r4,0,pb0cr mtdcr ebccfga,r4 addis r4,0,CS0_CR@h ori r4,r4,CS0_CR@l mtdcr ebccfgd,r4 /*----------------------------------------------------------------------- */ /* Memory Bank 1 (NVRAM/RTC) initialization */ /*----------------------------------------------------------------------- */ addi r4,0,pb1ap mtdcr ebccfga,r4 addis r4,0,CS1_AP@h ori r4,r4,CS1_AP@l mtdcr ebccfgd,r4 addi r4,0,pb1cr mtdcr ebccfga,r4 addis r4,0,CS1_CR@h ori r4,r4,CS1_CR@l mtdcr ebccfgd,r4 /*----------------------------------------------------------------------- */ /* Memory Bank 2 (A/D converter) initialization */ /*----------------------------------------------------------------------- */ addi r4,0,pb2ap mtdcr ebccfga,r4 addis r4,0,CS2_AP@h ori r4,r4,CS2_AP@l mtdcr ebccfgd,r4 addi r4,0,pb2cr mtdcr ebccfga,r4 addis r4,0,CS2_CR@h ori r4,r4,CS2_CR@l mtdcr ebccfgd,r4 /*----------------------------------------------------------------------- */ /* Memory Bank 3 (Ethernet PHY Reset) initialization */ /*----------------------------------------------------------------------- */ addi r4,0,pb3ap mtdcr ebccfga,r4 addis r4,0,CS3_AP@h ori r4,r4,CS3_AP@l mtdcr ebccfgd,r4 addi r4,0,pb3cr mtdcr ebccfga,r4 addis r4,0,CS3_CR@h ori r4,r4,CS3_CR@l mtdcr ebccfgd,r4 /*----------------------------------------------------------------------- */ /* Memory Bank 4 (PC-MIP PRSNT1#) initialization */ /*----------------------------------------------------------------------- */ addi r4,0,pb4ap mtdcr ebccfga,r4 addis r4,0,CS4_AP@h ori r4,r4,CS4_AP@l mtdcr ebccfgd,r4 addi r4,0,pb4cr mtdcr ebccfga,r4 addis r4,0,CS4_CR@h ori r4,r4,CS4_CR@l mtdcr ebccfgd,r4 /*----------------------------------------------------------------------- */ /* Memory Bank 5 (PC-MIP PRSNT2#) initialization */ /*----------------------------------------------------------------------- */ addi r4,0,pb5ap mtdcr ebccfga,r4 addis r4,0,CS5_AP@h ori r4,r4,CS5_AP@l mtdcr ebccfgd,r4 addi r4,0,pb5cr mtdcr ebccfga,r4 addis r4,0,CS5_CR@h ori r4,r4,CS5_CR@l mtdcr ebccfgd,r4 /*----------------------------------------------------------------------- */ /* Memory Bank 6 (CPU LED0) initialization */ /*----------------------------------------------------------------------- */ addi r4,0,pb6ap mtdcr ebccfga,r4 addis r4,0,CS6_AP@h ori r4,r4,CS6_AP@l mtdcr ebccfgd,r4 addi r4,0,pb6cr mtdcr ebccfga,r4 addis r4,0,CS6_CR@h ori r4,r4,CS5_CR@l mtdcr ebccfgd,r4 /*----------------------------------------------------------------------- */ /* Memory Bank 7 (CPU LED1) initialization */ /*----------------------------------------------------------------------- */ addi r4,0,pb7ap mtdcr ebccfga,r4 addis r4,0,CS7_AP@h ori r4,r4,CS7_AP@l mtdcr ebccfgd,r4 addi r4,0,pb7cr mtdcr ebccfga,r4 addis r4,0,CS7_CR@h ori r4,r4,CS7_CR@l mtdcr ebccfgd,r4 /* addis r4,r0,FPGA_BRDC@h */ /* ori r4,r4,FPGA_BRDC@l */ /* lbz r3,0(r4) /###*get FPGA board control reg */ /* eieio */ /* ori r3,r3,0x01 /###*set UART1 control to select CTS/RTS */ /* stb r3,0(r4) */ nop /* pass2 DCR errata #8 */ blr /*----------------------------------------------------------------------------- */ /* Function: sdram_init */ /* Description: Configures SDRAM memory banks on ERIC. */ /* We do manually init our SDRAM. */ /* If we have two SDRAM banks, simply undef SINGLE_BANK (ROLF :-) */ /* It is assumed that a 32MB 12x8(2) SDRAM is used. */ /*----------------------------------------------------------------------------- */ .globl sdram_init sdram_init: mflr r31 #ifdef CONFIG_SYS_SDRAM_MANUALLY /*------------------------------------------------------------------- */ /* Set MB0CF for bank 0. (0-32MB) Address Mode 4 since 12x8(2) */ /*------------------------------------------------------------------- */ addi r4,0,mem_mb0cf mtdcr memcfga,r4 addis r4,0,MB0CF@h ori r4,r4,MB0CF@l mtdcr memcfgd,r4 /*------------------------------------------------------------------- */ /* Set MB1CF for bank 1. (32MB-64MB) Address Mode 4 since 12x8(2) */ /*------------------------------------------------------------------- */ addi r4,0,mem_mb1cf mtdcr memcfga,r4 addis r4,0,MB1CF@h ori r4,r4,MB1CF@l mtdcr memcfgd,r4 /*------------------------------------------------------------------- */ /* Set MB2CF for bank 2. off */ /*------------------------------------------------------------------- */ addi r4,0,mem_mb2cf mtdcr memcfga,r4 addis r4,0,MB2CF@h ori r4,r4,MB2CF@l mtdcr memcfgd,r4 /*------------------------------------------------------------------- */ /* Set MB3CF for bank 3. off */ /*------------------------------------------------------------------- */ addi r4,0,mem_mb3cf mtdcr memcfga,r4 addis r4,0,MB3CF@h ori r4,r4,MB3CF@l mtdcr memcfgd,r4 /*------------------------------------------------------------------- */ /* Set the SDRAM Timing reg, SDTR1 and the refresh timer reg, RTR. */ /* To set the appropriate timings, we need to know the SDRAM speed. */ /* We can use the PLB speed since the SDRAM speed is the same as */ /* the PLB speed. The PLB speed is the FBK divider times the */ /* 405GP reference clock, which on the Walnut board is 33Mhz. */ /* Thus, if FBK div is 2, SDRAM is 66Mhz; if FBK div is 3, SDRAM is */ /* 100Mhz; if FBK is 3, SDRAM is 133Mhz. */ /* NOTE: The Walnut board supports SDRAM speeds of 66Mhz, 100Mhz, and */ /* maybe 133Mhz. */ /*------------------------------------------------------------------- */ mfdcr r5,strap /* determine FBK divider */ /* via STRAP reg to calc PLB speed. */ /* SDRAM speed is the same as the PLB */ /* speed. */ rlwinm r4,r5,4,0x3 /* get FBK divide bits */ ..chk_66: cmpi %cr0,0,r4,0x1 bne ..chk_100 addis r6,0,SDTR_66@h /* SDTR1 value for 66Mhz */ ori r6,r6,SDTR_66@l addis r7,0,RTR_66 /* RTR value for 66Mhz */ b ..sdram_ok ..chk_100: cmpi %cr0,0,r4,0x2 bne ..chk_133 addis r6,0,SDTR_100@h /* SDTR1 value for 100Mhz */ ori r6,r6,SDTR_100@l addis r7,0,RTR_100 /* RTR value for 100Mhz */ b ..sdram_ok ..chk_133: addis r6,0,0x0107 /* SDTR1 value for 133Mhz */ ori r6,r6,0x4015 addis r7,0,0x07F0 /* RTR value for 133Mhz */ ..sdram_ok: /*------------------------------------------------------------------- */ /* Set SDTR1 */ /*------------------------------------------------------------------- */ addi r4,0,mem_sdtr1 mtdcr memcfga,r4 mtdcr memcfgd,r6 /*------------------------------------------------------------------- */ /* Set RTR */ /*------------------------------------------------------------------- */ addi r4,0,mem_rtr mtdcr memcfga,r4 mtdcr memcfgd,r7 /*------------------------------------------------------------------- */ /* Delay to ensure 200usec have elapsed since reset. Assume worst */ /* case that the core is running 200Mhz: */ /* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */ /*------------------------------------------------------------------- */ addis r3,0,0x0000 ori r3,r3,0xA000 /* ensure 200usec have passed since reset */ mtctr r3 ..spinlp2: bdnz ..spinlp2 /* spin loop */ /*------------------------------------------------------------------- */ /* Set memory controller options reg, MCOPT1. */ /* Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst */ /* read/prefetch. */ /*------------------------------------------------------------------- */ addi r4,0,mem_mcopt1 mtdcr memcfga,r4 addis r4,0,0x8080 /* set DC_EN=1 */ ori r4,r4,0x0000 mtdcr memcfgd,r4 /*------------------------------------------------------------------- */ /* Delay to ensure 10msec have elapsed since reset. This is */ /* required for the MPC952 to stabalize. Assume worst */ /* case that the core is running 200Mhz: */ /* 200,000,000 (cycles/sec) X .010 (sec) = 0x1E8480 cycles */ /* This delay should occur before accessing SDRAM. */ /*------------------------------------------------------------------- */ addis r3,0,0x001E ori r3,r3,0x8480 /* ensure 10msec have passed since reset */ mtctr r3 ..spinlp3: bdnz ..spinlp3 /* spin loop */ #else /*fixme: do SDRAM Autoconfig from EEPROM here */ #endif mtlr r31 /* restore lr */ blr