/* * Copyright (C) 2005 Arabella Software Ltd. * Yuli Barcohen <yuli@arabellasw.com> * * Support for Embedded Planet EP88x boards. * Tested on EP88xC with MPC885 CPU, 64MB SDRAM and 16MB flash. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include <common.h> #include <mpc8xx.h> /* * SDRAM uses two Micron chips. * Minimal CPU frequency is 40MHz. */ static uint sdram_table[] = { /* Single read (offset 0x00 in UPM RAM) */ 0xEFCBCC04, 0x0F37C804, 0x0EEEC004, 0x01B98404, 0x1FF74C00, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, /* Burst read (offset 0x08 in UPM RAM) */ 0xEFCBCC04, 0x0F37C804, 0x0EEEC004, 0x00BDC404, 0x00FFCC00, 0x00FFCC00, 0x01FB8C00, 0x1FF74C00, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, /* Single write (offset 0x18 in UPM RAM) */ 0xEFCBCC04, 0x0F37C804, 0x0EEE8002, 0x01B90404, 0x1FF74C05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, /* Burst write (offset 0x20 in UPM RAM) */ 0xEFCBCC04, 0x0F37C804, 0x0EEE8000, 0x00BD4400, 0x00FFCC00, 0x00FFCC02, 0x01FB8C04, 0x1FF74C05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, /* Refresh (offset 0x30 in UPM RAM) */ 0xEFFACC04, 0x0FF5CC04, 0x0FFFCC04, 0x1FFFCC04, 0xFFFFCC05, 0xFFFFCC05, 0xEFFB8C34, 0x0FF74C34, 0x0FFACCB4, 0x0FF5CC34, 0x0FFFC034, 0x0FFFC0B4, /* Exception (offset 0x3C in UPM RAM) */ 0x0FEA8034, 0x1FB54034, 0xFFFFCC34, 0xFFFFCC05 }; int board_early_init_f (void) { vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR; bcsr[0] |= 0x0C; /* Turn the LEDs off */ bcsr[2] |= 0x08; /* Enable flash WE# line - necessary for flash detection by CFI driver */ #if defined(CONFIG_8xx_CONS_SMC1) bcsr[6] |= 0x10; /* Enables RS-232 transceiver */ #endif #if defined(CONFIG_8xx_CONS_SCC2) bcsr[7] |= 0x10; /* Enables RS-232 transceiver */ #endif #ifdef CONFIG_ETHER_ON_FEC1 bcsr[8] |= 0xC0; /* Enable Ethernet 1 PHY */ #endif #ifdef CONFIG_ETHER_ON_FEC2 bcsr[8] |= 0x30; /* Enable Ethernet 2 PHY */ #endif return 0; } phys_size_t initdram (int board_type) { long int msize; volatile immap_t *immap = (volatile immap_t *)CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; upmconfig(UPMA, sdram_table, sizeof(sdram_table) / sizeof(uint)); /* Configure SDRAM refresh */ memctl->memc_mptpr = MPTPR_PTP_DIV2; /* BRGCLK/2 */ memctl->memc_mamr = (65 << 24) | CONFIG_SYS_MAMR; /* No refresh */ udelay(100); /* Run MRS pattern from location 0x36 */ memctl->memc_mar = 0x88; memctl->memc_mcr = 0x80002236; udelay(100); memctl->memc_mamr |= MAMR_PTAE; /* Enable refresh */ memctl->memc_or1 = ~(CONFIG_SYS_SDRAM_MAX_SIZE - 1) | OR_CSNT_SAM; memctl->memc_br1 = CONFIG_SYS_SDRAM_BASE | BR_PS_32 | BR_MS_UPMA | BR_V; msize = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_MAX_SIZE); memctl->memc_or1 |= ~(msize - 1); return msize; } int checkboard( void ) { vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR; puts("Board: "); switch (bcsr[15]) { case 0xE7: puts("EP88xC 1.0"); break; default: printf("unknown ID=%02X", bcsr[15]); } printf(" CPLD revision %d\n", bcsr[14]); return 0; }