/* * (C) Copyright 2008 * Graeme Russ, graeme.russ@gmail.com. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include #ifdef CONFIG_HW_WATCHDOG #include #endif #include "hardware.h" DECLARE_GLOBAL_DATA_PTR; #undef SC520_CDP_DEBUG #ifdef SC520_CDP_DEBUG #define PRINTF(fmt,args...) printf (fmt ,##args) #else #define PRINTF(fmt,args...) #endif unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN; static void enet_timer_isr(void); static void enet_toggle_run_led(void); /* * Miscellaneous platform dependent initializations */ int board_early_init_f(void) { u16 pio_out_cfg = 0x0000; /* Configure General Purpose Bus timing */ writeb(CONFIG_SYS_SC520_GPCSRT, &sc520_mmcr->gpcsrt); writeb(CONFIG_SYS_SC520_GPCSPW, &sc520_mmcr->gpcspw); writeb(CONFIG_SYS_SC520_GPCSOFF, &sc520_mmcr->gpcsoff); writeb(CONFIG_SYS_SC520_GPRDW, &sc520_mmcr->gprdw); writeb(CONFIG_SYS_SC520_GPRDOFF, &sc520_mmcr->gprdoff); writeb(CONFIG_SYS_SC520_GPWRW, &sc520_mmcr->gpwrw); writeb(CONFIG_SYS_SC520_GPWROFF, &sc520_mmcr->gpwroff); /* Configure Programmable Input/Output Pins */ writew(CONFIG_SYS_SC520_PIODIR15_0, &sc520_mmcr->piodir15_0); writew(CONFIG_SYS_SC520_PIODIR31_16, &sc520_mmcr->piodir31_16); writew(CONFIG_SYS_SC520_PIOPFS31_16, &sc520_mmcr->piopfs31_16); writew(CONFIG_SYS_SC520_PIOPFS15_0, &sc520_mmcr->piopfs15_0); writeb(CONFIG_SYS_SC520_CSPFS, &sc520_mmcr->cspfs); writeb(CONFIG_SYS_SC520_CLKSEL, &sc520_mmcr->clksel); /* * Turn off top board * Set StrataFlash chips to 16-bit width * Set StrataFlash chips to normal (non reset/power down) mode */ pio_out_cfg |= CONFIG_SYS_ENET_TOP_BRD_PWR; pio_out_cfg |= CONFIG_SYS_ENET_SF_WIDTH; pio_out_cfg |= CONFIG_SYS_ENET_SF1_MODE; pio_out_cfg |= CONFIG_SYS_ENET_SF2_MODE; writew(pio_out_cfg, &sc520_mmcr->pioset15_0); /* Turn off auxiliary power output */ writew(CONFIG_SYS_ENET_AUX_PWR, &sc520_mmcr->pioclr15_0); /* Clear FPGA program mode */ writew(CONFIG_SYS_ENET_FPGA_PROG, &sc520_mmcr->pioset31_16); /* Configure Programmable Address Regions */ writel(CONFIG_SYS_SC520_UARTA_PAR, &sc520_mmcr->par[2]); writel(CONFIG_SYS_SC520_UARTB_PAR, &sc520_mmcr->par[3]); writel(CONFIG_SYS_SC520_UARTC_PAR, &sc520_mmcr->par[4]); writel(CONFIG_SYS_SC520_UARTD_PAR, &sc520_mmcr->par[5]); writel(CONFIG_SYS_SC520_SDRAM_PAR, &sc520_mmcr->par[6]); writel(CONFIG_SYS_SC520_SF1_PAR, &sc520_mmcr->par[7]); writel(CONFIG_SYS_SC520_SF2_PAR, &sc520_mmcr->par[8]); writel(CONFIG_SYS_SC520_SRAM1_PAR, &sc520_mmcr->par[9]); writel(CONFIG_SYS_SC520_SRAM2_PAR, &sc520_mmcr->par[10]); writel(CONFIG_SYS_SC520_DPRAM_PAR, &sc520_mmcr->par[11]); writel(CONFIG_SYS_SC520_CF1_PAR, &sc520_mmcr->par[12]); writel(CONFIG_SYS_SC520_CF2_PAR, &sc520_mmcr->par[13]); /* writel(CONFIG_SYS_SC520_BOOTCS_PAR, &sc520_mmcr->par14); */ /* writel(CONFIG_SYS_SC520_LLIO_PAR, &sc520_mmcr->par15); */ /* Disable Watchdog */ writew(0x3333, &sc520_mmcr->wdtmrctl); writew(0xcccc, &sc520_mmcr->wdtmrctl); writew(0x0000, &sc520_mmcr->wdtmrctl); /* Chip Select Configuration */ writew(CONFIG_SYS_SC520_BOOTCS_CTRL, &sc520_mmcr->bootcsctl); writew(CONFIG_SYS_SC520_ROMCS1_CTRL, &sc520_mmcr->romcs1ctl); writew(CONFIG_SYS_SC520_ROMCS2_CTRL, &sc520_mmcr->romcs2ctl); writeb(CONFIG_SYS_SC520_ADDDECCTL, &sc520_mmcr->adddecctl); writeb(CONFIG_SYS_SC520_UART1CTL, &sc520_mmcr->uart1ctl); writeb(CONFIG_SYS_SC520_UART2CTL, &sc520_mmcr->uart2ctl); writeb(CONFIG_SYS_SC520_SYSARBCTL, &sc520_mmcr->sysarbctl); writew(CONFIG_SYS_SC520_SYSARBMENB, &sc520_mmcr->sysarbmenb); /* enable posted-writes */ writeb(CONFIG_SYS_SC520_HBCTL, &sc520_mmcr->hbctl); return 0; } int board_early_init_r(void) { /* CPU Speed to 100MHz */ gd->cpu_clk = 100000000; /* Crystal is 33.000MHz */ gd->bus_clk = 33000000; return 0; } int dram_init(void) { init_sc520_dram(); return 0; } void show_boot_progress(int val) { uchar led_mask; led_mask = 0x00; if (val < 0) led_mask |= LED_ERR_BITMASK; led_mask |= (uchar)(val & 0x001f); outb(led_mask, LED_LATCH_ADDRESS); } int last_stage_init(void) { int minor; int major; major = minor = 0; outb(0x00, LED_LATCH_ADDRESS); register_timer_isr (enet_timer_isr); printf("Serck Controls eNET\n"); return 0; } ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info) { if (banknum == 0) { /* non-CFI boot flash */ info->portwidth = FLASH_CFI_8BIT; info->chipwidth = FLASH_CFI_BY8; info->interface = FLASH_CFI_X8; return 1; } else return 0; } int board_eth_init(bd_t *bis) { return pci_eth_init(bis); } void setup_pcat_compatibility() { /* disable global interrupt mode */ writeb(0x40, &sc520_mmcr->picicr); /* set all irqs to edge */ writeb(0x00, &sc520_mmcr->pic_mode[0]); writeb(0x00, &sc520_mmcr->pic_mode[1]); writeb(0x00, &sc520_mmcr->pic_mode[2]); /* * active low polarity on PIC interrupt pins, * active high polarity on all other irq pins */ writew(0x0000,&sc520_mmcr->intpinpol); /* * PIT 0 -> IRQ0 * RTC -> IRQ8 * FP error -> IRQ13 * UART1 -> IRQ4 * UART2 -> IRQ3 */ writeb(SC520_IRQ0, &sc520_mmcr->pit_int_map[0]); writeb(SC520_IRQ8, &sc520_mmcr->rtcmap); writeb(SC520_IRQ13, &sc520_mmcr->ferrmap); writeb(SC520_IRQ4, &sc520_mmcr->uart_int_map[0]); writeb(SC520_IRQ3, &sc520_mmcr->uart_int_map[1]); /* Disable all other interrupt sources */ writeb(SC520_IRQ_DISABLED, &sc520_mmcr->gp_tmr_int_map[0]); writeb(SC520_IRQ_DISABLED, &sc520_mmcr->gp_tmr_int_map[1]); writeb(SC520_IRQ_DISABLED, &sc520_mmcr->gp_tmr_int_map[2]); writeb(SC520_IRQ_DISABLED, &sc520_mmcr->pit_int_map[1]); writeb(SC520_IRQ_DISABLED, &sc520_mmcr->pit_int_map[2]); writeb(SC520_IRQ_DISABLED, &sc520_mmcr->ssimap); writeb(SC520_IRQ_DISABLED, &sc520_mmcr->wdtmap); writeb(SC520_IRQ_DISABLED, &sc520_mmcr->wpvmap); writeb(SC520_IRQ_DISABLED, &sc520_mmcr->icemap); } void enet_timer_isr(void) { static long enet_ticks = 0; enet_ticks++; /* Toggle Watchdog every 100ms */ if ((enet_ticks % 100) == 0) hw_watchdog_reset(); /* Toggle Run LED every 500ms */ if ((enet_ticks % 500) == 0) enet_toggle_run_led(); } void hw_watchdog_reset(void) { /* Watchdog Reset must be atomic */ long flag = disable_interrupts(); if (sc520_mmcr->piodata15_0 & WATCHDOG_PIO_BIT) sc520_mmcr->pioclr15_0 = WATCHDOG_PIO_BIT; else sc520_mmcr->pioset15_0 = WATCHDOG_PIO_BIT; if (flag) enable_interrupts(); } void enet_toggle_run_led(void) { unsigned char leds_state= inb(LED_LATCH_ADDRESS); if (leds_state & LED_RUN_BITMASK) outb(leds_state &~ LED_RUN_BITMASK, LED_LATCH_ADDRESS); else outb(leds_state | LED_RUN_BITMASK, LED_LATCH_ADDRESS); }