/* * (C) Copyright 2003 * DAVE Srl * http://www.dave-tech.it * http://www.wawnet.biz * mailto:info@wawnet.biz * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include /* ------------------------------------------------------------------------- */ /* Prototypes */ int gunzip(void *, int, unsigned char *, unsigned long *); int board_early_init_f (void) { out32(GPIO0_OR, CFG_NAND0_CE); /* set initial outputs */ out32(GPIO0_OR, CFG_NAND1_CE); /* set initial outputs */ /* * IRQ 0-15 405GP internally generated; active high; level sensitive * IRQ 16 405GP internally generated; active low; level sensitive * IRQ 17-24 RESERVED * IRQ 25 (EXT IRQ 0) * IRQ 26 (EXT IRQ 1) * IRQ 27 (EXT IRQ 2) * IRQ 28 (EXT IRQ 3) * IRQ 29 (EXT IRQ 4) * IRQ 30 (EXT IRQ 5) * IRQ 31 (EXT IRQ 6) */ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ mtdcr(uicer, 0x00000000); /* disable all ints */ mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */ mtdcr(uictr, 0x10000000); /* set int trigger levels */ mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ /* * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us */ #if 1 /* test-only */ mtebc (epcr, 0xa8400000); /* ebc always driven */ #else mtebc (epcr, 0x28400000); /* ebc in high-z */ #endif return 0; } /* ------------------------------------------------------------------------- */ int misc_init_f (void) { return 0; /* dummy implementation */ } extern flash_info_t flash_info[]; /* info for FLASH chips */ int misc_init_r (void) { DECLARE_GLOBAL_DATA_PTR; /* adjust flash start and size as well as the offset */ gd->bd->bi_flashstart = 0 - flash_info[0].size; gd->bd->bi_flashoffset= flash_info[0].size - CFG_MONITOR_LEN; #if 0 volatile unsigned short *fpga_mode = (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL); volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4); volatile unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4); bd_t *bd = gd->bd; char * tmp; /* Temporary char pointer */ unsigned char *dst; ulong len = sizeof(fpgadata); int status; int index; int i; unsigned long cntrl0Reg; dst = malloc(CFG_FPGA_MAX_SIZE); if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) { printf ("GUNZIP ERROR - must RESET board to recover\n"); do_reset (NULL, 0, 0, NULL); } status = fpga_boot(dst, len); if (status != 0) { printf("\nFPGA: Booting failed "); switch (status) { case ERROR_FPGA_PRG_INIT_LOW: printf("(Timeout: INIT not low after asserting PROGRAM*)\n "); break; case ERROR_FPGA_PRG_INIT_HIGH: printf("(Timeout: INIT not high after deasserting PROGRAM*)\n "); break; case ERROR_FPGA_PRG_DONE: printf("(Timeout: DONE not high after programming FPGA)\n "); break; } /* display infos on fpgaimage */ index = 15; for (i=0; i<4; i++) { len = dst[index]; printf("FPGA: %s\n", &(dst[index+1])); index += len+3; } putc ('\n'); /* delayed reboot */ for (i=20; i>0; i--) { printf("Rebooting in %2d seconds \r",i); for (index=0;index<1000;index++) udelay(1000); } putc ('\n'); do_reset(NULL, 0, 0, NULL); } puts("FPGA: "); /* display infos on fpgaimage */ index = 15; for (i=0; i<4; i++) { len = dst[index]; printf("%s ", &(dst[index+1])); index += len+3; } putc ('\n'); free(dst); /* * Reset FPGA via FPGA_DATA pin */ SET_FPGA(FPGA_PRG | FPGA_CLK); udelay(1000); /* wait 1ms */ SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA); udelay(1000); /* wait 1ms */ #endif #if 0 /* * Enable power on PS/2 interface */ *fpga_mode |= CFG_FPGA_CTRL_PS2_RESET; /* * Enable interrupts in exar duart mcr[3] */ *duart0_mcr = 0x08; *duart1_mcr = 0x08; #endif return (0); } /* * Check Board Identity: */ int checkboard (void) { unsigned char str[64]; int i = getenv_r ("serial#", str, sizeof(str)); puts ("Board: "); if (i == -1) { puts ("### No HW ID - assuming PPChameleonEVB"); } else { puts(str); } putc ('\n'); return 0; } /* ------------------------------------------------------------------------- */ long int initdram (int board_type) { unsigned long val; mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); #if 0 /* test-only */ for (;;) { NAND_DISABLE_CE(1); udelay(100); NAND_ENABLE_CE(1); udelay(100); } #endif #if 0 printf("\nmb0cf=%x\n", val); /* test-only */ printf("strap=%x\n", mfdcr(strap)); /* test-only */ #endif return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } /* ------------------------------------------------------------------------- */ int testdram (void) { /* TODO: XXX XXX XXX */ printf ("test: 16 MB - ok\n"); return (0); } /* ------------------------------------------------------------------------- */ #if (CONFIG_COMMANDS & CFG_CMD_NAND) extern ulong nand_probe(ulong physadr); void nand_init(void) { ulong totlen = 0; /* The HI model is equipped with a large block NAND chip not supported yet by U-Boot (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_HI) */ #if (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_ME) debug ("Probing at 0x%.8x\n", CFG_NAND0_BASE); totlen += nand_probe (CFG_NAND0_BASE); #endif /* CONFIG_PPCHAMELEON_MODULE_ME, CONFIG_PPCHAMELEON_MODULE_HI */ debug ("Probing at 0x%.8x\n", CFG_NAND1_BASE); totlen += nand_probe (CFG_NAND1_BASE); printf ("%3lu MB\n", totlen >>20); } #endif #ifdef CONFIG_CFB_CONSOLE # ifdef CONFIG_CONSOLE_EXTRA_INFO # include extern GraphicDevice smi; void video_get_info_str (int line_number, char *info) { uint pvr = get_pvr (); /* init video info strings for graphic console */ switch (line_number) { case 1: switch (pvr) { case PVR_405EP_RB: sprintf (info, " IBM PowerPC 405EP Rev. B"); break; default: sprintf (info, " IBM PowerPC 405EP Rev. "); break; } return; case 2: sprintf (info, " DAVE Srl PPChameleonEVB - www.dave-tech.it"); return; case 3: sprintf (info, " %s", smi.modeIdent); return; } /* no more info lines */ *info = 0; return; } # endif /* CONFIG_CONSOLE_EXTRA_INFO */ #endif /* CONFIG_CFB_CONSOLE */