/* * (C) Copyright 2001 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include <common.h> #include <mpc8xx.h> /* ------------------------------------------------------------------------- */ static long int dram_size (long int, long int *, long int); /* ------------------------------------------------------------------------- */ #define _NOT_USED_ 0xFFFFFFFF const uint sdram_table[] = { /* * Single Read. (Offset 0 in UPMA RAM) */ 0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00, 0x1FF77C47, /* last */ /* * SDRAM Initialization (offset 5 in UPMA RAM) * * This is no UPM entry point. The following definition uses * the remaining space to establish an initialization * sequence, which is executed by a RUN command. * */ 0x1FF77C34, 0xEFEABC34, 0x1FB57C35, /* last */ /* * Burst Read. (Offset 8 in UPMA RAM) */ 0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00, 0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Single Write. (Offset 18 in UPMA RAM) */ 0x1F07FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Burst Write. (Offset 20 in UPMA RAM) */ 0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00, 0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Refresh (Offset 30 in UPMA RAM) */ 0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC84, 0xFFFFFC07, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Exception. (Offset 3c in UPMA RAM) */ 0x7FFFFC07, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, }; /* ------------------------------------------------------------------------- */ /* * Check Board Identity: */ int checkboard (void) { unsigned char *s = (unsigned char *)getenv ("serial#"); puts ("Board: TTTech C2MON "); for (; s && *s; ++s) { if (*s == ' ') break; putc (*s); } putc ('\n'); return (0); } /* ------------------------------------------------------------------------- */ long int initdram (int board_type) { volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; unsigned long reg; long int size8, size9; long int size = 0; upmconfig (UPMA, (uint *)sdram_table, sizeof(sdram_table) / sizeof(uint)); /* * Preliminary prescaler for refresh (depends on number of * banks): This value is selected for four cycles every 62.4 us * with two SDRAM banks or four cycles every 31.2 us with one * bank. It will be adjusted after memory sizing. */ memctl->memc_mptpr = CFG_MPTPR_2BK_8K; memctl->memc_mar = 0x00000088; /* * Map controller bank 2 the SDRAM bank 2 at physical address 0. */ memctl->memc_or2 = CFG_OR2_PRELIM; memctl->memc_br2 = CFG_BR2_PRELIM; memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */ udelay (200); /* perform SDRAM initializsation sequence */ memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */ udelay (1); memctl->memc_mcr = 0x80004230; /* SDRAM bank 0 - execute twice */ udelay (1); memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ udelay (1000); /* * Check Bank 0 Memory Size * * try 8 column mode */ size8 = dram_size (CFG_MAMR_8COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE); udelay (1000); /* * try 9 column mode */ size9 = dram_size (CFG_MAMR_9COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE); if (size8 < size9) { /* leave configuration at 9 columns */ size = size9; /* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */ } else { /* back to 8 columns */ size = size8; memctl->memc_mamr = CFG_MAMR_8COL; udelay (500); /* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */ } udelay (1000); /* * Adjust refresh rate depending on SDRAM type * For types > 128 MBit leave it at the current (fast) rate */ if (size < 0x02000000) { /* reduce to 15.6 us (62.4 us / quad) */ memctl->memc_mptpr = CFG_MPTPR_2BK_4K; udelay (1000); } /* * Final mapping */ memctl->memc_or2 = ((-size) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; memctl->memc_br2 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; /* * No bank 1 * * invalidate bank */ memctl->memc_br3 = 0; /* adjust refresh rate depending on SDRAM type, one bank */ reg = memctl->memc_mptpr; reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */ memctl->memc_mptpr = reg; udelay (10000); return (size); } /* ------------------------------------------------------------------------- */ /* * Check memory range for valid RAM. A simple memory test determines * the actually available RAM size between addresses `base' and * `base + maxsize'. Some (not all) hardware errors are detected: * - short between address lines * - short between data lines */ static long int dram_size (long int mamr_value, long int *base, long int maxsize) { volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; memctl->memc_mamr = mamr_value; return (get_ram_size(base, maxsize)); }