/* * U-boot - main board file * * Copyright (c) 2008-2011 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ #include <common.h> #include <netdev.h> #include <asm/blackfin.h> #include <asm/io.h> #include <asm/sdh.h> #include <asm/portmux.h> #include "soft_switch.h" int checkboard(void) { printf("Board: ADI BF609 EZ-Kit board\n"); printf(" Support: http://blackfin.uclinux.org/\n"); return 0; } int board_early_init_f(void) { static const unsigned short pins[] = { P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12, P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21, P_A22, P_A23, P_A24, P_A25, P_NORCK, 0, }; peripheral_request_list(pins, "smc0"); return 0; } #ifdef CONFIG_ETH_DESIGNWARE int board_eth_init(bd_t *bis) { int ret = 0; if (CONFIG_DW_PORTS & 1) { static const unsigned short pins[] = P_RMII0; if (!peripheral_request_list(pins, "emac0")) ret += designware_initialize(EMAC0_MACCFG, 0); } if (CONFIG_DW_PORTS & 2) { static const unsigned short pins[] = P_RMII1; if (!peripheral_request_list(pins, "emac1")) ret += designware_initialize(EMAC1_MACCFG, 0); } return ret; } #endif #ifdef CONFIG_BFIN_SDH int board_mmc_init(bd_t *bis) { return bfin_mmc_init(bis); } #endif /* miscellaneous platform dependent initialisations */ int misc_init_r(void) { printf("other init\n"); return setup_board_switches(); }