/* * (C) Copyright 2007-2008 * Stelian Pop * Lead Tech Design * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include #include #include #include #include #include #include #include #include #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) #include #endif #include DECLARE_GLOBAL_DATA_PTR; /* ------------------------------------------------------------------------- */ /* * Miscelaneous platform dependent initialisations */ #ifdef CONFIG_CMD_NAND static void at91sam9263ek_nand_hw_init(void) { unsigned long csa; /* Enable CS3 */ csa = at91_sys_read(AT91_MATRIX_EBI0CSA); at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA); /* Configure SMC CS3 for NAND/SmartMedia */ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | #ifdef CONFIG_SYS_NAND_DBW_16 AT91_SMC_DBW_16 | #else /* CONFIG_SYS_NAND_DBW_8 */ AT91_SMC_DBW_8 | #endif AT91_SMC_TDF_(2)); at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOA | 1 << AT91SAM9263_ID_PIOCDE); /* Configure RDY/BSY */ at91_set_gpio_input(AT91_PIN_PA22, 1); /* Enable NandFlash */ at91_set_gpio_output(AT91_PIN_PD15, 1); } #endif #ifdef CONFIG_MACB static void at91sam9263ek_macb_hw_init(void) { /* Enable clock */ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_EMAC); /* * Disable pull-up on: * RXDV (PC25) => PHY normal mode (not Test mode) * ERX0 (PE25) => PHY ADDR0 * ERX1 (PE26) => PHY ADDR1 => PHYADDR = 0x0 * * PHY has internal pull-down */ writel(pin_to_mask(AT91_PIN_PC25), pin_to_controller(AT91_PIN_PC0) + PIO_PUDR); writel(pin_to_mask(AT91_PIN_PE25) | pin_to_mask(AT91_PIN_PE26), pin_to_controller(AT91_PIN_PE0) + PIO_PUDR); /* Need to reset PHY -> 500ms reset */ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | (AT91_RSTC_ERSTL & (0x0D << 8)) | AT91_RSTC_URSTEN); at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); /* Wait for end hardware reset */ while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); /* Restore NRST value */ at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | (AT91_RSTC_ERSTL & (0x0 << 8)) | AT91_RSTC_URSTEN); /* Re-enable pull-up */ writel(pin_to_mask(AT91_PIN_PC25), pin_to_controller(AT91_PIN_PC0) + PIO_PUER); writel(pin_to_mask(AT91_PIN_PE25) | pin_to_mask(AT91_PIN_PE26), pin_to_controller(AT91_PIN_PE0) + PIO_PUER); at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */ at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */ at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */ at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */ at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */ at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */ at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */ at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */ at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */ at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */ #ifndef CONFIG_RMII at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */ at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */ at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */ at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */ at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */ at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */ at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */ at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */ #endif } #endif #ifdef CONFIG_USB_OHCI_NEW static void at91sam9263ek_uhp_hw_init(void) { /* Enable VBus on UHP ports */ at91_set_gpio_output(AT91_PIN_PA21, 0); at91_set_gpio_output(AT91_PIN_PA24, 0); } #endif #ifdef CONFIG_LCD vidinfo_t panel_info = { vl_col: 240, vl_row: 320, vl_clk: 4965000, vl_sync: ATMEL_LCDC_INVLINE_INVERTED | ATMEL_LCDC_INVFRAME_INVERTED, vl_bpix: 3, vl_tft: 1, vl_hsync_len: 5, vl_left_margin: 1, vl_right_margin:33, vl_vsync_len: 1, vl_upper_margin:1, vl_lower_margin:0, mmio: AT91SAM9263_LCDC_BASE, }; void lcd_enable(void) { at91_set_gpio_value(AT91_PIN_PA30, 1); /* power up */ } void lcd_disable(void) { at91_set_gpio_value(AT91_PIN_PA30, 0); /* power down */ } static void at91sam9263ek_lcd_hw_init(void) { at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */ at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */ at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */ at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */ at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */ at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */ at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */ at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */ at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */ at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */ at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */ at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */ at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */ at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */ at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */ at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */ at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */ at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */ at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_LCDC); gd->fb_base = AT91SAM9263_SRAM0_BASE; } #ifdef CONFIG_LCD_INFO #include #include void lcd_show_board_info(void) { ulong dram_size, nand_size; int i; char temp[32]; lcd_printf ("%s\n", U_BOOT_VERSION); lcd_printf ("(C) 2008 ATMEL Corp\n"); lcd_printf ("at91support@atmel.com\n"); lcd_printf ("%s CPU at %s MHz\n", AT91_CPU_NAME, strmhz(temp, AT91_CPU_CLOCK)); dram_size = 0; for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) dram_size += gd->bd->bi_dram[i].size; nand_size = 0; for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) nand_size += nand_info[i].size; lcd_printf (" %ld MB SDRAM, %ld MB NAND\n", dram_size >> 20, nand_size >> 20 ); } #endif /* CONFIG_LCD_INFO */ #endif int board_init(void) { /* Enable Ctrlc */ console_init_f(); /* arch number of AT91SAM9263EK-Board */ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9263EK; /* adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; at91_serial_hw_init(); #ifdef CONFIG_CMD_NAND at91sam9263ek_nand_hw_init(); #endif #ifdef CONFIG_HAS_DATAFLASH at91_set_gpio_output(AT91_PIN_PE20, 1); /* select spi0 clock */ at91_spi0_hw_init(1 << 0); #endif #ifdef CONFIG_MACB at91sam9263ek_macb_hw_init(); #endif #ifdef CONFIG_USB_OHCI_NEW at91sam9263ek_uhp_hw_init(); #endif #ifdef CONFIG_LCD at91sam9263ek_lcd_hw_init(); #endif return 0; } int dram_init(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM; gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; return 0; } #ifdef CONFIG_RESET_PHY_R void reset_phy(void) { #ifdef CONFIG_MACB /* * Initialize ethernet HW addr prior to starting Linux, * needed for nfsroot */ eth_init(gd->bd); #endif } #endif int board_eth_init(bd_t *bis) { int rc = 0; #ifdef CONFIG_MACB rc = macb_eth_initialize(0, (void *)AT91SAM9263_BASE_EMAC, 0x00); #endif return rc; }