/* * (C) Copyright 2001 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include <common.h> #include <ioports.h> #include <mpc8260.h> #include <pci.h> /* * I/O Port configuration table * * if conf is 1, then that port pin will be configured at boot time * according to the five values podr/pdir/ppar/psor/pdat for that entry */ const iop_conf_t iop_conf_tab[4][32] = { /* Port A configuration */ { /* conf ppar psor pdir podr pdat */ /* PA31 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII COL */ /* PA30 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII CRS */ /* PA29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_ER */ /* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_EN */ /* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_DV */ /* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_ER */ /* PA25 */ { 1, 0, 0, 1, 0, 0 }, /* FCC2 MII MDIO */ /* PA24 */ { 1, 0, 0, 1, 0, 0 }, /* FCC2 MII MDC */ /* PA23 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 MII MDIO */ /* PA22 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 MII MDC */ /* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[3] */ /* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[2] */ /* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[1] */ /* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[0] */ /* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[0] */ /* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[1] */ /* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[2] */ /* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[3] */ /* PA13 */ { 1, 0, 0, 1, 0, 0 }, /* FCC2 MII TXSL1 */ /* PA12 */ { 1, 0, 0, 1, 0, 1 }, /* FCC2 MII TXSL0 */ /* PA11 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 MII TXSL1 */ /* PA10 */ { 1, 0, 0, 1, 0, 1 }, /* FCC1 MII TXSL0 */ #if 1 /* PA9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC2 TXD */ /* PA8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC2 RXD */ #else /* PA9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC2 TXD */ /* PA8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC2 RXD */ #endif /* PA7 */ { 0, 0, 0, 0, 0, 0 }, /* PA7 */ /* PA6 */ { 1, 0, 0, 1, 0, 1 }, /* FCC2 MII PAUSE */ /* PA5 */ { 1, 0, 0, 1, 0, 1 }, /* FCC1 MII PAUSE */ /* PA4 */ { 1, 0, 0, 1, 0, 0 }, /* FCC2 MII PWRDN */ /* PA3 */ { 1, 0, 0, 1, 0, 0 }, /* FCC1 MII PWRDN */ /* PA2 */ { 0, 0, 0, 0, 0, 0 }, /* PA2 */ /* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* FCC2 MII MDINT */ /* PA0 */ { 1, 0, 0, 1, 0, 0 } /* FCC1 MII MDINT */ }, /* Port B configuration */ { /* conf ppar psor pdir podr pdat */ /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ /* PB17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_DV */ /* PB16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_ER */ /* PB15 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TX_ER */ /* PB14 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TX_EN */ /* PB13 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII COL */ /* PB12 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII CRS */ /* PB11 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD */ /* PB10 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD */ /* PB9 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD */ /* PB8 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD */ /* PB7 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD */ /* PB6 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD */ /* PB5 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD */ /* PB4 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD */ /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* PB3 */ /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* PB2 */ /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* PB1 */ /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* PB0 */ }, /* Port C */ { /* conf ppar psor pdir podr pdat */ /* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */ /* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* PC30 */ /* PC29 */ { 1, 0, 0, 0, 0, 0 }, /* SCC1 CTS */ /* PC28 */ { 1, 0, 0, 0, 0, 0 }, /* SCC2 CTS */ /* PC27 */ { 0, 0, 0, 0, 0, 0 }, /* PC27 */ /* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */ /* PC25 */ { 0, 0, 0, 0, 0, 0 }, /* PC25 */ /* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */ /* PC23 */ { 0, 0, 0, 0, 0, 0 }, /* FDC37C78 DACFD */ /* PC22 */ { 0, 0, 0, 0, 0, 0 }, /* FDC37C78 DNFD */ /* PC21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RX_CLK */ /* PC20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII TX_CLK */ /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK */ /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII TX_CLK */ /* PC17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_CLK */ /* PC16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII TX_CLK */ #if 0 /* PC15 */ { 0, 0, 0, 0, 0, 0 }, /* PC15 */ #else /* PC15 */ { 1, 1, 0, 1, 0, 0 }, /* PC15 */ #endif /* PC14 */ { 0, 0, 0, 0, 0, 0 }, /* PC14 */ /* PC13 */ { 0, 0, 0, 0, 0, 0 }, /* PC13 */ /* PC12 */ { 0, 0, 0, 0, 0, 0 }, /* PC12 */ /* PC11 */ { 0, 0, 0, 0, 0, 0 }, /* PC11 */ /* PC10 */ { 0, 0, 0, 0, 0, 0 }, /* PC10 */ /* PC9 */ { 0, 0, 0, 0, 0, 0 }, /* FC9 */ /* PC8 */ { 0, 0, 0, 0, 0, 0 }, /* PC8 */ /* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */ /* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */ /* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* PC5 */ /* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* PC4 */ /* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* PC3 */ /* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* PC2 */ /* PC1 */ { 0, 0, 0, 0, 0, 0 }, /* PC1 */ /* PC0 */ { 0, 0, 0, 0, 0, 0 }, /* FDC37C78 DRQFD */ }, /* Port D */ { /* conf ppar psor pdir podr pdat */ /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 RXD */ /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 TXD */ /* PD29 */ { 1, 0, 0, 1, 0, 0 }, /* SCC1 RTS */ /* PD28 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RXD */ /* PD27 */ { 1, 1, 0, 1, 0, 0 }, /* SCC2 TXD */ /* PD26 */ { 1, 0, 0, 1, 0, 0 }, /* SCC2 RTS */ /* PD25 */ { 0, 0, 0, 0, 0, 0 }, /* PD25 */ /* PD24 */ { 0, 0, 0, 0, 0, 0 }, /* PD24 */ /* PD23 */ { 0, 0, 0, 0, 0, 0 }, /* PD23 */ /* PD22 */ { 0, 0, 0, 0, 0, 0 }, /* PD22 */ /* PD21 */ { 0, 0, 0, 0, 0, 0 }, /* PD21 */ /* PD20 */ { 0, 0, 0, 0, 0, 0 }, /* PD20 */ /* PD19 */ { 0, 0, 0, 0, 0, 0 }, /* PD19 */ /* PD18 */ { 0, 0, 0, 0, 0, 0 }, /* PD18 */ /* PD17 */ { 0, 0, 0, 0, 0, 0 }, /* PD17 */ /* PD16 */ { 0, 0, 0, 0, 0, 0 }, /* PD16 */ #if defined(CONFIG_SOFT_I2C) /* PD15 */ { 1, 0, 0, 1, 1, 1 }, /* I2C SDA */ /* PD14 */ { 1, 0, 0, 1, 1, 1 }, /* I2C SCL */ #else #if defined(CONFIG_HARD_I2C) /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */ /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */ #else /* normal I/O port pins */ /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */ /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */ #endif #endif /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TXD */ /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RXD */ /* PD7 */ { 0, 0, 0, 0, 0, 0 }, /* PD7 */ /* PD6 */ { 0, 0, 0, 0, 0, 0 }, /* PD6 */ /* PD5 */ { 0, 0, 0, 0, 0, 0 }, /* PD5 */ #if 0 /* PD4 */ { 0, 0, 0, 0, 0, 0 }, /* PD4 */ #else /* PD4 */ { 1, 1, 1, 0, 0, 0 }, /* PD4 */ #endif /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* PD3 */ /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* PD2 */ /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* PD1 */ /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* PD0 */ } }; /* * UPMB initialization table */ #define _NOT_USED_ 0xFFFFFFFF static const uint rtc_table[] = { /* * Single Read. (Offset 0 in UPMA RAM) */ 0xfffec00, 0xfffac00, 0xfff2d00, 0xfef2800, 0xfaf2080, 0xfaf2080, 0xfff2400, 0x1fff6c05, /* last */ /* * Burst Read. (Offset 8 in UPMA RAM) */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Single Write. (Offset 18 in UPMA RAM) */ 0xfffec00, 0xfffac00, 0xfff2d00, 0xfef2800, 0xfaf2080, 0xfaf2080, 0xfaf2400, 0x1fbf6c05, /* last */ /* * Burst Write. (Offset 20 in UPMA RAM) */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Refresh (Offset 30 in UPMA RAM) */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Exception. (Offset 3c in UPMA RAM) */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, }; /* ------------------------------------------------------------------------- */ /* Check Board Identity: */ int checkboard (void) { printf ("Board: ATC\n"); return 0; } /* ------------------------------------------------------------------------- */ /* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx * * This routine performs standard 8260 initialization sequence * and calculates the available memory size. It may be called * several times to try different SDRAM configurations on both * 60x and local buses. */ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, ulong orx, volatile uchar * base) { volatile uchar c = 0xff; volatile uint *sdmr_ptr; volatile uint *orx_ptr; ulong maxsize, size; int i; /* We must be able to test a location outsize the maximum legal size * to find out THAT we are outside; but this address still has to be * mapped by the controller. That means, that the initial mapping has * to be (at least) twice as large as the maximum expected size. */ maxsize = (1 + (~orx | 0x7fff)) / 2; /* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that * we are configuring CS1 if base != 0 */ sdmr_ptr = &memctl->memc_psdmr; orx_ptr = &memctl->memc_or2; *orx_ptr = orx; /* * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35): * * "At system reset, initialization software must set up the * programmable parameters in the memory controller banks registers * (ORx, BRx, P/LSDMR). After all memory parameters are configured, * system software should execute the following initialization sequence * for each SDRAM device. * * 1. Issue a PRECHARGE-ALL-BANKS command * 2. Issue eight CBR REFRESH commands * 3. Issue a MODE-SET command to initialize the mode register * * The initial commands are executed by setting P/LSDMR[OP] and * accessing the SDRAM with a single-byte transaction." * * The appropriate BRx/ORx registers have already been set when we * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE. */ *sdmr_ptr = sdmr | PSDMR_OP_PREA; *base = c; *sdmr_ptr = sdmr | PSDMR_OP_CBRR; for (i = 0; i < 8; i++) *base = c; *sdmr_ptr = sdmr | PSDMR_OP_MRW; *(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */ *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN; *base = c; size = get_ram_size((long *)base, maxsize); *orx_ptr = orx | ~(size - 1); return (size); } int misc_init_r(void) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8260_t *memctl = &immap->im_memctl; upmconfig(UPMA, (uint *)rtc_table, sizeof(rtc_table) / sizeof(uint)); memctl->memc_mamr = MxMR_RLFx_6X | MxMR_WLFx_6X | MxMR_OP_NORM; return (0); } phys_size_t initdram (int board_type) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8260_t *memctl = &immap->im_memctl; #ifndef CONFIG_SYS_RAMBOOT ulong size8, size9; #endif long psize; psize = 8 * 1024 * 1024; memctl->memc_mptpr = CONFIG_SYS_MPTPR; memctl->memc_psrt = CONFIG_SYS_PSRT; #ifndef CONFIG_SYS_RAMBOOT /* 60x SDRAM setup: */ size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL, (uchar *) CONFIG_SYS_SDRAM_BASE); size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR2_9COL, (uchar *) CONFIG_SYS_SDRAM_BASE); if (size8 < size9) { psize = size9; printf ("(60x:9COL) "); } else { psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR2_8COL, (uchar *) CONFIG_SYS_SDRAM_BASE); printf ("(60x:8COL) "); } #endif /* CONFIG_SYS_RAMBOOT */ icache_enable (); return (psize); } #if defined(CONFIG_CMD_DOC) void doc_init (void) { doc_probe (CONFIG_SYS_DOC_BASE); } #endif #ifdef CONFIG_PCI struct pci_controller hose; extern void pci_mpc8250_init(struct pci_controller *); void pci_init_board(void) { pci_mpc8250_init(&hose); } #endif