/* * (C) Copyright 2006 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * (C) Copyright 2006 * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include "sequoia.h" DECLARE_GLOBAL_DATA_PTR; extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ ulong flash_get_size (ulong base, int banknum); int board_early_init_f(void) { u32 sdr0_cust0; u32 sdr0_pfc1, sdr0_pfc2; u32 reg; mtdcr(ebccfga, xbcfg); mtdcr(ebccfgd, 0xb8400000); /*-------------------------------------------------------------------- * Setup the GPIO pins *-------------------------------------------------------------------*/ /* test-only: take GPIO init from pcs440ep ???? in config file */ out32(GPIO0_OR, 0x00000000); out32(GPIO0_TCR, 0x0000000f); out32(GPIO0_OSRL, 0x50015400); out32(GPIO0_OSRH, 0x550050aa); out32(GPIO0_TSRL, 0x50015400); out32(GPIO0_TSRH, 0x55005000); out32(GPIO0_ISR1L, 0x50000000); out32(GPIO0_ISR1H, 0x00000000); out32(GPIO0_ISR2L, 0x00000000); out32(GPIO0_ISR2H, 0x00000100); out32(GPIO0_ISR3L, 0x00000000); out32(GPIO0_ISR3H, 0x00000000); out32(GPIO1_OR, 0x00000000); out32(GPIO1_TCR, 0xc2000000); out32(GPIO1_OSRL, 0x5c280000); out32(GPIO1_OSRH, 0x00000000); out32(GPIO1_TSRL, 0x0c000000); out32(GPIO1_TSRH, 0x00000000); out32(GPIO1_ISR1L, 0x00005550); out32(GPIO1_ISR1H, 0x00000000); out32(GPIO1_ISR2L, 0x00050000); out32(GPIO1_ISR2H, 0x00000000); out32(GPIO1_ISR3L, 0x01400000); out32(GPIO1_ISR3H, 0x00000000); /*-------------------------------------------------------------------- * Setup the interrupt controller polarities, triggers, etc. *-------------------------------------------------------------------*/ mtdcr(uic0sr, 0xffffffff); /* clear all */ mtdcr(uic0er, 0x00000000); /* disable all */ mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */ mtdcr(uic0pr, 0xfffff7ff); /* per ref-board manual */ mtdcr(uic0tr, 0x00000000); /* per ref-board manual */ mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */ mtdcr(uic0sr, 0xffffffff); /* clear all */ mtdcr(uic1sr, 0xffffffff); /* clear all */ mtdcr(uic1er, 0x00000000); /* disable all */ mtdcr(uic1cr, 0x00000000); /* all non-critical */ mtdcr(uic1pr, 0xffffffff); /* per ref-board manual */ mtdcr(uic1tr, 0x00000000); /* per ref-board manual */ mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */ mtdcr(uic1sr, 0xffffffff); /* clear all */ mtdcr(uic2sr, 0xffffffff); /* clear all */ mtdcr(uic2er, 0x00000000); /* disable all */ mtdcr(uic2cr, 0x00000000); /* all non-critical */ mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */ mtdcr(uic2tr, 0x00000000); /* per ref-board manual */ mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */ mtdcr(uic2sr, 0xffffffff); /* clear all */ /* 50MHz tmrclk */ *(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00; /* clear write protects */ *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00; /* enable Ethernet */ *(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0x00; /* enable USB device */ *(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x20; /* select Ethernet pins */ mfsdr(SDR0_PFC1, sdr0_pfc1); sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | SDR0_PFC1_SELECT_CONFIG_4; mfsdr(SDR0_PFC2, sdr0_pfc2); sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | SDR0_PFC2_SELECT_CONFIG_4; mtsdr(SDR0_PFC2, sdr0_pfc2); mtsdr(SDR0_PFC1, sdr0_pfc1); /* PCI arbiter enabled */ mfsdr(sdr_pci0, reg); mtsdr(sdr_pci0, 0x80000000 | reg); /* setup NAND FLASH */ mfsdr(SDR0_CUST0, sdr0_cust0); sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL | SDR0_CUST0_NDFC_ENABLE | SDR0_CUST0_NDFC_BW_8_BIT | SDR0_CUST0_NDFC_ARE_MASK | (0x80000000 >> (28 + CFG_NAND_CS)); mtsdr(SDR0_CUST0, sdr0_cust0); return 0; } /*---------------------------------------------------------------------------+ | misc_init_r. +---------------------------------------------------------------------------*/ int misc_init_r(void) { uint pbcr; int size_val = 0; u32 reg; #ifdef CONFIG_440EPX unsigned long usb2d0cr = 0; unsigned long usb2phy0cr, usb2h0cr = 0; unsigned long sdr0_pfc1; char *act = getenv("usbact"); #endif /* * FLASH stuff... */ /* Re-do sizing to get full correct info */ /* adjust flash start and offset */ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; gd->bd->bi_flashoffset = 0; #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) mtdcr(ebccfga, pb3cr); #else mtdcr(ebccfga, pb0cr); #endif pbcr = mfdcr(ebccfgd); switch (gd->bd->bi_flashsize) { case 1 << 20: size_val = 0; break; case 2 << 20: size_val = 1; break; case 4 << 20: size_val = 2; break; case 8 << 20: size_val = 3; break; case 16 << 20: size_val = 4; break; case 32 << 20: size_val = 5; break; case 64 << 20: size_val = 6; break; case 128 << 20: size_val = 7; break; } pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) mtdcr(ebccfga, pb3cr); #else mtdcr(ebccfga, pb0cr); #endif mtdcr(ebccfgd, pbcr); /* * Re-check to get correct base address */ flash_get_size(gd->bd->bi_flashstart, 0); #ifdef CFG_ENV_IS_IN_FLASH /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, -CFG_MONITOR_LEN, 0xffffffff, &flash_info[0]); /* Env protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND, CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1, &flash_info[0]); #endif /* * USB suff... */ #ifdef CONFIG_440EPX if (act == NULL || strcmp(act, "hostdev") == 0) { /* SDR Setting */ mfsdr(SDR0_PFC1, sdr0_pfc1); mfsdr(SDR0_USB0, usb2d0cr); mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); mfsdr(SDR0_USB2H0CR, usb2h0cr); usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1*/ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/ /* An 8-bit/60MHz interface is the only possible alternative when connecting the Device to the PHY */ usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK; usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1*/ /* To enable the USB 2.0 Device function through the UTMI interface */ usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK; usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION; /*1*/ sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK; sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL; /*0*/ mtsdr(SDR0_PFC1, sdr0_pfc1); mtsdr(SDR0_USB0, usb2d0cr); mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); mtsdr(SDR0_USB2H0CR, usb2h0cr); /*clear resets*/ udelay (1000); mtsdr(SDR0_SRST1, 0x00000000); udelay (1000); mtsdr(SDR0_SRST0, 0x00000000); printf("USB: Host(int phy) Device(ext phy)\n"); } else if (strcmp(act, "dev") == 0) { /*-------------------PATCH-------------------------------*/ mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/ mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); udelay (1000); mtsdr(SDR0_SRST1, 0x672c6000); udelay (1000); mtsdr(SDR0_SRST0, 0x00000080); udelay (1000); mtsdr(SDR0_SRST1, 0x60206000); *(unsigned int *)(0xe0000350) = 0x00000001; udelay (1000); mtsdr(SDR0_SRST1, 0x60306000); /*-------------------PATCH-------------------------------*/ /* SDR Setting */ mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); mfsdr(SDR0_USB2H0CR, usb2h0cr); mfsdr(SDR0_USB0, usb2d0cr); mfsdr(SDR0_PFC1, sdr0_pfc1); usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ; /*0*/ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; /*1*/ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV; /*0*/ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV; /*0*/ usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK; usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ; /*0*/ usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK; usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION; /*0*/ sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK; sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL; /*1*/ mtsdr(SDR0_USB2H0CR, usb2h0cr); mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); mtsdr(SDR0_USB0, usb2d0cr); mtsdr(SDR0_PFC1, sdr0_pfc1); /*clear resets*/ udelay (1000); mtsdr(SDR0_SRST1, 0x00000000); udelay (1000); mtsdr(SDR0_SRST0, 0x00000000); printf("USB: Device(int phy)\n"); } #endif /* CONFIG_440EPX */ mfsdr(SDR0_SRST1, reg); /* enable security/kasumi engines */ reg &= ~(SDR0_SRST1_CRYP0 | SDR0_SRST1_KASU0); mtsdr(SDR0_SRST1, reg); /* * Clear PLB4A0_ACR[WRP] * This fix will make the MAL burst disabling patch for the Linux * EMAC driver obsolete. */ reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP; mtdcr(plb4_acr, reg); return 0; } int checkboard(void) { char *s = getenv("serial#"); u8 rev; u8 val; #ifdef CONFIG_440EPX printf("Board: Sequoia - AMCC PPC440EPx Evaluation Board"); #else printf("Board: Rainier - AMCC PPC440GRx Evaluation Board"); #endif rev = in8(CFG_BCSR_BASE + 0); val = in8(CFG_BCSR_BASE + 5) & 0x01; printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33); if (s != NULL) { puts(", serial# "); puts(s); } putc('\n'); return (0); } #if defined(CFG_DRAM_TEST) int testdram(void) { unsigned long *mem = (unsigned long *)0; const unsigned long kend = (1024 / sizeof(unsigned long)); unsigned long k, n; mtmsr(0); for (k = 0; k < CFG_MBYTES_SDRAM; ++k, mem += (1024 / sizeof(unsigned long))) { if ((k & 1023) == 0) { printf("%3d MB\r", k / 1024); } memset(mem, 0xaaaaaaaa, 1024); for (n = 0; n < kend; ++n) { if (mem[n] != 0xaaaaaaaa) { printf("SDRAM test fails at: %08x\n", (uint) & mem[n]); return 1; } } memset(mem, 0x55555555, 1024); for (n = 0; n < kend; ++n) { if (mem[n] != 0x55555555) { printf("SDRAM test fails at: %08x\n", (uint) & mem[n]); return 1; } } } printf("SDRAM test passes\n"); return 0; } #endif /************************************************************************* * pci_pre_init * * This routine is called just prior to registering the hose and gives * the board the opportunity to check things. Returning a value of zero * indicates that things are bad & PCI initialization should be aborted. * * Different boards may wish to customize the pci controller structure * (add regions, override default access routines, etc) or perform * certain pre-initialization actions. * ************************************************************************/ #if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller *hose) { unsigned long addr; /*-------------------------------------------------------------------------+ | Set priority for all PLB3 devices to 0. | Set PLB3 arbiter to fair mode. +-------------------------------------------------------------------------*/ mfsdr(sdr_amp1, addr); mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00); addr = mfdcr(plb3_acr); mtdcr(plb3_acr, addr | 0x80000000); /*-------------------------------------------------------------------------+ | Set priority for all PLB4 devices to 0. +-------------------------------------------------------------------------*/ mfsdr(sdr_amp0, addr); mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00); addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */ mtdcr(plb4_acr, addr); /*-------------------------------------------------------------------------+ | Set Nebula PLB4 arbiter to fair mode. +-------------------------------------------------------------------------*/ /* Segment0 */ addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair; addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled; addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep; addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep; mtdcr(plb0_acr, addr); /* Segment1 */ addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair; addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled; addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep; addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep; mtdcr(plb1_acr, addr); return 1; } #endif /* defined(CONFIG_PCI) */ /************************************************************************* * pci_target_init * * The bootstrap configuration provides default settings for the pci * inbound map (PIM). But the bootstrap config choices are limited and * may not be sufficient for a given board. * ************************************************************************/ #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller *hose) { /*--------------------------------------------------------------------------+ * Set up Direct MMIO registers *--------------------------------------------------------------------------*/ /*--------------------------------------------------------------------------+ | PowerPC440EPX PCI Master configuration. | Map one 1Gig range of PLB/processor addresses to PCI memory space. | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF | Use byte reversed out routines to handle endianess. | Make this region non-prefetchable. +--------------------------------------------------------------------------*/ out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */ out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */ out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */ out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */ out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */ out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */ out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */ out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */ out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */ /*--------------------------------------------------------------------------+ * Set up Configuration registers *--------------------------------------------------------------------------*/ /* Program the board's subsystem id/vendor id */ pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, CFG_PCI_SUBSYS_VENDORID); pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID); /* Configure command register as bus master */ pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); /* 240nS PCI clock */ pci_write_config_word(0, PCI_LATENCY_TIMER, 1); /* No error reporting */ pci_write_config_word(0, PCI_ERREN, 0); pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); } #endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ /************************************************************************* * pci_master_init * ************************************************************************/ #if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) void pci_master_init(struct pci_controller *hose) { unsigned short temp_short; /*--------------------------------------------------------------------------+ | Write the PowerPC440 EP PCI Configuration regs. | Enable PowerPC440 EP to be a master on the PCI bus (PMM). | Enable PowerPC440 EP to act as a PCI memory target (PTM). +--------------------------------------------------------------------------*/ pci_read_config_word(0, PCI_COMMAND, &temp_short); pci_write_config_word(0, PCI_COMMAND, temp_short | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); } #endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */ /************************************************************************* * is_pci_host * * This routine is called to determine if a pci scan should be * performed. With various hardware environments (especially cPCI and * PPMC) it's insufficient to depend on the state of the arbiter enable * bit in the strap register, or generic host/adapter assumptions. * * Rather than hard-code a bad assumption in the general 440 code, the * 440 pci code requires the board to decide at runtime. * * Return 0 for adapter mode, non-zero for host (monarch) mode. * * ************************************************************************/ #if defined(CONFIG_PCI) int is_pci_host(struct pci_controller *hose) { /* Cactus is always configured as host. */ return (1); } #endif /* defined(CONFIG_PCI) */