/* * (C) Copyright 2007 * Michael Schwingen, michael@schwingen.org * * (C) Copyright 2006 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * (C) Copyright 2002 * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net * * (C) Copyright 2002 * Sysgo Real-Time Solutions, GmbH <www.elinos.com> * Marius Groeger <mgroeger@sysgo.de> * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include <common.h> #include <command.h> #include <malloc.h> #include <asm/arch/ixp425.h> #include <asm/io.h> #include <miiphy.h> #include "actux3_hw.h" DECLARE_GLOBAL_DATA_PTR; int board_init (void) { gd->bd->bi_arch_number = MACH_TYPE_ACTUX3; /* adress of boot parameters */ gd->bd->bi_boot_params = 0x00000100; GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_IORST); GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_ETHRST); GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_DSR); GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_DCD); GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED5_GN); GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED6_RT); GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED6_GN); GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_IORST); GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_ETHRST); GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_DSR); GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_DCD); GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_LED5_GN); GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_LED6_RT); GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_LED6_GN); /* * Setup GPIO's for Interrupt inputs */ GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_DBGINT); GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_ETHINT); /* * Setup GPIO's for 33MHz clock output */ GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_PCI_CLK); GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_EXTBUS_CLK); *IXP425_GPIO_GPCLKR = 0x011001FF; /* CS1: IPAC-X */ *IXP425_EXP_CS1 = 0x94d10013; /* CS5: Debug port */ *IXP425_EXP_CS5 = 0x9d520003; /* CS6: Release/Option register */ *IXP425_EXP_CS6 = 0x81860001; /* CS7: LEDs */ *IXP425_EXP_CS7 = 0x80900003; udelay (533); GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST); GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_ETHRST); ACTUX3_LED1_RT (1); ACTUX3_LED1_GN (0); ACTUX3_LED2_RT (0); ACTUX3_LED2_GN (0); ACTUX3_LED3_RT (0); ACTUX3_LED3_GN (0); ACTUX3_LED4_GN (0); ACTUX3_LED5_RT (0); return 0; } /* * Check Board Identity */ int checkboard (void) { char *s = getenv ("serial#"); puts ("Board: AcTux-3 rev."); putc (ACTUX3_BOARDREL + 'A' - 1); if (s != NULL) { puts (", serial# "); puts (s); } putc ('\n'); return (0); } /************************************************************************* * get_board_rev() - setup to pass kernel board revision information * 0 = reserved * 1 = Rev. A * 2 = Rev. B *************************************************************************/ u32 get_board_rev (void) { return ACTUX3_BOARDREL; } int dram_init (void) { gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; return (0); } void reset_phy (void) { int i; /* initialize the PHY */ miiphy_reset ("NPE0", CONFIG_PHY_ADDR); /* all LED outputs = Link/Act */ miiphy_write ("NPE0", CONFIG_PHY_ADDR, 0x16, 0x0AAA); /* * The Marvell 88E6060 switch comes up with all ports disabled. * set all ethernet switch ports to forwarding state */ for (i = 1; i <= 5; i++) miiphy_write ("NPE0", CONFIG_PHY_ADDR + 8 + i, 0x04, 0x03); }