/* * Based on Linux i.MX iomux-v3.h file: * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, * * * Copyright (C) 2011 Freescale Semiconductor, Inc. * * SPDX-License-Identifier: GPL-2.0+ */ #ifndef __MACH_IOMUX_V3_H__ #define __MACH_IOMUX_V3_H__ #include /* * build IOMUX_PAD structure * * This iomux scheme is based around pads, which are the physical balls * on the processor. * * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls * things like driving strength and pullup/pulldown. * - Each pad can have but not necessarily does have an output routing register * (IOMUXC_SW_MUX_CTL_PAD_x). * - Each pad can have but not necessarily does have an input routing register * (IOMUXC_x_SELECT_INPUT) * * The three register sets do not have a fixed offset to each other, * hence we order this table by pad control registers (which all pads * have) and put the optional i/o routing registers into additional * fields. * * The naming convention for the pad modes is SOC_PAD___ * If or refers to a GPIO, it is named GPIO__ * * IOMUX/PAD Bit field definitions * * MUX_CTRL_OFS: 0..11 (12) * PAD_CTRL_OFS: 12..23 (12) * SEL_INPUT_OFS: 24..35 (12) * MUX_MODE + SION: 36..40 (5) * PAD_CTRL + NO_PAD_CTRL: 41..58 (18) * SEL_INP: 59..62 (4) * reserved: 63 (1) */ typedef u64 iomux_v3_cfg_t; #define MUX_CTRL_OFS_SHIFT 0 #define MUX_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << MUX_CTRL_OFS_SHIFT) #define MUX_PAD_CTRL_OFS_SHIFT 12 #define MUX_PAD_CTRL_OFS_MASK ((iomux_v3_cfg_t)0xfff << \ MUX_PAD_CTRL_OFS_SHIFT) #define MUX_SEL_INPUT_OFS_SHIFT 24 #define MUX_SEL_INPUT_OFS_MASK ((iomux_v3_cfg_t)0xfff << \ MUX_SEL_INPUT_OFS_SHIFT) #define MUX_MODE_SHIFT 36 #define MUX_MODE_MASK ((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT) #define MUX_PAD_CTRL_SHIFT 41 #define MUX_PAD_CTRL_MASK ((iomux_v3_cfg_t)0x3ffff << MUX_PAD_CTRL_SHIFT) #define MUX_SEL_INPUT_SHIFT 59 #define MUX_SEL_INPUT_MASK ((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT) #define MUX_MODE_SION ((iomux_v3_cfg_t)IOMUX_CONFIG_SION << \ MUX_MODE_SHIFT) #define MUX_PAD_CTRL(x) ((iomux_v3_cfg_t)(x) << MUX_PAD_CTRL_SHIFT) #define IOMUX_PAD(pad_ctrl_ofs, mux_ctrl_ofs, mux_mode, sel_input_ofs, \ sel_input, pad_ctrl) \ (((iomux_v3_cfg_t)(mux_ctrl_ofs) << MUX_CTRL_OFS_SHIFT) | \ ((iomux_v3_cfg_t)(mux_mode) << MUX_MODE_SHIFT) | \ ((iomux_v3_cfg_t)(pad_ctrl_ofs) << MUX_PAD_CTRL_OFS_SHIFT) | \ ((iomux_v3_cfg_t)(pad_ctrl) << MUX_PAD_CTRL_SHIFT) | \ ((iomux_v3_cfg_t)(sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT)| \ ((iomux_v3_cfg_t)(sel_input) << MUX_SEL_INPUT_SHIFT)) #define NEW_PAD_CTRL(cfg, pad) (((cfg) & ~MUX_PAD_CTRL_MASK) | \ MUX_PAD_CTRL(pad)) #define __NA_ 0x000 #define NO_MUX_I 0 #define NO_PAD_I 0 #define NO_PAD_CTRL (1 << 17) #ifdef CONFIG_MX6 #define PAD_CTL_HYS (1 << 16) #define PAD_CTL_PUS_100K_DOWN (0 << 14 | PAD_CTL_PUE) #define PAD_CTL_PUS_47K_UP (1 << 14 | PAD_CTL_PUE) #define PAD_CTL_PUS_100K_UP (2 << 14 | PAD_CTL_PUE) #define PAD_CTL_PUS_22K_UP (3 << 14 | PAD_CTL_PUE) #define PAD_CTL_PUE (1 << 13 | PAD_CTL_PKE) #define PAD_CTL_PKE (1 << 12) #define PAD_CTL_ODE (1 << 11) #define PAD_CTL_SPEED_LOW (1 << 6) #define PAD_CTL_SPEED_MED (2 << 6) #define PAD_CTL_SPEED_HIGH (3 << 6) #define PAD_CTL_DSE_DISABLE (0 << 3) #define PAD_CTL_DSE_240ohm (1 << 3) #define PAD_CTL_DSE_120ohm (2 << 3) #define PAD_CTL_DSE_80ohm (3 << 3) #define PAD_CTL_DSE_60ohm (4 << 3) #define PAD_CTL_DSE_48ohm (5 << 3) #define PAD_CTL_DSE_40ohm (6 << 3) #define PAD_CTL_DSE_34ohm (7 << 3) #elif defined(CONFIG_VF610) #define PAD_MUX_MODE_SHIFT 20 #define PAD_CTL_SPEED_MED (1 << 12) #define PAD_CTL_SPEED_HIGH (3 << 12) #define PAD_CTL_DSE_50ohm (3 << 6) #define PAD_CTL_DSE_25ohm (6 << 6) #define PAD_CTL_DSE_20ohm (7 << 6) #define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE) #define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE) #define PAD_CTL_PKE (1 << 3) #define PAD_CTL_PUE (1 << 2 | PAD_CTL_PKE) #define PAD_CTL_OBE_IBE_ENABLE (3 << 0) #else #define PAD_CTL_DVS (1 << 13) #define PAD_CTL_INPUT_DDR (1 << 9) #define PAD_CTL_HYS (1 << 8) #define PAD_CTL_PKE (1 << 7) #define PAD_CTL_PUE (1 << 6 | PAD_CTL_PKE) #define PAD_CTL_PUS_100K_DOWN (0 << 4 | PAD_CTL_PUE) #define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE) #define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE) #define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE) #define PAD_CTL_ODE (1 << 3) #define PAD_CTL_DSE_LOW (0 << 1) #define PAD_CTL_DSE_MED (1 << 1) #define PAD_CTL_DSE_HIGH (2 << 1) #define PAD_CTL_DSE_MAX (3 << 1) #endif #define PAD_CTL_SRE_SLOW (0 << 0) #define PAD_CTL_SRE_FAST (1 << 0) #define IOMUX_CONFIG_SION 0x10 #define GPIO_PIN_MASK 0x1f #define GPIO_PORT_SHIFT 5 #define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) #define GPIO_PORTA (0 << GPIO_PORT_SHIFT) #define GPIO_PORTB (1 << GPIO_PORT_SHIFT) #define GPIO_PORTC (2 << GPIO_PORT_SHIFT) #define GPIO_PORTD (3 << GPIO_PORT_SHIFT) #define GPIO_PORTE (4 << GPIO_PORT_SHIFT) #define GPIO_PORTF (5 << GPIO_PORT_SHIFT) void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad); void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list, unsigned count); /* * Set bits for general purpose registers */ void mxc_iomux_set_gpr_register(int group, int start_bit, int num_bits, int value); #endif /* __MACH_IOMUX_V3_H__*/