# # (C) Copyright 2000-2005 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this # project. # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of # the License, or (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # HOSTARCH := $(shell uname -m | \ sed -e s/i.86/i386/ \ -e s/sun4u/sparc64/ \ -e s/arm.*/arm/ \ -e s/sa110/arm/ \ -e s/powerpc/ppc/ \ -e s/macppc/ppc/) HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ sed -e 's/\(cygwin\).*/cygwin/') export HOSTARCH HOSTOS # Deal with colliding definitions from tcsh etc. VENDOR= ######################################################################### TOPDIR := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi) export TOPDIR ifeq (include/config.mk,$(wildcard include/config.mk)) # load ARCH, BOARD, and CPU configuration include include/config.mk export ARCH CPU BOARD VENDOR SOC # load other configuration include $(TOPDIR)/config.mk ifndef CROSS_COMPILE ifeq ($(HOSTARCH),ppc) CROSS_COMPILE = else ifeq ($(ARCH),ppc) CROSS_COMPILE = powerpc-linux- endif ifeq ($(ARCH),arm) CROSS_COMPILE = arm-linux- endif ifeq ($(ARCH),i386) ifeq ($(HOSTARCH),i386) CROSS_COMPILE = else CROSS_COMPILE = i386-linux- endif endif ifeq ($(ARCH),mips) CROSS_COMPILE = mips_4KC- endif ifeq ($(ARCH),nios) CROSS_COMPILE = nios-elf- endif ifeq ($(ARCH),nios2) CROSS_COMPILE = nios2-elf- endif ifeq ($(ARCH),m68k) CROSS_COMPILE = m68k-elf- endif ifeq ($(ARCH),microblaze) CROSS_COMPILE = mb- endif endif endif export CROSS_COMPILE ######################################################################### # U-Boot objects....order is important (i.e. start must be first) OBJS = cpu/$(CPU)/start.o ifeq ($(CPU),i386) OBJS += cpu/$(CPU)/start16.o OBJS += cpu/$(CPU)/reset.o endif ifeq ($(CPU),ppc4xx) OBJS += cpu/$(CPU)/resetvec.o endif ifeq ($(CPU),mpc83xx) OBJS += cpu/$(CPU)/resetvec.o endif ifeq ($(CPU),mpc85xx) OBJS += cpu/$(CPU)/resetvec.o endif LIBS = lib_generic/libgeneric.a LIBS += board/$(BOARDDIR)/lib$(BOARD).a LIBS += cpu/$(CPU)/lib$(CPU).a ifdef SOC LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a endif LIBS += lib_$(ARCH)/lib$(ARCH).a LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \ fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a LIBS += net/libnet.a LIBS += disk/libdisk.a LIBS += rtc/librtc.a LIBS += dtt/libdtt.a LIBS += drivers/libdrivers.a LIBS += drivers/sk98lin/libsk98lin.a LIBS += post/libpost.a post/cpu/libcpu.a LIBS += common/libcommon.a .PHONY : $(LIBS) # Add GCC lib PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc # The "tools" are needed early, so put this first # Don't include stuff already done in $(LIBS) SUBDIRS = tools \ examples \ post \ post/cpu .PHONY : $(SUBDIRS) ######################################################################### ######################################################################### ALL = u-boot.srec u-boot.bin System.map all: $(ALL) u-boot.hex: u-boot $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ u-boot.srec: u-boot $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ u-boot.bin: u-boot $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ u-boot.img: u-boot.bin ./tools/mkimage -A $(ARCH) -T firmware -C none \ -a $(TEXT_BASE) -e 0 \ -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' include/version.h | \ sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ -d $< $@ u-boot.dis: u-boot $(OBJDUMP) -d $< > $@ u-boot: depend $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT) UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ $(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \ --start-group $(LIBS) --end-group $(PLATFORM_LIBS) \ -Map u-boot.map -o u-boot $(LIBS): $(MAKE) -C `dirname $@` $(SUBDIRS): $(MAKE) -C $@ all gdbtools: $(MAKE) -C tools/gdb || exit 1 depend dep: @for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir .depend ; done tags: ctags -w `find $(SUBDIRS) include \ lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \ fs/cramfs fs/fat fs/fdos fs/jffs2 \ net disk rtc dtt drivers drivers/sk98lin common \ \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)` etags: etags -a `find $(SUBDIRS) include \ lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \ fs/cramfs fs/fat fs/fdos fs/jffs2 \ net disk rtc dtt drivers drivers/sk98lin common \ \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)` System.map: u-boot @$(NM) $< | \ grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ sort > System.map ######################################################################### else all install u-boot u-boot.srec depend dep: @echo "System not configured - see README" >&2 @ exit 1 endif ######################################################################### unconfig: @rm -f include/config.h include/config.mk board/*/config.tmp #======================================================================== # PowerPC #======================================================================== ######################################################################### ## MPC5xx Systems ######################################################################### canmb_config: unconfig @./mkconfig -a canmb ppc mpc5xxx canmb cmi_mpc5xx_config: unconfig @./mkconfig $(@:_config=) ppc mpc5xx cmi PATI_config: unconfig @./mkconfig $(@:_config=) ppc mpc5xx pati mpl ######################################################################### ## MPC5xxx Systems ######################################################################### aev_config: unconfig @./mkconfig -a aev ppc mpc5xxx tqm5200 cpci5200_config: unconfig @./mkconfig -a cpci5200 ppc mpc5xxx cpci5200 esd hmi1001_config: unconfig @./mkconfig hmi1001 ppc mpc5xxx hmi1001 Lite5200_config \ Lite5200_LOWBOOT_config \ Lite5200_LOWBOOT08_config \ icecube_5200_config \ icecube_5200_LOWBOOT_config \ icecube_5200_LOWBOOT08_config \ icecube_5200_DDR_config \ icecube_5200_DDR_LOWBOOT_config \ icecube_5200_DDR_LOWBOOT08_config \ icecube_5100_config: unconfig @ >include/config.h @[ -z "$(findstring LOWBOOT_,$@)" ] || \ { if [ "$(findstring DDR,$@)" ] ; \ then echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \ else echo "TEXT_BASE = 0xFF000000" >board/icecube/config.tmp ; \ fi ; \ echo "... with LOWBOOT configuration" ; \ } @[ -z "$(findstring LOWBOOT08,$@)" ] || \ { echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \ echo "... with 8 MB flash only" ; \ echo "... with LOWBOOT configuration" ; \ } @[ -z "$(findstring DDR,$@)" ] || \ { echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \ echo "... DDR memory revision" ; \ } @[ -z "$(findstring 5200,$@)" ] || \ { echo "#define CONFIG_MPC5200" >>include/config.h ; \ echo "... with MPC5200 processor" ; \ } @[ -z "$(findstring 5100,$@)" ] || \ { echo "#define CONFIG_MGT5100" >>include/config.h ; \ echo "... with MGT5100 processor" ; \ } @./mkconfig -a IceCube ppc mpc5xxx icecube inka4x0_config: unconfig @./mkconfig inka4x0 ppc mpc5xxx inka4x0 o2dnt_config: @./mkconfig -a o2dnt ppc mpc5xxx o2dnt pf5200_config: unconfig @./mkconfig -a pf5200 ppc mpc5xxx pf5200 esd PM520_config \ PM520_DDR_config \ PM520_ROMBOOT_config \ PM520_ROMBOOT_DDR_config: unconfig @ >include/config.h @[ -z "$(findstring DDR,$@)" ] || \ { echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \ echo "... DDR memory revision" ; \ } @[ -z "$(findstring ROMBOOT,$@)" ] || \ { echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \ echo "... booting from 8-bit flash" ; \ } @./mkconfig -a PM520 ppc mpc5xxx pm520 MINI5200_config \ EVAL5200_config \ TOP5200_config: unconfig @ echo "#define CONFIG_$(@:_config=) 1" >include/config.h @./mkconfig -a TOP5200 ppc mpc5xxx top5200 emk Total5100_config \ Total5200_config \ Total5200_lowboot_config \ Total5200_Rev2_config \ Total5200_Rev2_lowboot_config: unconfig @ >include/config.h @[ -z "$(findstring 5100,$@)" ] || \ { echo "#define CONFIG_MGT5100" >>include/config.h ; \ echo "... with MGT5100 processor" ; \ } @[ -z "$(findstring 5200,$@)" ] || \ { echo "#define CONFIG_MPC5200" >>include/config.h ; \ echo "... with MPC5200 processor" ; \ } @[ -n "$(findstring Rev,$@)" ] || \ { echo "#define CONFIG_TOTAL5200_REV 1" >>include/config.h ; \ echo "... revision 1 board" ; \ } @[ -z "$(findstring Rev2_,$@)" ] || \ { echo "#define CONFIG_TOTAL5200_REV 2" >>include/config.h ; \ echo "... revision 2 board" ; \ } @[ -z "$(findstring lowboot_,$@)" ] || \ { echo "TEXT_BASE = 0xFE000000" >board/total5200/config.tmp ; \ echo "... with lowboot configuration" ; \ } @./mkconfig -a Total5200 ppc mpc5xxx total5200 TQM5200_auto_config \ TQM5200_AA_config \ TQM5200_AB_config \ TQM5200_AC_config \ MiniFAP_config: unconfig @ >include/config.h @[ -z "$(findstring MiniFAP,$@)" ] || \ { echo "#define CONFIG_MINIFAP" >>include/config.h ; \ echo "#define CONFIG_TQM5200_AC" >>include/config.h ; \ echo "... TQM5200_AC on MiniFAP" ; \ } @[ -z "$(findstring AA,$@)" ] || \ { echo "#define CONFIG_TQM5200_AA" >>include/config.h ; \ echo "... with 4 MB Flash, 16 MB SDRAM, 32 kB EEPROM" ; \ } @[ -z "$(findstring AB,$@)" ] || \ { echo "#define CONFIG_TQM5200_AB" >>include/config.h ; \ echo "... with 64 MB Flash, 64 MB SDRAM, 32 kB EEPROM, 512 kB SRAM" ; \ echo "... with Graphics Controller"; \ } @[ -z "$(findstring AC,$@)" ] || \ { echo "#define CONFIG_TQM5200_AC" >>include/config.h ; \ echo "... with 4 MB Flash, 128 MB SDRAM" ; \ echo "... with Graphics Controller"; \ } @[ -z "$(findstring auto,$@)" ] || \ { echo "#define CONFIG_CS_AUTOCONF" >>include/config.h ; \ echo "... with automatic CS configuration" ; \ } @./mkconfig -a TQM5200 ppc mpc5xxx tqm5200 spieval_config: unconfig echo "#define CONFIG_CS_AUTOCONF">>include/config.h echo "... with automatic CS configuration" @./mkconfig -a spieval ppc mpc5xxx tqm5200 ######################################################################### ## MPC8xx Systems ######################################################################### Adder_config \ Adder87x_config \ AdderII_config \ : unconfig $(if $(findstring AdderII,$@), \ @echo "#define CONFIG_MPC852T" > include/config.h) @./mkconfig -a Adder ppc mpc8xx adder ADS860_config \ FADS823_config \ FADS850SAR_config \ MPC86xADS_config \ MPC885ADS_config \ FADS860T_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx fads AMX860_config : unconfig @./mkconfig $(@:_config=) ppc mpc8xx amx860 westel c2mon_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx c2mon CCM_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx CCM siemens cogent_mpc8xx_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx cogent ELPT860_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx elpt860 LEOX ESTEEM192E_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx esteem192e ETX094_config : unconfig @./mkconfig $(@:_config=) ppc mpc8xx etx094 FLAGADM_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx flagadm xtract_GEN860T = $(subst _SC,,$(subst _config,,$1)) GEN860T_SC_config \ GEN860T_config: unconfig @ >include/config.h @[ -z "$(findstring _SC,$@)" ] || \ { echo "#define CONFIG_SC" >>include/config.h ; \ echo "With reduced H/W feature set (SC)..." ; \ } @./mkconfig -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t GENIETV_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx genietv GTH_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx gth hermes_config : unconfig @./mkconfig $(@:_config=) ppc mpc8xx hermes HMI10_config : unconfig @./mkconfig $(@:_config=) ppc mpc8xx tqm8xx IAD210_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx IAD210 siemens xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1)) ICU862_100MHz_config \ ICU862_config: unconfig @ >include/config.h @[ -z "$(findstring _100MHz,$@)" ] || \ { echo "#define CONFIG_100MHz" >>include/config.h ; \ echo "... with 100MHz system clock" ; \ } @./mkconfig -a $(call xtract_ICU862,$@) ppc mpc8xx icu862 IP860_config : unconfig @./mkconfig $(@:_config=) ppc mpc8xx ip860 IVML24_256_config \ IVML24_128_config \ IVML24_config: unconfig @ >include/config.h @[ -z "$(findstring IVML24_config,$@)" ] || \ { echo "#define CONFIG_IVML24_16M" >>include/config.h ; \ } @[ -z "$(findstring IVML24_128_config,$@)" ] || \ { echo "#define CONFIG_IVML24_32M" >>include/config.h ; \ } @[ -z "$(findstring IVML24_256_config,$@)" ] || \ { echo "#define CONFIG_IVML24_64M" >>include/config.h ; \ } @./mkconfig -a IVML24 ppc mpc8xx ivm IVMS8_256_config \ IVMS8_128_config \ IVMS8_config: unconfig @ >include/config.h @[ -z "$(findstring IVMS8_config,$@)" ] || \ { echo "#define CONFIG_IVMS8_16M" >>include/config.h ; \ } @[ -z "$(findstring IVMS8_128_config,$@)" ] || \ { echo "#define CONFIG_IVMS8_32M" >>include/config.h ; \ } @[ -z "$(findstring IVMS8_256_config,$@)" ] || \ { echo "#define CONFIG_IVMS8_64M" >>include/config.h ; \ } @./mkconfig -a IVMS8 ppc mpc8xx ivm KUP4K_config : unconfig @./mkconfig $(@:_config=) ppc mpc8xx kup4k kup KUP4X_config : unconfig @./mkconfig $(@:_config=) ppc mpc8xx kup4x kup LANTEC_config : unconfig @./mkconfig $(@:_config=) ppc mpc8xx lantec lwmon_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx lwmon MBX_config \ MBX860T_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx mbx8xx MHPC_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx mhpc eltec MVS1_config : unconfig @./mkconfig $(@:_config=) ppc mpc8xx mvs1 xtract_NETVIA = $(subst _V2,,$(subst _config,,$1)) NETVIA_V2_config \ NETVIA_config: unconfig @ >include/config.h @[ -z "$(findstring NETVIA_config,$@)" ] || \ { echo "#define CONFIG_NETVIA_VERSION 1" >>include/config.h ; \ echo "... Version 1" ; \ } @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \ { echo "#define CONFIG_NETVIA_VERSION 2" >>include/config.h ; \ echo "... Version 2" ; \ } @./mkconfig -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1)) NETPHONE_V2_config \ NETPHONE_config: unconfig @ >include/config.h @[ -z "$(findstring NETPHONE_config,$@)" ] || \ { echo "#define CONFIG_NETPHONE_VERSION 1" >>include/config.h ; \ } @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \ { echo "#define CONFIG_NETPHONE_VERSION 2" >>include/config.h ; \ } @./mkconfig -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1)))) NETTA_ISDN_6412_SWAPHOOK_config \ NETTA_ISDN_SWAPHOOK_config \ NETTA_6412_SWAPHOOK_config \ NETTA_SWAPHOOK_config \ NETTA_ISDN_6412_config \ NETTA_ISDN_config \ NETTA_6412_config \ NETTA_config: unconfig @ >include/config.h @[ -z "$(findstring ISDN_,$@)" ] || \ { echo "#define CONFIG_NETTA_ISDN 1" >>include/config.h ; \ } @[ -n "$(findstring ISDN_,$@)" ] || \ { echo "#undef CONFIG_NETTA_ISDN" >>include/config.h ; \ } @[ -z "$(findstring 6412_,$@)" ] || \ { echo "#define CONFIG_NETTA_6412 1" >>include/config.h ; \ } @[ -n "$(findstring 6412_,$@)" ] || \ { echo "#undef CONFIG_NETTA_6412" >>include/config.h ; \ } @[ -z "$(findstring SWAPHOOK_,$@)" ] || \ { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>include/config.h ; \ } @[ -n "$(findstring SWAPHOOK_,$@)" ] || \ { echo "#undef CONFIG_NETTA_SWAPHOOK" >>include/config.h ; \ } @./mkconfig -a $(call xtract_NETTA,$@) ppc mpc8xx netta xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1)) NETTA2_V2_config \ NETTA2_config: unconfig @ >include/config.h @[ -z "$(findstring NETTA2_config,$@)" ] || \ { echo "#define CONFIG_NETTA2_VERSION 1" >>include/config.h ; \ } @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \ { echo "#define CONFIG_NETTA2_VERSION 2" >>include/config.h ; \ } @./mkconfig -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2 NC650_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx nc650 NX823_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx nx823 pcu_e_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx pcu_e siemens QS850_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx qs850 snmc QS823_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx qs850 snmc QS860T_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx qs860t snmc quantum_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx quantum R360MPI_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx r360mpi RBC823_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx rbc823 RPXClassic_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx RPXClassic RPXlite_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx RPXlite RPXlite_DW_64_config \ RPXlite_DW_LCD_config \ RPXlite_DW_64_LCD_config \ RPXlite_DW_NVRAM_config \ RPXlite_DW_NVRAM_64_config \ RPXlite_DW_NVRAM_LCD_config \ RPXlite_DW_NVRAM_64_LCD_config \ RPXlite_DW_config: unconfig @ >include/config.h @[ -z "$(findstring _64,$@)" ] || \ { echo "#define RPXlite_64MHz" >>include/config.h ; \ echo "... with 64MHz system clock ..."; \ } @[ -z "$(findstring _LCD,$@)" ] || \ { echo "#define CONFIG_LCD" >>include/config.h ; \ echo "#define CONFIG_NEC_NL6448BC20" >>include/config.h ; \ echo "... with LCD display ..."; \ } @[ -z "$(findstring _NVRAM,$@)" ] || \ { echo "#define CFG_ENV_IS_IN_NVRAM" >>include/config.h ; \ echo "... with ENV in NVRAM ..."; \ } @./mkconfig -a RPXlite_DW ppc mpc8xx RPXlite_dw rmu_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx rmu RRvision_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx RRvision RRvision_LCD_config: unconfig @echo "#define CONFIG_LCD" >include/config.h @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h @./mkconfig -a RRvision ppc mpc8xx RRvision SM850_config : unconfig @./mkconfig $(@:_config=) ppc mpc8xx tqm8xx SPD823TS_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx spd8xx stxxtc_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx stxxtc svm_sc8xx_config: unconfig @ >include/config.h @./mkconfig $(@:_config=) ppc mpc8xx svm_sc8xx SXNI855T_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx sixnet # EMK MPC8xx based modules TOP860_config: unconfig @./mkconfig $(@:_config=) ppc mpc8xx top860 emk # Play some tricks for configuration selection # Only 855 and 860 boards may come with FEC # and only 823 boards may have LCD support xtract_8xx = $(subst _LCD,,$(subst _config,,$1)) FPS850L_config \ FPS860L_config \ NSCU_config \ TQM823L_config \ TQM823L_LCD_config \ TQM850L_config \ TQM855L_config \ TQM860L_config \ TQM862L_config \ TQM823M_config \ TQM850M_config \ TQM855M_config \ TQM860M_config \ TQM862M_config \ TQM866M_config: unconfig @ >include/config.h @[ -z "$(findstring _LCD,$@)" ] || \ { echo "#define CONFIG_LCD" >>include/config.h ; \ echo "#define CONFIG_NEC_NL6448BC20" >>include/config.h ; \ echo "... with LCD display" ; \ } @./mkconfig -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx TTTech_config: unconfig @echo "#define CONFIG_LCD" >include/config.h @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h @./mkconfig -a TQM823L ppc mpc8xx tqm8xx uc100_config : unconfig @./mkconfig $(@:_config=) ppc mpc8xx uc100 v37_config: unconfig @echo "#define CONFIG_LCD" >include/config.h @echo "#define CONFIG_SHARP_LQ084V1DG21" >>include/config.h @./mkconfig $(@:_config=) ppc mpc8xx v37 wtk_config: unconfig @echo "#define CONFIG_LCD" >include/config.h @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>include/config.h @./mkconfig -a TQM823L ppc mpc8xx tqm8xx ######################################################################### ## PPC4xx Systems ######################################################################### xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1)))))) ADCIOP_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx adciop esd APC405_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx apc405 esd AR405_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx ar405 esd ASH405_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx ash405 esd bamboo_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx bamboo amcc bubinga_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx bubinga amcc CANBT_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx canbt esd CATcenter_config \ CATcenter_25_config \ CATcenter_33_config: unconfig @ echo "/* CATcenter uses PPChameleon Model ME */" > include/config.h @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> include/config.h @[ -z "$(findstring _25,$@)" ] || \ { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \ echo "SysClk = 25MHz" ; \ } @[ -z "$(findstring _33,$@)" ] || \ { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \ echo "SysClk = 33MHz" ; \ } @./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave CPCI2DP_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx cpci2dp esd CPCI405_config \ CPCI4052_config \ CPCI405DT_config \ CPCI405AB_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx cpci405 esd @echo "BOARD_REVISION = $(@:_config=)" >>include/config.mk CPCI440_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx cpci440 esd CPCIISER4_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx cpciiser4 esd CRAYL1_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx L1 cray csb272_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx csb272 csb472_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx csb472 DASA_SIM_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx dasa_sim esd DP405_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx dp405 esd DU405_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx du405 esd ebony_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx ebony amcc ERIC_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx eric EXBITGEN_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx exbitgen G2000_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx g2000 HH405_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx hh405 esd HUB405_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx hub405 esd JSE_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx jse KAREF_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx karef sandburst METROBOX_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx metrobox sandburst MIP405_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx mip405 mpl MIP405T_config: unconfig @echo "#define CONFIG_MIP405T" >include/config.h @echo "Enable subset config for MIP405T" @./mkconfig -a MIP405 ppc ppc4xx mip405 mpl ML2_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx ml2 ml300_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx ml300 xilinx ocotea_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx ocotea amcc OCRTC_config \ ORSG_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx ocrtc esd PCI405_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx pci405 esd PIP405_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx pip405 mpl PLU405_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx plu405 esd PMC405_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx pmc405 esd PPChameleonEVB_config \ PPChameleonEVB_BA_25_config \ PPChameleonEVB_ME_25_config \ PPChameleonEVB_HI_25_config \ PPChameleonEVB_BA_33_config \ PPChameleonEVB_ME_33_config \ PPChameleonEVB_HI_33_config: unconfig @ >include/config.h @[ -z "$(findstring EVB_BA,$@)" ] || \ { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>include/config.h ; \ echo "... BASIC model" ; \ } @[ -z "$(findstring EVB_ME,$@)" ] || \ { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>include/config.h ; \ echo "... MEDIUM model" ; \ } @[ -z "$(findstring EVB_HI,$@)" ] || \ { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>include/config.h ; \ echo "... HIGH-END model" ; \ } @[ -z "$(findstring _25,$@)" ] || \ { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \ echo "SysClk = 25MHz" ; \ } @[ -z "$(findstring _33,$@)" ] || \ { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \ echo "SysClk = 33MHz" ; \ } @./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave sbc405_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx sbc405 sycamore_config: unconfig @echo "Configuring for sycamore board as subset of walnut..." @./mkconfig -a walnut ppc ppc4xx walnut amcc VOH405_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx voh405 esd VOM405_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx vom405 esd W7OLMC_config \ W7OLMG_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx w7o walnut_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx walnut amcc WUH405_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx wuh405 esd XPEDITE1K_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx xpedite1k yosemite_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx yosemite amcc yellowstone_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx yellowstone amcc ######################################################################### ## MPC8220 Systems ######################################################################### Alaska8220_config \ Yukon8220_config: unconfig @./mkconfig $(@:_config=) ppc mpc8220 alaska sorcery_config: unconfig @./mkconfig $(@:_config=) ppc mpc8220 sorcery ######################################################################### ## MPC824x Systems ######################################################################### xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))) A3000_config: unconfig @./mkconfig $(@:_config=) ppc mpc824x a3000 barco_config: unconfig @./mkconfig $(@:_config=) ppc mpc824x barco BMW_config: unconfig @./mkconfig $(@:_config=) ppc mpc824x bmw CPC45_config \ CPC45_ROMBOOT_config: unconfig @./mkconfig $(call xtract_82xx,$@) ppc mpc824x cpc45 @cd ./include ; \ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ echo "... booting from 8-bit flash" ; \ else \ echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ echo "... booting from 64-bit flash" ; \ fi; \ echo "export CONFIG_BOOT_ROM" >> config.mk; CU824_config: unconfig @./mkconfig $(@:_config=) ppc mpc824x cu824 debris_config: unconfig @./mkconfig $(@:_config=) ppc mpc824x debris etin eXalion_config: unconfig @./mkconfig $(@:_config=) ppc mpc824x eXalion HIDDEN_DRAGON_config: unconfig @./mkconfig $(@:_config=) ppc mpc824x hidden_dragon MOUSSE_config: unconfig @./mkconfig $(@:_config=) ppc mpc824x mousse MUSENKI_config: unconfig @./mkconfig $(@:_config=) ppc mpc824x musenki MVBLUE_config: unconfig @./mkconfig $(@:_config=) ppc mpc824x mvblue OXC_config: unconfig @./mkconfig $(@:_config=) ppc mpc824x oxc PN62_config: unconfig @./mkconfig $(@:_config=) ppc mpc824x pn62 Sandpoint8240_config: unconfig @./mkconfig $(@:_config=) ppc mpc824x sandpoint Sandpoint8245_config: unconfig @./mkconfig $(@:_config=) ppc mpc824x sandpoint sbc8240_config: unconfig @./mkconfig $(@:_config=) ppc mpc824x sbc8240 SL8245_config: unconfig @./mkconfig $(@:_config=) ppc mpc824x sl8245 utx8245_config: unconfig @./mkconfig $(@:_config=) ppc mpc824x utx8245 cobra5272_config : unconfig @./mkconfig $(@:_config=) m68k mcf52x2 cobra5272 ######################################################################### ## MPC8260 Systems ######################################################################### atc_config: unconfig @./mkconfig $(@:_config=) ppc mpc8260 atc cogent_mpc8260_config: unconfig @./mkconfig $(@:_config=) ppc mpc8260 cogent CPU86_config \ CPU86_ROMBOOT_config: unconfig @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu86 @cd ./include ; \ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ echo "... booting from 8-bit flash" ; \ else \ echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ echo "... booting from 64-bit flash" ; \ fi; \ echo "export CONFIG_BOOT_ROM" >> config.mk; CPU87_config \ CPU87_ROMBOOT_config: unconfig @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu87 @cd ./include ; \ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ echo "... booting from 8-bit flash" ; \ else \ echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ echo "... booting from 64-bit flash" ; \ fi; \ echo "export CONFIG_BOOT_ROM" >> config.mk; ep8248_config \ ep8248E_config : unconfig @./mkconfig ep8248 ppc mpc8260 ep8248 ep8260_config: unconfig @./mkconfig $(@:_config=) ppc mpc8260 ep8260 gw8260_config: unconfig @./mkconfig $(@:_config=) ppc mpc8260 gw8260 hymod_config: unconfig @./mkconfig $(@:_config=) ppc mpc8260 hymod IDS8247_config: unconfig @./mkconfig $(@:_config=) ppc mpc8260 ids8247 IPHASE4539_config: unconfig @./mkconfig $(@:_config=) ppc mpc8260 iphase4539 ISPAN_config \ ISPAN_REVB_config: unconfig @if [ "$(findstring _REVB_,$@)" ] ; then \ echo "#define CFG_REV_B" > include/config.h ; \ fi @./mkconfig -a ISPAN ppc mpc8260 ispan MPC8260ADS_config \ MPC8260ADS_lowboot_config \ MPC8260ADS_33MHz_config \ MPC8260ADS_33MHz_lowboot_config \ MPC8260ADS_40MHz_config \ MPC8260ADS_40MHz_lowboot_config \ MPC8272ADS_config \ MPC8272ADS_lowboot_config \ PQ2FADS_config \ PQ2FADS_lowboot_config \ PQ2FADS-VR_config \ PQ2FADS-VR_lowboot_config \ PQ2FADS-ZU_config \ PQ2FADS-ZU_lowboot_config \ PQ2FADS-ZU_66MHz_config \ PQ2FADS-ZU_66MHz_lowboot_config \ : unconfig $(if $(findstring PQ2FADS,$@), \ @echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > include/config.h, \ @echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > include/config.h) $(if $(findstring MHz,$@), \ @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> include/config.h, \ $(if $(findstring VR,$@), \ @echo "#define CONFIG_8260_CLKIN 66000000" >> include/config.h)) @[ -z "$(findstring lowboot_,$@)" ] || \ { echo "TEXT_BASE = 0xFF800000" >board/mpc8260ads/config.tmp ; \ echo "... with lowboot configuration" ; \ } @./mkconfig -a MPC8260ADS ppc mpc8260 mpc8260ads MPC8266ADS_config: unconfig @./mkconfig $(@:_config=) ppc mpc8260 mpc8266ads # PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash PM825_config \ PM825_ROMBOOT_config \ PM825_BIGFLASH_config \ PM825_ROMBOOT_BIGFLASH_config \ PM826_config \ PM826_ROMBOOT_config \ PM826_BIGFLASH_config \ PM826_ROMBOOT_BIGFLASH_config: unconfig @if [ "$(findstring PM825_,$@)" ] ; then \ echo "#define CONFIG_PCI" >include/config.h ; \ else \ >include/config.h ; \ fi @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ echo "... booting from 8-bit flash" ; \ echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \ echo "TEXT_BASE = 0xFF800000" >board/pm826/config.tmp ; \ if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ echo "... with 32 MB Flash" ; \ echo "#define CONFIG_FLASH_32MB" >>include/config.h ; \ fi; \ else \ echo "... booting from 64-bit flash" ; \ if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ echo "... with 32 MB Flash" ; \ echo "#define CONFIG_FLASH_32MB" >>include/config.h ; \ echo "TEXT_BASE = 0x40000000" >board/pm826/config.tmp ; \ else \ echo "TEXT_BASE = 0xFF000000" >board/pm826/config.tmp ; \ fi; \ fi @./mkconfig -a PM826 ppc mpc8260 pm826 PM828_config \ PM828_PCI_config \ PM828_ROMBOOT_config \ PM828_ROMBOOT_PCI_config: unconfig @if [ -z "$(findstring _PCI_,$@)" ] ; then \ echo "#define CONFIG_PCI" >>include/config.h ; \ echo "... with PCI enabled" ; \ else \ >include/config.h ; \ fi @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ echo "... booting from 8-bit flash" ; \ echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \ echo "TEXT_BASE = 0xFF800000" >board/pm826/config.tmp ; \ fi @./mkconfig -a PM828 ppc mpc8260 pm828 ppmc8260_config: unconfig @./mkconfig $(@:_config=) ppc mpc8260 ppmc8260 Rattler8248_config \ Rattler_config: unconfig $(if $(findstring 8248,$@), \ @echo "#define CONFIG_MPC8248" > include/config.h) @./mkconfig -a Rattler ppc mpc8260 rattler RPXsuper_config: unconfig @./mkconfig $(@:_config=) ppc mpc8260 rpxsuper rsdproto_config: unconfig @./mkconfig $(@:_config=) ppc mpc8260 rsdproto sacsng_config: unconfig @./mkconfig $(@:_config=) ppc mpc8260 sacsng sbc8260_config: unconfig @./mkconfig $(@:_config=) ppc mpc8260 sbc8260 SCM_config: unconfig @./mkconfig $(@:_config=) ppc mpc8260 SCM siemens TQM8255_AA_config \ TQM8260_AA_config \ TQM8260_AB_config \ TQM8260_AC_config \ TQM8260_AD_config \ TQM8260_AE_config \ TQM8260_AF_config \ TQM8260_AG_config \ TQM8260_AH_config \ TQM8265_AA_config: unconfig @case "$@" in \ TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \ TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \ TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no; BMODE=8260;; \ TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=8260;; \ TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;; \ TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \ esac; \ >include/config.h ; \ if [ "$${CTYPE}" != "MPC8260" ] ; then \ echo "#define CONFIG_$${CTYPE}" >>include/config.h ; \ fi; \ echo "#define CONFIG_$${CFREQ}MHz" >>include/config.h ; \ echo "... with $${CFREQ}MHz system clock" ; \ if [ "$${CACHE}" == "yes" ] ; then \ echo "#define CONFIG_L2_CACHE" >>include/config.h ; \ echo "... with L2 Cache support" ; \ else \ echo "#undef CONFIG_L2_CACHE" >>include/config.h ; \ echo "... without L2 Cache support" ; \ fi; \ if [ "$${BMODE}" == "60x" ] ; then \ echo "#define CONFIG_BUSMODE_60x" >>include/config.h ; \ echo "... with 60x Bus Mode" ; \ else \ echo "#undef CONFIG_BUSMODE_60x" >>include/config.h ; \ echo "... without 60x Bus Mode" ; \ fi @./mkconfig -a TQM8260 ppc mpc8260 tqm8260 VoVPN-GW_66MHz_config \ VoVPN-GW_100MHz_config: unconfig @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > include/config.h @./mkconfig -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk ZPC1900_config: unconfig @./mkconfig $(@:_config=) ppc mpc8260 zpc1900 #======================================================================== # M68K #======================================================================== ######################################################################### ## Coldfire ######################################################################### M5272C3_config : unconfig @./mkconfig $(@:_config=) m68k mcf52x2 m5272c3 M5282EVB_config : unconfig @./mkconfig $(@:_config=) m68k mcf52x2 m5282evb TASREG_config : unconfig @./mkconfig $(@:_config=) m68k mcf52x2 tasreg esd ######################################################################### ## MPC83xx Systems ######################################################################### MPC8349ADS_config: unconfig @./mkconfig $(@:_config=) ppc mpc83xx mpc8349ads ######################################################################### ## MPC85xx Systems ######################################################################### MPC8540ADS_config: unconfig @./mkconfig $(@:_config=) ppc mpc85xx mpc8540ads MPC8540EVAL_config \ MPC8540EVAL_33_config \ MPC8540EVAL_66_config \ MPC8540EVAL_33_slave_config \ MPC8540EVAL_66_slave_config: unconfig @echo "" >include/config.h ; \ if [ "$(findstring _33_,$@)" ] ; then \ echo -n "... 33 MHz PCI" ; \ else \ echo "#define CONFIG_SYSCLK_66M" >>include/config.h ; \ echo -n "... 66 MHz PCI" ; \ fi ; \ if [ "$(findstring _slave_,$@)" ] ; then \ echo "#define CONFIG_PCI_SLAVE" >>include/config.h ; \ echo " slave" ; \ else \ echo " host" ; \ fi @./mkconfig -a MPC8540EVAL ppc mpc85xx mpc8540eval MPC8560ADS_config: unconfig @./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads MPC8541CDS_config: unconfig @./mkconfig $(@:_config=) ppc mpc85xx mpc8541cds cds MPC8548CDS_config: unconfig @./mkconfig $(@:_config=) ppc mpc85xx mpc8548cds cds MPC8555CDS_config: unconfig @./mkconfig $(@:_config=) ppc mpc85xx mpc8555cds cds PM854_config: unconfig @./mkconfig $(@:_config=) ppc mpc85xx pm854 PM856_config: unconfig @./mkconfig $(@:_config=) ppc mpc85xx pm856 sbc8540_config \ sbc8540_33_config \ sbc8540_66_config: unconfig @if [ "$(findstring _66_,$@)" ] ; then \ echo "#define CONFIG_PCI_66" >>include/config.h ; \ echo "... 66 MHz PCI" ; \ else \ >include/config.h ; \ echo "... 33 MHz PCI" ; \ fi @./mkconfig -a SBC8540 ppc mpc85xx sbc8560 sbc8560_config \ sbc8560_33_config \ sbc8560_66_config: unconfig @if [ "$(findstring _66_,$@)" ] ; then \ echo "#define CONFIG_PCI_66" >>include/config.h ; \ echo "... 66 MHz PCI" ; \ else \ >include/config.h ; \ echo "... 33 MHz PCI" ; \ fi @./mkconfig -a sbc8560 ppc mpc85xx sbc8560 stxgp3_config: unconfig @./mkconfig $(@:_config=) ppc mpc85xx stxgp3 TQM8540_config: unconfig @./mkconfig $(@:_config=) ppc mpc85xx tqm8540 TQM8560_config: unconfig @./mkconfig $(@:_config=) ppc mpc85xx tqm8560 ######################################################################### ## 74xx/7xx Systems ######################################################################### AmigaOneG3SE_config: unconfig @./mkconfig $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI BAB7xx_config: unconfig @./mkconfig $(@:_config=) ppc 74xx_7xx bab7xx eltec CPCI750_config: unconfig @./mkconfig CPCI750 ppc 74xx_7xx cpci750 esd DB64360_config: unconfig @./mkconfig DB64360 ppc 74xx_7xx db64360 Marvell DB64460_config: unconfig @./mkconfig DB64460 ppc 74xx_7xx db64460 Marvell ELPPC_config: unconfig @./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec EVB64260_config \ EVB64260_750CX_config: unconfig @./mkconfig EVB64260 ppc 74xx_7xx evb64260 P3G4_config: unconfig @./mkconfig $(@:_config=) ppc 74xx_7xx evb64260 PCIPPC2_config \ PCIPPC6_config: unconfig @./mkconfig $(@:_config=) ppc 74xx_7xx pcippc2 ZUMA_config: unconfig @./mkconfig $(@:_config=) ppc 74xx_7xx evb64260 #======================================================================== # ARM #======================================================================== ######################################################################### ## StrongARM Systems ######################################################################### assabet_config : unconfig @./mkconfig $(@:_config=) arm sa1100 assabet dnp1110_config : unconfig @./mkconfig $(@:_config=) arm sa1100 dnp1110 gcplus_config : unconfig @./mkconfig $(@:_config=) arm sa1100 gcplus lart_config : unconfig @./mkconfig $(@:_config=) arm sa1100 lart shannon_config : unconfig @./mkconfig $(@:_config=) arm sa1100 shannon ######################################################################### ## ARM92xT Systems ######################################################################### xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1)))) xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1)))) xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) at91rm9200dk_config : unconfig @./mkconfig $(@:_config=) arm arm920t at91rm9200dk NULL at91rm9200 cmc_pu2_config : unconfig @./mkconfig $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 ######################################################################## ## ARM Integrator boards ## There are two variants /AP && /CP ## - many different core modules (CMs) can be used ## - some share characteristics ## Those without specific cpu support can still use U-Boot ## provided the ARM boot monitor (or similar) runs before U-Boot ## to set up the platform e.g. map writeable memory to 0x00000000 ## setup MMU, setup caches etc. ## Ported cores are:- ## ARM926EJ-S ## ARM946E-S ## ######################################################################## xtract_int_board = $(subst _$(subst integrator$1_,,$(subst _config,,$2)),,$(subst _config,,$2)) xtract_int_cm = $(subst integrator$1_,,$(subst _config,,$2)) ######################################################################### ## Integrator/AP ######################################################################### integratorap_config : unconfig @echo -n "/* Integrator configuration implied " > tmp.fil; \ echo " by Makefile target */" >> tmp.fil; \ echo >> tmp.fil @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \ echo " /* Integrator board */" >> tmp.fil; \ echo -n "#define CONFIG_ARCH_INTEGRATOR" >> tmp.fil; \ echo " 1 /* Integrator/AP */" >> tmp.fil; \ echo "/* Core module not defined */" >> tmp.fil; \ echo -n "#define CONFIG_ARM_INTCM 1" >> tmp.fil; \ echo -n " /* Integrator core module " >> tmp.fil; \ echo "with unknown core */" >> tmp.fil; \ cpu=arm_intcm; \ mv tmp.fil ./include/config.h; \ ubootlds=board/integratorap/u-boot.lds; \ sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \ $$ubootlds > $$ubootlds.tmp; \ mv -f $$ubootlds.tmp $$ubootlds; \ ./mkconfig -a integratorap arm arm_intcm integratorap; integratorap_CM720T_config integratorap_CM7TDMI_config \ integratorap_CM920T_config integratorap_CM920T_ETM_config \ integratorap_CM922T_XA10_config integratorap_CM926EJ_S_config \ integratorap_CM940T_config integratorap_CM946E_S_config \ integratorap_CM966E_S_config integratorap_CM10200E_config \ integratorap_CM10220E_config integratorap_CM1026EJ_S_config \ integratorap_CM1136JF_S_config : unconfig @echo -n "/* Integrator configuration implied " > tmp.fil; \ echo " by Makefile target */" >> tmp.fil; \ echo >> tmp.fil @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \ echo " /* Integrator board */" >> tmp.fil; \ echo -n "#define CONFIG_ARCH_INTEGRATOR" >> tmp.fil; \ echo " 1 /* Integrator/AP */" >> tmp.fil; \ cm=$(call xtract_int_cm,ap,$@); \ echo -n "#define CONFIG_$$cm " >> tmp.fil; \ echo " /* core module */" >> tmp.fil; \ case $$cm in \ CM920T) \ echo -n "#define CONFIG_ARM920" >> tmp.fil; \ echo -n "T 1 /* CPU" >> tmp.fil; \ echo -n " core is ARM920T" >> tmp.fil; \ echo " */" >> tmp.fil; \ cpu=arm920t;; \ CM926EJ_S) echo -n "#define CONFIG_ARM926" >> tmp.fil; \ echo -n "EJ_S 1 /* CPU" >> tmp.fil; \ echo -n " core is ARM926EJ-S" >> tmp.fil; \ echo " */" >> tmp.fil; \ cpu=arm926ejs;; \ CM946E_S) echo -n "#define CONFIG_ARM946" >> tmp.fil; \ echo -n "E_S 1 /* CPU" >> tmp.fil; \ echo -n " core is ARM946E-S" >> tmp.fil; \ echo " */" >> tmp.fil; \ cpu=arm946es;; \ *) echo -n "#define CONFIG_ARM_IN" >> tmp.fil; \ echo -n "TCM 1 /* Int" >> tmp.fil; \ echo -n "egrator core module w" >> tmp.fil; \ echo -n "ith unported core" >> tmp.fil; \ echo " */" >> tmp.fil; \ cpu=arm_intcm;; \ esac; \ mv tmp.fil ./include/config.h; \ ubootlds=board/$(call xtract_int_board,ap,$@)/u-boot.lds; \ sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \ $$ubootlds > $$ubootlds.tmp; \ mv -f $$ubootlds.tmp $$ubootlds; \ ./mkconfig -a $(call xtract_int_board,ap,$@) arm $$cpu \ $(call xtract_int_board,ap,$@); ######################################################################### ## Integrator/CP ######################################################################### integratorcp_config : unconfig @echo -n "/* Integrator configuration implied " > tmp.fil; \ echo " by Makefile target */" >> tmp.fil; \ echo >> tmp.fil @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \ echo " /* Integrator board */" >> tmp.fil; \ echo -n "#define CONFIG_ARCH_CINTEGRATOR" >> tmp.fil; \ echo " 1 /* Integrator/CP */" >> tmp.fil; \ echo "/* Core module not defined */" >> tmp.fil; \ echo -n "#define CONFIG_ARM_INTCM 1" >> tmp.fil; \ echo -n " /* Integrator core module " >> tmp.fil; \ echo "with unknown core */" >> tmp.fil; \ cpu=arm_intcm; \ echo -n "#undef CONFIG_CM_MULTIPLE_SSRAM" >> tmp.fil; \ echo -n " /* CM may not have " >> tmp.fil; \ echo "multiple SSRAM mapping */" >> tmp.fil; \ echo -n "#undef CONFIG_CM_SPD_DETECT " >> tmp.fil; \ echo -n " /* CM may not support SPD " >> tmp.fil; \ echo "query */" >> tmp.fil; \ echo -n "#undef CONFIG_CM_REMAP " >> tmp.fil; \ echo -n " /* CM may not support " >> tmp.fil; \ echo "remapping */" >> tmp.fil; \ echo -n "#undef CONFIG_CM_INIT " >> tmp.fil; \ echo -n " /* CM may not have " >> tmp.fil; \ echo "initialization reg */" >> tmp.fil; \ echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil; \ echo -n " /* CM may not have TCRAM */" >> tmp.fil; \ mv tmp.fil ./include/config.h; \ ubootlds=board/integratorcp/u-boot.lds; \ sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \ $$ubootlds > $$ubootlds.tmp; \ mv -f $$ubootlds.tmp $$ubootlds; \ ./mkconfig -a integratorcp arm arm_intcm integratorcp; integratorcp_CM920T_config integratorcp_CM920T_ETM_config \ integratorcp_CM922T_XA10_config integratorcp_CM926EJ_S_config \ integratorcp_CM940T_config integratorcp_CM946E_S_config \ integratorcp_CM966E_S_config integratorcp_CM10200E_config \ integratorcp_CM10220E_config integratorcp_CM1026EJ_S_config \ integratorcp_CM1136JF_S_config : unconfig @echo -n "/* Integrator configuration implied " > tmp.fil; \ echo " by Makefile target */" >> tmp.fil; \ echo >> tmp.fil @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \ echo " /* Integrator board */" >> tmp.fil; \ echo -n "#define CONFIG_ARCH_CINTEGRATOR" >> tmp.fil; \ echo " 1 /* Integrator/CP */" >> tmp.fil; \ cm=$(call xtract_int_cm,cp,$@); \ echo -n "#define CONFIG_$$cm " >> tmp.fil; \ echo " /* core module */" >> tmp.fil; \ echo "/* $$cm core module */" >> tmp.fil; \ case $$cm in \ CM920T) echo -n "#define CONFIG_ARM920" >> tmp.fil; \ echo -n "T 1 /* CPU" >> tmp.fil; \ echo -n " core is ARM920T" >> tmp.fil; \ echo " */" >> tmp.fil; \ cpu=arm920t;; \ CM946E_S) echo -n "#define CONFIG_ARM946" >> tmp.fil; \ echo -n "E_S 1 /* CPU" >> tmp.fil; \ echo -n " core is ARM946E-S" >> tmp.fil; \ echo " */" >> tmp.fil; \ cpu=arm946es;; \ CM926EJ_S) echo -n "#define CONFIG_ARM926" >> tmp.fil; \ echo -n "EJ_S 1 /* CPU" >> tmp.fil; \ echo -n " core is ARM926EJ-S" >> tmp.fil; \ echo " */" >> tmp.fil; \ cpu=arm926ejs;; \ *) echo -n "#define CONFIG_ARM_IN" >> tmp.fil; \ echo -n "TCM 1 /* Int" >> tmp.fil; \ echo -n "egrator core module w" >> tmp.fil; \ echo -n "ith unported core" >> tmp.fil; \ echo " */" >> tmp.fil; \ cpu=arm_intcm;; \ esac; \ mv tmp.fil ./include/config.h; \ ubootlds=board/$(call xtract_int_board,cp,$@)/u-boot.lds; \ sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \ $$ubootlds > $$ubootlds.tmp; \ mv -f $$ubootlds.tmp $$ubootlds; \ ./mkconfig -a $(call xtract_int_board,cp,$@) arm $$cpu \ $(call xtract_int_board,cp,$@); lpd7a400_config \ lpd7a404_config: unconfig @./mkconfig $(@:_config=) arm lh7a40x lpd7a40x mx1ads_config : unconfig @./mkconfig $(@:_config=) arm arm920t mx1ads NULL imx mx1fs2_config : unconfig @./mkconfig $(@:_config=) arm arm920t mx1fs2 NULL imx omap1510inn_config : unconfig @./mkconfig $(@:_config=) arm arm925t omap1510inn omap5912osk_config : unconfig @./mkconfig $(@:_config=) arm arm926ejs omap5912osk omap1610inn_config \ omap1610inn_cs0boot_config \ omap1610inn_cs3boot_config \ omap1610inn_cs_autoboot_config \ omap1610h2_config \ omap1610h2_cs0boot_config \ omap1610h2_cs3boot_config \ omap1610h2_cs_autoboot_config: unconfig @if [ "$(findstring _cs0boot_, $@)" ] ; then \ echo "#define CONFIG_CS0_BOOT" >> ./include/config.h ; \ echo "... configured for CS0 boot"; \ elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \ echo "#define CONFIG_CS_AUTOBOOT" >> ./include/config.h ; \ echo "... configured for CS_AUTO boot"; \ else \ echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \ echo "... configured for CS3 boot"; \ fi; @./mkconfig -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn omap730p2_config \ omap730p2_cs0boot_config \ omap730p2_cs3boot_config : unconfig @if [ "$(findstring _cs0boot_, $@)" ] ; then \ echo "#define CONFIG_CS0_BOOT" >> ./include/config.h ; \ echo "... configured for CS0 boot"; \ else \ echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \ echo "... configured for CS3 boot"; \ fi; @./mkconfig -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 scb9328_config : unconfig @./mkconfig $(@:_config=) arm arm920t scb9328 NULL imx smdk2400_config : unconfig @./mkconfig $(@:_config=) arm arm920t smdk2400 NULL s3c24x0 smdk2410_config : unconfig @./mkconfig $(@:_config=) arm arm920t smdk2410 NULL s3c24x0 SX1_config : unconfig @./mkconfig $(@:_config=) arm arm925t sx1 # TRAB default configuration: 8 MB Flash, 32 MB RAM trab_config \ trab_bigram_config \ trab_bigflash_config \ trab_old_config: unconfig @ >include/config.h @[ -z "$(findstring _bigram,$@)" ] || \ { echo "#define CONFIG_FLASH_8MB" >>include/config.h ; \ echo "#define CONFIG_RAM_32MB" >>include/config.h ; \ echo "... with 8 MB Flash, 32 MB RAM" ; \ } @[ -z "$(findstring _bigflash,$@)" ] || \ { echo "#define CONFIG_FLASH_16MB" >>include/config.h ; \ echo "#define CONFIG_RAM_16MB" >>include/config.h ; \ echo "... with 16 MB Flash, 16 MB RAM" ; \ echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \ } @[ -z "$(findstring _old,$@)" ] || \ { echo "#define CONFIG_FLASH_8MB" >>include/config.h ; \ echo "#define CONFIG_RAM_16MB" >>include/config.h ; \ echo "... with 8 MB Flash, 16 MB RAM" ; \ echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \ } @./mkconfig -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0 VCMA9_config : unconfig @./mkconfig $(@:_config=) arm arm920t vcma9 mpl s3c24x0 versatile_config : unconfig @./mkconfig $(@:_config=) arm arm926ejs versatile voiceblue_smallflash_config \ voiceblue_config: unconfig @if [ "$(findstring _smallflash_,$@)" ] ; then \ echo "... boot from lower flash bank" ; \ echo "#define VOICEBLUE_SMALL_FLASH" >>include/config.h ; \ echo "VOICEBLUE_SMALL_FLASH=y" >board/voiceblue/config.tmp ; \ else \ echo "... boot from upper flash bank" ; \ >include/config.h ; \ echo "VOICEBLUE_SMALL_FLASH=n" >board/voiceblue/config.tmp ; \ fi @./mkconfig -a voiceblue arm arm925t voiceblue cm4008_config : unconfig @./mkconfig $(@:_config=) arm arm920t cm4008 NULL ks8695 cm41xx_config : unconfig @./mkconfig $(@:_config=) arm arm920t cm41xx NULL ks8695 ######################################################################### ## S3C44B0 Systems ######################################################################### B2_config : unconfig @./mkconfig $(@:_config=) arm s3c44b0 B2 dave ######################################################################### ## ARM720T Systems ######################################################################### armadillo_config: unconfig @./mkconfig $(@:_config=) arm arm720t armadillo ep7312_config : unconfig @./mkconfig $(@:_config=) arm arm720t ep7312 impa7_config : unconfig @./mkconfig $(@:_config=) arm arm720t impa7 modnet50_config : unconfig @./mkconfig $(@:_config=) arm arm720t modnet50 evb4510_config : unconfig @./mkconfig $(@:_config=) arm arm720t evb4510 ######################################################################### ## XScale Systems ######################################################################### adsvix_config : unconfig @./mkconfig $(@:_config=) arm pxa adsvix cerf250_config : unconfig @./mkconfig $(@:_config=) arm pxa cerf250 cradle_config : unconfig @./mkconfig $(@:_config=) arm pxa cradle csb226_config : unconfig @./mkconfig $(@:_config=) arm pxa csb226 innokom_config : unconfig @./mkconfig $(@:_config=) arm pxa innokom ixdp425_config : unconfig @./mkconfig $(@:_config=) arm ixp ixdp425 lubbock_config : unconfig @./mkconfig $(@:_config=) arm pxa lubbock logodl_config : unconfig @./mkconfig $(@:_config=) arm pxa logodl wepep250_config : unconfig @./mkconfig $(@:_config=) arm pxa wepep250 xaeniax_config : unconfig @./mkconfig $(@:_config=) arm pxa xaeniax xm250_config : unconfig @./mkconfig $(@:_config=) arm pxa xm250 xsengine_config : unconfig @./mkconfig $(@:_config=) arm pxa xsengine ######################################################################### ## ARM1136 Systems ######################################################################### omap2420h4_config : unconfig @./mkconfig $(@:_config=) arm arm1136 omap2420h4 #======================================================================== # i386 #======================================================================== ######################################################################### ## AMD SC520 CDP ######################################################################### sc520_cdp_config : unconfig @./mkconfig $(@:_config=) i386 i386 sc520_cdp sc520_spunk_config : unconfig @./mkconfig $(@:_config=) i386 i386 sc520_spunk sc520_spunk_rel_config : unconfig @./mkconfig $(@:_config=) i386 i386 sc520_spunk #======================================================================== # MIPS #======================================================================== ######################################################################### ## MIPS32 4Kc ######################################################################### xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1)))) incaip_100MHz_config \ incaip_133MHz_config \ incaip_150MHz_config \ incaip_config: unconfig @ >include/config.h @[ -z "$(findstring _100MHz,$@)" ] || \ { echo "#define CPU_CLOCK_RATE 100000000" >>include/config.h ; \ echo "... with 100MHz system clock" ; \ } @[ -z "$(findstring _133MHz,$@)" ] || \ { echo "#define CPU_CLOCK_RATE 133000000" >>include/config.h ; \ echo "... with 133MHz system clock" ; \ } @[ -z "$(findstring _150MHz,$@)" ] || \ { echo "#define CPU_CLOCK_RATE 150000000" >>include/config.h ; \ echo "... with 150MHz system clock" ; \ } @./mkconfig -a $(call xtract_incaip,$@) mips mips incaip tb0229_config: unconfig @./mkconfig $(@:_config=) mips mips tb0229 ######################################################################### ## MIPS32 AU1X00 ######################################################################### dbau1000_config : unconfig @ >include/config.h @echo "#define CONFIG_DBAU1000 1" >>include/config.h @./mkconfig -a dbau1x00 mips mips dbau1x00 dbau1100_config : unconfig @ >include/config.h @echo "#define CONFIG_DBAU1100 1" >>include/config.h @./mkconfig -a dbau1x00 mips mips dbau1x00 dbau1500_config : unconfig @ >include/config.h @echo "#define CONFIG_DBAU1500 1" >>include/config.h @./mkconfig -a dbau1x00 mips mips dbau1x00 dbau1550_config : unconfig @ >include/config.h @echo "#define CONFIG_DBAU1550 1" >>include/config.h @./mkconfig -a dbau1x00 mips mips dbau1x00 dbau1550_el_config : unconfig @ >include/config.h @echo "#define CONFIG_DBAU1550 1" >>include/config.h @./mkconfig -a dbau1x00 mips mips dbau1x00 pb1000_config : unconfig @ >include/config.h @echo "#define CONFIG_PB1000 1" >>include/config.h @./mkconfig -a pb1x00 mips mips pb1x00 ######################################################################### ## MIPS64 5Kc ######################################################################### purple_config : unconfig @./mkconfig $(@:_config=) mips mips purple #======================================================================== # Nios #======================================================================== ######################################################################### ## Nios32 ######################################################################### DK1C20_safe_32_config \ DK1C20_standard_32_config \ DK1C20_config: unconfig @ >include/config.h @[ -z "$(findstring _safe_32,$@)" ] || \ { echo "#define CONFIG_NIOS_SAFE_32 1" >>include/config.h ; \ echo "... NIOS 'safe_32' configuration" ; \ } @[ -z "$(findstring _standard_32,$@)" ] || \ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \ echo "... NIOS 'standard_32' configuration" ; \ } @[ -z "$(findstring DK1C20_config,$@)" ] || \ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \ echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \ } @./mkconfig -a DK1C20 nios nios dk1c20 altera DK1S10_safe_32_config \ DK1S10_standard_32_config \ DK1S10_mtx_ldk_20_config \ DK1S10_config: unconfig @ >include/config.h @[ -z "$(findstring _safe_32,$@)" ] || \ { echo "#define CONFIG_NIOS_SAFE_32 1" >>include/config.h ; \ echo "... NIOS 'safe_32' configuration" ; \ } @[ -z "$(findstring _standard_32,$@)" ] || \ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \ echo "... NIOS 'standard_32' configuration" ; \ } @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \ { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>include/config.h ; \ echo "... NIOS 'mtx_ldk_20' configuration" ; \ } @[ -z "$(findstring DK1S10_config,$@)" ] || \ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \ echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \ } @./mkconfig -a DK1S10 nios nios dk1s10 altera ADNPESC1_DNPEVA2_base_32_config \ ADNPESC1_base_32_config \ ADNPESC1_config: unconfig @ >include/config.h @[ -z "$(findstring _DNPEVA2,$@)" ] || \ { echo "#define CONFIG_DNPEVA2 1" >>include/config.h ; \ echo "... DNP/EVA2 configuration" ; \ } @[ -z "$(findstring _base_32,$@)" ] || \ { echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \ echo "... NIOS 'base_32' configuration" ; \ } @[ -z "$(findstring ADNPESC1_config,$@)" ] || \ { echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \ echo "... NIOS 'base_32' configuration (DEFAULT)" ; \ } @./mkconfig -a ADNPESC1 nios nios adnpesc1 ssv ######################################################################### ## Nios-II ######################################################################### PK1C20_config : unconfig @./mkconfig PK1C20 nios2 nios2 pk1c20 psyent PCI5441_config : unconfig @./mkconfig PCI5441 nios2 nios2 pci5441 psyent #======================================================================== # MicroBlaze #======================================================================== ######################################################################### ## Microblaze ######################################################################### suzaku_config: unconfig @ >include/config.h @echo "#define CONFIG_SUZAKU 1" >> include/config.h @./mkconfig -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno ######################################################################### ######################################################################### clean: find . -type f \ \( -name 'core' -o -name '*.bak' -o -name '*~' \ -o -name '*.o' -o -name '*.a' \) -print \ | xargs rm -f rm -f examples/hello_world examples/timer \ examples/eepro100_eeprom examples/sched \ examples/mem_to_mem_idma2intr examples/82559_eeprom \ examples/test_burst rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr rm -f tools/mpc86x_clk tools/ncb rm -f tools/easylogo/easylogo tools/bmp_logo rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend rm -f tools/env/fw_printenv tools/env/fw_setenv rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image rm -f board/trab/trab_fkt board/voiceblue/eeprom clobber: clean find . -type f \( -name .depend \ -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \ -print0 \ | xargs -0 rm -f rm -f $(OBJS) *.bak tags TAGS rm -fr *.*~ rm -f u-boot u-boot.map u-boot.hex $(ALL) rm -f tools/crc32.c tools/environment.c tools/env/crc32.c rm -f tools/inca-swap-bytes cpu/mpc824x/bedbug_603e.c rm -f include/asm/proc include/asm/arch include/asm mrproper \ distclean: clobber unconfig backup: F=`basename $(TOPDIR)` ; cd .. ; \ gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F #########################################################################