From 83853178bd36bca6f0f8f1331476620c84a587fc Mon Sep 17 00:00:00 2001 From: Ed Swarthout Date: Wed, 7 Mar 2007 12:14:50 -0600 Subject: net - Support ping reply when processing net-loop Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY. This permits the ping command to test the phy interface when the phy is put in loopback mode (typically by setting register 0 bit 14). It also allows the port to respond to an external ping when u-boot is processing some other net command (such as tftp). This is useful when tftp appears to hang. Signed-off-by: Ed Swarthout Signed-off-by: Ben Warren --- net/net.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'net/net.c') diff --git a/net/net.c b/net/net.c index 1d1c98f..2ff7bfc 100644 --- a/net/net.c +++ b/net/net.c @@ -1424,6 +1424,26 @@ NetReceive(volatile uchar * inpkt, int len) /* XXX point to ip packet */ (*packetHandler)((uchar *)ip, 0, 0, 0); return; + case ICMP_ECHO_REQUEST: +#ifdef ET_DEBUG + printf ("Got ICMP ECHO REQUEST, return %d bytes \n", + ETHER_HDR_SIZE + len); +#endif + memcpy (&et->et_dest[0], &et->et_src[0], 6); + memcpy (&et->et_src[ 0], NetOurEther, 6); + + ip->ip_sum = 0; + ip->ip_off = 0; + NetCopyIP((void*)&ip->ip_dst, &ip->ip_src); + NetCopyIP((void*)&ip->ip_src, &NetOurIP); + ip->ip_sum = ~NetCksum((uchar *)ip, IP_HDR_SIZE_NO_UDP >> 1); + + icmph->type = ICMP_ECHO_REPLY; + icmph->checksum = 0; + icmph->checksum = ~NetCksum((uchar *)icmph, + (len - IP_HDR_SIZE_NO_UDP) >> 1); + (void) eth_send((uchar *)et, ETHER_HDR_SIZE + len); + return; #endif default: return; -- cgit v1.1