From f68a9c6b3db80f00d62963e788f8dadc0657b2b6 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 29 Apr 2015 22:28:09 -0300 Subject: mx6cuboxi: Add HDMI output support Add HDMI output using PLL5 as the source for the IPU clocks, and accurate VESA timings. These settings are based on the patch from Soeren Moch submitted for the tbs2910 mx6 based board. It allows the display to work properly at 1024x768@60. This should make the hdmi output signal compatible with most if not all modern displays. Signed-off-by: Jon Nettleton Signed-off-by: Fabio Estevam Reviewed-by: Tom Rini Tested-by: Tom Rini Signed-off-by: Rabeeh Khoury Signed-off-by: Fabio Estevam Reviewed-by: Tom Rini Tested-by: Vagrant Cascadian --- include/configs/mx6cuboxi.h | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h index b569f34..207a2a6 100644 --- a/include/configs/mx6cuboxi.h +++ b/include/configs/mx6cuboxi.h @@ -27,7 +27,7 @@ #define CONFIG_IMX6_THERMAL #define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_SYS_MALLOC_LEN (2 * SZ_1M) +#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_LATE_INIT #define CONFIG_MXC_GPIO @@ -66,6 +66,22 @@ #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 +/* Framebuffer */ +#define CONFIG_VIDEO +#define CONFIG_VIDEO_IPUV3 +#define CONFIG_IPUV3_CLK 260000000 +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SPLASH_SCREEN_ALIGN +#define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_BMP_LOGO +#define CONFIG_IMX_HDMI +#define CONFIG_IMX_VIDEO_SKIP + #define CONFIG_SYS_NO_FLASH /* Command definition */ -- cgit v1.1