From cc5a7001a79d88c399545d8c62e57665be7efb83 Mon Sep 17 00:00:00 2001 From: "Ye.Li" Date: Thu, 7 May 2015 12:16:19 +0800 Subject: MLK-10841 imx: mx6ul_ddr3_arm2: Add support for WEIMNOR boot Correct the EIMNOR settings to non-mux mode and set the environment variables configuration to FLASH when using WEIMNOR boot. New target is added for build WEIMNOR boot u-boot: mx6ul_ddr3_arm2_eimnor_config Signed-off-by: Ye.Li --- include/configs/mx6ul_ddr3_arm2.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/configs/mx6ul_ddr3_arm2.h b/include/configs/mx6ul_ddr3_arm2.h index aea199d..23be08c 100644 --- a/include/configs/mx6ul_ddr3_arm2.h +++ b/include/configs/mx6ul_ddr3_arm2.h @@ -345,7 +345,7 @@ #define CONFIG_SYS_FLASH_BASE WEIM_ARB_BASE_ADDR #define CONFIG_SYS_FLASH_SECT_SIZE (128 * 1024) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* max number of sectors on one chip */ #define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */ #define CONFIG_FLASH_CFI_DRIVER /* Use drivers/cfi_flash.c */ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* Use buffered writes*/ @@ -376,6 +376,11 @@ #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#elif defined(CONFIG_ENV_IS_IN_FLASH) +#undef CONFIG_ENV_SIZE +#define CONFIG_ENV_SIZE CONFIG_SYS_FLASH_SECT_SIZE +#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SIZE +#define CONFIG_ENV_OFFSET (4 * CONFIG_SYS_FLASH_SECT_SIZE) #elif defined(CONFIG_ENV_IS_IN_NAND) #undef CONFIG_ENV_SIZE #define CONFIG_ENV_OFFSET (8 << 20) -- cgit v1.1