From ef11df6b66ecf5797e94ba322254b8fb7a4e2e12 Mon Sep 17 00:00:00 2001
From: John Rigby <jrigby@freescale.com>
Date: Tue, 5 Aug 2008 17:38:57 -0600
Subject: mpc5121: squash some fdt fixup errors

On ADS5121 when booting linux the following errors are seen:
    Unable to update property /soc5121@80000000:bus-frequency, err=FDT_ERR_NOTFOUND
    Unable to update property /soc5121@80000000/ethernet@2800:local-mac-address, err=FDT_ERR_NOTFOUND
    Unable to update property /soc5121@80000000/ethernet@2800:address, err=FDT_ERR_NOTFOUND

This is caused by ft_cpu_setup trying to deal with
both old and new soc node naming.  This patch
fixes this by being smarter about what to
fixup.

Also do soc node fixups by compatible instead of by path.
A new board config called OF_SOC_COMPAT defined
to be "fsl,mpc5121-immr" replaces the old
OF_SOC node path that was defined to be "soc@80000000".

Old device trees still work, but the compatiblity
is conditional on CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
which is on by default in include/configs/ads5121.h.

Signed-off-by: John Rigby <jrigby@freescale.com>
---
 include/configs/ads5121.h | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'include')

diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h
index f104e68..091da80 100644
--- a/include/configs/ads5121.h
+++ b/include/configs/ads5121.h
@@ -308,6 +308,7 @@
 #define CONFIG_PHY_ADDR		0x1
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_FEC_AN_TIMEOUT	1
+#define CONFIG_HAS_ETH0
 
 /*
  * Configure on-board RTC
@@ -478,10 +479,10 @@
 
 #define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_OF_SUPPORT_OLD_DEVICE_TREES	1
 
 #define OF_CPU			"PowerPC,5121@0"
-#define OF_SOC			"soc@80000000"
-#define OF_SOC_OLD		"soc5121@80000000"
+#define OF_SOC_COMPAT		"fsl,mpc5121-immr"
 #define OF_TBCLK		(bd->bi_busfreq / 4)
 #define OF_STDOUT_PATH		"/soc@80000000/serial@11300"
 
-- 
cgit v1.1


From 6689484ccd43189322aaa5a1c6cd02cdd511ad7d Mon Sep 17 00:00:00 2001
From: Kenneth Johansson <kenneth@southpole.se>
Date: Tue, 15 Jul 2008 12:13:38 +0200
Subject: mpc5121: Move iopin features from board specific to common files.

And in the process eliminate some duplicate register defines.

Signed-off-by: Kenneth Johansson <kenneth@southpole.se>
---
 include/mpc512x.h | 251 +++++++++++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 218 insertions(+), 33 deletions(-)

(limited to 'include')

diff --git a/include/mpc512x.h b/include/mpc512x.h
index b4cc2b9..a76b1ca 100644
--- a/include/mpc512x.h
+++ b/include/mpc512x.h
@@ -347,41 +347,226 @@
 
 /* IO Control Register
  */
+#define IOCTL_MEM		0x000
+#define IOCTL_GP		0x004
+#define IOCTL_LPC_CLK		0x008
+#define IOCTL_LPC_OE		0x00C
+#define IOCTL_LPC_RWB		0x010
+#define IOCTL_LPC_ACK		0x014
+#define IOCTL_LPC_CS0		0x018
+#define IOCTL_NFC_CE0		0x01C
+#define IOCTL_LPC_CS1		0x020
+#define IOCTL_LPC_CS2		0x024
+#define IOCTL_LPC_AX03		0x028
+#define IOCTL_EMB_AX02		0x02C
+#define IOCTL_EMB_AX01		0x030
+#define IOCTL_EMB_AX00		0x034
+#define IOCTL_EMB_AD31		0x038
+#define IOCTL_EMB_AD30		0x03C
+#define IOCTL_EMB_AD29		0x040
+#define IOCTL_EMB_AD28		0x044
+#define IOCTL_EMB_AD27		0x048
+#define IOCTL_EMB_AD26		0x04C
+#define IOCTL_EMB_AD25		0x050
+#define IOCTL_EMB_AD24		0x054
+#define IOCTL_EMB_AD23		0x058
+#define IOCTL_EMB_AD22		0x05C
+#define IOCTL_EMB_AD21		0x060
+#define IOCTL_EMB_AD20		0x064
+#define IOCTL_EMB_AD19		0x068
+#define IOCTL_EMB_AD18		0x06C
+#define IOCTL_EMB_AD17		0x070
+#define IOCTL_EMB_AD16		0x074
+#define IOCTL_EMB_AD15		0x078
+#define IOCTL_EMB_AD14		0x07C
+#define IOCTL_EMB_AD13		0x080
+#define IOCTL_EMB_AD12		0x084
+#define IOCTL_EMB_AD11		0x088
+#define IOCTL_EMB_AD10		0x08C
+#define IOCTL_EMB_AD09		0x090
+#define IOCTL_EMB_AD08		0x094
+#define IOCTL_EMB_AD07		0x098
+#define IOCTL_EMB_AD06		0x09C
+#define IOCTL_EMB_AD05		0x0A0
+#define IOCTL_EMB_AD04		0x0A4
+#define IOCTL_EMB_AD03		0x0A8
+#define IOCTL_EMB_AD02		0x0AC
+#define IOCTL_EMB_AD01		0x0B0
+#define IOCTL_EMB_AD00		0x0B4
+#define IOCTL_PATA_CE1		0x0B8
+#define IOCTL_PATA_CE2		0x0BC
+#define IOCTL_PATA_ISOLATE	0x0C0
+#define IOCTL_PATA_IOR		0x0C4
+#define IOCTL_PATA_IOW		0x0C8
+#define IOCTL_PATA_IOCHRDY	0x0CC
+#define IOCTL_PATA_INTRQ	0x0D0
+#define IOCTL_PATA_DRQ		0x0D4
+#define IOCTL_PATA_DACK		0x0D8
+#define IOCTL_NFC_WP		0x0DC
+#define IOCTL_NFC_RB		0x0E0
+#define IOCTL_NFC_ALE		0x0E4
+#define IOCTL_NFC_CLE		0x0E8
+#define IOCTL_NFC_WE		0x0EC
+#define IOCTL_NFC_RE		0x0F0
+#define IOCTL_PCI_AD31		0x0F4
+#define IOCTL_PCI_AD30		0x0F8
+#define IOCTL_PCI_AD29		0x0FC
+#define IOCTL_PCI_AD28		0x100
+#define IOCTL_PCI_AD27		0x104
+#define IOCTL_PCI_AD26		0x108
+#define IOCTL_PCI_AD25		0x10C
+#define IOCTL_PCI_AD24		0x110
+#define IOCTL_PCI_AD23		0x114
+#define IOCTL_PCI_AD22		0x118
+#define IOCTL_PCI_AD21		0x11C
+#define IOCTL_PCI_AD20		0x120
+#define IOCTL_PCI_AD19		0x124
+#define IOCTL_PCI_AD18		0x128
+#define IOCTL_PCI_AD17		0x12C
+#define IOCTL_PCI_AD16		0x130
+#define IOCTL_PCI_AD15		0x134
+#define IOCTL_PCI_AD14		0x138
+#define IOCTL_PCI_AD13		0x13C
+#define IOCTL_PCI_AD12		0x140
+#define IOCTL_PCI_AD11		0x144
+#define IOCTL_PCI_AD10		0x148
+#define IOCTL_PCI_AD09		0x14C
+#define IOCTL_PCI_AD08		0x150
+#define IOCTL_PCI_AD07		0x154
+#define IOCTL_PCI_AD06		0x158
+#define IOCTL_PCI_AD05		0x15C
+#define IOCTL_PCI_AD04		0x160
+#define IOCTL_PCI_AD03		0x164
+#define IOCTL_PCI_AD02		0x168
+#define IOCTL_PCI_AD01		0x16C
+#define IOCTL_PCI_AD00		0x170
+#define IOCTL_PCI_CBE0		0x174
+#define IOCTL_PCI_CBE1		0x178
+#define IOCTL_PCI_CBE2		0x17C
+#define IOCTL_PCI_CBE3		0x180
+#define IOCTL_PCI_GNT2		0x184
+#define IOCTL_PCI_REQ2		0x188
+#define IOCTL_PCI_GNT1		0x18C
+#define IOCTL_PCI_REQ1		0x190
+#define IOCTL_PCI_GNT0		0x194
+#define IOCTL_PCI_REQ0		0x198
+#define IOCTL_PCI_INTA		0x19C
+#define IOCTL_PCI_CLK		0x1A0
+#define IOCTL_PCI_RST_OUT	0x1A4
+#define IOCTL_PCI_FRAME		0x1A8
+#define IOCTL_PCI_IDSEL		0x1AC
+#define IOCTL_PCI_DEVSEL	0x1B0
+#define IOCTL_PCI_IRDY		0x1B4
+#define IOCTL_PCI_TRDY		0x1B8
+#define IOCTL_PCI_STOP		0x1BC
+#define IOCTL_PCI_PAR		0x1C0
+#define IOCTL_PCI_PERR		0x1C4
+#define IOCTL_PCI_SERR		0x1C8
+#define IOCTL_SPDIF_TXCLK	0x1CC
+#define IOCTL_SPDIF_TX		0x1D0
+#define IOCTL_SPDIF_RX		0x1D4
+#define IOCTL_I2C0_SCL		0x1D8
+#define IOCTL_I2C0_SDA		0x1DC
+#define IOCTL_I2C1_SCL		0x1E0
+#define IOCTL_I2C1_SDA		0x1E4
+#define IOCTL_I2C2_SCL		0x1E8
+#define IOCTL_I2C2_SDA		0x1EC
+#define IOCTL_IRQ0		0x1F0
+#define IOCTL_IRQ1		0x1F4
+#define IOCTL_CAN1_TX		0x1F8
+#define IOCTL_CAN2_TX		0x1FC
+#define IOCTL_J1850_TX		0x200
+#define IOCTL_J1850_RX		0x204
+#define IOCTL_PSC_MCLK_IN	0x208
+#define IOCTL_PSC0_0		0x20C
+#define IOCTL_PSC0_1		0x210
+#define IOCTL_PSC0_2		0x214
+#define IOCTL_PSC0_3		0x218
+#define IOCTL_PSC0_4		0x21C
+#define IOCTL_PSC1_0		0x220
+#define IOCTL_PSC1_1		0x224
+#define IOCTL_PSC1_2		0x228
+#define IOCTL_PSC1_3		0x22C
+#define IOCTL_PSC1_4		0x230
+#define IOCTL_PSC2_0		0x234
+#define IOCTL_PSC2_1		0x238
+#define IOCTL_PSC2_2		0x23C
+#define IOCTL_PSC2_3		0x240
+#define IOCTL_PSC2_4		0x244
+#define IOCTL_PSC3_0		0x248
+#define IOCTL_PSC3_1		0x24C
+#define IOCTL_PSC3_2		0x250
+#define IOCTL_PSC3_3		0x254
+#define IOCTL_PSC3_4		0x258
+#define IOCTL_PSC4_0		0x25C
+#define IOCTL_PSC4_1		0x260
+#define IOCTL_PSC4_2		0x264
+#define IOCTL_PSC4_3		0x268
+#define IOCTL_PSC4_4		0x26C
+#define IOCTL_PSC5_0		0x270
+#define IOCTL_PSC5_1		0x274
+#define IOCTL_PSC5_2		0x278
+#define IOCTL_PSC5_3		0x27C
+#define IOCTL_PSC5_4		0x280
+#define IOCTL_PSC6_0		0x284
+#define IOCTL_PSC6_1		0x288
+#define IOCTL_PSC6_2		0x28C
+#define IOCTL_PSC6_3		0x290
+#define IOCTL_PSC6_4		0x294
+#define IOCTL_PSC7_0		0x298
+#define IOCTL_PSC7_1		0x29C
+#define IOCTL_PSC7_2		0x2A0
+#define IOCTL_PSC7_3		0x2A4
+#define IOCTL_PSC7_4		0x2A8
+#define IOCTL_PSC8_0		0x2AC
+#define IOCTL_PSC8_1		0x2B0
+#define IOCTL_PSC8_2		0x2B4
+#define IOCTL_PSC8_3		0x2B8
+#define IOCTL_PSC8_4		0x2BC
+#define IOCTL_PSC9_0		0x2C0
+#define IOCTL_PSC9_1		0x2C4
+#define IOCTL_PSC9_2		0x2C8
+#define IOCTL_PSC9_3		0x2CC
+#define IOCTL_PSC9_4		0x2D0
+#define IOCTL_PSC10_0		0x2D4
+#define IOCTL_PSC10_1		0x2D8
+#define IOCTL_PSC10_2		0x2DC
+#define IOCTL_PSC10_3		0x2E0
+#define IOCTL_PSC10_4		0x2E4
+#define IOCTL_PSC11_0		0x2E8
+#define IOCTL_PSC11_1		0x2EC
+#define IOCTL_PSC11_2		0x2F0
+#define IOCTL_PSC11_3		0x2F4
+#define IOCTL_PSC11_4		0x2F8
+#define IOCTL_HRESET		0x2FC
+#define IOCTL_SRESET		0x300
+#define IOCTL_CKSTP_OUT		0x304
+#define IOCTL_USB2_VBUS_PWR_FAULT	0x308
+#define IOCTL_USB2_VBUS_PWR_SELECT	0x30C
+#define IOCTL_USB2_PHY_DRVV_BUS		0x310
+
+#ifndef __ASSEMBLY__
+
+
+/* IO pin fields */
+#define IO_PIN_FMUX(v)	((v) << 7)	/* pin function */
+#define IO_PIN_HOLD(v)	((v) << 5)	/* hold time, pci only */
+#define IO_PIN_PUD(v)	((v) << 4)	/* if PUE, 0=pull-down, 1=pull-up */
+#define IO_PIN_PUE(v)	((v) << 3)	/* pull up/down enable */
+#define IO_PIN_ST(v)	((v) << 2)	/* schmitt trigger */
+#define IO_PIN_DS(v)	((v))		/* slew rate */
+
+typedef struct iopin_t {
+	int p_offset;		/* offset from IOCTL_MEM_OFFSET */
+	int nr_pins;		/* number of pins to set this way */
+	int bit_or;		/* or in the value instead of overwrite */
+	u_long val;		/* value to write or or */
+}iopin_t;
+
+void iopin_initialize(iopin_t *,int);
+#endif
 
 /* Indexes in regs array */
-#define MEM_IDX			0x00
-#define PATA_CE1_IDX		0x2e
-#define PATA_CE2_IDX		0x2f
-#define PATA_ISOLATE_IDX	0x30
-#define PATA_IOR_IDX		0x31
-#define PATA_IOW_IDX		0x32
-#define PATA_IOCHRDY_IDX	0x33
-#define PATA_INTRQ_IDX		0x34
-#define PATA_DRQ_IDX		0x35
-#define PATA_DACK_IDX		0x36
-#define SPDIF_TXCLOCK_IDX	0x73
-#define SPDIF_TX_IDX		0x74
-#define SPDIF_RX_IDX		0x75
-#define PSC0_0_IDX		0x83
-#define PSC0_1_IDX		0x84
-#define PSC0_2_IDX		0x85
-#define PSC0_3_IDX		0x86
-#define PSC0_4_IDX		0x87
-#define PSC1_0_IDX		0x88
-#define PSC1_1_IDX		0x89
-#define PSC1_2_IDX		0x8a
-#define PSC1_3_IDX		0x8b
-#define PSC1_4_IDX		0x8c
-#define PSC2_0_IDX		0x8d
-#define PSC2_1_IDX		0x8e
-#define PSC2_2_IDX		0x8f
-#define PSC2_3_IDX		0x90
-#define PSC2_4_IDX		0x91
-
-#define IOCTRL_FUNCMUX_SHIFT	7
-#define IOCTRL_FUNCMUX_FEC	1
-#define IOCTRL_MUX_FEC		(IOCTRL_FUNCMUX_FEC << IOCTRL_FUNCMUX_SHIFT)
-
 /* Set for DDR */
 #define IOCTRL_MUX_DDR		0x00000036
 
-- 
cgit v1.1


From eab1007334b93a6209f1ec33615e26ef5311ede7 Mon Sep 17 00:00:00 2001
From: "Steven A. Falco" <sfalco@harris.com>
Date: Wed, 6 Aug 2008 15:42:52 -0400
Subject: ppc4xx: Sequoia has two UARTs in "4-pin" mode. Configure the GPIOs as
 per schematic.

The Sequoia board has two UARTs in "4-pin" mode. This patch modifies the GPIO
configuration to match the schematic, and also sets the SDR0_PFC1 register to
select the corresponding mode for the UARTs.

Signed-off-by: Steven A. Falco <sfalco@harris.com>
Signed-off-by: Stefan Roese <sr@denx.de>
---
 include/configs/sequoia.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'include')

diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index f4eefae..730037e 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -422,12 +422,12 @@
 /* GPIO Core 1 */									\
 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO32 USB2D_OPMODE0	EBC_DATA(2)	*/	\
 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO33 USB2D_OPMODE1	EBC_DATA(3)	*/	\
-{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N	UART1_DSR_CTS_N	UART2_SOUT*/ \
-{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
-{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N EBC_DATA(0)	UART3_SIN*/ \
-{GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N	EBC_DATA(1)	UART3_SOUT*/ \
-{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N	UART1_SOUT	*/	\
-{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N	UART1_SIN	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO34 UART0_8PIN_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO36 UART0_CTS_N	EBC_DATA(0)	UART3_SIN*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO37 UART0_RTS_N	EBC_DATA(1)	UART3_SOUT*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_8PIN_DTR_N UART1_SOUT	*/	\
+{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_8PIN_RI_N UART1_SIN	*/	\
 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0)			*/	\
 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1)			*/	\
 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2)			*/	\
-- 
cgit v1.1


From fd0f2f3796ff2a7a32d35deb1b7996e485849df7 Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Date: Wed, 9 Jul 2008 21:07:38 +0900
Subject: usb: add support for R8A66597 usb controller

add support for Renesas R8A66597 usb controller.
This patch supports USB Host mode.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Markus Klotzbuecher <mk@denx.de>
---
 include/usb.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'include')

diff --git a/include/usb.h b/include/usb.h
index 5a6ffdd..e68e98e 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -171,7 +171,7 @@ struct usb_device {
 
 #if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || \
 	defined(CONFIG_USB_OHCI_NEW) || defined (CONFIG_USB_SL811HS) || \
-	defined(CONFIG_USB_ISP116X_HCD)
+	defined(CONFIG_USB_ISP116X_HCD) || defined(CONFIG_USB_R8A66597_HCD)
 
 int usb_lowlevel_init(void);
 int usb_lowlevel_stop(void);
-- 
cgit v1.1


From 3b8d17f0f082073346c0df017c9dfd6acdb40d6d Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@denx.de>
Date: Fri, 8 Aug 2008 16:41:56 +0200
Subject: TQM8xxL: fix support for second flash bank

When switching the TQM8xxL modules to use the CFI flash driver,
support for the second flash bank was broken because the CFI driver
did not support dynamically sized banks. This gets fixed now.

Signed-off-by: Wolfgang Denk <wd@denx.de>
---
 include/configs/TQM823L.h | 2 +-
 include/configs/TQM850L.h | 2 +-
 include/configs/TQM855L.h | 2 +-
 include/configs/TQM860L.h | 2 +-
 include/configs/TQM862L.h | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'include')

diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h
index 100be7c..3871722 100644
--- a/include/configs/TQM823L.h
+++ b/include/configs/TQM823L.h
@@ -196,7 +196,7 @@
 /* use CFI flash driver */
 #define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
 #define CFG_FLASH_EMPTY_INFO
 #define CFG_FLASH_USE_BUFFER_WRITE	1
 #define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h
index 3097bc3..17afa89 100644
--- a/include/configs/TQM850L.h
+++ b/include/configs/TQM850L.h
@@ -183,7 +183,7 @@
 /* use CFI flash driver */
 #define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
 #define CFG_FLASH_EMPTY_INFO
 #define CFG_FLASH_USE_BUFFER_WRITE	1
 #define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h
index 8ca8906..73d6583 100644
--- a/include/configs/TQM855L.h
+++ b/include/configs/TQM855L.h
@@ -187,7 +187,7 @@
 /* use CFI flash driver */
 #define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
 #define CFG_FLASH_EMPTY_INFO
 #define CFG_FLASH_USE_BUFFER_WRITE	1
 #define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h
index f66aace..576e3e2 100644
--- a/include/configs/TQM860L.h
+++ b/include/configs/TQM860L.h
@@ -190,7 +190,7 @@
 /* use CFI flash driver */
 #define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
 #define CFG_FLASH_EMPTY_INFO
 #define CFG_FLASH_USE_BUFFER_WRITE	1
 #define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h
index 7813a20..6d2f91b 100644
--- a/include/configs/TQM862L.h
+++ b/include/configs/TQM862L.h
@@ -190,7 +190,7 @@
 /* use CFI flash driver */
 #define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
 #define CFG_FLASH_EMPTY_INFO
 #define CFG_FLASH_USE_BUFFER_WRITE	1
 #define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
-- 
cgit v1.1


From 21f971ec265f6042ec21636d55d06a6bc0751077 Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@denx.de>
Date: Mon, 7 Jul 2008 01:22:29 +0200
Subject: TQM823L: re-enable logo support; update LCD_INFO text

Signed-off-by: Wolfgang Denk <wd@denx.de>
---
 include/configs/TQM823L.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'include')

diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h
index 3871722..d5a3c54 100644
--- a/include/configs/TQM823L.h
+++ b/include/configs/TQM823L.h
@@ -37,6 +37,8 @@
 #define CONFIG_TQM823L		1	/* ...on a TQM8xxL module	*/
 
 #ifdef	CONFIG_LCD			/* with LCD controller ?	*/
+#define CONFIG_LCD_LOGO		1	/* print our logo on the LCD	*/
+#define CONFIG_LCD_INFO		1	/* ... and some board info	*/
 #define	CONFIG_SPLASH_SCREEN		/* ... with splashscreen support*/
 #endif
 
-- 
cgit v1.1


From ba9324451b662dd393afa53e5cc36fc5d3d10966 Mon Sep 17 00:00:00 2001
From: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date: Fri, 8 Aug 2008 16:30:23 +0900
Subject: sh: Update sh7763rdp config

Add sh_eth support to sh7763rdp.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
---
 include/configs/sh7763rdp.h | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'include')

diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h
index 7713eaa..5a65663 100644
--- a/include/configs/sh7763rdp.h
+++ b/include/configs/sh7763rdp.h
@@ -38,7 +38,11 @@
 #define CONFIG_CMD_SDRAM
 #define CONFIG_CMD_FLASH
 #define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
 #define CONFIG_CMD_ENV
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_JFFS2
 
 #define CONFIG_BOOTDELAY        -1
 #define CONFIG_BOOTARGS         "console=ttySC2,115200 root=1f01"
@@ -113,4 +117,9 @@
 #define TMU_CLK_DIVIDER		(4)	/* 4 (default), 16, 64, 256 or 1024 */
 #define CFG_HZ				(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
 
+/* Ether */
+#define CONFIG_SH_ETHER 1
+#define CONFIG_SH_ETHER_USE_PORT (1)
+#define CONFIG_SH_ETHER_PHY_ADDR (0x01)
+
 #endif /* __SH7763RDP_H */
-- 
cgit v1.1


From f77d92a3f56d88e63cc02226a1204b3bdbac6961 Mon Sep 17 00:00:00 2001
From: Sergey Lapin <slapin@ossfans.org>
Date: Sat, 9 Aug 2008 01:39:09 +0400
Subject: DataFlash: AT45DB021 fix and AT45DB081 support

Fix for page size of AT45DB021. Also adding bigger AT45DB081
which comes with some newer boards.

Signed-off-by: Sergey Lapin <slapin@ossfans.org>
---
 include/dataflash.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'include')

diff --git a/include/dataflash.h b/include/dataflash.h
index 80f0633..de04139 100644
--- a/include/dataflash.h
+++ b/include/dataflash.h
@@ -135,9 +135,9 @@ struct dataflash_addr {
 	int cs;
 };
 /*-------------------------------------------------------------------------------------------------*/
-
 #define AT45DB161	0x2c
 #define AT45DB021	0x14
+#define AT45DB081	0x24
 #define AT45DB321	0x34
 #define AT45DB642	0x3c
 #define AT45DB128	0x10
-- 
cgit v1.1


From 29f8f58ff40c67f7f2e11afd1715173094e52ac2 Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@denx.de>
Date: Sat, 9 Aug 2008 23:17:32 +0200
Subject: TQM8xx{L,M}: try to normalize config files for TQM8xx? based board

- enable CFI driver where this was forgotten
- enable mtdparts support
- adjust default environment
etc.

Signed-off-by: Wolfgang Denk <wd@denx.de>
---
 include/configs/FPS850L.h  | 41 ++++++++++++++++++----
 include/configs/FPS860L.h  | 87 +++++++++++++++++++++++++++++++++++++++-------
 include/configs/NSCU.h     | 40 ++++++++++++++-------
 include/configs/TQM823L.h  | 27 ++++++++++++--
 include/configs/TQM823M.h  | 28 +++++++++++++--
 include/configs/TQM850L.h  | 27 ++++++++++++--
 include/configs/TQM850M.h  | 28 +++++++++++++--
 include/configs/TQM855L.h  | 28 +++++++++++++--
 include/configs/TQM855M.h  | 28 +++++++++++++--
 include/configs/TQM860L.h  | 24 +++++++++++--
 include/configs/TQM860M.h  | 26 +++++++++++---
 include/configs/TQM862L.h  | 28 +++++++++++++--
 include/configs/TQM862M.h  | 26 +++++++++++++-
 include/configs/TQM866M.h  | 29 +++++++++++++---
 include/configs/virtlab2.h | 40 +++++++++++++++------
 15 files changed, 440 insertions(+), 67 deletions(-)

(limited to 'include')

diff --git a/include/configs/FPS850L.h b/include/configs/FPS850L.h
index e4b68ab..66db296 100644
--- a/include/configs/FPS850L.h
+++ b/include/configs/FPS850L.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -65,10 +65,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/fps850L/uImage\0"				\
+	"hostname=FPS850L\0"						\
+	"bootfile=FPS850L/uImage\0"					\
 	"fdt_addr=40040000\0"						\
 	"kernel_addr=40060000\0"					\
 	"ramdisk_addr=40200000\0"					\
+	"u-boot=FPS850L/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -106,10 +113,14 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
 
+#define CONFIG_NETCONSOLE
+
+
 /*
  * Miscellaneous configurable options
  */
@@ -180,11 +191,15 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
@@ -194,6 +209,20 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
+/*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\
+						"128k(dtb),"		\
+						"1664k(kernel),"	\
+						"2m(rootfs),"		\
+						"4m(data)"	
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h
index ed612c3..84607cc 100644
--- a/include/configs/FPS860L.h
+++ b/include/configs/FPS860L.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -65,10 +65,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/fps850L/uImage\0"				\
+	"hostname=FPS860L\0"						\
+	"bootfile=FPS860L/uImage\0"					\
 	"fdt_addr=40040000\0"						\
 	"kernel_addr=40060000\0"					\
 	"ramdisk_addr=40200000\0"					\
+	"u-boot=FPS860L/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -106,10 +113,14 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
 
+#define CONFIG_NETCONSOLE
+
+
 /*
  * Miscellaneous configurable options
  */
@@ -180,11 +191,15 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
@@ -194,6 +209,20 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
+/*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\
+						"128k(dtb),"		\
+						"1664k(kernel),"	\
+						"2m(rootfs),"		\
+						"4m(data)"	
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
@@ -306,9 +335,11 @@
 #define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
 #define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
 
-/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
-#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV2 | OR_BI | \
-				 OR_SCY_5_CLK | OR_EHTR)
+/*
+ * FLASH timing:
+ */
+#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+				 OR_SCY_3_CLK | OR_EHTR | OR_BI)
 
 #define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
 #define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
@@ -337,12 +368,42 @@
 
 /*
  * Memory Periodic Timer Prescaler
+ *
+ * The Divider for PTA (refresh timer) configuration is based on an
+ * example SDRAM configuration (64 MBit, one bank). The adjustment to
+ * the number of chip selects (NCS) and the actually needed refresh
+ * rate is done by setting MPTPR.
+ *
+ * PTA is calculated from
+ *	PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
+ *
+ *	gclk	  CPU clock (not bus clock!)
+ *	Trefresh  Refresh cycle * 4 (four word bursts used)
+ *
+ * 4096  Rows from SDRAM example configuration
+ * 1000  factor s -> ms
+ *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
+ *    4  Number of refresh cycles per period
+ *   64  Refresh cycle in ms per number of rows
+ * --------------------------------------------
+ * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
+ *
+ * 50 MHz => 50.000.000 / Divider =  98
+ * 66 Mhz => 66.000.000 / Divider = 129
+ * 80 Mhz => 80.000.000 / Divider = 156
  */
 
-/* periodic timer for refresh */
-#define CFG_MAMR_PTA	97		/* start with divider for 100 MHz	*/
+#define CFG_PTA_PER_CLK	((4096 * 32 * 1000) / (4 * 64))
+#define CFG_MAMR_PTA	98
 
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
+/*
+ * For 16 MBit, refresh rates could be 31.3 us
+ * (= 64 ms / 2K = 125 / quad bursts).
+ * For a simpler initialization, 15.6 us is used instead.
+ *
+ * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ */
 #define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
 #define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
 
@@ -372,4 +433,6 @@
 #define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
+#define CONFIG_SCC1_ENET
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/NSCU.h b/include/configs/NSCU.h
index 11e5c63..21d90c3 100644
--- a/include/configs/NSCU.h
+++ b/include/configs/NSCU.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -67,9 +67,16 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/NSCU/uImage\0"				\
+	"hostname=NSCU\0"						\
+	"bootfile=${hostname}/uImage\0"					\
 	"kernel_addr=40080000\0"					\
 	"ramdisk_addr=40180000\0"					\
+	"u-boot=${hostname}/u-image.bin\0"				\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -110,20 +117,24 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
 
+#define CONFIG_NETCONSOLE
+
+
 /*
  * Miscellaneous configurable options
  */
 #define	CFG_LONGHELP			/* undef to save memory		*/
 #define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
-#if 0
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history
+*/
 #define	CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
-#endif
 #ifdef	CFG_HUSH_PARSER
 #define	CFG_PROMPT_HUSH_PS2	"> "
 #endif
@@ -186,21 +197,26 @@
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	71	/* max number of sectors on one chip */
 
 #define	CFG_ENV_IS_IN_FLASH	1
-#define	CFG_ENV_OFFSET		0x40000	/*   Offset   of Environment Sector	*/
-#define	CFG_ENV_SIZE		0x08000	/* Total Size of Environment Sector	*/
-#define	CFG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment Sector	*/
+#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
+#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
+#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h
index d5a3c54..f807271 100644
--- a/include/configs/TQM823L.h
+++ b/include/configs/TQM823L.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -71,10 +71,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM823L/uImage\0"				\
+	"hostname=TQM823L\0"						\
+	"bootfile=TQM823L/uImage\0"					\
 	"fdt_addr=40040000\0"						\
 	"kernel_addr=40060000\0"					\
 	"ramdisk_addr=40200000\0"					\
+	"u-boot=TQM823L/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -115,7 +122,9 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
@@ -124,6 +133,8 @@
 #endif
 
 
+#define CONFIG_NETCONSOLE
+
 /*
  * Miscellaneous configurable options
  */
@@ -215,6 +226,18 @@
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\
+						"128k(dtb),"		\
+						"1664k(kernel),"	\
+						"2m(rootfs),"		\
+						"4m(data)"	
+
+/*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h
index 40dc26b..431ae8c 100644
--- a/include/configs/TQM823M.h
+++ b/include/configs/TQM823M.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -69,10 +69,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM823M/uImage\0"				\
+	"hostname=TQM823M\0"						\
+	"bootfile=TQM823M/uImage\0"					\
 	"fdt_addr=40080000\0"						\
 	"kernel_addr=400A0000\0"					\
 	"ramdisk_addr=40280000\0"					\
+	"u-boot=TQM823M/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -113,11 +120,16 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
 
+#define CONFIG_NETCONSOLE
+
+
 /*
  * Miscellaneous configurable options
  */
@@ -210,6 +222,18 @@
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxM-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxM-0:512k(u-boot),"	\
+						"128k(dtb),"		\
+						"1920k(kernel),"	\
+						"5632(rootfs),"		\
+						"4m(data)"	
+
+/*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h
index 17afa89..7946c13 100644
--- a/include/configs/TQM850L.h
+++ b/include/configs/TQM850L.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -65,10 +65,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM850L/uImage\0"				\
+	"hostname=TQM850L\0"						\
+	"bootfile=TQM850L/uImage\0"					\
 	"fdt_addr=40040000\0"						\
 	"kernel_addr=40060000\0"					\
 	"ramdisk_addr=40200000\0"					\
+	"u-boot=TQM850L/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -104,11 +111,15 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
 
+#define CONFIG_NETCONSOLE
+
 /*
  * Miscellaneous configurable options
  */
@@ -200,6 +211,18 @@
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\
+						"128k(dtb),"		\
+						"1664k(kernel),"	\
+						"2m(rootfs),"		\
+						"4m(data)"	
+
+/*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h
index becf82c..777776d 100644
--- a/include/configs/TQM850M.h
+++ b/include/configs/TQM850M.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -63,10 +63,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM850M/uImage\0"				\
+	"hostname=TQM850M\0"						\
+	"bootfile=TQM850M/uImage\0"					\
 	"fdt_addr=40080000\0"						\
 	"kernel_addr=400A0000\0"					\
 	"ramdisk_addr=40280000\0"					\
+	"u-boot=TQM850M/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -102,11 +109,16 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
 
+#define CONFIG_NETCONSOLE
+
+
 /*
  * Miscellaneous configurable options
  */
@@ -199,6 +211,18 @@
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxM-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxM-0:512k(u-boot),"	\
+						"128k(dtb),"		\
+						"1920k(kernel),"	\
+						"5632(rootfs),"		\
+						"4m(data)"	
+
+/*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h
index 73d6583..0549cbd 100644
--- a/include/configs/TQM855L.h
+++ b/include/configs/TQM855L.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -68,10 +68,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM855L/uImage\0"				\
+	"hostname=TQM855L\0"						\
+	"bootfile=TQM855L/uImage\0"					\
 	"fdt_addr=40040000\0"						\
 	"kernel_addr=40060000\0"					\
 	"ramdisk_addr=40200000\0"					\
+	"u-boot=TQM855L/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -108,11 +115,16 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
 
+#define CONFIG_NETCONSOLE
+
+
 /*
  * Miscellaneous configurable options
  */
@@ -204,6 +216,18 @@
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\
+						"128k(dtb),"		\
+						"1664k(kernel),"	\
+						"2m(rootfs),"		\
+						"4m(data)"	
+
+/*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h
index 2696ea5..bc092b7 100644
--- a/include/configs/TQM855M.h
+++ b/include/configs/TQM855M.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -68,10 +68,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM855M/uImage\0"				\
+	"hostname=TQM855M\0"						\
+	"bootfile=TQM855M/uImage\0"					\
 	"fdt_addr=40080000\0"						\
 	"kernel_addr=400A0000\0"					\
 	"ramdisk_addr=40280000\0"					\
+	"u-boot=TQM855M/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -141,12 +148,17 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
 
+#define CONFIG_NETCONSOLE
+
+
 /*
  * Miscellaneous configurable options
  */
@@ -239,6 +251,18 @@
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxM-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxM-0:512k(u-boot),"	\
+						"128k(dtb),"		\
+						"1920k(kernel),"	\
+						"5632(rootfs),"		\
+						"4m(data)"	
+
+/*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h
index 576e3e2..065156f 100644
--- a/include/configs/TQM860L.h
+++ b/include/configs/TQM860L.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -68,10 +68,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM860L/uImage\0"				\
+	"hostname=TQM860L\0"						\
+	"bootfile=TQM860L/uImage\0"					\
 	"fdt_addr=40040000\0"						\
 	"kernel_addr=40060000\0"					\
 	"ramdisk_addr=40200000\0"					\
+	"u-boot=TQM860L/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -110,6 +117,7 @@
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
@@ -207,6 +215,18 @@
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\
+						"128k(dtb),"		\
+						"1664k(kernel),"	\
+						"2m(rootfs),"		\
+						"4m(data)"	
+
+/*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h
index 00b7853..ff610bf 100644
--- a/include/configs/TQM860M.h
+++ b/include/configs/TQM860M.h
@@ -68,15 +68,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM860M/uImage\0"				\
+	"hostname=TQM860M\0"						\
+	"bootfile=TQM860M/uImage\0"					\
 	"fdt_addr=400C0000\0"						\
 	"kernel_addr=40100000\0"					\
 	"ramdisk_addr=40280000\0"					\
+	"u-boot=TQM860M/u-image.bin\0"					\
 	"load=tftp 200000 ${u-boot}\0"					\
-	"update=protect off 40000000 +${filesize};"			\
-		"erase 40000000 +${filesize};"				\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
 		"cp.b 200000 40000000 ${filesize};"			\
-		"protect on 40000000 +${filesize}\0"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -115,10 +117,14 @@
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
 
+#define CONFIG_NETCONSOLE
+
+
 /*
  * Miscellaneous configurable options
  */
@@ -210,6 +216,18 @@
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxM-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxM-0:512k(u-boot),"	\
+						"128k(dtb),"		\
+						"1920k(kernel),"	\
+						"5632(rootfs),"		\
+						"4m(data)"	
+
+/*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h
index 6d2f91b..33ff8a9 100644
--- a/include/configs/TQM862L.h
+++ b/include/configs/TQM862L.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2005
+ * (C) Copyright 2000-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -71,10 +71,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM862L/uImage\0"				\
+	"hostname=TQM862L\0"						\
+	"bootfile=TQM862L/uImage\0"					\
 	"fdt_addr=40040000\0"						\
 	"kernel_addr=40060000\0"					\
 	"ramdisk_addr=40200000\0"					\
+	"u-boot=TQM862L/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -111,11 +118,16 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
 
+#define CONFIG_NETCONSOLE
+
+
 /*
  * Miscellaneous configurable options
  */
@@ -207,6 +219,18 @@
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\
+						"128k(dtb),"		\
+						"1664k(kernel),"	\
+						"2m(rootfs),"		\
+						"4m(data)"	
+
+/*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h
index 05395e0..1ec4431 100644
--- a/include/configs/TQM862M.h
+++ b/include/configs/TQM862M.h
@@ -71,10 +71,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM862M/uImage\0"				\
+	"hostname=TQM862M\0"						\
+	"bootfile=TQM862M/uImage\0"					\
 	"fdt_addr=40080000\0"						\
 	"kernel_addr=400A0000\0"					\
 	"ramdisk_addr=40280000\0"					\
+	"u-boot=TQM862M/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -111,11 +118,16 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
 
+#define CONFIG_NETCONSOLE
+
+
 /*
  * Miscellaneous configurable options
  */
@@ -208,6 +220,18 @@
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxM-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxM-0:512k(u-boot),"	\
+						"128k(dtb),"		\
+						"1920k(kernel),"	\
+						"5632(rootfs),"		\
+						"4m(data)"	
+
+/*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h
index d033875..0cee9f4 100644
--- a/include/configs/TQM866M.h
+++ b/include/configs/TQM866M.h
@@ -80,15 +80,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM866M/uImage\0"				\
+	"hostname=TQM866M\0"						\
+	"bootfile=TQM866M/uImage\0"					\
 	"fdt_addr=400C0000\0"						\
 	"kernel_addr=40100000\0"					\
 	"ramdisk_addr=40280000\0"					\
+	"u-boot=TQM866M/u-image.bin\0"					\
 	"load=tftp 200000 ${u-boot}\0"					\
-	"update=protect off 40000000 +${filesize};"			\
-		"erase 40000000 +${filesize};"				\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
 		"cp.b 200000 40000000 ${filesize};"			\
-		"protect on 40000000 +${filesize}\0"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -157,9 +159,14 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
+#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
+
+#define CONFIG_NETCONSOLE
 
 
 /*
@@ -253,6 +260,18 @@
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxM-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxM-0:512k(u-boot),"	\
+						"128k(dtb),"		\
+						"1920k(kernel),"	\
+						"5632(rootfs),"		\
+						"4m(data)"	
+
+/*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h
index 6bb075d..54d9421 100644
--- a/include/configs/virtlab2.h
+++ b/include/configs/virtlab2.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2006
+ * (C) Copyright 2006-2008
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -37,10 +37,6 @@
 #define CONFIG_VIRTLAB2		1	/* ...on a virtlab2 module	*/
 #define	CONFIG_TQM8xxL		1
 
-#ifdef	CONFIG_LCD			/* with LCD controller ?	*/
-#define	CONFIG_SPLASH_SCREEN		/* ... with splashscreen support*/
-#endif
-
 #define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
 #undef	CONFIG_8xx_CONS_SMC2
 #undef	CONFIG_8xx_CONS_NONE
@@ -70,9 +66,17 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM823L/uImage\0"				\
-	"kernel_addr=40040000\0"					\
-	"ramdisk_addr=40100000\0"					\
+	"hostname=virtlab2\0"						\
+	"bootfile=virtlab2/uImage\0"					\
+	"fdt_addr=40040000\0"						\
+	"kernel_addr=40060000\0"					\
+	"ramdisk_addr=40200000\0"					\
+	"u-boot=virtlab2/u-image.bin\0"					\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"update=prot off 40000000 +${filesize};"			\
+		"era 40000000 +${filesize};"				\
+		"cp.b 200000 40000000 ${filesize};"			\
+		"sete filesize;save\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -114,6 +118,7 @@
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
@@ -122,15 +127,16 @@
 #endif
 
 
+#define CONFIG_NETCONSOLE
+
 /*
  * Miscellaneous configurable options
  */
 #define	CFG_LONGHELP			/* undef to save memory		*/
 #define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
 
-#if 0
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
 #define	CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
-#endif
 #ifdef	CFG_HUSH_PARSER
 #define	CFG_PROMPT_HUSH_PS2	"> "
 #endif
@@ -197,7 +203,7 @@
 /* use CFI flash driver */
 #define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE, CFG_FLASH_BASE+flash_info[0].size }
 #define CFG_FLASH_EMPTY_INFO
 #define CFG_FLASH_USE_BUFFER_WRITE	1
 #define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
@@ -214,6 +220,18 @@
 #define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
+ * Dynamic MTD partition support
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM8xxL-0"
+
+#define MTDPARTS_DEFAULT	"mtdparts=TQM8xxL-0:256k(u-boot),"	\
+						"128k(dtb),"		\
+						"1664k(kernel),"	\
+						"2m(rootfs),"		\
+						"4m(data)"	
+
+/*-----------------------------------------------------------------------
  * Hardware Information Block
  */
 #define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-- 
cgit v1.1


From 0bf202ec586d4466c900e987720fa635c594d689 Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@denx.de>
Date: Sun, 10 Aug 2008 01:26:26 +0200
Subject: Revert "[new uImage] Add autostart flag to bootm_headers structure"

This reverts commit f5614e7926863bf0225ec860d9b319741a9c4004.

The commit was based on a misunderstanding of the (documented)
meaning of the 'autostart' environment variable. It might cause
boards to hang if 'autostart' was used, with the potential to brick
them. Go back to the documented behaviour.

Conflicts:

	common/cmd_bootm.c
	common/image.c
	include/image.h

Signed-off-by: Wolfgang Denk <wd@denx.de>
---
 include/image.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'include')

diff --git a/include/image.h b/include/image.h
index 46138fa..4b9c582 100644
--- a/include/image.h
+++ b/include/image.h
@@ -220,7 +220,6 @@ typedef struct bootm_headers {
 #endif
 
 	int		verify;		/* getenv("verify")[0] != 'n' */
-	int		autostart;	/* getenv("autostart")[0] != 'n' */
 	struct lmb	*lmb;		/* for memory mgmt */
 } bootm_headers_t;
 
-- 
cgit v1.1


From b6b183c5b2fffd4c456b7e3fcb064cceb47fe7ac Mon Sep 17 00:00:00 2001
From: Magnus Lilja <lilja.magnus@gmail.com>
Date: Sun, 3 Aug 2008 21:43:37 +0200
Subject: i.MX31: Fix IOMUX related typos

Correct the names of some IOMUX macros.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
---
 include/asm-arm/arch-mx31/mx31-regs.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'include')

diff --git a/include/asm-arm/arch-mx31/mx31-regs.h b/include/asm-arm/arch-mx31/mx31-regs.h
index 02b7dcb..abe61f0 100644
--- a/include/asm-arm/arch-mx31/mx31-regs.h
+++ b/include/asm-arm/arch-mx31/mx31-regs.h
@@ -133,10 +133,10 @@
 #define MUX_RXD1__UART1_RXD_MUX	((MUX_CTL_FUNC << 8) | MUX_CTL_RXD1)
 #define MUX_TXD1__UART1_TXD_MUX	((MUX_CTL_FUNC << 8) | MUX_CTL_TXD1)
 #define MUX_RTS1__UART1_RTS_B	((MUX_CTL_FUNC << 8) | MUX_CTL_RTS1)
-#define MUX_RTS1__UART1_CTS_B	((MUX_CTL_FUNC << 8) | MUX_CTL_CTS1)
+#define MUX_CTS1__UART1_CTS_B	((MUX_CTL_FUNC << 8) | MUX_CTL_CTS1)
 
 #define MUX_CSPI2_MOSI__I2C2_SCL ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MOSI)
-#define MUX_CSPI2_MISO__I2C2_SCL ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MISO)
+#define MUX_CSPI2_MISO__I2C2_SDA ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MISO)
 
 /*
  * Memory regions and CS
-- 
cgit v1.1


From 5276a3584d26a9533404f0ec00c3b61cf9a97939 Mon Sep 17 00:00:00 2001
From: Magnus Lilja <lilja.magnus@gmail.com>
Date: Sun, 3 Aug 2008 21:44:10 +0200
Subject: i.MX31: Fix mx31_gpio_mux() function and MUX_-macros.

Correct the mx31_gpio_mux() function to allow changing all i.MX31 IOMUX
contacts instead of only the first 256 ones as is the case prior to
this patch.

Add missing MUX_* macros and update board files to use the new macros.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
---
 include/asm-arm/arch-mx31/mx31-regs.h | 33 ++++++++++++++++++++++++---------
 1 file changed, 24 insertions(+), 9 deletions(-)

(limited to 'include')

diff --git a/include/asm-arm/arch-mx31/mx31-regs.h b/include/asm-arm/arch-mx31/mx31-regs.h
index abe61f0..b04a718 100644
--- a/include/asm-arm/arch-mx31/mx31-regs.h
+++ b/include/asm-arm/arch-mx31/mx31-regs.h
@@ -126,17 +126,32 @@
 #define MUX_CTL_CSPI2_SS2	0x87
 #define MUX_CTL_CSPI2_MOSI	0x8b
 
-/* The modes a specific pin can be in
- * these macros can be used in mx31_gpio_mux() and have the form
- * MUX_[contact name]__[pin function]
+/*
+ * Helper macros for the MUX_[contact name]__[pin function] macros
  */
-#define MUX_RXD1__UART1_RXD_MUX	((MUX_CTL_FUNC << 8) | MUX_CTL_RXD1)
-#define MUX_TXD1__UART1_TXD_MUX	((MUX_CTL_FUNC << 8) | MUX_CTL_TXD1)
-#define MUX_RTS1__UART1_RTS_B	((MUX_CTL_FUNC << 8) | MUX_CTL_RTS1)
-#define MUX_CTS1__UART1_CTS_B	((MUX_CTL_FUNC << 8) | MUX_CTL_CTS1)
+#define IOMUX_MODE_POS 9
+#define IOMUX_MODE(contact, mode) (((mode) << IOMUX_MODE_POS) | (contact))
 
-#define MUX_CSPI2_MOSI__I2C2_SCL ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MOSI)
-#define MUX_CSPI2_MISO__I2C2_SDA ((MUX_CTL_ALT1 << 8) | MUX_CTL_CSPI2_MISO)
+/*
+ * These macros can be used in mx31_gpio_mux() and have the form
+ * MUX_[contact name]__[pin function]
+ */
+#define MUX_RXD1__UART1_RXD_MUX	IOMUX_MODE(MUX_CTL_RXD1, MUX_CTL_FUNC)
+#define MUX_TXD1__UART1_TXD_MUX	IOMUX_MODE(MUX_CTL_TXD1, MUX_CTL_FUNC)
+#define MUX_RTS1__UART1_RTS_B	IOMUX_MODE(MUX_CTL_RTS1, MUX_CTL_FUNC)
+#define MUX_CTS1__UART1_CTS_B	IOMUX_MODE(MUX_CTL_CTS1, MUX_CTL_FUNC)
+
+#define MUX_CSPI2_SS0__CSPI2_SS0_B IOMUX_MODE(MUX_CTL_CSPI2_SS0, MUX_CTL_FUNC)
+#define MUX_CSPI2_SS1__CSPI2_SS1_B IOMUX_MODE(MUX_CTL_CSPI2_SS1, MUX_CTL_FUNC)
+#define MUX_CSPI2_SS2__CSPI2_SS2_B IOMUX_MODE(MUX_CTL_CSPI2_SS2, MUX_CTL_FUNC)
+#define MUX_CSPI2_MOSI__CSPI2_MOSI IOMUX_MODE(MUX_CTL_CSPI2_MOSI, MUX_CTL_FUNC)
+#define MUX_CSPI2_MISO__CSPI2_MISO IOMUX_MODE(MUX_CTL_CSPI2_MISO, MUX_CTL_FUNC)
+#define MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B \
+	IOMUX_MODE(MUX_CTL_CSPI2_SPI_RDY, MUX_CTL_FUNC)
+#define MUX_CSPI2_SCLK__CSPI2_CLK IOMUX_MODE(MUX_CTL_CSPI2_SCLK, MUX_CTL_FUNC)
+
+#define MUX_CSPI2_MOSI__I2C2_SCL IOMUX_MODE(MUX_CTL_CSPI2_MOSI, MUX_CTL_ALT1)
+#define MUX_CSPI2_MISO__I2C2_SDA IOMUX_MODE(MUX_CTL_CSPI2_MISO, MUX_CTL_ALT1)
 
 /*
  * Memory regions and CS
-- 
cgit v1.1


From 23f935c073e7578c6066804fd2f9ee116cae6ffe Mon Sep 17 00:00:00 2001
From: Becky Bruce <becky.bruce@freescale.com>
Date: Mon, 4 Aug 2008 14:01:16 -0500
Subject: POWERPC: 86xx - add missing CONFIG_HIGH_BATS to sbc8641d config

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
---
 include/configs/sbc8641d.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'include')

diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
index 3cd9ff8..ebfcb46 100644
--- a/include/configs/sbc8641d.h
+++ b/include/configs/sbc8641d.h
@@ -58,6 +58,8 @@
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 
+#define CONFIG_HIGH_BATS	1	/* High BATs supported and enabled */
+
 #undef CONFIG_SPD_EEPROM		/* Do not use SPD EEPROM for DDR setup*/
 #undef CONFIG_DDR_DLL			/* possible DLL fix needed */
 #define CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
-- 
cgit v1.1


From 17e900b8c0f38d922da47073246219dce2a847f2 Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@denx.de>
Date: Tue, 12 Aug 2008 14:54:04 +0200
Subject: MVBC_P: fix compile problem

Signed-off-by: Wolfgang Denk <wd@denx.de>
---
 include/configs/MVBC_P.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'include')

diff --git a/include/configs/MVBC_P.h b/include/configs/MVBC_P.h
index 8c8a445..2c27b97 100644
--- a/include/configs/MVBC_P.h
+++ b/include/configs/MVBC_P.h
@@ -40,7 +40,7 @@
 #define CONFIG_MISC_INIT_R	1
 
 #define CFG_CACHELINE_SIZE	32
-#ifdef (CONFIG_CMD_KGDB)
+#ifdef CONFIG_CMD_KGDB
 #define CFG_CACHELINE_SHIFT	5
 #endif
 
@@ -268,7 +268,7 @@
 #define CFG_PROMPT_HUSH_PS2 	"> "
 #undef 	CFG_LONGHELP
 #define CFG_PROMPT		"=> "
-#ifdef (CONFIG_CMD_KGDB)
+#ifdef CONFIG_CMD_KGDB
 #define CFG_CBSIZE		1024
 #else
 #define CFG_CBSIZE		256
-- 
cgit v1.1


From cd82919e6c8a73b363a26f34b734923844e52d1c Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@denx.de>
Date: Tue, 12 Aug 2008 16:08:38 +0200
Subject: Coding style cleanup, update CHANGELOG, prepare release

Signed-off-by: Wolfgang Denk <wd@denx.de>
---
 include/configs/FPS850L.h  | 2 +-
 include/configs/FPS860L.h  | 2 +-
 include/configs/TQM823L.h  | 2 +-
 include/configs/TQM823M.h  | 2 +-
 include/configs/TQM850L.h  | 2 +-
 include/configs/TQM850M.h  | 2 +-
 include/configs/TQM855L.h  | 2 +-
 include/configs/TQM855M.h  | 2 +-
 include/configs/TQM860L.h  | 2 +-
 include/configs/TQM860M.h  | 2 +-
 include/configs/TQM862L.h  | 2 +-
 include/configs/TQM862M.h  | 2 +-
 include/configs/TQM866M.h  | 2 +-
 include/configs/virtlab2.h | 2 +-
 14 files changed, 14 insertions(+), 14 deletions(-)

(limited to 'include')

diff --git a/include/configs/FPS850L.h b/include/configs/FPS850L.h
index 66db296..79b71db 100644
--- a/include/configs/FPS850L.h
+++ b/include/configs/FPS850L.h
@@ -221,7 +221,7 @@
 						"128k(dtb),"		\
 						"1664k(kernel),"	\
 						"2m(rootfs),"		\
-						"4m(data)"	
+						"4m(data)"
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h
index 84607cc..ec757e2 100644
--- a/include/configs/FPS860L.h
+++ b/include/configs/FPS860L.h
@@ -221,7 +221,7 @@
 						"128k(dtb),"		\
 						"1664k(kernel),"	\
 						"2m(rootfs),"		\
-						"4m(data)"	
+						"4m(data)"
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h
index f807271..9cc1964 100644
--- a/include/configs/TQM823L.h
+++ b/include/configs/TQM823L.h
@@ -235,7 +235,7 @@
 						"128k(dtb),"		\
 						"1664k(kernel),"	\
 						"2m(rootfs),"		\
-						"4m(data)"	
+						"4m(data)"
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h
index 431ae8c..5edd379 100644
--- a/include/configs/TQM823M.h
+++ b/include/configs/TQM823M.h
@@ -231,7 +231,7 @@
 						"128k(dtb),"		\
 						"1920k(kernel),"	\
 						"5632(rootfs),"		\
-						"4m(data)"	
+						"4m(data)"
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h
index 7946c13..9edf0d8 100644
--- a/include/configs/TQM850L.h
+++ b/include/configs/TQM850L.h
@@ -220,7 +220,7 @@
 						"128k(dtb),"		\
 						"1664k(kernel),"	\
 						"2m(rootfs),"		\
-						"4m(data)"	
+						"4m(data)"
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h
index 777776d..e2c1ce8 100644
--- a/include/configs/TQM850M.h
+++ b/include/configs/TQM850M.h
@@ -220,7 +220,7 @@
 						"128k(dtb),"		\
 						"1920k(kernel),"	\
 						"5632(rootfs),"		\
-						"4m(data)"	
+						"4m(data)"
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h
index 0549cbd..dd19d4e 100644
--- a/include/configs/TQM855L.h
+++ b/include/configs/TQM855L.h
@@ -225,7 +225,7 @@
 						"128k(dtb),"		\
 						"1664k(kernel),"	\
 						"2m(rootfs),"		\
-						"4m(data)"	
+						"4m(data)"
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h
index bc092b7..8a1c350 100644
--- a/include/configs/TQM855M.h
+++ b/include/configs/TQM855M.h
@@ -260,7 +260,7 @@
 						"128k(dtb),"		\
 						"1920k(kernel),"	\
 						"5632(rootfs),"		\
-						"4m(data)"	
+						"4m(data)"
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h
index 065156f..803cdb8 100644
--- a/include/configs/TQM860L.h
+++ b/include/configs/TQM860L.h
@@ -224,7 +224,7 @@
 						"128k(dtb),"		\
 						"1664k(kernel),"	\
 						"2m(rootfs),"		\
-						"4m(data)"	
+						"4m(data)"
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h
index ff610bf..071da1e 100644
--- a/include/configs/TQM860M.h
+++ b/include/configs/TQM860M.h
@@ -225,7 +225,7 @@
 						"128k(dtb),"		\
 						"1920k(kernel),"	\
 						"5632(rootfs),"		\
-						"4m(data)"	
+						"4m(data)"
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h
index 33ff8a9..d34f6be 100644
--- a/include/configs/TQM862L.h
+++ b/include/configs/TQM862L.h
@@ -228,7 +228,7 @@
 						"128k(dtb),"		\
 						"1664k(kernel),"	\
 						"2m(rootfs),"		\
-						"4m(data)"	
+						"4m(data)"
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h
index 1ec4431..9270e44 100644
--- a/include/configs/TQM862M.h
+++ b/include/configs/TQM862M.h
@@ -229,7 +229,7 @@
 						"128k(dtb),"		\
 						"1920k(kernel),"	\
 						"5632(rootfs),"		\
-						"4m(data)"	
+						"4m(data)"
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h
index 0cee9f4..d916d53 100644
--- a/include/configs/TQM866M.h
+++ b/include/configs/TQM866M.h
@@ -269,7 +269,7 @@
 						"128k(dtb),"		\
 						"1920k(kernel),"	\
 						"5632(rootfs),"		\
-						"4m(data)"	
+						"4m(data)"
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h
index 54d9421..f104886 100644
--- a/include/configs/virtlab2.h
+++ b/include/configs/virtlab2.h
@@ -229,7 +229,7 @@
 						"128k(dtb),"		\
 						"1664k(kernel),"	\
 						"2m(rootfs),"		\
-						"4m(data)"	
+						"4m(data)"
 
 /*-----------------------------------------------------------------------
  * Hardware Information Block
-- 
cgit v1.1