From 78e5699523ca305e55813683e4e30257c900458d Mon Sep 17 00:00:00 2001
From: York Sun <york.sun@nxp.com>
Date: Mon, 21 Nov 2016 11:25:26 -0800
Subject: powerpc: T104xRDB: Remove macro CONFIG_T104xRDB and T104xD4RDB

CONFIG_T104xRDB is defined in T104xRDB.h, so it is always enabled for
all T1040RDB, T1040D4RDB, T1042RDB, T1042D4RDB, T1042RDB_PI.
CONFIG_T104XD4RDB is defined for all T1040D4RDB, T1042D4RDB.

Signed-off-by: York Sun <york.sun@nxp.com>
---
 include/configs/T104xRDB.h | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

(limited to 'include')

diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 5d013f1..ed568f3 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -10,8 +10,6 @@
 /*
  * T104x RDB board configuration file
  */
-#define CONFIG_T104xRDB
-
 #define CONFIG_E500			/* BOOKE e500 family */
 #include <asm/config_mpc85xx.h>
 
@@ -547,11 +545,11 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 
 /* I2C bus multiplexer */
 #define I2C_MUX_PCA_ADDR                0x70
-#if defined(CONFIG_T104xRDB) || defined(CONFIG_T104XD4RDB)
 #define I2C_MUX_CH_DEFAULT      0x8
-#endif
 
-#if defined(CONFIG_TARGET_T1042RDB_PI) || defined(CONFIG_T104XD4RDB)
+#if defined(CONFIG_TARGET_T1042RDB_PI)	|| \
+	defined(CONFIG_TARGET_T1040D4RDB)	|| \
+	defined(CONFIG_TARGET_T1042D4RDB)
 /* LDI/DVI Encoder for display */
 #define CONFIG_SYS_I2C_LDI_ADDR		0x38
 #define CONFIG_SYS_I2C_DVI_ADDR		0x75
@@ -706,10 +704,8 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_DPAA_PME
 
-#if defined(CONFIG_T104xRDB) || defined(CONFIG_T104XD4RDB)
 #define CONFIG_QE
 #define CONFIG_U_QE
-#endif
 
 /* Default address of microcode for the Linux Fman driver */
 #if defined(CONFIG_SPIFLASH)
@@ -735,7 +731,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_SYS_FMAN_FW_ADDR		0xEFF00000
 #endif
 
-#if defined(CONFIG_T104xRDB) || defined(CONFIG_T104XD4RDB)
 #if defined(CONFIG_SPIFLASH)
 #define CONFIG_SYS_QE_FW_ADDR		0x130000
 #elif defined(CONFIG_SDCARD)
@@ -745,7 +740,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #else
 #define CONFIG_SYS_QE_FW_ADDR		0xEFF10000
 #endif
-#endif
 
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
@@ -768,7 +762,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CONFIG_SYS_SGMII3_PHY_ADDR             0x01
 #endif
 
-#ifdef CONFIG_T104XD4RDB
+#if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB)
 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x04
 #define CONFIG_SYS_RGMII2_PHY_ADDR             0x05
 #else
-- 
cgit v1.1