From 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 6 Jun 2007 16:26:56 +0200 Subject: Coding Style cleanup; generate new CHANGELOG file. Signed-off-by: Wolfgang Denk --- include/configs/SMN42.h | 18 +++++++++--------- include/configs/TB5200.h | 2 +- include/configs/aev.h | 2 +- include/configs/lpc2292sodimm.h | 13 ++++++------- include/configs/spieval.h | 2 +- 5 files changed, 18 insertions(+), 19 deletions(-) (limited to 'include') diff --git a/include/configs/SMN42.h b/include/configs/SMN42.h index 1d2f28d..d588818 100755 --- a/include/configs/SMN42.h +++ b/include/configs/SMN42.h @@ -42,7 +42,7 @@ #define CONFIG_ARM7 1 /* This is a ARM7 CPU */ #define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */ #define CONFIG_LPC2292 -#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */ +#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */ #undef CONFIG_USE_IRQ /* don't need them anymore */ @@ -66,10 +66,10 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) /* enable I2C and select the hardware/software driver */ -#undef CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_HARD_I2C /* I2C with hardware support */ #define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ /* this would be 0xAE if E0, E1 and E2 were pulled high */ #define CFG_I2C_SLAVE 0xA0 @@ -92,11 +92,11 @@ #define I2C_SCL(x) { if (x) PUT32(IO0SET, SCL); else PUT32(IO0CLR, SCL); } #define I2C_DELAY { udelay(100); } #define I2C_ACTIVE { unsigned int i2ctmp; \ - i2ctmp = GET32(IO0DIR); \ + i2ctmp = GET32(IO0DIR); \ i2ctmp |= SDA; \ PUT32(IO0DIR, i2ctmp); } #define I2C_TRISTATE { unsigned int i2ctmp; \ - i2ctmp = GET32(IO0DIR); \ + i2ctmp = GET32(IO0DIR); \ i2ctmp &= ~SDA; \ PUT32(IO0DIR, i2ctmp); } #endif /* CONFIG_SOFT_I2C */ @@ -132,12 +132,12 @@ #define CFG_MEMTEST_START 0x81800000 /* memtest works on */ #define CFG_MEMTEST_END 0x83000000 /* 24 MB in SRAM */ -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ -#define CFG_LOAD_ADDR 0x81000000 /* default load address - * for uClinux img is here*/ +#define CFG_LOAD_ADDR 0x81000000 /* default load address */ + /* for uClinux img is here*/ -#define CFG_SYS_CLK_FREQ 58982400 /* Hz */ +#define CFG_SYS_CLK_FREQ 58982400 /* Hz */ #define CFG_HZ 2048 /* decrementer freq in Hz */ /* valid baudrates */ diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h index b42cfb6..712668a 100644 --- a/include/configs/TB5200.h +++ b/include/configs/TB5200.h @@ -207,7 +207,7 @@ * PCI Bus clocking configuration * * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock + * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. */ #define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ diff --git a/include/configs/aev.h b/include/configs/aev.h index 6c2a360..f6f530c 100644 --- a/include/configs/aev.h +++ b/include/configs/aev.h @@ -173,7 +173,7 @@ * PCI Bus clocking configuration * * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock + * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. */ #define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h index 30e0b10..7b6c695 100755 --- a/include/configs/lpc2292sodimm.h +++ b/include/configs/lpc2292sodimm.h @@ -42,7 +42,7 @@ #define CONFIG_ARM7 1 /* This is a ARM7 CPU */ #define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */ #define CONFIG_LPC2292 -#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */ +#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */ #undef CONFIG_USE_IRQ /* don't need them anymore */ @@ -66,7 +66,7 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) /* * Supported commands @@ -99,13 +99,12 @@ #define CFG_MEMTEST_START 0x40000000 /* memtest works on */ #define CFG_MEMTEST_END 0x40000000 /* 4 ... 8 MB in DRAM */ -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ -#define CFG_LOAD_ADDR 0x00040000 /* default load address for - * armadillo: kernel img is here - */ +#define CFG_LOAD_ADDR 0x00040000 /* default load address for */ + /* armadillo: kernel img is here*/ -#define CFG_SYS_CLK_FREQ 58982400 /* Hz */ +#define CFG_SYS_CLK_FREQ 58982400 /* Hz */ #define CFG_HZ 2048 /* decrementer freq in Hz */ /* valid baudrates */ diff --git a/include/configs/spieval.h b/include/configs/spieval.h index fd138a5..9888d11 100644 --- a/include/configs/spieval.h +++ b/include/configs/spieval.h @@ -226,7 +226,7 @@ * PCI Bus clocking configuration * * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock + * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. */ #define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ -- cgit v1.1