From 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3 Mon Sep 17 00:00:00 2001 From: Gary Jennejohn Date: Wed, 24 Jan 2007 12:16:56 +0100 Subject: Add port for the lpc2292sodimm evaluation board from EmbeddedArtists --- include/asm-arm/arch-arm720t/hardware.h | 2 + include/asm-arm/arch-arm720t/lpc2292_registers.h | 225 +++++++++++++++++++++++ include/asm-arm/arch-arm720t/mmc.h | 22 +++ include/configs/lpc2292sodimm.h | 158 ++++++++++++++++ include/flash.h | 1 + 5 files changed, 408 insertions(+) create mode 100644 include/asm-arm/arch-arm720t/lpc2292_registers.h create mode 100644 include/asm-arm/arch-arm720t/mmc.h create mode 100644 include/configs/lpc2292sodimm.h (limited to 'include') diff --git a/include/asm-arm/arch-arm720t/hardware.h b/include/asm-arm/arch-arm720t/hardware.h index 3056ca7..1e9cd41 100644 --- a/include/asm-arm/arch-arm720t/hardware.h +++ b/include/asm-arm/arch-arm720t/hardware.h @@ -36,6 +36,8 @@ /* include armadillo specific hardware file if there was one */ #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) /* include IntegratorCP/CM720T specific hardware file if there was one */ +#elif defined(CONFIG_LPC2292) +#include #else #error No hardware file defined for this configuration #endif diff --git a/include/asm-arm/arch-arm720t/lpc2292_registers.h b/include/asm-arm/arch-arm720t/lpc2292_registers.h new file mode 100644 index 0000000..5715f3e --- /dev/null +++ b/include/asm-arm/arch-arm720t/lpc2292_registers.h @@ -0,0 +1,225 @@ +#ifndef __LPC2292_REGISTERS_H +#define __LPC2292_REGISTERS_H + +#include + +/* Macros for reading/writing registers */ +#define PUT8(reg, value) (*(volatile unsigned char*)(reg) = (value)) +#define PUT16(reg, value) (*(volatile unsigned short*)(reg) = (value)) +#define PUT32(reg, value) (*(volatile unsigned int*)(reg) = (value)) +#define GET8(reg) (*(volatile unsigned char*)(reg)) +#define GET16(reg) (*(volatile unsigned short*)(reg)) +#define GET32(reg) (*(volatile unsigned int*)(reg)) + +/* External Memory Controller */ + +#define BCFG0 0xFFE00000 /* 32-bits */ +#define BCFG1 0xFFE00004 /* 32-bits */ +#define BCFG2 0xFFE00008 /* 32-bits */ +#define BCFG3 0xFFE0000c /* 32-bits */ + +/* System Control Block */ + +#define EXTINT 0xE01FC140 +#define EXTWAKE 0xE01FC144 +#define EXTMODE 0xE01FC148 +#define EXTPOLAR 0xE01FC14C +#define MEMMAP 0xE01FC040 +#define PLLCON 0xE01FC080 +#define PLLCFG 0xE01FC084 +#define PLLSTAT 0xE01FC088 +#define PLLFEED 0xE01FC08C +#define PCON 0xE01FC0C0 +#define PCONP 0xE01FC0C4 +#define VPBDIV 0xE01FC100 + +/* Memory Acceleration Module */ + +#define MAMCR 0xE01FC000 +#define MAMTIM 0xE01FC004 + +/* Vectored Interrupt Controller */ + +#define VICIRQStatus 0xFFFFF000 +#define VICFIQStatus 0xFFFFF004 +#define VICRawIntr 0xFFFFF008 +#define VICIntSelect 0xFFFFF00C +#define VICIntEnable 0xFFFFF010 +#define VICIntEnClr 0xFFFFF014 +#define VICSoftInt 0xFFFFF018 +#define VICSoftIntClear 0xFFFFF01C +#define VICProtection 0xFFFFF020 +#define VICVectAddr 0xFFFFF030 +#define VICDefVectAddr 0xFFFFF034 +#define VICVectAddr0 0xFFFFF100 +#define VICVectAddr1 0xFFFFF104 +#define VICVectAddr2 0xFFFFF108 +#define VICVectAddr3 0xFFFFF10C +#define VICVectAddr4 0xFFFFF110 +#define VICVectAddr5 0xFFFFF114 +#define VICVectAddr6 0xFFFFF118 +#define VICVectAddr7 0xFFFFF11C +#define VICVectAddr8 0xFFFFF120 +#define VICVectAddr9 0xFFFFF124 +#define VICVectAddr10 0xFFFFF128 +#define VICVectAddr11 0xFFFFF12C +#define VICVectAddr12 0xFFFFF130 +#define VICVectAddr13 0xFFFFF134 +#define VICVectAddr14 0xFFFFF138 +#define VICVectAddr15 0xFFFFF13C +#define VICVectCntl0 0xFFFFF200 +#define VICVectCntl1 0xFFFFF204 +#define VICVectCntl2 0xFFFFF208 +#define VICVectCntl3 0xFFFFF20C +#define VICVectCntl4 0xFFFFF210 +#define VICVectCntl5 0xFFFFF214 +#define VICVectCntl6 0xFFFFF218 +#define VICVectCntl7 0xFFFFF21C +#define VICVectCntl8 0xFFFFF220 +#define VICVectCntl9 0xFFFFF224 +#define VICVectCntl10 0xFFFFF228 +#define VICVectCntl11 0xFFFFF22C +#define VICVectCntl12 0xFFFFF230 +#define VICVectCntl13 0xFFFFF234 +#define VICVectCntl14 0xFFFFF238 +#define VICVectCntl15 0xFFFFF23C + +/* Pin connect block */ + +#define PINSEL0 0xE002C000 /* 32 bits */ +#define PINSEL1 0xE002C004 /* 32 bits */ +#define PINSEL2 0xE002C014 /* 32 bits */ + +/* GPIO */ + +#define IO0PIN 0xE0028000 +#define IO0SET 0xE0028004 +#define IO0DIR 0xE0028008 +#define IO0CLR 0xE002800C +#define IO1PIN 0xE0028010 +#define IO1SET 0xE0028014 +#define IO1DIR 0xE0028018 +#define IO1CLR 0xE002801C +#define IO2PIN 0xE0028020 +#define IO2SET 0xE0028024 +#define IO2DIR 0xE0028028 +#define IO2CLR 0xE002802C +#define IO3PIN 0xE0028030 +#define IO3SET 0xE0028034 +#define IO3DIR 0xE0028038 +#define IO3CLR 0xE002803C + +/* Uarts */ + +#define U0RBR 0xE000C000 +#define U0THR 0xE000C000 +#define U0IER 0xE000C004 +#define U0IIR 0xE000C008 +#define U0FCR 0xE000C008 +#define U0LCR 0xE000C00C +#define U0LSR 0xE000C014 +#define U0SCR 0xE000C01C +#define U0DLL 0xE000C000 +#define U0DLM 0xE000C004 + +#define U1RBR 0xE0010000 +#define U1THR 0xE0010000 +#define U1IER 0xE0010004 +#define U1IIR 0xE0010008 +#define U1FCR 0xE0010008 +#define U1LCR 0xE001000C +#define U1MCR 0xE0010010 +#define U1LSR 0xE0010014 +#define U1MSR 0xE0010018 +#define U1SCR 0xE001001C +#define U1DLL 0xE0010000 +#define U1DLM 0xE0010004 + +/* I2C */ + +#define I2CONSET 0xE001C000 +#define I2STAT 0xE001C004 +#define I2DAT 0xE001C008 +#define I2ADR 0xE001C00C +#define I2SCLH 0xE001C010 +#define I2SCLL 0xE001C014 +#define I2CONCLR 0xE001C018 + +/* SPI */ + +#define S0SPCR 0xE0020000 +#define S0SPSR 0xE0020004 +#define S0SPDR 0xE0020008 +#define S0SPCCR 0xE002000C +#define S0SPINT 0xE002001C + +#define S1SPCR 0xE0030000 +#define S1SPSR 0xE0030004 +#define S1SPDR 0xE0030008 +#define S1SPCCR 0xE003000C +#define S1SPINT 0xE003001C + +/* CAN controller */ + +/* skip for now */ + +/* Timers */ + +#define T0IR 0xE0004000 +#define T0TCR 0xE0004004 +#define T0TC 0xE0004008 +#define T0PR 0xE000400C +#define T0PC 0xE0004010 +#define T0MCR 0xE0004014 +#define T0MR0 0xE0004018 +#define T0MR1 0xE000401C +#define T0MR2 0xE0004020 +#define T0MR3 0xE0004024 +#define T0CCR 0xE0004028 +#define T0CR0 0xE000402C +#define T0CR1 0xE0004030 +#define T0CR2 0xE0004034 +#define T0CR3 0xE0004038 +#define T0EMR 0xE000403C + +#define T1IR 0xE0008000 +#define T1TCR 0xE0008004 +#define T1TC 0xE0008008 +#define T1PR 0xE000800C +#define T1PC 0xE0008010 +#define T1MCR 0xE0008014 +#define T1MR0 0xE0008018 +#define T1MR1 0xE000801C +#define T1MR2 0xE0008020 +#define T1MR3 0xE0008024 +#define T1CCR 0xE0008028 +#define T1CR0 0xE000802C +#define T1CR1 0xE0008030 +#define T1CR2 0xE0008034 +#define T1CR3 0xE0008038 +#define T1EMR 0xE000803C + +/* PWM */ + +/* skip for now */ + +/* A/D converter */ + +/* skip for now */ + +/* Real Time Clock */ + +/* skip for now */ + +/* Watchdog */ + +#define WDMOD 0xE0000000 +#define WDTC 0xE0000004 +#define WDFEED 0xE0000008 +#define WDTV 0xE000000C + +/* EmbeddedICE LOGIC */ + +/* skip for now */ + +#endif diff --git a/include/asm-arm/arch-arm720t/mmc.h b/include/asm-arm/arch-arm720t/mmc.h new file mode 100644 index 0000000..e664a5f --- /dev/null +++ b/include/asm-arm/arch-arm720t/mmc.h @@ -0,0 +1,22 @@ +/* + * A dummy header file for use with the LPC2292 port to keep the + * compiler happy. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _MMC_ARM_TDM_H_ +#define _MMC_ARM_TDM_H_ +#endif /* _MMC_ARM_TDM_H_ */ diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h new file mode 100644 index 0000000..7e51523 --- /dev/null +++ b/include/configs/lpc2292sodimm.h @@ -0,0 +1,158 @@ +/* + * (C) Copyright 2000 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * Configuation settings for the EP7312 board. + * + * Modified to work on Armadillo HT1070 ARM720T board + * (C) Copyright 2005 Rowel Atienza rowel@diwalabs.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#undef CONFIG_INIT_CRITICAL /* undef for developing */ + +#undef CONFIG_SKIP_LOWLEVEL_INIT +#undef CONFIG_SKIP_RELOCATE_UBOOT + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM7 1 /* This is a ARM7 CPU */ +#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */ +#define CONFIG_LPC2292 +#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */ + +#undef CONFIG_USE_IRQ /* don't need them anymore */ + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 1 /* we use Serial line 1 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_DHCP | \ + CFG_CMD_FAT | \ + CFG_CMD_MMC | \ + CFG_CMD_NET | \ + CFG_CMD_PING) + +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +#define CONFIG_BOOTDELAY 5 + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "LPC2292SODIMM # " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x40000000 /* memtest works on */ +#define CFG_MEMTEST_END 0x40000000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0x00040000 /* default load address for armadillo: kernel img is here*/ + +#define CFG_SYS_CLK_FREQ 58982400 /* Hz */ +#define CFG_HZ 2048 /* decrementer freq in Hz */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x81000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x00800000 /* 8 MB SDRAM */ + +#define PHYS_FLASH_1 0x80000000 /* Flash Bank #1 */ +#define PHYS_FLASH_SIZE 0x00200000 /* 2 MB */ + +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 1024 /* max number of sectors on one chip */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR (0x0 + 0x3C000) /* Addr of Environment Sector */ +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_MMC 1 + +#endif /* __CONFIG_H */ diff --git a/include/flash.h b/include/flash.h index 8b7e824..55b6d8f 100644 --- a/include/flash.h +++ b/include/flash.h @@ -304,6 +304,7 @@ extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int of #define TOSH_ID_FVT160 0xC2 /* TC58FVT160 ID (16 M, top ) */ #define TOSH_ID_FVB160 0x43 /* TC58FVT160 ID (16 M, bottom ) */ +#define PHILIPS_LPC2292 0x0401FF13 /* LPC2292 internal FLASH */ /*----------------------------------------------------------------------- * Internal FLASH identification codes -- cgit v1.1