From 3163aaa63fced54bbd6fd190ece0f89b473076ab Mon Sep 17 00:00:00 2001 From: Jagannadha Sutradharudu Teki Date: Sat, 11 Jan 2014 15:13:11 +0530 Subject: sf: Add quad read/write commands support This patch add quad commands support like - QUAD_PAGE_PROGRAM => for write program - QUAD_OUTPUT_FAST ->> for read program Signed-off-by: Jagannadha Sutradharudu Teki --- include/spi.h | 9 ++++++++- include/spi_flash.h | 11 +++++++++-- 2 files changed, 17 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/spi.h b/include/spi.h index 31195a3..5dd490a 100644 --- a/include/spi.h +++ b/include/spi.h @@ -31,11 +31,16 @@ #define SPI_XFER_MMAP_END 0x10 /* Memory Mapped End */ #define SPI_XFER_ONCE (SPI_XFER_BEGIN | SPI_XFER_END) +/* SPI TX operation modes */ +#define SPI_OPM_TX_QPP 1 << 0 + /* SPI RX operation modes */ #define SPI_OPM_RX_AS 1 << 0 #define SPI_OPM_RX_DOUT 1 << 1 #define SPI_OPM_RX_DIO 1 << 2 -#define SPI_OPM_RX_EXTN SPI_OPM_RX_AS | SPI_OPM_RX_DOUT | SPI_OPM_RX_DIO +#define SPI_OPM_RX_QOF 1 << 3 +#define SPI_OPM_RX_EXTN SPI_OPM_RX_AS | SPI_OPM_RX_DOUT | \ + SPI_OPM_RX_DIO | SPI_OPM_RX_QOF /* Header byte that marks the start of the message */ #define SPI_PREAMBLE_END_BYTE 0xec @@ -50,6 +55,7 @@ * @bus: ID of the bus that the slave is attached to. * @cs: ID of the chip select connected to the slave. * @op_mode_rx: SPI RX operation mode. + * @op_mode_tx: SPI TX operation mode. * @wordlen: Size of SPI word in number of bits * @max_write_size: If non-zero, the maximum number of bytes which can * be written at once, excluding command bytes. @@ -59,6 +65,7 @@ struct spi_slave { unsigned int bus; unsigned int cs; u8 op_mode_rx; + u8 op_mode_tx; unsigned int wordlen; unsigned int max_write_size; void *memory_map; diff --git a/include/spi_flash.h b/include/spi_flash.h index 692e143..9fd9d3b 100644 --- a/include/spi_flash.h +++ b/include/spi_flash.h @@ -19,13 +19,18 @@ #include #include -/* Enum list - Extended read commands */ +/* No enum list for write commands only QPP */ +#define WR_QPP 1 << 4 + +/* Enum list - Full read commands */ enum spi_read_cmds { ARRAY_SLOW = 1 << 0, DUAL_OUTPUT_FAST = 1 << 1, DUAL_IO_FAST = 1 << 2, + QUAD_OUTPUT_FAST = 1 << 3, }; #define RD_EXTN ARRAY_SLOW | DUAL_OUTPUT_FAST | DUAL_IO_FAST +#define RD_FULL RD_EXTN | QUAD_OUTPUT_FAST /** * struct spi_flash - SPI flash structure @@ -41,7 +46,8 @@ enum spi_read_cmds { * @bank_curr: Current flash bank * @poll_cmd: Poll cmd - for flash erase/program * @erase_cmd: Erase cmd 4K, 32K, 64K - * @read_cmd: Read cmd - Array Fast and Extn read + * @read_cmd: Read cmd - Array Fast, Extn read and quad read. + * @write_cmd: Write cmd - page and quad program. * @memory_map: Address of read-only SPI flash access * @read: Flash read ops: Read len bytes at offset into buf * Supported cmds: Fast Array Read @@ -67,6 +73,7 @@ struct spi_flash { u8 poll_cmd; u8 erase_cmd; u8 read_cmd; + u8 write_cmd; void *memory_map; int (*read)(struct spi_flash *flash, u32 offset, size_t len, void *buf); -- cgit v1.1