From f626799816d04502cd69cc45d2add68de8b199bd Mon Sep 17 00:00:00 2001 From: Rong Chang Date: Fri, 12 Apr 2013 10:44:57 +0000 Subject: tpm: Add Infineon slb9635_i2c TPM driver Add a driver for the I2C TPM from Infineon. Signed-off-by: Che-Liang Chiou Signed-off-by: Rong Chang Signed-off-by: Tom Wai-Hong Tam Signed-off-by: Simon Glass --- include/fdtdec.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/fdtdec.h b/include/fdtdec.h index e7e3ff9..39fbdf1 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -90,6 +90,7 @@ enum fdt_compat_id { COMPAT_MAXIM_MAX77686_PMIC, /* MAX77686 PMIC */ COMPAT_GENERIC_SPI_FLASH, /* Generic SPI Flash chip */ COMPAT_MAXIM_98095_CODEC, /* MAX98095 Codec */ + COMPAT_INFINEON_SLB9635_TPM, /* Infineon SLB9635 TPM */ COMPAT_COUNT, }; -- cgit v1.1 From c1af608f6f22d58ec27b1f6ba9841d1baf12cc98 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Fri, 12 Apr 2013 10:44:58 +0000 Subject: exynos: Enable I2C TPM for smdk5250 This is used on some Exynos 5250 variants. Signed-off-by: Simon Glass --- include/configs/exynos5250-dt.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include') diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h index 2b9d6ac..7378487 100644 --- a/include/configs/exynos5250-dt.h +++ b/include/configs/exynos5250-dt.h @@ -129,6 +129,13 @@ #define CONFIG_USB_EHCI_EXYNOS #define CONFIG_USB_STORAGE +/* TPM */ +#define CONFIG_TPM +#define CONFIG_CMD_TPM +#define CONFIG_INFINEON_TPM_I2C +#define CONFIG_INFINEON_TPM_I2C_BUS 3 +#define CONFIG_INFINEON_TPM_I2C_ADDR 0x20 + /* MMC SPL */ #define CONFIG_SPL #define COPY_BL2_FNPTR_ADDR 0x02020030 -- cgit v1.1 From 8732b0700d21588b4954d0f1b182f4c60725d228 Mon Sep 17 00:00:00 2001 From: Che-liang Chiou Date: Thu, 28 Feb 2013 09:34:57 +0000 Subject: tpm: Add TPM command library TPM command library implements a subset of TPM commands defined in TCG Main Specification 1.2 that are useful for implementing secure boot. More TPM commands could be added out of necessity. You may exercise these commands through the 'tpm' command. However, the raw TPM commands are too primitive for writing secure boot in command interpreter scripts; so the 'tpm' command also provides helper functions to make scripting easier. For example, to define a counter in TPM non-volatile storage and initialize it to zero: $ tpm init $ tpm startup TPM_ST_CLEAR $ tpm nv_define d 0x1001 0x1 $ tpm nv_write d 0x1001 0 And then increment the counter by one: $ tpm nv_read d 0x1001 i $ setexpr.l i $i + 1 $ tpm nv_write d 0x1001 $i Signed-off-by: Che-Liang Chiou --- include/tis.h | 73 ++++++++++++++++++++++ include/tpm.h | 197 ++++++++++++++++++++++++++++++++++++++++++++++++---------- 2 files changed, 238 insertions(+), 32 deletions(-) create mode 100644 include/tis.h (limited to 'include') diff --git a/include/tis.h b/include/tis.h new file mode 100644 index 0000000..89e5730 --- /dev/null +++ b/include/tis.h @@ -0,0 +1,73 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __TIS_H +#define __TIS_H + +#include + +/* Low-level interface to access TPM */ + +/* + * tis_init() + * + * Initialize the TPM device. Returns 0 on success or -1 on + * failure (in case device probing did not succeed). + */ +int tis_init(void); + +/* + * tis_open() + * + * Requests access to locality 0 for the caller. After all commands have been + * completed the caller is supposed to call tis_close(). + * + * Returns 0 on success, -1 on failure. + */ +int tis_open(void); + +/* + * tis_close() + * + * terminate the currect session with the TPM by releasing the locked + * locality. Returns 0 on success of -1 on failure (in case lock + * removal did not succeed). + */ +int tis_close(void); + +/* + * tis_sendrecv() + * + * Send the requested data to the TPM and then try to get its response + * + * @sendbuf - buffer of the data to send + * @send_size size of the data to send + * @recvbuf - memory to save the response to + * @recv_len - pointer to the size of the response buffer + * + * Returns 0 on success (and places the number of response bytes at recv_len) + * or -1 on failure. + */ +int tis_sendrecv(const uint8_t *sendbuf, size_t send_size, uint8_t *recvbuf, + size_t *recv_len); + +#endif /* __TIS_H */ diff --git a/include/tpm.h b/include/tpm.h index 6b21e9c..7219b73 100644 --- a/include/tpm.h +++ b/include/tpm.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2011 The Chromium OS Authors. + * Copyright (c) 2013 The Chromium OS Authors. * * See file CREDITS for list of people who contributed to this * project. @@ -20,52 +20,185 @@ * MA 02111-1307 USA */ -#ifndef _INCLUDE_TPM_H_ -#define _INCLUDE_TPM_H_ +#ifndef __TPM_H +#define __TPM_H -#include +#include /* - * tis_init() + * Here is a partial implementation of TPM commands. Please consult TCG Main + * Specification for definitions of TPM commands. + */ + +enum tpm_startup_type { + TPM_ST_CLEAR = 0x0001, + TPM_ST_STATE = 0x0002, + TPM_ST_DEACTIVATED = 0x0003, +}; + +enum tpm_physical_presence { + TPM_PHYSICAL_PRESENCE_HW_DISABLE = 0x0200, + TPM_PHYSICAL_PRESENCE_CMD_DISABLE = 0x0100, + TPM_PHYSICAL_PRESENCE_LIFETIME_LOCK = 0x0080, + TPM_PHYSICAL_PRESENCE_HW_ENABLE = 0x0040, + TPM_PHYSICAL_PRESENCE_CMD_ENABLE = 0x0020, + TPM_PHYSICAL_PRESENCE_NOTPRESENT = 0x0010, + TPM_PHYSICAL_PRESENCE_PRESENT = 0x0008, + TPM_PHYSICAL_PRESENCE_LOCK = 0x0004, +}; + +enum tpm_nv_index { + TPM_NV_INDEX_LOCK = 0xffffffff, + TPM_NV_INDEX_0 = 0x00000000, + TPM_NV_INDEX_DIR = 0x10000001, +}; + +/** + * Initialize TPM device. It must be called before any TPM commands. * - * Initialize the TPM device. Returns 0 on success or -1 on - * failure (in case device probing did not succeed). + * @return 0 on success, non-0 on error. */ -int tis_init(void); +uint32_t tpm_init(void); -/* - * tis_open() +/** + * Issue a TPM_Startup command. * - * Requests access to locality 0 for the caller. After all commands have been - * completed the caller is supposed to call tis_close(). + * @param mode TPM startup mode + * @return return code of the operation + */ +uint32_t tpm_startup(enum tpm_startup_type mode); + +/** + * Issue a TPM_SelfTestFull command. * - * Returns 0 on success, -1 on failure. + * @return return code of the operation */ -int tis_open(void); +uint32_t tpm_self_test_full(void); -/* - * tis_close() +/** + * Issue a TPM_ContinueSelfTest command. * - * terminate the currect session with the TPM by releasing the locked - * locality. Returns 0 on success of -1 on failure (in case lock - * removal did not succeed). + * @return return code of the operation */ -int tis_close(void); +uint32_t tpm_continue_self_test(void); -/* - * tis_sendrecv() +/** + * Issue a TPM_NV_DefineSpace command. The implementation is limited + * to specify TPM_NV_ATTRIBUTES and size of the area. The area index + * could be one of the special value listed in enum tpm_nv_index. * - * Send the requested data to the TPM and then try to get its response + * @param index index of the area + * @param perm TPM_NV_ATTRIBUTES of the area + * @param size size of the area + * @return return code of the operation + */ +uint32_t tpm_nv_define_space(uint32_t index, uint32_t perm, uint32_t size); + +/** + * Issue a TPM_NV_ReadValue command. This implementation is limited + * to read the area from offset 0. The area index could be one of + * the special value listed in enum tpm_nv_index. + * + * @param index index of the area + * @param data output buffer of the area contents + * @param count size of output buffer + * @return return code of the operation + */ +uint32_t tpm_nv_read_value(uint32_t index, void *data, uint32_t count); + +/** + * Issue a TPM_NV_WriteValue command. This implementation is limited + * to write the area from offset 0. The area index could be one of + * the special value listed in enum tpm_nv_index. + * + * @param index index of the area + * @param data input buffer to be wrote to the area + * @param length length of data bytes of input buffer + * @return return code of the operation + */ +uint32_t tpm_nv_write_value(uint32_t index, const void *data, uint32_t length); + +/** + * Issue a TPM_Extend command. + * + * @param index index of the PCR + * @param in_digest 160-bit value representing the event to be + * recorded + * @param out_digest 160-bit PCR value after execution of the + * command + * @return return code of the operation + */ +uint32_t tpm_extend(uint32_t index, const void *in_digest, void *out_digest); + +/** + * Issue a TPM_PCRRead command. * - * @sendbuf - buffer of the data to send - * @send_size size of the data to send - * @recvbuf - memory to save the response to - * @recv_len - pointer to the size of the response buffer + * @param index index of the PCR + * @param data output buffer for contents of the named PCR + * @param count size of output buffer + * @return return code of the operation + */ +uint32_t tpm_pcr_read(uint32_t index, void *data, size_t count); + +/** + * Issue a TSC_PhysicalPresence command. TPM physical presence flag + * is bit-wise OR'ed of flags listed in enum tpm_physical_presence. + * + * @param presence TPM physical presence flag + * @return return code of the operation + */ +uint32_t tpm_tsc_physical_presence(uint16_t presence); + +/** + * Issue a TPM_ReadPubek command. + * + * @param data output buffer for the public endorsement key + * @param count size of ouput buffer + * @return return code of the operation + */ +uint32_t tpm_read_pubek(void *data, size_t count); + +/** + * Issue a TPM_ForceClear command. + * + * @return return code of the operation + */ +uint32_t tpm_force_clear(void); + +/** + * Issue a TPM_PhysicalEnable command. + * + * @return return code of the operation + */ +uint32_t tpm_physical_enable(void); + +/** + * Issue a TPM_PhysicalDisable command. + * + * @return return code of the operation + */ +uint32_t tpm_physical_disable(void); + +/** + * Issue a TPM_PhysicalSetDeactivated command. + * + * @param state boolean state of the deactivated flag + * @return return code of the operation + */ +uint32_t tpm_physical_set_deactivated(uint8_t state); + +/** + * Issue a TPM_GetCapability command. This implementation is limited + * to query sub_cap index that is 4-byte wide. * - * Returns 0 on success (and places the number of response bytes at recv_len) - * or -1 on failure. + * @param cap_area partition of capabilities + * @param sub_cap further definition of capability, which is + * limited to be 4-byte wide + * @param cap output buffer for capability information + * @param count size of ouput buffer + * @return return code of the operation */ -int tis_sendrecv(const uint8_t *sendbuf, size_t send_size, uint8_t *recvbuf, - size_t *recv_len); +uint32_t tpm_get_capability(uint32_t cap_area, uint32_t sub_cap, + void *cap, size_t count); -#endif /* _INCLUDE_TPM_H_ */ +#endif /* __TPM_H */ -- cgit v1.1