From 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10 Mon Sep 17 00:00:00 2001
From: Markus Klotzbuecher <mk@denx.de>
Date: Mon, 22 May 2006 16:33:54 +0200
Subject: This patch adds USB storage support for the delta board. This is the
 first board to make use of a generic OHCI driver, that calls hooks for board
 dependant initialization.

---
 include/asm-arm/arch-pxa/pxa-regs.h | 23 ++++++++++++++++++++++-
 include/configs/delta.h             | 11 ++++++++++-
 include/da9030.h                    | 12 ++++++++++++
 3 files changed, 44 insertions(+), 2 deletions(-)

(limited to 'include')

diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index ebda719..c47306c 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -592,9 +592,11 @@ typedef void		(*ExcpHndlr) (void) ;
 #define PMC_REG_BASE	__REG(0x40500400)  /* Primary Modem Codec */
 #define SMC_REG_BASE	__REG(0x40500500)  /* Secondary Modem Codec */
 
+
 /*
  * USB Device Controller
  */
+#ifndef CONFIG_CPU_MONAHANS
 #define UDC_RES1	__REG(0x40600004)  /* UDC Undocumented - Reserved1 */
 #define UDC_RES2	__REG(0x40600008)  /* UDC Undocumented - Reserved2 */
 #define UDC_RES3	__REG(0x4060000C)  /* UDC Undocumented - Reserved3 */
@@ -749,11 +751,30 @@ typedef void		(*ExcpHndlr) (void) ;
 #define USIR1_IR13	(1 << 5)	/* Interrup request ep 13 */
 #define USIR1_IR14	(1 << 6)	/* Interrup request ep 14 */
 #define USIR1_IR15	(1 << 7)	/* Interrup request ep 15 */
+#endif /* ! CONFIG_CPU_MONAHANS */
+
+#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+
+/*
+ * USB Client Controller (incomplete)
+ */
+#define UDCCR		__REG(0x40600000)
+#define UDCICR0		__REG(0x40600004)
+#define UDCCIR0		__REG(0x40600008)
+#define UDCISR0		__REG(0x4060000c)
+#define UDCSIR1		__REG(0x40600010)
+#define UDCFNR		__REG(0x40600014)
+#define UDCOTGICR	__REG(0x40600018)
+#define UDCOTGISR	__REG(0x4060001c)
+#define UP2OCR		__REG(0x40600020)
+#define UP3OCR		__REG(0x40600024)
+
+
 
-#if defined(CONFIG_PXA27X)
 /*
  * USB Host Controller
  */
+#define OHCI_REGS_BASE	0x4C000000	/* required for ohci driver */
 #define UHCREV		__REG(0x4C000000)
 #define UHCHCON		__REG(0x4C000004)
 #define UHCCOMS		__REG(0x4C000008)
diff --git a/include/configs/delta.h b/include/configs/delta.h
index 91284fd..0423bcb 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -94,13 +94,22 @@
 # define CONFIG_COMMANDS	((CONFIG_CMD_DFL \
 				  | CFG_CMD_ENV \
 				  | CFG_CMD_NAND \
-				  | CFG_CMD_I2C) \
+				  | CFG_CMD_I2C \
+				  | CFG_CMD_USB \
+				  | CFG_CMD_FAT) \
 				 & ~(CFG_CMD_NET \
 				     | CFG_CMD_FLASH \
 				     | CFG_CMD_IMLS))
 #endif
 
 
+#define CONFIG_USB_OHCI         1
+#define CONFIG_USB_STORAGE      1
+#define CONFIG_DOS_PARTITION    1
+
+#define LITTLEENDIAN            1       /* used by usb_ohci.c  */
+
+
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 
diff --git a/include/da9030.h b/include/da9030.h
index 41108b9..3e3b202 100644
--- a/include/da9030.h
+++ b/include/da9030.h
@@ -104,3 +104,15 @@
 #define SYS_CONTROL_A_HWRES_ENABLE		(1<<2)
 #define SYS_CONTROL_A_WDOG_ACTION		(1<<3)
 #define SYS_CONTROL_A_WATCHDOG			(1<<7)
+
+#define MISC_CONTROLB_USB_INT_RISING		(1<<2)
+#define MISC_CONTROLB_SESSION_VALID_EN		(1<<3)
+
+#define USB_PUMP_USBVE				(1<<0)
+#define USB_PUMP_USBVEP				(1<<1)
+#define USB_PUMP_SRP_DETECT			(1<<2)
+#define USB_PUMP_SESSION_VALID			(1<<3)
+#define USB_PUMP_VBUS_VALID_4_0			(1<<4)
+#define USB_PUMP_VBUS_VALID_4_4			(1<<5)
+#define USB_PUMP_EN_USBVE			(1<<6)
+#define USB_PUMP_EN_USBVEP			(1<<7)
-- 
cgit v1.1


From 24e37645e7378b20fa8f20e2996c8fb8e90c70c9 Mon Sep 17 00:00:00 2001
From: Markus Klotzbuecher <mk@denx.de>
Date: Tue, 23 May 2006 10:33:11 +0200
Subject: More cleanup for the delta board and the generic usb_ohci driver.
 Added CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu
 specific initialization and cleanup hooks respectively.

---
 include/configs/delta.h | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'include')

diff --git a/include/configs/delta.h b/include/configs/delta.h
index 0423bcb..e6b05e0 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -102,13 +102,17 @@
 				     | CFG_CMD_IMLS))
 #endif
 
-
+/* USB */
 #define CONFIG_USB_OHCI         1
 #define CONFIG_USB_STORAGE      1
 #define CONFIG_DOS_PARTITION    1
 
-#define LITTLEENDIAN            1       /* used by usb_ohci.c  */
+#undef CFG_USB_BOARD_INIT
+#define CFG_USB_CPU_INIT	1
+#define CFG_USB_OHCI_REGS_BASE	OHCI_REGS_BASE
+#define CFG_USB_SLOT_NAME	"delta"
 
+#define LITTLEENDIAN            1       /* used by usb_ohci.c  */
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
-- 
cgit v1.1


From 301f1aa384d0edcae6a22fd9adb933ad71695ecc Mon Sep 17 00:00:00 2001
From: Markus Klotzbuecher <mk@denx.de>
Date: Tue, 23 May 2006 13:38:35 +0200
Subject: Changed the mp2usb (at91rm9200) board to use the generic OHCI driver.
 Some fixes to the latter.

---
 include/configs/delta.h  |  6 +++---
 include/configs/mp2usb.h | 11 ++++++++---
 2 files changed, 11 insertions(+), 6 deletions(-)

(limited to 'include')

diff --git a/include/configs/delta.h b/include/configs/delta.h
index e6b05e0..fea821a 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -107,10 +107,10 @@
 #define CONFIG_USB_STORAGE      1
 #define CONFIG_DOS_PARTITION    1
 
-#undef CFG_USB_BOARD_INIT
-#define CFG_USB_CPU_INIT	1
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT	1
 #define CFG_USB_OHCI_REGS_BASE	OHCI_REGS_BASE
-#define CFG_USB_SLOT_NAME	"delta"
+#define CFG_USB_OHCI_SLOT_NAME	"delta"
 
 #define LITTLEENDIAN            1       /* used by usb_ohci.c  */
 
diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h
index 04f1f24..edb20f8 100644
--- a/include/configs/mp2usb.h
+++ b/include/configs/mp2usb.h
@@ -107,6 +107,11 @@
 #define CONFIG_DOS_PARTITION	1
 #define CONFIG_AT91C_PQFP_UHPBUG 1
 
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT		1
+#define CFG_USB_OHCI_REGS_BASE		AT91_USB_HOST_BASE
+#define CFG_USB_OHCI_SLOT_NAME		"at91rm9200"
+
 #undef CONFIG_HARD_I2C
 
 #ifdef CONFIG_HARD_I2C
@@ -127,7 +132,7 @@
 #define CONFIG_COMMANDS		\
 		       ((CONFIG_CMD_DFL	| \
 			CFG_CMD_DATE	| \
-			CFG_CMD_DHCP 	| \
+			CFG_CMD_DHCP	| \
 			CFG_CMD_EEPROM	| \
 			CFG_CMD_I2C	| \
 			CFG_CMD_NFS	| \
@@ -136,7 +141,7 @@
 #else
 #define CONFIG_COMMANDS		\
 		       ((CONFIG_CMD_DFL	| \
-			CFG_CMD_DHCP 	| \
+			CFG_CMD_DHCP	| \
 			CFG_CMD_NFS	| \
 			CFG_CMD_SNTP	| \
 			CFG_CMD_USB      | \
@@ -156,7 +161,7 @@
 
 #define CONFIG_NR_DRAM_BANKS	1
 #define PHYS_SDRAM		0x20000000
-#define PHYS_SDRAM_SIZE		0x08000000 	/* 128 megs */
+#define PHYS_SDRAM_SIZE		0x08000000	/* 128 megs */
 
 #define CFG_MEMTEST_START	PHYS_SDRAM
 #define CFG_MEMTEST_END		CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
-- 
cgit v1.1


From ddf83a2fcef1a670c45fc585119dcc1fe062c4a9 Mon Sep 17 00:00:00 2001
From: Markus Klotzbuecher <mk@denx.de>
Date: Tue, 30 May 2006 16:56:14 +0200
Subject: Support generic OHCI support for the s3c24x0 cpu.

---
 include/configs/trab.h | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'include')

diff --git a/include/configs/trab.h b/include/configs/trab.h
index 85ee756..b6d4bcf 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -84,6 +84,11 @@
 #define CONFIG_USB_STORAGE	1
 #define CONFIG_DOS_PARTITION	1
 
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT	1
+#define CFG_USB_OHCI_REGS_BASE	S3C24X0_USB_HOST_BASE
+#define CFG_USB_OHCI_SLOT_NAME	"s3c2400"
+
 /*
  * Size of malloc() pool
  */
-- 
cgit v1.1


From 16c8d5e76ae0f78f39a60608574adfe0feb9cc70 Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@pollux.denx.de>
Date: Wed, 14 Jun 2006 17:45:53 +0200
Subject: Various USB related patches - Add support for mpc8xx USB device. -
 Add support for Common Device Class - Abstract Control Model USB console. -
 Add support for flow control in USB slave devices. - Add support for
 switching between gserial and cdc_acm using environment. - Minor changes to
 usbdcore_omap1510.c usbdcore_omap1510.h - Update usbcore slightly to ease
 host enumeration. - Fix non-portable endian problems in usbdcore and
 usbdcore_ep0. - Add AdderUSB_config as a defconfig to enable usage of the USB
 console   by default with the Adder87x U-Boot port. Patches by Bryan
 O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006

---
 include/configs/AdderUSB.h  |  51 +++++++++++
 include/usb_cdc_acm.h       |  43 +++++++++
 include/usbdcore.h          |   3 +
 include/usbdcore_mpc8xx.h   | 210 ++++++++++++++++++++++++++++++++++++++++++++
 include/usbdcore_omap1510.h |  18 +++-
 include/usbdescriptors.h    |  38 +++++---
 6 files changed, 345 insertions(+), 18 deletions(-)
 create mode 100644 include/configs/AdderUSB.h
 create mode 100644 include/usb_cdc_acm.h
 create mode 100644 include/usbdcore_mpc8xx.h

(limited to 'include')

diff --git a/include/configs/AdderUSB.h b/include/configs/AdderUSB.h
new file mode 100644
index 0000000..2112e56
--- /dev/null
+++ b/include/configs/AdderUSB.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2006 CodeHermit.
+ * Bryan O'Donoghue <bodonoghue@codehermit.ie>
+ *
+ * Provides support for USB console on the Analogue & Micro Adder87x
+ * 
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ADDERUSB__
+#define __ADDERUSB__
+
+/* Include the board port */
+#include "Adder.h"
+
+#define CONFIG_USB_DEVICE		/* Include UDC driver */
+#define CONFIG_USB_TTY			/* Bind the TTY driver to UDC */
+#define CFG_USB_EXTC_CLK 0x02		/* Oscillator on EXTC_CLK 2 */
+#define CFG_USB_BRG_CLK	0x04		/* or use Baud rate generator 0x04 */
+#define CFG_CONSOLE_IS_IN_ENV		/* Console is in env */
+
+/* If you have a USB-IF assigned VendorID then you may wish to define
+ * your own vendor specific values either in BoardName.h or directly in
+ * usbd_vendor_info.h 
+ */
+
+/* 
+#define CONFIG_USBD_MANUFACTURER	"CodeHermit.ie"
+#define CONFIG_USBD_PRODUCT_NAME	"Das U-Boot"
+#define CONFIG_USBD_VENDORID		0xFFFF 
+#define CONFIG_USBD_PRODUCTID_GSERIAL	0xFFFF
+#define CONFIG_USBD_PRODUCTID_CDCACM	0xFFFE
+*/
+
+#endif /* __ADDERUSB_H__ */
diff --git a/include/usb_cdc_acm.h b/include/usb_cdc_acm.h
new file mode 100644
index 0000000..8cb1654
--- /dev/null
+++ b/include/usb_cdc_acm.h
@@ -0,0 +1,43 @@
+/*
+ * (C) Copyright 2006
+ * Bryan O'Donoghue, deckard@codehermit.ie, CodeHermit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/* ACM Control Requests */
+#define ACM_SEND_ENCAPSULATED_COMMAND	0x00
+#define ACM_GET_ENCAPSULATED_RESPONSE	0x01
+#define ACM_SET_COMM_FEATURE		0x02
+#define ACM_GET_COMM_FEATRUE		0x03
+#define ACM_CLEAR_COMM_FEATURE		0x04
+#define ACM_SET_LINE_ENCODING		0x20
+#define ACM_GET_LINE_ENCODING		0x21
+#define ACM_SET_CONTROL_LINE_STATE	0x22
+#define ACM_SEND_BREAK			0x23
+
+/* ACM Notification Codes */
+#define ACM_NETWORK_CONNECTION		0x00
+#define ACM_RESPONSE_AVAILABLE		0x01
+#define ACM_SERIAL_STATE		0x20
+
+/* Format of response expected by a ACM_GET_LINE_ENCODING request */ 
+struct rs232_emu{
+		unsigned long dter;
+		unsigned char stop_bits;
+		unsigned char parity;
+		unsigned char data_bits;
+}__attribute__((packed));
diff --git a/include/usbdcore.h b/include/usbdcore.h
index 6e92df1..cb2be72 100644
--- a/include/usbdcore.h
+++ b/include/usbdcore.h
@@ -576,6 +576,9 @@ struct usb_device_instance {
 
 	void (*event) (struct usb_device_instance *device, usb_device_event_t event, int data);
 
+	/* Do cdc device specific control requests */
+	int (*cdc_recv_setup)(struct usb_device_request *request, struct urb *urb);
+
 	/* bus interface */
 	struct usb_bus_instance *bus;	/* which bus interface driver */
 
diff --git a/include/usbdcore_mpc8xx.h b/include/usbdcore_mpc8xx.h
new file mode 100644
index 0000000..e54acd9
--- /dev/null
+++ b/include/usbdcore_mpc8xx.h
@@ -0,0 +1,210 @@
+/*
+ * Copyright (C) 2006 Bryan O'Donoghue, CodeHermit
+ * bodonoghue@codehermit.ie
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ */
+
+#include <commproc.h>
+
+/* Mode Register */
+#define USMOD_EN	0x01
+#define USMOD_HOST	0x02
+#define USMOD_TEST	0x04
+#define USMOD_SFTE	0x08
+#define USMOD_RESUME	0x40
+#define USMOD_LSS	0x80
+
+/* Endpoint Registers */
+#define USEP_RHS_NORM	0x00
+#define USEP_RHS_IGNORE	0x01
+#define USEP_RHS_NAK	0x02
+#define USEP_RHS_STALL	0x03
+
+#define USEP_THS_NORM	0x00
+#define USEP_THS_IGNORE	0x04
+#define USEP_THS_NAK	0x08
+#define USEP_THS_STALL	0x0C
+
+#define USEP_RTE	0x10
+#define USEP_MF		0x20
+
+#define USEP_TM_CONTROL	0x00
+#define USEP_TM_INT	0x100
+#define USEP_TM_BULK	0x200
+#define USEP_TM_ISO	0x300
+
+/* Command Register */
+#define USCOM_EP0	0x00
+#define USCOM_EP1	0x01
+#define USCOM_EP2	0x02
+#define USCOM_EP3	0x03
+
+#define USCOM_FLUSH	0x40
+#define USCOM_STR	0x80
+
+/* Event Register */
+#define USB_E_RXB	0x0001
+#define USB_E_TXB	0x0002
+#define USB_E_BSY	0x0004
+#define USB_E_SOF	0x0008
+#define USB_E_TXE1	0x0010
+#define USB_E_TXE2	0x0020
+#define USB_E_TXE3	0x0040
+#define USB_E_TXE4	0x0080
+#define USB_TX_ERRMASK (USB_E_TXE1|USB_E_TXE2|USB_E_TXE3|USB_E_TXE4)
+#define USB_E_IDLE	0x0100
+#define USB_E_RESET	0x0200
+
+/* Mask Register */
+#define USBS_IDLE	0x01
+
+/* RX Buffer Descriptor */
+#define RX_BD_OV	0x02
+#define RX_BD_CR	0x04
+#define RX_BD_AB	0x08
+#define RX_BD_NO	0x10
+#define RX_BD_PID_DATA0	0x00
+#define RX_BD_PID_DATA1	0x40
+#define RX_BD_PID_SETUP	0x80
+#define RX_BD_F		0x400
+#define RX_BD_L		0x800
+#define RX_BD_I		0x1000
+#define RX_BD_W		0x2000
+#define RX_BD_E		0x8000
+
+/* Useful masks */
+#define RX_BD_PID_BITMASK (RX_BD_PID_DATA1 | RX_BD_PID_SETUP)
+#define STALL_BITMASK (USEP_THS_STALL | USEP_RHS_STALL)
+#define NAK_BITMASK (USEP_THS_NAK | USEP_RHS_NAK)
+#define CBD_TX_BITMASK (TX_BD_R | TX_BD_L | TX_BD_TC | TX_BD_I | TX_BD_CNF)
+
+/* TX Buffer Descriptor */
+#define TX_BD_UN	0x02
+#define TX_BD_TO	0x04
+#define TX_BD_NO_PID	0x00
+#define TX_BD_PID_DATA0	0x80
+#define TX_BD_PID_DATA1	0xC0	
+#define TX_BD_CNF	0x200
+#define TX_BD_TC	0x400
+#define TX_BD_L		0x800
+#define TX_BD_I		0x1000
+#define TX_BD_W		0x2000
+#define TX_BD_R		0x8000
+
+/* Implementation specific defines */
+
+#define EP_MIN_PACKET_SIZE 0x08
+#define MAX_ENDPOINTS	0x04
+#define FIFO_SIZE	0x10
+#define EP_MAX_PKT	FIFO_SIZE
+#define TX_RING_SIZE	0x04
+#define RX_RING_SIZE	0x06
+#define USB_MAX_PKT	0x40
+#define TOGGLE_TX_PID(x) x= ((~x)&0x40)|0x80
+#define TOGGLE_RX_PID(x) x^= 0x40
+#define EP_ATTACHED	0x01	/* Endpoint has a urb attached or not */
+#define EP_SEND_ZLP	0x02	/* Send ZLP y/n ? */
+
+#define PROFF_USB	0x00000000
+#define CPM_USB_BASE	0x00000A00
+
+/* UDC device defines */
+#define EP0_MAX_PACKET_SIZE	EP_MAX_PKT
+#define UDC_OUT_ENDPOINT	0x02
+#define UDC_OUT_PACKET_SIZE	EP_MIN_PACKET_SIZE
+#define UDC_IN_ENDPOINT		0x03
+#define UDC_IN_PACKET_SIZE	EP_MIN_PACKET_SIZE
+#define UDC_INT_ENDPOINT	0x01
+#define UDC_INT_PACKET_SIZE	UDC_IN_PACKET_SIZE
+#define UDC_BULK_PACKET_SIZE	EP_MIN_PACKET_SIZE
+
+struct mpc8xx_ep {
+	struct urb * urb;
+	unsigned char pid;
+	unsigned char sc;
+	volatile cbd_t * prx;
+};
+
+typedef struct mpc8xx_usb{
+	char usmod;	/* Mode Register */
+	char usaddr;	/* Slave Address Register */
+	char uscom;	/* Command Register */
+	char res1;	/* Reserved */
+	ushort usep[4];
+	ulong res2;	/* Reserved */
+	ushort usber;	/* Event Register */
+	ushort res3;	/* Reserved */
+	ushort usbmr;	/* Mask Register */
+	char res4;	/* Reserved */ 
+	char usbs;	/* Status Register */
+	char res5[8];	/* Reserved */
+}usb_t;
+
+typedef struct mpc8xx_parameter_ram{
+	ushort ep0ptr;	/* Endpoint Pointer Register 0 */	
+	ushort ep1ptr;	/* Endpoint Pointer Register 1 */	
+	ushort ep2ptr;	/* Endpoint Pointer Register 2 */	
+	ushort ep3ptr;	/* Endpoint Pointer Register 3 */	
+	uint rstate;	/* Receive state */
+	uint rptr;	/* Receive internal data pointer */
+	ushort frame_n;	/* Frame number */
+	ushort rbcnt;	/* Receive byte count */
+	uint rtemp;	/* Receive temp cp use only */
+	uint rxusb;	/* Rx Data Temp */
+	ushort rxuptr;	/* Rx microcode return address temp */
+}usb_pram_t;
+
+typedef struct endpoint_parameter_block_pointer{
+	ushort rbase;	/* RxBD base address */
+	ushort tbase;	/* TxBD base address */
+	char rfcr;	/* Rx Function code */
+	char tfcr;	/* Tx Function code */
+	ushort mrblr;	/* Maximum Receive Buffer Length */
+	ushort rbptr; 	/* RxBD pointer Next Buffer Descriptor */
+	ushort tbptr;	/* TxBD pointer Next Buffer Descriptor  */
+	ulong tstate;	/* Transmit internal state */
+	ulong tptr;	/* Transmit internal data pointer */
+	ushort tcrc;	/* Transmit temp CRC */
+	ushort tbcnt;	/* Transmit internal bye count */
+	ulong ttemp;	/* Tx temp */
+	ushort txuptr;	/* Tx microcode return address */
+	ushort res1;	/* Reserved */
+}usb_epb_t;
+
+typedef enum mpc8xx_udc_state{
+	STATE_NOT_READY,
+	STATE_ERROR,
+	STATE_READY,
+}mpc8xx_udc_state_t;
+
+/* Declarations */
+int udc_init(void);
+void udc_irq(void);
+int udc_endpoint_write(struct usb_endpoint_instance *endpoint);
+void udc_setup_ep(struct usb_device_instance *device, unsigned int ep,
+                  struct usb_endpoint_instance *endpoint);
+void udc_connect(void);
+void udc_disconnect(void);
+void udc_enable(struct usb_device_instance *device);
+void udc_disable(void);
+void udc_startup_events(struct usb_device_instance *device);
+
+/* Flow control */
+void udc_set_nak(int epid);
+void udc_unset_nak (int epid);
diff --git a/include/usbdcore_omap1510.h b/include/usbdcore_omap1510.h
index 6ea3331..526fcd9 100644
--- a/include/usbdcore_omap1510.h
+++ b/include/usbdcore_omap1510.h
@@ -161,10 +161,20 @@
 #define UDC_VBUS_CTRL	    (1 << 19)
 #define UDC_VBUS_MODE	    (1 << 18)
 
-
-void omap1510_udc_irq(void);
-void omap1510_udc_noniso_irq(void);
-
+/* OMAP Endpoint parameters */
+#define EP0_MAX_PACKET_SIZE 64
+#define UDC_OUT_ENDPOINT 2
+#define UDC_OUT_PACKET_SIZE 64
+#define UDC_IN_ENDPOINT	1
+#define UDC_IN_PACKET_SIZE 64
+#define UDC_INT_ENDPOINT 5
+#define UDC_INT_PKTSIZE	16
+#define UDC_BULK_PKTSIZE 16
+
+void udc_irq (void);
+/* Flow control */
+void udc_set_nak(int epid);
+void udc_unset_nak (int epid);
 
 /* Higher level functions for abstracting away from specific device */
 void udc_endpoint_write(struct usb_endpoint_instance *endpoint);
diff --git a/include/usbdescriptors.h b/include/usbdescriptors.h
index 2d9f739..8336c18 100644
--- a/include/usbdescriptors.h
+++ b/include/usbdescriptors.h
@@ -92,33 +92,42 @@
 #define COMMUNICATIONS_DEVICE_CLASS	0x02
 
 /* c.f. CDC 4.2 Table 15 */
-#define COMMUNICATIONS_INTERFACE_CLASS	0x02
+#define COMMUNICATIONS_INTERFACE_CLASS_CONTROL	0x02
+#define COMMUNICATIONS_INTERFACE_CLASS_DATA		0x0A
+#define COMMUNICATIONS_INTERFACE_CLASS_VENDOR	0x0FF
 
 /* c.f. CDC 4.3 Table 16 */
-#define COMMUNICATIONS_NO_SUBCLASS	0x00
+#define COMMUNICATIONS_NO_SUBCLASS		0x00
 #define COMMUNICATIONS_DLCM_SUBCLASS	0x01
-#define COMMUNICATIONS_ACM_SUBCLASS	0x02
-#define COMMUNICATIONS_TCM_SUBCLASS	0x03
+#define COMMUNICATIONS_ACM_SUBCLASS		0x02
+#define COMMUNICATIONS_TCM_SUBCLASS		0x03
 #define COMMUNICATIONS_MCCM_SUBCLASS	0x04
-#define COMMUNICATIONS_CCM_SUBCLASS	0x05
+#define COMMUNICATIONS_CCM_SUBCLASS		0x05
 #define COMMUNICATIONS_ENCM_SUBCLASS	0x06
 #define COMMUNICATIONS_ANCM_SUBCLASS	0x07
 
 /* c.f. WMCD 5.1 */
 #define COMMUNICATIONS_WHCM_SUBCLASS	0x08
-#define COMMUNICATIONS_DMM_SUBCLASS	0x09
+#define COMMUNICATIONS_DMM_SUBCLASS		0x09
 #define COMMUNICATIONS_MDLM_SUBCLASS	0x0a
 #define COMMUNICATIONS_OBEX_SUBCLASS	0x0b
 
-/* c.f. CDC 4.6 Table 18 */
+/* c.f. CDC 4.4 Table 17 */
+#define COMMUNICATIONS_NO_PROTOCOL		0x00
+#define COMMUNICATIONS_V25TER_PROTOCOL	0x01	/*Common AT Hayes compatible*/
+
+/* c.f. CDC 4.5 Table 18 */
 #define DATA_INTERFACE_CLASS		0x0a
 
+/* c.f. CDC 4.6 No Table */
+#define DATA_INTERFACE_SUBCLASS_NONE	0x00	/* No subclass pertinent */
+
 /* c.f. CDC 4.7 Table 19 */
-#define COMMUNICATIONS_NO_PROTOCOL	0x00
+#define DATA_INTERFACE_PROTOCOL_NONE	0x00	/* No class protcol required */
 
 
 /* c.f. CDC 5.2.3 Table 24 */
-#define CS_INTERFACE			0x24
+#define CS_INTERFACE		0x24
 #define CS_ENDPOINT			0x25
 
 /*
@@ -128,7 +137,7 @@
  * c.f. WMCD 5.3 Table 5.3
  */
 
-#define USB_ST_HEADER			0x00
+#define USB_ST_HEADER		0x00
 #define USB_ST_CMF			0x01
 #define USB_ST_ACMF			0x02
 #define USB_ST_DLMF			0x03
@@ -137,18 +146,18 @@
 #define USB_ST_UF			0x06
 #define USB_ST_CSF			0x07
 #define USB_ST_TOMF			0x08
-#define USB_ST_USBTF			0x09
+#define USB_ST_USBTF		0x09
 #define USB_ST_NCT			0x0a
 #define USB_ST_PUF			0x0b
 #define USB_ST_EUF			0x0c
 #define USB_ST_MCMF			0x0d
 #define USB_ST_CCMF			0x0e
 #define USB_ST_ENF			0x0f
-#define USB_ST_ATMNF			0x10
+#define USB_ST_ATMNF		0x10
 
 #define USB_ST_WHCM			0x11
 #define USB_ST_MDLM			0x12
-#define USB_ST_MDLMD			0x13
+#define USB_ST_MDLMD		0x13
 #define USB_ST_DMM			0x14
 #define USB_ST_OBEX			0x15
 #define USB_ST_CS			0x16
@@ -312,7 +321,8 @@ struct usb_class_union_function_descriptor {
 	u8 bDescriptorType;
 	u8 bDescriptorSubtype;	/* 0x06 */
 	u8 bMasterInterface;
-	u8 bSlaveInterface0[0];
+	//u8 bSlaveInterface0[0];
+	u8 bSlaveInterface0;
 } __attribute__ ((packed));
 
 struct usb_class_country_selection_descriptor {
-- 
cgit v1.1


From 386eda022473394ad8f36b86f2bdc9b4cb816291 Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@pollux.denx.de>
Date: Wed, 14 Jun 2006 18:14:56 +0200
Subject: Code cleanup

---
 include/asm-arm/arch-pxa/pxa-regs.h |  2 --
 include/configs/AdderUSB.h          |  8 ++++----
 include/usb_cdc_acm.h               |  2 +-
 include/usbdcore_mpc8xx.h           | 14 +++++++-------
 include/usbdescriptors.h            |  2 +-
 5 files changed, 13 insertions(+), 15 deletions(-)

(limited to 'include')

diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index c47306c..e8cb299 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -769,8 +769,6 @@ typedef void		(*ExcpHndlr) (void) ;
 #define UP2OCR		__REG(0x40600020)
 #define UP3OCR		__REG(0x40600024)
 
-
-
 /*
  * USB Host Controller
  */
diff --git a/include/configs/AdderUSB.h b/include/configs/AdderUSB.h
index 2112e56..a4f7f9a 100644
--- a/include/configs/AdderUSB.h
+++ b/include/configs/AdderUSB.h
@@ -3,7 +3,7 @@
  * Bryan O'Donoghue <bodonoghue@codehermit.ie>
  *
  * Provides support for USB console on the Analogue & Micro Adder87x
- * 
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -37,13 +37,13 @@
 
 /* If you have a USB-IF assigned VendorID then you may wish to define
  * your own vendor specific values either in BoardName.h or directly in
- * usbd_vendor_info.h 
+ * usbd_vendor_info.h
  */
 
-/* 
+/*
 #define CONFIG_USBD_MANUFACTURER	"CodeHermit.ie"
 #define CONFIG_USBD_PRODUCT_NAME	"Das U-Boot"
-#define CONFIG_USBD_VENDORID		0xFFFF 
+#define CONFIG_USBD_VENDORID		0xFFFF
 #define CONFIG_USBD_PRODUCTID_GSERIAL	0xFFFF
 #define CONFIG_USBD_PRODUCTID_CDCACM	0xFFFE
 */
diff --git a/include/usb_cdc_acm.h b/include/usb_cdc_acm.h
index 8cb1654..87bf50c 100644
--- a/include/usb_cdc_acm.h
+++ b/include/usb_cdc_acm.h
@@ -34,7 +34,7 @@
 #define ACM_RESPONSE_AVAILABLE		0x01
 #define ACM_SERIAL_STATE		0x20
 
-/* Format of response expected by a ACM_GET_LINE_ENCODING request */ 
+/* Format of response expected by a ACM_GET_LINE_ENCODING request */
 struct rs232_emu{
 		unsigned long dter;
 		unsigned char stop_bits;
diff --git a/include/usbdcore_mpc8xx.h b/include/usbdcore_mpc8xx.h
index e54acd9..9df62f4 100644
--- a/include/usbdcore_mpc8xx.h
+++ b/include/usbdcore_mpc8xx.h
@@ -99,7 +99,7 @@
 #define TX_BD_TO	0x04
 #define TX_BD_NO_PID	0x00
 #define TX_BD_PID_DATA0	0x80
-#define TX_BD_PID_DATA1	0xC0	
+#define TX_BD_PID_DATA1	0xC0
 #define TX_BD_CNF	0x200
 #define TX_BD_TC	0x400
 #define TX_BD_L		0x800
@@ -151,16 +151,16 @@ typedef struct mpc8xx_usb{
 	ushort usber;	/* Event Register */
 	ushort res3;	/* Reserved */
 	ushort usbmr;	/* Mask Register */
-	char res4;	/* Reserved */ 
+	char res4;	/* Reserved */
 	char usbs;	/* Status Register */
 	char res5[8];	/* Reserved */
 }usb_t;
 
 typedef struct mpc8xx_parameter_ram{
-	ushort ep0ptr;	/* Endpoint Pointer Register 0 */	
-	ushort ep1ptr;	/* Endpoint Pointer Register 1 */	
-	ushort ep2ptr;	/* Endpoint Pointer Register 2 */	
-	ushort ep3ptr;	/* Endpoint Pointer Register 3 */	
+	ushort ep0ptr;	/* Endpoint Pointer Register 0 */
+	ushort ep1ptr;	/* Endpoint Pointer Register 1 */
+	ushort ep2ptr;	/* Endpoint Pointer Register 2 */
+	ushort ep3ptr;	/* Endpoint Pointer Register 3 */
 	uint rstate;	/* Receive state */
 	uint rptr;	/* Receive internal data pointer */
 	ushort frame_n;	/* Frame number */
@@ -198,7 +198,7 @@ int udc_init(void);
 void udc_irq(void);
 int udc_endpoint_write(struct usb_endpoint_instance *endpoint);
 void udc_setup_ep(struct usb_device_instance *device, unsigned int ep,
-                  struct usb_endpoint_instance *endpoint);
+		  struct usb_endpoint_instance *endpoint);
 void udc_connect(void);
 void udc_disconnect(void);
 void udc_enable(struct usb_device_instance *device);
diff --git a/include/usbdescriptors.h b/include/usbdescriptors.h
index 8336c18..a752097 100644
--- a/include/usbdescriptors.h
+++ b/include/usbdescriptors.h
@@ -321,7 +321,7 @@ struct usb_class_union_function_descriptor {
 	u8 bDescriptorType;
 	u8 bDescriptorSubtype;	/* 0x06 */
 	u8 bMasterInterface;
-	//u8 bSlaveInterface0[0];
+	/* u8 bSlaveInterface0[0]; */
 	u8 bSlaveInterface0;
 } __attribute__ ((packed));
 
-- 
cgit v1.1


From 53e336e9ffc51035bdc4e5867631b3378761b4df Mon Sep 17 00:00:00 2001
From: Markus Klotzbuecher <mk@denx.de>
Date: Mon, 27 Nov 2006 11:43:09 +0100
Subject: Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI
 driver and adapted board configs TQM5200 and yosemite accordingly. This
 commit also makes the maximum number of root hub ports configurable
 (CFG_USB_OHCI_MAX_ROOT_PORTS).

---
 include/configs/TQM5200.h  | 7 +++++++
 include/configs/delta.h    | 1 +
 include/configs/mp2usb.h   | 1 +
 include/configs/trab.h     | 1 +
 include/configs/yosemite.h | 6 ++++++
 5 files changed, 16 insertions(+)

(limited to 'include')

diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index be83b67..832dcdd 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -128,6 +128,13 @@
 #define CONFIG_USB_OHCI
 #define ADD_USB_CMD		CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
+
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT
+#define CFG_USB_OHCI_REGS_BASE	MPC5XXX_USB
+#define CFG_USB_OHCI_SLOT_NAME	"mpc5200"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS	15
+
 #else
 #define ADD_USB_CMD		0
 #endif
diff --git a/include/configs/delta.h b/include/configs/delta.h
index fea821a..0617ad8 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -111,6 +111,7 @@
 #define CFG_USB_OHCI_CPU_INIT	1
 #define CFG_USB_OHCI_REGS_BASE	OHCI_REGS_BASE
 #define CFG_USB_OHCI_SLOT_NAME	"delta"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS	3
 
 #define LITTLEENDIAN            1       /* used by usb_ohci.c  */
 
diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h
index edb20f8..d182d49 100644
--- a/include/configs/mp2usb.h
+++ b/include/configs/mp2usb.h
@@ -111,6 +111,7 @@
 #define CFG_USB_OHCI_CPU_INIT		1
 #define CFG_USB_OHCI_REGS_BASE		AT91_USB_HOST_BASE
 #define CFG_USB_OHCI_SLOT_NAME		"at91rm9200"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS	15
 
 #undef CONFIG_HARD_I2C
 
diff --git a/include/configs/trab.h b/include/configs/trab.h
index ae97947..33617cd 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -88,6 +88,7 @@
 #define CFG_USB_OHCI_CPU_INIT	1
 #define CFG_USB_OHCI_REGS_BASE	S3C24X0_USB_HOST_BASE
 #define CFG_USB_OHCI_SLOT_NAME	"s3c2400"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS	15
 
 /*
  * Size of malloc() pool
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index a81cf34..e6a02c6 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -216,6 +216,12 @@
 #define CONFIG_USB_OHCI
 #define CONFIG_USB_STORAGE
 
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT	1
+#define CFG_USB_OHCI_REGS_BASE	(CFG_PERIPHERAL_BASE | 0x1000)
+#define CFG_USB_OHCI_SLOT_NAME	"ppc440"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS	15
+
 /*Comment this out to enable USB 1.1 device*/
 #define USB_2_0_DEVICE
 #endif /*CONFIG_440EP*/
-- 
cgit v1.1


From 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418 Mon Sep 17 00:00:00 2001
From: Markus Klotzbuecher <mk@denx.de>
Date: Mon, 27 Nov 2006 11:44:58 +0100
Subject: Introduced the configuration option CONFIG_USB_OHCI_NEW in order to
 be able to choose between the old and the generic OHCI drivers.

---
 include/configs/TQM5200.h  | 2 +-
 include/configs/delta.h    | 2 +-
 include/configs/mp2usb.h   | 2 +-
 include/configs/trab.h     | 2 +-
 include/configs/yosemite.h | 2 +-
 include/usb.h              | 2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'include')

diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 832dcdd..6c8712b 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -125,7 +125,7 @@
 
 /* USB */
 #ifdef CONFIG_STK52XX
-#define CONFIG_USB_OHCI
+#define CONFIG_USB_OHCI_NEW
 #define ADD_USB_CMD		CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
 
diff --git a/include/configs/delta.h b/include/configs/delta.h
index 0617ad8..4038f21 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -103,7 +103,7 @@
 #endif
 
 /* USB */
-#define CONFIG_USB_OHCI         1
+#define CONFIG_USB_OHCI_NEW	1
 #define CONFIG_USB_STORAGE      1
 #define CONFIG_DOS_PARTITION    1
 
diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h
index d182d49..2cf78a3 100644
--- a/include/configs/mp2usb.h
+++ b/include/configs/mp2usb.h
@@ -101,7 +101,7 @@
 
 #undef	CONFIG_MODEM_SUPPORT		/* disable modem initialization stuff */
 
-#define CONFIG_USB_OHCI		1
+#define CONFIG_USB_OHCI_NEW	1
 #define CONFIG_USB_KEYBOARD	1
 #define CONFIG_USB_STORAGE	1
 #define CONFIG_DOS_PARTITION	1
diff --git a/include/configs/trab.h b/include/configs/trab.h
index 33617cd..acf86d0 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -80,7 +80,7 @@
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
 
 /* USB stuff */
-#define CONFIG_USB_OHCI		1
+#define CONFIG_USB_OHCI_NEW	1
 #define CONFIG_USB_STORAGE	1
 #define CONFIG_DOS_PARTITION	1
 
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index e6a02c6..7f434e9 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -213,7 +213,7 @@
 
 #ifdef CONFIG_440EP
 /* USB */
-#define CONFIG_USB_OHCI
+#define CONFIG_USB_OHCI_NEW
 #define CONFIG_USB_STORAGE
 
 #undef CFG_USB_OHCI_BOARD_INIT
diff --git a/include/usb.h b/include/usb.h
index bf71554..fafac89 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -169,7 +169,7 @@ struct usb_device {
  * this is how the lowlevel part communicate with the outer world
  */
 
-#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || defined (CONFIG_USB_SL811HS)
+#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || defined (CONFIG_USB_SL811HS) || defined(CONFIG_USB_OHCI_NEW)
 int usb_lowlevel_init(void);
 int usb_lowlevel_stop(void);
 int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len);
-- 
cgit v1.1


From ae3b770e4eae8e98b6e9e29662e18c47fdf0171f Mon Sep 17 00:00:00 2001
From: Markus Klotzbuecher <mk@denx.de>
Date: Mon, 27 Nov 2006 11:46:46 +0100
Subject: Fix some endianness issues related to the generic ohci driver

---
 include/configs/IceCube.h |  9 ++++++++-
 include/usb.h             | 15 +++++++++------
 2 files changed, 17 insertions(+), 7 deletions(-)

(limited to 'include')

diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 1152f83..8753b9f 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -94,9 +94,16 @@
 
 /* USB */
 #if 1
-#define CONFIG_USB_OHCI
+#define CONFIG_USB_OHCI_NEW
 #define ADD_USB_CMD             CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
+
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT
+#define CFG_USB_OHCI_REGS_BASE	MPC5XXX_USB
+#define CFG_USB_OHCI_SLOT_NAME	"mpc5200"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS	15
+
 #else
 #define ADD_USB_CMD             0
 #endif
diff --git a/include/usb.h b/include/usb.h
index fafac89..419a7e3 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -230,16 +230,12 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
 
 /* big endian -> little endian conversion */
 /* some CPUs are already little endian e.g. the ARM920T */
-#ifdef LITTLEENDIAN
-#define swap_16(x) ((unsigned short)(x))
-#define swap_32(x) ((unsigned long)(x))
-#else
-#define swap_16(x) \
+#define __swap_16(x) \
 	({ unsigned short x_ = (unsigned short)x; \
 	 (unsigned short)( \
 		((x_ & 0x00FFU) << 8) | ((x_ & 0xFF00U) >> 8) ); \
 	})
-#define swap_32(x) \
+#define __swap_32(x) \
 	({ unsigned long x_ = (unsigned long)x; \
 	 (unsigned long)( \
 		((x_ & 0x000000FFUL) << 24) | \
@@ -247,6 +243,13 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
 		((x_ & 0x00FF0000UL) >>	 8) | \
 		((x_ & 0xFF000000UL) >> 24) ); \
 	})
+
+#ifdef LITTLEENDIAN
+# define swap_16(x) (x)
+# define swap_32(x) (x)
+#else
+# define swap_16(x) __swap_16(x)
+# define swap_32(x) __swap_32(x)
 #endif /* LITTLEENDIAN */
 
 /*
-- 
cgit v1.1


From 822af351ad2babc7d99033361a5fcacd30f6bc78 Mon Sep 17 00:00:00 2001
From: Rodolfo Giometti <giometti@enneenne.com>
Date: Tue, 3 Apr 2007 14:27:18 +0200
Subject: Support for the Philips ISP116x HCD (Host Controller Driver)

Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
---
 include/usb.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'include')

diff --git a/include/usb.h b/include/usb.h
index 419a7e3..504ccc4 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -169,7 +169,10 @@ struct usb_device {
  * this is how the lowlevel part communicate with the outer world
  */
 
-#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || defined (CONFIG_USB_SL811HS) || defined(CONFIG_USB_OHCI_NEW)
+#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || \
+	defined(CONFIG_USB_OHCI_NEW) || defined (CONFIG_USB_SL811HS) || \
+	defined(CONFIG_USB_ISP116X_HCD)
+
 int usb_lowlevel_init(void);
 int usb_lowlevel_stop(void);
 int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len);
-- 
cgit v1.1


From fdcfaa1b02268b2899e374b35adf936c911a47eb Mon Sep 17 00:00:00 2001
From: Zhang Wei <wei.zhang@freescale.com>
Date: Wed, 6 Jun 2007 10:08:13 +0200
Subject: USB event poll support

This patch adds USB event poll support, which could be used in usbkbd
and other usb devices driver when the asynchronous interrupt
processing is supported.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com
---
 include/usb.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'include')

diff --git a/include/usb.h b/include/usb.h
index 504ccc4..4e1539f 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -180,6 +180,7 @@ int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 			int transfer_len,struct devrequest *setup);
 int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 			int transfer_len, int interval);
+void usb_event_poll(void);
 
 /* Defines */
 #define USB_UHCI_VEND_ID 0x8086
-- 
cgit v1.1


From a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82 Mon Sep 17 00:00:00 2001
From: Zhang Wei <wei.zhang@freescale.com>
Date: Wed, 6 Jun 2007 10:08:14 +0200
Subject: Add USB PCI-OHCI, USB keyboard and event poll support to the
 MPC8641HPCN board config file.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
---
 include/configs/MPC8641HPCN.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

(limited to 'include')

diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index bbe3505..efac4c5 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -330,6 +330,17 @@
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
 
+/************************************************************
+ * USB support
+ ************************************************************/
+#define CONFIG_PCI_OHCI		1
+#define CONFIG_USB_OHCI_NEW		1
+#define CONFIG_USB_KEYBOARD	1
+#define CFG_DEVICE_DEREGISTER
+#define CFG_USB_EVENT_POLL	1
+#define CFG_USB_OHCI_SLOT_NAME 	"ohci_pci"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+
 #if !defined(CONFIG_PCI_PNP)
     #define PCI_ENET0_IOADDR	0xe0000000
     #define PCI_ENET0_MEMADDR	0xe0000000
@@ -482,6 +493,7 @@
 				 | CFG_CMD_PCI		\
 				 | CFG_CMD_I2C		\
 				 | CFG_CMD_SCSI		\
+				 | CFG_CMD_USB		\
 				 | CFG_CMD_EXT2)	\
 				&			\
 				 ~(CFG_CMD_ENV))
@@ -499,6 +511,7 @@
 				| CFG_CMD_PING		\
 				| CFG_CMD_I2C		\
 				| CFG_CMD_SCSI		\
+				| CFG_CMD_USB		\
 				| CFG_CMD_EXT2)
   #else
     #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL		\
-- 
cgit v1.1


From 72657570b61635c74fa0c3f0e9e7d0671a9d08df Mon Sep 17 00:00:00 2001
From: Markus Klotzbuecher <mk@denx.de>
Date: Wed, 6 Jun 2007 11:49:43 +0200
Subject: USB: ohci fixes and cleanup for mpc5xxx and IceCube board config

---
 include/configs/IceCube.h | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

(limited to 'include')

diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 4132f4a..551a609 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -93,21 +93,16 @@
 #define CONFIG_ISO_PARTITION
 
 /* USB */
-#if 1
 #define CONFIG_USB_OHCI_NEW
 #define ADD_USB_CMD             CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
-
+#define CFG_OHCI_BE_CONTROLLER
 #undef CFG_USB_OHCI_BOARD_INIT
-#define CFG_USB_OHCI_CPU_INIT
+#define CFG_USB_OHCI_CPU_INIT	1
 #define CFG_USB_OHCI_REGS_BASE	MPC5XXX_USB
 #define CFG_USB_OHCI_SLOT_NAME	"mpc5200"
 #define CFG_USB_OHCI_MAX_ROOT_PORTS	15
 
-#else
-#define ADD_USB_CMD             0
-#endif
-
 #define	CONFIG_TIMESTAMP		/* Print image info with timestamp */
 
 /*
-- 
cgit v1.1


From dace45acd1c1357daa9322099d07c9a9e08b0024 Mon Sep 17 00:00:00 2001
From: Markus Klotzbuecher <mk@denx.de>
Date: Wed, 6 Jun 2007 11:49:43 +0200
Subject: USB: ohci fixes and cleanup for ppc4xx and yosemite board.

---
 include/configs/yosemite.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'include')

diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index 0a41dff..1d12758 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -234,6 +234,7 @@
 /* USB */
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_USB_STORAGE
+#define CFG_OHCI_BE_CONTROLLER
 
 #undef CFG_USB_OHCI_BOARD_INIT
 #define CFG_USB_OHCI_CPU_INIT	1
-- 
cgit v1.1


From 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243 Mon Sep 17 00:00:00 2001
From: Markus Klotzbuecher <mk@denx.de>
Date: Wed, 6 Jun 2007 11:49:44 +0200
Subject: TRAB, USB: update trab board configuration for use of generic ohci
 driver

---
 include/configs/trab.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'include')

diff --git a/include/configs/trab.h b/include/configs/trab.h
index acf86d0..f52d2de 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -86,7 +86,8 @@
 
 #undef CFG_USB_OHCI_BOARD_INIT
 #define CFG_USB_OHCI_CPU_INIT	1
-#define CFG_USB_OHCI_REGS_BASE	S3C24X0_USB_HOST_BASE
+
+#define CFG_USB_OHCI_REGS_BASE	0x14200000
 #define CFG_USB_OHCI_SLOT_NAME	"s3c2400"
 #define CFG_USB_OHCI_MAX_ROOT_PORTS	15
 
-- 
cgit v1.1