From e85390dc1d9c3c942c11bbf003e6c10a73e25ed6 Mon Sep 17 00:00:00 2001 From: wdenk Date: Mon, 1 Apr 2002 14:29:03 +0000 Subject: Initial revision --- include/ns87308.h | 250 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 250 insertions(+) create mode 100644 include/ns87308.h (limited to 'include/ns87308.h') diff --git a/include/ns87308.h b/include/ns87308.h new file mode 100644 index 0000000..feeb940 --- /dev/null +++ b/include/ns87308.h @@ -0,0 +1,250 @@ +/* + * (C) Copyright 2000 + * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _NS87308_H_ +#define _NS87308_H_ + +#include + +/* Note: I couldn't find a full data sheet for the ns87308, but the ns87307 seems to be pretty + functionally- (and pin-) equivalent to the 87308, but the 308 has better ir support. */ + +void initialise_ns87308(void); + +/* + * The following struct represents the GPIO registers on the NS87308/NS97307 + */ +struct GPIO +{ + unsigned char dta1; /* 0 data port 1 */ + unsigned char dir1; /* 1 direction port 1 */ + unsigned char out1; /* 2 output type port 1 */ + unsigned char puc1; /* 3 pull-up control port 1 */ + unsigned char dta2; /* 4 data port 2 */ + unsigned char dir2; /* 5 direction port 2 */ + unsigned char out2; /* 6 output type port 2 */ + unsigned char puc2; /* 7 pull-up control port 2 */ +}; + +/* + * The following represents the power management registers on the NS87308/NS97307 + */ +#define PWM_FER1 0 /* 0 function enable reg. 1 */ +#define PWM_FER2 1 /* 1 function enable reg. 2 */ +#define PWM_PMC1 2 /* 2 power mgmt. control 1 */ +#define PWM_PMC2 3 /* 3 power mgmt. control 2 */ +#define PWM_PMC3 4 /* 4 power mgmt. control 3 */ +#define PWM_WDTO 5 /* 5 watchdog time-out */ +#define PWM_WDCF 6 /* 6 watchdog config. */ +#define PWM_WDST 7 /* 7 watchdog status */ + +/*PNP config registers: + * these depend on the stated of BADDR1 and BADDR0 on startup + * so there's three versions here with the last two digits indicating + * for which configuration their valid + * the 1st of the two digits indicates the state of BADDR1 + * the 2st of the two digits indicates the state of BADDR0 + */ + + +#define IO_INDEX_OFFSET_0x 0x0279 /* full PnP isa Mode */ +#define IO_INDEX_OFFSET_10 0x015C /* PnP motherboard mode */ +#define IO_INDEX_OFFSET_11 0x002E /* PnP motherboard mode */ +#define IO_DATA_OFFSET_0x 0x0A79 /* full PnP isa Mode */ +#define IO_DATA_OFFSET_10 0x015D /* PnP motherboard mode */ +#define IO_DATA_OFFSET_11 0x002F /* PnP motherboard mode */ + +#if defined(CFG_NS87308_BADDR_0x) +#define IO_INDEX (CFG_ISA_IO + IO_INDEX_OFFSET_0x) +#define IO_DATA (CFG_ISA_IO + IO_DATA_OFFSET_0x) +#elif defined(CFG_NS87308_BADDR_10) +#define IO_INDEX (CFG_ISA_IO + IO_INDEX_OFFSET_10) +#define IO_DATA (CFG_ISA_IO + IO_DATA_OFFSET_10) +#elif defined(CFG_NS87308_BADDR_11) +#define IO_INDEX (CFG_ISA_IO + IO_INDEX_OFFSET_11) +#define IO_DATA (CFG_ISA_IO + IO_DATA_OFFSET_11) +#endif + +/* PnP register definitions */ + +#define SET_RD_DATA_PORT 0x00 +#define SERIAL_ISOLATION 0x01 +#define CONFIG_CONTROL 0x02 +#define WAKE_CSN 0x03 +#define RES_DATA 0x04 +#define STATUS 0x05 +#define SET_CSN 0x06 +#define LOGICAL_DEVICE 0x07 + +/*vendor defined values */ +#define SID_REG 0x20 +#define SUPOERIO_CONF1 0x21 +#define SUPOERIO_CONF2 0x22 +#define PGCS_INDEX 0x23 +#define PGCS_DATA 0x24 + +/* values above 30 are different for each logical device + but I can't be arsed to enter them all. the ones here + are pretty consistent between all logical devices + feel free to correct the situation if you want.. ;) + */ +#define ACTIVATE 0x30 +#define ACTIVATE_OFF 0x00 +#define ACTIVATE_ON 0x01 + +#define BASE_ADDR_HIGH 0x60 +#define BASE_ADDR_LOW 0x61 +#define LUN_CONFIG_REG 0xF0 +#define DBASE_HIGH 0x60 /* SIO KBC data base address, 15:8 */ +#define DBASE_LOW 0x61 /* SIO KBC data base address, 7:0 */ +#define CBASE_HIGH 0x62 /* SIO KBC command base addr, 15:8 */ +#define CBASE_LOW 0x63 /* SIO KBC command base addr, 7:0 */ + +/* the logical devices*/ +#define LDEV_KBC1 0x00 /* 2 devices for keyboard and mouse controller*/ +#define LDEV_KBC2 0x01 +#define LDEV_MOUSE 0x01 +#define LDEV_RTC_APC 0x02 /*Real Time Clock and Advanced Power Control*/ +#define LDEV_FDC 0x03 /*floppy disk controller*/ +#define LDEV_PARP 0x04 /*Parallel port*/ +#define LDEV_UART2 0x05 +#define LDEV_UART1 0x06 +#define LDEV_GPIO 0x07 /*General Purpose IO and chip select output signals*/ +#define LDEV_POWRMAN 0x08 /*Power Managment*/ + +#define CFG_NS87308_KBC1 (1 << LDEV_KBC1) +#define CFG_NS87308_KBC2 (1 << LDEV_KBC2) +#define CFG_NS87308_MOUSE (1 << LDEV_MOUSE) +#define CFG_NS87308_RTC_APC (1 << LDEV_RTC_APC) +#define CFG_NS87308_FDC (1 << LDEV_FDC) +#define CFG_NS87308_PARP (1 << LDEV_PARP) +#define CFG_NS87308_UART2 (1 << LDEV_UART2) +#define CFG_NS87308_UART1 (1 << LDEV_UART1) +#define CFG_NS87308_GPIO (1 << LDEV_GPIO) +#define CFG_NS87308_POWRMAN (1 << LDEV_POWRMAN) + +/*some functions and macro's for doing configuration */ + +static inline void read_pnp_config(unsigned char index, unsigned char *data) +{ + pci_writeb(index,IO_INDEX); + pci_readb(IO_DATA, *data); +} + +static inline void write_pnp_config(unsigned char index, unsigned char data) +{ + pci_writeb(index,IO_INDEX); + pci_writeb(data, IO_DATA); +} + +static inline void pnp_set_device(unsigned char dev) +{ + write_pnp_config(LOGICAL_DEVICE, dev); +} + +static inline void write_pm_reg(unsigned short base, unsigned char index, unsigned char data) +{ + pci_writeb(index, CFG_ISA_IO + base); + eieio(); + pci_writeb(data, CFG_ISA_IO + base + 1); +} + +/*void write_pnp_config(unsigned char index, unsigned char data); +void pnp_set_device(unsigned char dev); +*/ + +#define PNP_SET_DEVICE_BASE(dev,base) \ + pnp_set_device(dev); \ + write_pnp_config(ACTIVATE, ACTIVATE_OFF); \ + write_pnp_config(BASE_ADDR_HIGH, ((base) >> 8) & 0xff ); \ + write_pnp_config(BASE_ADDR_LOW, (base) &0xff); \ + write_pnp_config(ACTIVATE, ACTIVATE_ON); + +#define PNP_ACTIVATE_DEVICE(dev) \ + pnp_set_device(dev); \ + write_pnp_config(ACTIVATE, ACTIVATE_ON); + +#define PNP_DEACTIVATE_DEVICE(dev) \ + pnp_set_device(dev); \ + write_pnp_config(ACTIVATE, ACTIVATE_OFF); + + +static inline void write_pgcs_config(unsigned char index, unsigned char data) +{ + write_pnp_config(PGCS_INDEX, index); + write_pnp_config(PGCS_DATA, data); +} + +/* these macrose configure the 3 CS lines + on the sandpoint board these controll NVRAM + CS0 is connected to NVRAMCS + CS1 is connected to NVRAMAS0 + CS2 is connected to NVRAMAS1 + */ +#define PGCS_CS_ASSERT_ON_WRITE 0x10 +#define PGCS_CS_ASSERT_ON_READ 0x20 + +#define PNP_PGCS_CSLINE_BASE(cs, base) \ + write_pgcs_config((cs) << 2, ((base) >> 8) & 0xff ); \ + write_pgcs_config(((cs) << 2) + 1, (base) & 0xff ); + +#define PNP_PGCS_CSLINE_CONF(cs, conf) \ + write_pgcs_config(((cs) << 2) + 2, (conf) ); + + +/* The following sections are for 87308 extensions to the standard compoents it emulates */ + +/* extensions to 16550*/ + +#define MCR_MDSL_MSK 0xe0 /*mode select mask*/ +#define MCR_MDSL_UART 0x00 /*uart, default*/ +#define MCR_MDSL_SHRPIR 0x02 /*Sharp IR*/ +#define MCR_MDSL_SIR 0x03 /*SIR*/ +#define MCR_MDSL_CIR 0x06 /*Consumer IR*/ + +#define FCR_TXFTH0 0x10 /* these bits control threshod of data level in fifo */ +#define FCR_TXFTH1 0x20 /* for interrupt trigger */ + +/* + * Default NS87308 configuration + */ +#ifndef CFG_NS87308_KBC1_BASE +#define CFG_NS87308_KBC1_BASE 0x0060 +#endif +#ifndef CFG_NS87308_RTC_BASE +#define CFG_NS87308_RTC_BASE 0x0070 +#endif +#ifndef CFG_NS87308_FDC_BASE +#define CFG_NS87308_FDC_BASE 0x03F0 +#endif +#ifndef CFG_NS87308_LPT_BASE +#define CFG_NS87308_LPT_BASE 0x0278 +#endif +#ifndef CFG_NS87308_UART1_BASE +#define CFG_NS87308_UART1_BASE 0x03F8 +#endif +#ifndef CFG_NS87308_UART2_BASE +#define CFG_NS87308_UART2_BASE 0x02F8 +#endif + +#endif /*_NS87308_H_*/ -- cgit v1.1