From 216818c1a2d03b1c0994f00993c99af38c5b1e83 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 21 Jan 2010 23:29:18 -0500 Subject: Blackfin: bf537-stamp: add board test defines We tweak the configs a little when doing automated hardware tests. Signed-off-by: Mike Frysinger --- include/configs/bf537-stamp.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/configs') diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index de2add7..d3159e5 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -277,6 +277,15 @@ #define FLASH_END_POST_BLOCK 71 /* Should < = 71 */ #endif +/* These are for board tests */ +#if 0 +#define CONFIG_BOOTCOMMAND "bootldr 0x203f0100" +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_PROMPT \ + "autoboot in %d seconds: press space to stop\n", bootdelay +#define CONFIG_AUTOBOOT_STOP_STR " " +#endif + /* * Pull in common ADI header for remaining command/environment setup -- cgit v1.1 From 6a0be8f8fe6d72a30e69d08decb72dc3bec5484c Mon Sep 17 00:00:00 2001 From: Harald Krapfenbauer Date: Fri, 22 Jan 2010 17:15:55 -0500 Subject: Blackfin: cm-bf561: update network/env settings Switch to the SMC911X driver by default now, and fix LDR env settings. Signed-off-by: Harald Krapfenbauer Signed-off-by: Mike Frysinger --- include/configs/cm-bf561.h | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'include/configs') diff --git a/include/configs/cm-bf561.h b/include/configs/cm-bf561.h index 1741ed4..c60401c 100644 --- a/include/configs/cm-bf561.h +++ b/include/configs/cm-bf561.h @@ -63,14 +63,10 @@ * Network Settings */ #define ADI_CMDS_NETWORK 1 -/* The next 2 lines are for use with DEV-BF5xx */ #define CONFIG_NET_MULTI -#define CONFIG_SMC91111 1 -#define CONFIG_SMC91111_BASE 0x28000300 -/* The next 3 lines are for use with EXT-BF5xx-USB-ETH2 */ -/* #define CONFIG_DRIVER_SMC911X 1 */ -/* #define CONFIG_DRIVER_SMC911X_BASE 0x24080000 /! AMS1 */ -/* #define CONFIG_DRIVER_SMC911X_32_BIT 1 */ +#define CONFIG_SMC911X 1 +#define CONFIG_SMC911X_BASE 0x24008000 /* AMS1 */ +#define CONFIG_SMC911X_16_BIT #define CONFIG_HOSTNAME cm-bf561 /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:cf */ @@ -94,6 +90,7 @@ #define CONFIG_ENV_OFFSET 0x20000 #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x10000 +#define CONFIG_ENV_IS_EMBEDDED_IN_LDR /* -- cgit v1.1 From 3f1a5c1655d32b7ab8ae74c79934ce100ebcd2bf Mon Sep 17 00:00:00 2001 From: Brent Kandetzki Date: Wed, 24 Mar 2010 17:41:33 -0400 Subject: Blackfin: IP04: new board port A low cost 4 port IP-PBX board. Signed-off-by: Brent Kandetzki Signed-off-by: Mike Frysinger --- include/configs/ip04.h | 157 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 157 insertions(+) create mode 100644 include/configs/ip04.h (limited to 'include/configs') diff --git a/include/configs/ip04.h b/include/configs/ip04.h new file mode 100644 index 0000000..425a745 --- /dev/null +++ b/include/configs/ip04.h @@ -0,0 +1,157 @@ +/* + * U-boot - Configuration file for IP04 board (having BF532 processor) + * + * Copyright (c) 2006 Intratrade Ltd., Ivan Danov, idanov@gmail.com + * + * Copyright (c) 2005-2010 Analog Devices Inc. + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __CONFIG_IP04_H__ +#define __CONFIG_IP04_H__ + +#include + + +/* + * Processor Settings + */ +#define CONFIG_BFIN_CPU bf532-0.5 +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_NAND + + +/* + * Clock Settings + * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV + * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV + */ +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 10000000 +/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ +/* 1 = CLKIN / 2 */ +#define CONFIG_CLKIN_HALF 0 +/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ +/* 1 = bypass PLL */ +#define CONFIG_PLL_BYPASS 0 +/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ +/* Values can range from 0-63 (where 0 means 64) */ +#define CONFIG_VCO_MULT 40 +/* CCLK_DIV controls the core clock divider */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* SCLK_DIV controls the system clock divider */ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 3 + + +/* + * Memory Settings + */ +#define CONFIG_MEM_ADD_WDTH 10 +#define CONFIG_MEM_SIZE 64 + +#define CONFIG_EBIU_SDRRC_VAL 0x408 +#define CONFIG_EBIU_SDGCTL_VAL 0x9111cd + +#define CONFIG_EBIU_AMGCTL_VAL 0xFF +#define CONFIG_EBIU_AMBCTL0_VAL 0xffc2ffc2 +#define CONFIG_EBIU_AMBCTL1_VAL 0xffc2ffc2 + +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) +#define CONFIG_SYS_MALLOC_LEN (128 * 1024) + + +/* + * Network Settings + */ +#define ADI_CMDS_NETWORK 1 +#define CONFIG_NET_MULTI 1 +#define CONFIG_HOSTNAME IP04 + +#define CONFIG_DRIVER_DM9000 1 +#define CONFIG_DM9000_NO_SROM +#define CONFIG_DM9000_BASE 0x20100000 +#define DM9000_IO CONFIG_DM9000_BASE +#define DM9000_DATA (CONFIG_DM9000_BASE + 2) + + +/* + * Flash Settings + */ +#define CONFIG_ENV_OVERWRITE 1 +#define CONFIG_SYS_NO_FLASH /* we have only NAND */ + + +/* + * SPI Settings + */ +#define CONFIG_BFIN_SPI +#define CONFIG_ENV_SPI_MAX_HZ 30000000 +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_WINBOND + + +/* + * Env Storage Settings + */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_PREBOOT "echo starting from spi flash" +#define CONFIG_ENV_OFFSET 0x30000 +#define CONFIG_ENV_SIZE 0x10000 +#define CONFIG_ENV_SECT_SIZE 0x10000 + + +/* + * NAND Settings + */ +#define CONFIG_NAND_PLAT +#define CONFIG_SYS_NAND_BASE 0x20000000 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +#define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2)) +#define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1)) +#define BFIN_NAND_READY PF10 +#define BFIN_NAND_WRITE(addr, cmd) \ + do { \ + bfin_write8(addr, cmd); \ + SSYNC(); \ + } while (0) + +#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd) +#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd) +#define NAND_PLAT_DEV_READY(chip) (bfin_read_FIO_FLAG_D() & BFIN_NAND_READY) +#define NAND_PLAT_INIT() \ + do { \ + bfin_write_FIO_DIR(bfin_read_FIO_DIR() & ~BFIN_NAND_READY); \ + bfin_write_FIO_INEN(bfin_read_FIO_INEN() | BFIN_NAND_READY); \ + bfin_write_FIO_EDGE(bfin_read_FIO_EDGE() & ~BFIN_NAND_READY); \ + bfin_write_FIO_POLAR(bfin_read_FIO_POLAR() & ~BFIN_NAND_READY); \ + } while (0) + + +/* + * Misc Settings + */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_MISC_INIT_R /* needed for MAC address */ +#define CONFIG_UART_CONSOLE 0 + +#undef CONFIG_SHOW_BOOT_PROGRESS +/* Enable this if bootretry required; currently it's disabled */ +#define CONFIG_BOOT_RETRY_TIME -1 +#define CONFIG_BOOTCOMMAND "run nandboot" +#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" + + +/* + * Pull in common ADI header for remaining command/environment setup + */ +#include + +#endif -- cgit v1.1