From ddde6b7cf8341a15ad46551dc611488e9a3f36e6 Mon Sep 17 00:00:00 2001
From: Bartlomiej Sieka <tur@semihalf.com>
Date: Tue, 22 Aug 2006 10:38:18 +0200
Subject: Add a fix for a buggy USB device on the FO300 board.

---
 include/configs/TQM5200.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'include/configs')

diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index f157d42..89ec1bf 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -63,7 +63,7 @@
 #define CFG_DEVICE_NULLDEV		1	/* enable null device */
 #define CONFIG_SILENT_CONSOLE		1	/* enable silent startup */
 #define CONFIG_BOARD_EARLY_INIT_F	1	/* used to detect S1 switch position */
-
+#define CONFIG_USB_BIN_FIXUP		1	/* for a buggy USB device */
 #if 0
 #define FO300_SILENT_CONSOLE_WHEN_S1_CLOSED	1	/* silent console on PSC1 when S1 */
 							/* switch is closed */
-- 
cgit v1.1


From ed1cf8456f2a5a4efdb4bb3d04b503d78f410e9c Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@pollux.denx.de>
Date: Thu, 24 Aug 2006 00:26:42 +0200
Subject: Updates for MCC200 / PRS200 boards: - support for configurations with
 SDRAM or DDR memory, - support for highboot and lowboot - adjusting
 environment definitions

---
 include/configs/mcc200.h | 57 +++++++++++++++++++++++++++++++++---------------
 1 file changed, 40 insertions(+), 17 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index 563f797..aead49a 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -55,16 +55,28 @@
  *
  *  CONFIG_PSC_CONSOLE must be undefined in this case.
  */
+#if !defined(CONFIG_PRS200)
+/* MCC200 configuration: */
 #ifdef CONFIG_CONSOLE_COM12
 #define CONFIG_QUART_CONSOLE	6	/* console is on UARTF of QUART2	*/
 #else
 #define CONFIG_QUART_CONSOLE	8	/* console is on UARTH of QUART2	*/
 #endif
+#else
+/* PRS200 configuration: */
+#undef CONFIG_QUART_CONSOLE
+#endif /* CONFIG_PRS200 */
 /*
  *  To select console on PSC1, define CONFIG_PSC_CONSOLE as 1
  * and undefine CONFIG_QUART_CONSOLE.
  */
-/*#define CONFIG_PSC_CONSOLE	1	*/ /* console is on PSC1		*/
+#if !defined(CONFIG_PRS200)
+/* MCC200 configuration: */
+#undef CONFIG_PSC_CONSOLE
+#else
+/* PRS200 configuration: */
+#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1		*/
+#endif
 #if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE)
 #error "Select only one console device!"
 #endif
@@ -103,33 +115,44 @@
 
 #undef	CONFIG_BOOTARGS
 
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
+#define XMK_STR(x)	#x
+#define MK_STR(x)	XMK_STR(x)
+
+#ifdef CONFIG_PRS200
+# define CFG__BOARDNAME "prs200"
+#else
+# define CFG__BOARDNAME "mcc200"
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
-	"hostname=mcc200\0"						\
+	"hostname=" CFG__BOARDNAME "\0"					\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=${serverip}:${rootpath}\0"			\
 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
 	"addip=setenv bootargs ${bootargs} "				\
 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
 		":${hostname}:${netdev}:off panic=1\0"			\
-	"flash_nfs=run nfsargs addip;"					\
+	"addcons=etenv bootargs ${bootargs} "				\
+		"console=${console},${baudrate}\0"			\
+	"flash_nfs=run nfsargs addip addcons;"				\
 		"bootm ${kernel_addr}\0"				\
-	"flash_self=run ramargs addip;"					\
+	"flash_self=run ramargs addip addcons;"				\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
+	"net_nfs=tftp 200000 ${bootfile};"				\
+		"run nfsargs addip addcons;bootm\0"			\
+	"console=ttyS0\0"						\
 	"rootpath=/opt/eldk/ppc_6xx\0"					\
-	"bootfile=/tftpboot/mcc200/uImage\0"				\
-	"baudrate=115200\0"						\
-	"load=tftp 200000 /tftpboot/mcc200/u-boot.bin\0"		\
-	"update=protect off FFF00000 +${filesize};"			\
-		"era FFF00000 +${filesize};"				\
-		"cp.b 200000 FFF00000 ${filesize}\0"		        \
-	"serverip=192.168.1.1\0"					\
-	"ipaddr=192.168.133.144\0"					\
-	"netmask=255.255.0.0\0"						\
+	"bootfile=/tftpboot/" CFG__BOARDNAME "/uImage\0"		\
+	"load=tftp 200000 /tftpboot/" CFG__BOARDNAME "/u-boot.bin\0"	\
+	"text_base=" MK_STR(TEXT_BASE) "\0"				\
+	"update=protect off ${text_base} +${filesize};"			\
+		"era ${text_base} +${filesize};"			\
+		"cp.b 200000 ${text_base} ${filesize}\0"		\
 	"unlock=yes\0"							\
-	"ethaddr=00:02:44:7D:73:3B\0"					\
 	""
+#undef MK_STR
+#undef XMK_STR
 
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -314,7 +337,7 @@
  * One of four SC16C554 UARTs is selected with
  * A3-A4 (DA5-DA6) lines.
  */
-#if (CONFIG_QUART_CONSOLE > 0) && (CONFIG_QUART_CONSOLE < 5)
+#if (CONFIG_QUART_CONSOLE > 0) && (CONFIG_QUART_CONSOLE < 5) && !defined(CONFIG_PRS200)
 #define CFG_NS16550_COM1	(CFG_CS2_START | (CONFIG_QUART_CONSOLE - 1)<<5)
 #elif (CONFIG_QUART_CONSOLE > 4) && (CONFIG_QUART_CONSOLE < 9)
 #define CFG_NS16550_COM1	(CFG_CS1_START | (CONFIG_QUART_CONSOLE - 5)<<5)
-- 
cgit v1.1


From 113f64e09ac4905ddc330181c8761a4b29e82394 Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@pollux.denx.de>
Date: Fri, 25 Aug 2006 01:38:04 +0200
Subject: Update for MCC200 / PRS200 boards: - auto-adjust console device for
 Linux. - fix typos.

---
 include/configs/mcc200.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index aead49a..df3d68e 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -120,8 +120,10 @@
 
 #ifdef CONFIG_PRS200
 # define CFG__BOARDNAME "prs200"
+# define LINUX_CONSOLE  "ttyS0"
 #else
 # define CFG__BOARDNAME "mcc200"
+# define LINUX_CONSOLE  "ttyEU7"
 #endif
 
 #define CONFIG_EXTRA_ENV_SETTINGS					\
@@ -133,7 +135,7 @@
 	"addip=setenv bootargs ${bootargs} "				\
 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
 		":${hostname}:${netdev}:off panic=1\0"			\
-	"addcons=etenv bootargs ${bootargs} "				\
+	"addcons=setenv bootargs ${bootargs} "				\
 		"console=${console},${baudrate}\0"			\
 	"flash_nfs=run nfsargs addip addcons;"				\
 		"bootm ${kernel_addr}\0"				\
@@ -141,7 +143,7 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};"				\
 		"run nfsargs addip addcons;bootm\0"			\
-	"console=ttyS0\0"						\
+	"console=" MK_STR(LINUX_CONSOLE) "\0"				\
 	"rootpath=/opt/eldk/ppc_6xx\0"					\
 	"bootfile=/tftpboot/" CFG__BOARDNAME "/uImage\0"		\
 	"load=tftp 200000 /tftpboot/" CFG__BOARDNAME "/u-boot.bin\0"	\
-- 
cgit v1.1


From 3b0ff842bf70baf1f370c8e76e8f33a0f9904c1b Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@nyx.denx.de>
Date: Fri, 25 Aug 2006 11:47:06 +0200
Subject: Fix typo in MCC200/PRS200 configuration

---
 include/configs/mcc200.h | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index df3d68e..14a5bae 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -115,15 +115,15 @@
 
 #undef	CONFIG_BOOTARGS
 
-#define XMK_STR(x)	#x
-#define MK_STR(x)	XMK_STR(x)
+#define XMK_STR(x)		#x
+#define MK_STR(x)		XMK_STR(x)
 
 #ifdef CONFIG_PRS200
-# define CFG__BOARDNAME "prs200"
-# define LINUX_CONSOLE  "ttyS0"
+# define CFG__BOARDNAME		"prs200"
+# define CFG__LINUX_CONSOLE	"ttyS0"
 #else
-# define CFG__BOARDNAME "mcc200"
-# define LINUX_CONSOLE  "ttyEU7"
+# define CFG__BOARDNAME		"mcc200"
+# define CFG__LINUX_CONSOLE	"ttyEU7"
 #endif
 
 #define CONFIG_EXTRA_ENV_SETTINGS					\
@@ -143,7 +143,7 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};"				\
 		"run nfsargs addip addcons;bootm\0"			\
-	"console=" MK_STR(LINUX_CONSOLE) "\0"				\
+	"console=" LINUX_CONSOLE "\0"				\
 	"rootpath=/opt/eldk/ppc_6xx\0"					\
 	"bootfile=/tftpboot/" CFG__BOARDNAME "/uImage\0"		\
 	"load=tftp 200000 /tftpboot/" CFG__BOARDNAME "/u-boot.bin\0"	\
-- 
cgit v1.1


From 16850919ff8666f20d047cb83b4ee77581336515 Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@pollux.denx.de>
Date: Sun, 27 Aug 2006 18:10:01 +0200
Subject: Code cleanup

---
 include/configs/CPU87.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'include/configs')

diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h
index 7a1dada..ce969ec 100644
--- a/include/configs/CPU87.h
+++ b/include/configs/CPU87.h
@@ -527,7 +527,7 @@
 			 PSDMR_LDOTOPRE_1C		|\
 			 PSDMR_WRC_1C			|\
 			 PSDMR_CL_2)
-			 
+
 /*
  * Init Memory Controller:
  *
-- 
cgit v1.1


From 21a9cc028d00c50f542e25d58201e3debecd5166 Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@pollux.denx.de>
Date: Tue, 29 Aug 2006 10:49:11 +0200
Subject: Fix typo.

---
 include/configs/mcc200.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'include/configs')

diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index 14a5bae..fc5781e 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -143,7 +143,7 @@
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"net_nfs=tftp 200000 ${bootfile};"				\
 		"run nfsargs addip addcons;bootm\0"			\
-	"console=" LINUX_CONSOLE "\0"				\
+	"console=" CFG__LINUX_CONSOLE "\0"				\
 	"rootpath=/opt/eldk/ppc_6xx\0"					\
 	"bootfile=/tftpboot/" CFG__BOARDNAME "/uImage\0"		\
 	"load=tftp 200000 /tftpboot/" CFG__BOARDNAME "/u-boot.bin\0"	\
-- 
cgit v1.1


From 0fd30252c840ee54d2a80475d6504766d43b8add Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@pollux.denx.de>
Date: Wed, 30 Aug 2006 23:02:10 +0200
Subject: Make the serial driver framework work with CONFIG_SERIAL_MULTI
 enabled

---
 include/configs/mcc200.h | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index fc5781e..61014ec 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -72,12 +72,15 @@
  */
 #if !defined(CONFIG_PRS200)
 /* MCC200 configuration: */
-#undef CONFIG_PSC_CONSOLE
+#define CONFIG_SERIAL_MULTI	1
+#define CONFIG_PSC_CONSOLE	1	/* PSC1 may be COM */
+#define CONFIG_PSC_CONSOLE2	2	/* PSC2 is PSoC */
 #else
 /* PRS200 configuration: */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1		*/
 #endif
-#if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE)
+#if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE) && \
+	!defined(CONFIG_SERIAL_MULTI)
 #error "Select only one console device!"
 #endif
 #define CONFIG_BAUDRATE		115200
-- 
cgit v1.1


From e8143e72e1cbe2f771258533e26ee2105a8768a7 Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@pollux.denx.de>
Date: Wed, 30 Aug 2006 23:09:00 +0200
Subject: Add splashscreen support for MCC200 board.

---
 include/configs/mcc200.h | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

(limited to 'include/configs')

diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index 61014ec..e95d68b 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -259,11 +259,26 @@
 #define CONFIG_PHY_ADDR		1
 
 /*
+ * LCD Splash Screen
+ */
+#define CONFIG_LCD		1
+#if defined(CONFIG_LCD)
+#define CONFIG_SPLASH_SCREEN	1
+#define CFG_CONSOLE_IS_IN_ENV	1
+#define LCD_BPP		LCD_MONOCHROME
+#endif
+
+/*
  * GPIO configuration
  */
 /* 0x10000004 = 32MB SDRAM */
 /* 0x90000004 = 64MB SDRAM */
+#if defined(CONFIG_LCD)
+/* set PSC2 in UART mode */
+#define CFG_GPS_PORT_CONFIG	0x00000044
+#else
 #define CFG_GPS_PORT_CONFIG	0x00000004
+#endif
 
 /*
  * Miscellaneous configurable options
-- 
cgit v1.1


From 360b4103677b27ad4018174a1d186218969d83a1 Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@pollux.denx.de>
Date: Sun, 3 Sep 2006 18:17:46 +0200
Subject: Fixed problems on PRS200 board caused by adding splash screen on
 MCC200

---
 include/configs/mcc200.h | 41 ++++++++++++++++++++++-------------------
 1 file changed, 22 insertions(+), 19 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index e95d68b..0c935bf 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -37,12 +37,12 @@
 
 #define CONFIG_MISC_INIT_R
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH 	*/
-#define BOOTFLAG_WARM		0x02	/* Software reboot	     		*/
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs 			*/
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value 	*/
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /*
@@ -92,7 +92,7 @@
 
 /* USB */
 #define CONFIG_USB_OHCI
-#define ADD_USB_CMD             CFG_CMD_USB | CFG_CMD_FAT
+#define ADD_USB_CMD		CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
 
 /*
@@ -167,7 +167,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133   		/* define for 133MHz speed */
+#define CFG_IPBSPEED_133		/* define for 133MHz speed */
 
 /*
  * I2C configuration
@@ -183,9 +183,9 @@
  * TEXT base always at 0xFFF00000
  * ENV_ADDR always at  0xFFF40000
  * FLASH_BASE at 0xFC000000 for 64 MB (only 32MB are supported, not enough addr lines!!!)
- *               0xFE000000 for 32 MB
- *               0xFF000000 for 16 MB
- *               0xFF800000 for  8 MB
+ *		 0xFE000000 for 32 MB
+ *		 0xFF000000 for 16 MB
+ *		 0xFF800000 for  8 MB
  */
 #define CFG_FLASH_BASE		0xfc000000
 #define CFG_FLASH_SIZE		0x04000000
@@ -207,9 +207,9 @@
 #define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 #define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
 
-#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#define CFG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars	*/
 
-#define CFG_ENV_SECT_SIZE	0x40000 	/* size of one complete sector	*/
+#define CFG_ENV_SECT_SIZE	0x40000	/* size of one complete sector	*/
 #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
 #define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
@@ -239,7 +239,7 @@
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_BASE    TEXT_BASE
+#define CFG_MONITOR_BASE	TEXT_BASE
 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
 #   define CFG_RAMBOOT		1
 #endif
@@ -261,11 +261,14 @@
 /*
  * LCD Splash Screen
  */
+#if !defined(CONFIG_PRS200)
 #define CONFIG_LCD		1
+#endif
+
 #if defined(CONFIG_LCD)
 #define CONFIG_SPLASH_SCREEN	1
 #define CFG_CONSOLE_IS_IN_ENV	1
-#define LCD_BPP		LCD_MONOCHROME
+#define LCD_BPP			LCD_MONOCHROME
 #endif
 
 /*
@@ -283,18 +286,18 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory	    */
-#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
 #else
-#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#define CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
 #endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size	*/
 #define CFG_MAXARGS		16		/* max number of command args	*/
 #define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
 
-#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
+#define CFG_MEMTEST_START	0x00100000	/* memtest works on	*/
 #define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
 
 #define CFG_LOAD_ADDR		0x100000	/* default load address */
-- 
cgit v1.1


From f60ba0d35e13e9dcf839d4563f9436d07468b1ef Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@pollux.denx.de>
Date: Mon, 4 Sep 2006 02:01:27 +0200
Subject: Fix build problems on sorcery board.

---
 include/configs/sorcery.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'include/configs')

diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h
index 3d907f8..4937638 100644
--- a/include/configs/sorcery.h
+++ b/include/configs/sorcery.h
@@ -261,6 +261,7 @@
 #define CONFIG_MPC8220_FEC	1
 #define CONFIG_FEC_10MBIT	1 /* Workaround for FEC 100Mbit problem */
 #define CONFIG_PHY_ADDR		0x1F
+#define CONFIG_MII		1
 
 /*
  * Miscellaneous configurable options
-- 
cgit v1.1


From 887e2ec9ecf49366a60a49b32b73825804909865 Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Thu, 7 Sep 2006 11:51:23 +0200
Subject: Add support for AMCC Sequoia PPC440EPx eval board - Add support for
 PPC440EPx & PPC440GRx - Add support for PPC440EP(x)/GR(x) NAND controller  
 in cpu/ppc4xx directory - Add NAND boot functionality for Sequoia board,  
 please see doc/README.nand-boot-ppc440 for details - This Sequoia NAND image
 doesn't support environment   in NAND for now. This will be added in a short
 while. Patch by Stefan Roese, 07 Sep 2006

---
 include/configs/bamboo.h      |   1 +
 include/configs/pcs440ep.h    |   1 +
 include/configs/sequoia.h     | 431 ++++++++++++++++++++++++++++++++++++++++++
 include/configs/yellowstone.h |   1 +
 include/configs/yosemite.h    |   1 +
 5 files changed, 435 insertions(+)
 create mode 100644 include/configs/sequoia.h

(limited to 'include/configs')

diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index cd4339b..4961011 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -73,6 +73,7 @@
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in SDRAM)
  *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
 #define CFG_INIT_RAM_ADDR	0x70000000		/* DCache       */
 #define CFG_INIT_RAM_END	(4 << 10)
 #define CFG_GBL_DATA_SIZE	256		    	/* num bytes initial data	*/
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 50c1c4f..23bdfc8 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -63,6 +63,7 @@
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in SDRAM)
  *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
 #define CFG_INIT_RAM_ADDR	0x70000000		/* DCache       */
 #define CFG_INIT_RAM_END	(8 << 10)
 #define CFG_GBL_DATA_SIZE	256			/* num bytes initial data*/
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
new file mode 100644
index 0000000..d3fcc03
--- /dev/null
+++ b/include/configs/sequoia.h
@@ -0,0 +1,431 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * sequoia.h - configuration for Sequoia board (PowerPC440EPx)
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_SEQUOIA		1		/* Board is Sequoia	*/
+#define CONFIG_440EPX		1		/* Specific PPC440EPx	*/
+#define CONFIG_4xx		1		/* ... PPC4xx family	*/
+#define CONFIG_SYS_CLK_FREQ	33333333	/* external freq to pll	*/
+
+#define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R	1		/* Call misc_init_r	*/
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN		(384 * 1024)	/* Reserve 384 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
+
+#define CFG_BOOT_BASE_ADDR	0xf0000000
+#define CFG_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
+#define CFG_FLASH_BASE		0xfe000000	/* start of FLASH	*/
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_NAND_ADDR		0xd0000000      /* NAND Flash		*/
+#define CFG_OCM_BASE		0xe0010000      /* ocm			*/
+#define CFG_PCI_BASE		0xe0000000      /* Internal PCI regs	*/
+#define CFG_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
+#define CFG_PCI_MEMBASE1	CFG_PCI_MEMBASE  + 0x10000000
+#define CFG_PCI_MEMBASE2	CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3	CFG_PCI_MEMBASE2 + 0x10000000
+
+/* Don't change either of these */
+#define CFG_PERIPHERAL_BASE	0xef600000	/* internal peripherals	*/
+
+#define CFG_USB2D0_BASE		0xe0000100
+#define CFG_USB_DEVICE		0xe0000000
+#define CFG_USB_HOST		0xe0000400
+#define CFG_BCSR_BASE		0xc0000000
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer
+ *----------------------------------------------------------------------*/
+#if 0
+/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache	*/
+#define CFG_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
+#define CFG_INIT_RAM_ADDR	0x70000000	/* DCache		*/
+#else
+#define CFG_INIT_RAM_OCM	1		/* OCM as init ram	*/
+#define CFG_INIT_RAM_ADDR	CFG_OCM_BASE	/* OCM			*/
+#endif
+
+#define CFG_INIT_RAM_END	(4 << 10)
+#define CFG_GBL_DATA_SIZE	256		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CFG_EXT_SERIAL_CLOCK	11059200	/* ext. 11.059MHz clk	*/
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SERIAL_MULTI     1
+/* define this if you want console on UART1 */
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE						\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+/*
+ * Define here the location of the environment variables (FLASH or EEPROM).
+ * Note: DENX encourages to use redundant environment in FLASH.
+ */
+#if 1 /* test-only */
+#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#else
+#define CFG_ENV_IS_IN_NAND	1	/* use NAND for environment vars	*/
+#endif
+#if 0
+#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars	*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_CFI				/* The flash is CFI compatible	*/
+#define CFG_FLASH_CFI_DRIVER			/* Use common CFI driver	*/
+
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+#define CFG_FLASH_PROTECTION	1	/* use hardware flash protection	*/
+
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x20000 	/* size of one complete sector	*/
+#define CFG_ENV_ADDR		((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * NAND FLASH
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_NAND_DEVICE	1
+#define NAND_MAX_CHIPS		1
+#define CFG_NAND_BASE		CFG_NAND_ADDR
+
+/*
+ * IPL (Initial Program Loader, integrated inside CPU)
+ * Will load first 4k from NAND (SPL) into cache and execute it from there.
+ *
+ * SPL (Secondary Program Loader)
+ * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
+ * has to fit into 4kByte. It sets up the CPU and configures the SDRAM
+ * controller and the NAND controller so that the special U-Boot image can be
+ * loaded from NAND to SDRAM.
+ *
+ * NUB (NAND U-Boot)
+ * This NAND U-Boot (NUB) is a special U-Boot version which can be started
+ * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
+ *
+ * On 440EPx the SPL is copied to SDRAM before the NAND controller is
+ * set up. While still running from cache, I experienced problems accessing
+ * the NAND controller.	sr - 2006-08-25
+ */
+#define CFG_NAND_BOOT_SPL_SRC	0xfffff000	/* SPL location			*/
+#define CFG_NAND_BOOT_SPL_SIZE	(4 << 10)	/* SPL size			*/
+#define CFG_NAND_BOOT_SPL_DST	(CFG_OCM_BASE + (12 << 10)) /* Copy SPL here	*/
+#define CFG_NAND_U_BOOT_DST	0x01000000	/* Load NUB to this addr	*/
+#define CFG_NAND_U_BOOT_START	CFG_NAND_U_BOOT_DST /* Start NUB from this addr	*/
+#define CFG_NAND_BOOT_SPL_DELTA	(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)
+
+/*
+ * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
+ */
+#define CFG_NAND_U_BOOT_OFFS	(16 << 10)	/* Offset to RAM U-Boot image	*/
+#define CFG_NAND_U_BOOT_SIZE	(384 << 10)	/* Size of RAM U-Boot image	*/
+
+/*
+ * Now the NAND chip has to be defined (no autodetection used!)
+ */
+#define CFG_NAND_PAGE_SIZE	(512)		/* NAND chip page size		*/
+#define CFG_NAND_BLOCK_SIZE	(16 << 10)	/* NAND chip block size		*/
+#define CFG_NAND_PAGE_COUNT	(32)		/* NAND chip page count		*/
+#define CFG_NAND_BAD_BLOCK_POS	(5)		/* Location of bad block marker	*/
+#undef CFG_NAND_4_ADDR_CYCLE			/* No fourth addr used (<=32MB)	*/
+
+#ifdef CFG_ENV_IS_IN_NAND
+#define CFG_ENV_SIZE		0x4000
+#define CFG_ENV_OFFSET		(CFG_NAND_U_BOOT_OFFS + CFG_NAND_U_BOOT_SIZE)
+#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET + CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CFG_MBYTES_SDRAM        (256)    /* 256MB			*/
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C		1		/* I2C with hardware support	*/
+#undef	CONFIG_SOFT_I2C				/* I2C bit-banged		*/
+#define CFG_I2C_SPEED		400000		/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+#ifdef CFG_ENV_IS_IN_EEPROM
+#define CFG_ENV_SIZE		0x200		/* Size of Environment vars	*/
+#define CFG_ENV_OFFSET		0x0
+#endif /* CFG_ENV_IS_IN_EEPROM */
+
+/* I2C SYSMON (LM75, AD7414 is almost compatible)			*/
+#define CONFIG_DTT_LM75		1		/* ON Semi's LM75	*/
+#define CONFIG_DTT_AD7414	1		/* use AD7414		*/
+#define CONFIG_DTT_SENSORS	{0}		/* Sensor addresses	*/
+#define CFG_DTT_MAX_TEMP	70
+#define CFG_DTT_LOW_TEMP	-30
+#define CFG_DTT_HYSTERESIS	3
+
+#define CONFIG_PREBOOT	"echo;"						\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"hostname=sequoia\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
+	        "bootm\0"						\
+	"rootpath=/opt/eldk/ppc_4xx\0"					\
+	"bootfile=/tftpboot/sequoia/uImage\0"				\
+	"kernel_addr=FE000000\0"					\
+	"ramdisk_addr=FE180000\0"					\
+	"load=tftp 100000 /tftpboot/sequoia/u-boot.bin\0"		\
+	"update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;"	\
+		"cp.b 100000 FFFA0000 60000\0"			        \
+	"upd=run load;run update\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#if 0
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
+#else
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+#endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+
+#define CONFIG_M88E1111_PHY	1
+#define	CONFIG_IBM_EMAC4_V4	1
+#define CONFIG_MII		1	/* MII PHY management		*/
+#define CONFIG_PHY_ADDR		0	/* PHY address, See schematics	*/
+
+#define CONFIG_PHY_RESET        1	/* reset phy upon startup         */
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+
+#define CONFIG_HAS_ETH0
+#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NET_MULTI	1
+#define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"	*/
+#define CONFIG_PHY1_ADDR	1
+
+/* USB */
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+/* Comment this out to enable USB 1.1 device */
+#define USB_2_0_DEVICE
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#define CONFIG_COMMANDS       (CONFIG_CMD_DFL	|	\
+			       CFG_CMD_ASKENV	|	\
+			       CFG_CMD_DHCP	|	\
+			       CFG_CMD_DTT	|	\
+			       CFG_CMD_DIAG	|	\
+			       CFG_CMD_EEPROM	|	\
+			       CFG_CMD_ELF	|	\
+			       CFG_CMD_FAT	|	\
+			       CFG_CMD_I2C	|	\
+			       CFG_CMD_IRQ	|	\
+			       CFG_CMD_MII	|	\
+			       CFG_CMD_NAND	|	\
+			       CFG_CMD_NET	|	\
+			       CFG_CMD_NFS	|	\
+			       CFG_CMD_PCI	|	\
+			       CFG_CMD_PING	|	\
+			       CFG_CMD_REGINFO	|	\
+			       CFG_CMD_SDRAM	|	\
+			       CFG_CMD_USB    )
+
+#define CONFIG_SUPPORT_VFAT
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	        "=> "	/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	        1024	/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	        256	/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	        16	/* max number of command args	*/
+#define CFG_BARGSIZE	        CFG_CBSIZE /* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0400000 /* memtest works on		*/
+#define CFG_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000  /* default load address	*/
+#define CFG_EXTBDINFO		1	/* To use extended board_into (bd_t) */
+
+#define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks	*/
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *----------------------------------------------------------------------*/
+/* General PCI */
+#define CONFIG_PCI			/* include pci support	        */
+#define CONFIG_PCI_PNP			/* do (not) pci plug-and-play   */
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup  */
+#define CFG_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT		/* enable board pci_pre_init()	*/
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC				*/
+#define CFG_PCI_SUBSYS_ID       0xcafe	/* Whatever			*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH		CFG_FLASH_BASE
+#define CFG_NAND		0xD0000000
+#define CFG_CPLD		0xC0000000
+
+/*
+ * On Sequoia CS0 and CS3 are switched when configuring for NAND booting
+ */
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CFG_NAND_CS		3		/* NAND chip connected to CSx	*/
+/* Memory Bank 0 (NOR-FLASH) initialization					*/
+#define CFG_EBC_PB0AP		0x03017300
+#define CFG_EBC_PB0CR		(CFG_FLASH | 0xba000)
+
+/* Memory Bank 3 (NAND-FLASH) initialization					*/
+#define CFG_EBC_PB3AP		0x018003c0
+#define CFG_EBC_PB3CR		(CFG_NAND | 0x1c000)
+#else
+#define CFG_NAND_CS		0		/* NAND chip connected to CSx	*/
+/* Memory Bank 3 (NOR-FLASH) initialization					*/
+#define CFG_EBC_PB3AP		0x03017300
+#define CFG_EBC_PB3CR		(CFG_FLASH | 0xba000)
+
+/* Memory Bank 0 (NAND-FLASH) initialization					*/
+#define CFG_EBC_PB0AP		0x018003c0
+#define CFG_EBC_PB0CR		(CFG_NAND | 0x1c000)
+#endif
+
+/* Memory Bank 2 (CPLD) initialization						*/
+#define CFG_EBC_PB2AP		0x24814580
+#define CFG_EBC_PB2CR		(CFG_CPLD | 0x38000)
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ *----------------------------------------------------------------------*/
+#define CFG_DCACHE_SIZE		(32<<10)  /* For AMCC 440 CPUs			*/
+#define CFG_CACHELINE_SIZE	32	      /* ...			            */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	      /* log base 2 of the above value	*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	    /* which serial port to use */
+#endif
+#endif	/* __CONFIG_H */
diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h
index cf42b66..bcafd8b 100644
--- a/include/configs/yellowstone.h
+++ b/include/configs/yellowstone.h
@@ -65,6 +65,7 @@
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in SDRAM)
  *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
 #define CFG_INIT_RAM_ADDR	0x70000000		/* DCache       */
 #define CFG_INIT_RAM_END	(8 << 10)
 #define CFG_GBL_DATA_SIZE	256			/* num bytes initial data*/
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index 86a85b8..3d7b4a2 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -65,6 +65,7 @@
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in SDRAM)
  *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
 #define CFG_INIT_RAM_ADDR	0x70000000		/* DCache       */
 #define CFG_INIT_RAM_END	(8 << 10)
 #define CFG_GBL_DATA_SIZE	256			/* num bytes initial data*/
-- 
cgit v1.1


From 8cacfb85a89f9136d685697eb2c97dae5bddfe8d Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Thu, 7 Sep 2006 12:23:02 +0200
Subject: Change Yellowstone to use CFI write buffer Patch by Stefan Roese, 07
 Aug 2006

---
 include/configs/yellowstone.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'include/configs')

diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h
index bcafd8b..ba27f37 100644
--- a/include/configs/yellowstone.h
+++ b/include/configs/yellowstone.h
@@ -110,6 +110,8 @@
 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
+#define CFG_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
+
 #define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
 
 #ifdef CFG_ENV_IS_IN_FLASH
-- 
cgit v1.1


From efa20585b3ccfdde431c19c6a9d9d8dae46fe5bb Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Thu, 7 Sep 2006 12:48:49 +0200
Subject: Fix build problem with CPCI440 Patch by Stefan Roese, 07 Sep 2006

---
 include/configs/CPCI440.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'include/configs')

diff --git a/include/configs/CPCI440.h b/include/configs/CPCI440.h
index a5bc773..90d3a8d 100644
--- a/include/configs/CPCI440.h
+++ b/include/configs/CPCI440.h
@@ -31,7 +31,8 @@
 /*-----------------------------------------------------------------------
  * High Level Configuration Options
  *----------------------------------------------------------------------*/
-#define CONFIG_EBONY		1	    /* Board is ebony		*/
+#define CONFIG_CPCI440		1	    /* Board is ebony		*/
+#define CONFIG_440GP		1	    /* Specifc GP support	*/
 #define CONFIG_4xx		1	    /* ... PPC4xx family	*/
 #define CONFIG_BOARD_EARLY_INIT_F 1	    /* Call board_early_init_f	*/
 #undef	CFG_DRAM_TEST			    /* Disable-takes long time! */
-- 
cgit v1.1


From d12ae80889568365ecb9e6698322f9771ae76dde Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Tue, 12 Sep 2006 20:19:10 +0200
Subject: Add NAND environment support for PPC440EPx Sequoia NAND boot config
 Patch by Stefan Roese, 12 Sep 2006

---
 include/configs/sequoia.h | 27 +++++++--------------------
 1 file changed, 7 insertions(+), 20 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index d3fcc03..639765d 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -69,14 +69,9 @@
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer
  *----------------------------------------------------------------------*/
-#if 0
 /* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache	*/
-#define CFG_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
-#define CFG_INIT_RAM_ADDR	0x70000000	/* DCache		*/
-#else
 #define CFG_INIT_RAM_OCM	1		/* OCM as init ram	*/
 #define CFG_INIT_RAM_ADDR	CFG_OCM_BASE	/* OCM			*/
-#endif
 
 #define CFG_INIT_RAM_END	(4 << 10)
 #define CFG_GBL_DATA_SIZE	256		/* num bytes initial data */
@@ -98,18 +93,11 @@
 /*-----------------------------------------------------------------------
  * Environment
  *----------------------------------------------------------------------*/
-/*
- * Define here the location of the environment variables (FLASH or EEPROM).
- * Note: DENX encourages to use redundant environment in FLASH.
- */
-#if 1 /* test-only */
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
 #define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 #else
 #define CFG_ENV_IS_IN_NAND	1	/* use NAND for environment vars	*/
 #endif
-#if 0
-#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars	*/
-#endif
 
 /*-----------------------------------------------------------------------
  * FLASH related
@@ -189,8 +177,12 @@
 #undef CFG_NAND_4_ADDR_CYCLE			/* No fourth addr used (<=32MB)	*/
 
 #ifdef CFG_ENV_IS_IN_NAND
-#define CFG_ENV_SIZE		0x4000
-#define CFG_ENV_OFFSET		(CFG_NAND_U_BOOT_OFFS + CFG_NAND_U_BOOT_SIZE)
+/*
+ * For NAND booting the environment is embedded in the U-Boot image. Please take
+ * look at the file board/amcc/sequoia/u-boot-nand.lds for details.
+ */
+#define CFG_ENV_SIZE		CFG_NAND_BLOCK_SIZE
+#define CFG_ENV_OFFSET		(CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE)
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET + CFG_ENV_SIZE)
 #endif
 
@@ -214,11 +206,6 @@
 #define CFG_EEPROM_PAGE_WRITE_BITS 3
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
 
-#ifdef CFG_ENV_IS_IN_EEPROM
-#define CFG_ENV_SIZE		0x200		/* Size of Environment vars	*/
-#define CFG_ENV_OFFSET		0x0
-#endif /* CFG_ENV_IS_IN_EEPROM */
-
 /* I2C SYSMON (LM75, AD7414 is almost compatible)			*/
 #define CONFIG_DTT_LM75		1		/* ON Semi's LM75	*/
 #define CONFIG_DTT_AD7414	1		/* use AD7414		*/
-- 
cgit v1.1


From 854bc8da75709f13dab4cfa6e9094c0cb49b5c5a Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Wed, 13 Sep 2006 13:51:58 +0200
Subject: Add support for AMCC Rainier PPX440GRx eval board Patch by Stefan
 Roese, 13 Sep 2006

---
 include/configs/sequoia.h | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

(limited to 'include/configs')

diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 639765d..f67fd91 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -31,8 +31,13 @@
 /*-----------------------------------------------------------------------
  * High Level Configuration Options
  *----------------------------------------------------------------------*/
+/* This config file is used for Sequoia (440EPx) and Rainier (440GRx) */
+#ifndef CONFIG_RAINIER
 #define CONFIG_SEQUOIA		1		/* Board is Sequoia	*/
 #define CONFIG_440EPX		1		/* Specific PPC440EPx	*/
+#else
+#define CONFIG_440GRX		1		/* Specific PPC440GRx	*/
+#endif
 #define CONFIG_4xx		1		/* ... PPC4xx family	*/
 #define CONFIG_SYS_CLK_FREQ	33333333	/* external freq to pll	*/
 
@@ -272,12 +277,18 @@
 #define CONFIG_PHY1_ADDR	1
 
 /* USB */
+#ifdef CONFIG_440EPX
 #define CONFIG_USB_OHCI
 #define CONFIG_USB_STORAGE
 
 /* Comment this out to enable USB 1.1 device */
 #define USB_2_0_DEVICE
 
+#define CMD_USB			CFG_CMD_USB
+#else
+#define CMD_USB			0	/* no USB on 440GRx		*/
+#endif /* CONFIG_440EPX */
+
 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -301,7 +312,7 @@
 			       CFG_CMD_PING	|	\
 			       CFG_CMD_REGINFO	|	\
 			       CFG_CMD_SDRAM	|	\
-			       CFG_CMD_USB    )
+			       CMD_USB)
 
 #define CONFIG_SUPPORT_VFAT
 
-- 
cgit v1.1


From 7299712c869ce1f409a854ca0d2b268783038ab2 Mon Sep 17 00:00:00 2001
From: Marian Balakowicz <m8@semihalf.com>
Date: Tue, 3 Oct 2006 20:28:38 +0200
Subject: Update for CAM5200 board:   - Map in a additional chip selects CS4
 and CS5.   - Modify the port configration, configure six UARTs and no PCI,   
  ATA and USB.   - Add custom flash driver to handle specific byte swapping

---
 include/configs/TQM5200.h | 101 +++++++++++++++++++++++++++++++---------------
 1 file changed, 68 insertions(+), 33 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index e0de5c1..897d1b2 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -285,7 +285,7 @@
  */
 #define CFG_IPBSPEED_133		/* define for 133MHz speed */
 
-#if defined(CFG_IPBSPEED_133)
+#if defined(CFG_IPBSPEED_133) && !defined(CONFIG_CAM5200)
 /*
  * PCI Bus clocking configuration
  *
@@ -349,13 +349,29 @@
  */
 #define CFG_FLASH_BASE		0xFC000000
 
+#ifndef CONFIG_CAM5200
 /* use CFI flash driver */
 #define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
 #define CFG_FLASH_BANKS_LIST	{ CFG_BOOTCS_START }
+#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks
+					   (= chip selects) */
+#define CFG_MAX_FLASH_SECT	512	/* max num of sects on one chip */
+#else /* CONFIG_CAM5200 */
+#define CFG_MAX_FLASH_BANKS	2	/* max num of flash banks
+					   (= chip selects) */
+#define CFG_FLASH_WORD_SIZE	unsigned int /* main flash device with */
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_ADDR0		0x555
+#define CFG_FLASH_ADDR1		0x2AA
+#define CFG_FLASH_2ND_16BIT_DEV	1	/* NIOS flash is a 16bit device */
+#define CFG_MAX_FLASH_SECT	128
+#endif /* ifndef CONFIG_CAM5200 */
+
 #define CFG_FLASH_EMPTY_INFO
 #define CFG_FLASH_SIZE		0x04000000 /* 64 MByte */
-#define CFG_MAX_FLASH_SECT	512	/* max num of sects on one chip */
 #define CFG_FLASH_USE_BUFFER_WRITE	1
 
 #if defined (CONFIG_CAM5200)
@@ -366,9 +382,6 @@
 # define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00060000)
 #endif
 
-#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks
-					   (= chip selects) */
-
 /* Dynamic MTD partition support */
 #define CONFIG_JFFS2_CMDLINE
 #define MTDIDS_DEFAULT		"nor0=TQM5200-0"
@@ -401,10 +414,8 @@
 #elif defined (CONFIG_CAM5200)
 #   define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:768k(firmware),"	\
 						"1792k(kernel),"	\
-						"3584k(small-fs),"	\
-						"2m(initrd),"		\
-						"8m(misc),"		\
-						"16m(big-fs)"
+						"5632k(rootfs),"	\
+						"24m(home)"
 #elif defined (CONFIG_FO300)
 #   define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:640k(firmware),"	\
 						"1408k(kernel),"	\
@@ -479,31 +490,43 @@
 /*
  * GPIO configuration
  *
- * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1):
- *	Bit 0 (mask: 0x80000000): 1
+ * use CS1: Bit 0 (mask: 0x80000000):
+ *	   1 -> Pin gpio_wkup_6 as second SDRAM chip select (mem_cs1).
  * use ALT CAN position: Bits 2-3 (mask: 0x30000000):
- *	00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
- *	01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
- *	      Use for REV200 STK52XX boards and FO300 boards. Do not use
- *	      with REV100 modules (because, there I2C1 is used as I2C bus)
- * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
- * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030)
- *	000 -> All PSC2 pins are GIOPs
- *	001 -> CAN1/2 on PSC2 pins
- *	       Use for REV100 STK52xx boards
- *	01x -> Use AC97
- * use PSC3: Bits 20-23 (mask: 0x00000f00)
- *	1100 -> UART/SPI (on FO300 board)
- * use PSC6:
- *   on STK52xx and FO300:
- *	use as UART. Pins PSC6_0 to PSC6_3 are used.
- *	Bits 9:11 (mask: 0x00700000):
- *	   101 -> PSC6 : Extended POST test is not available
- *   on MINI-FAP and TQM5200_IB:
- *	use PSC6_0 to PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000):
- *	   000 -> PSC6 could not be used as UART, CODEC or IrDA
- *   GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST
- *   tests.
+ *	  00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
+ *		SPI on PSC3 according to PSC3 setting. Use for CAM5200.
+ *	  01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
+ *		Use for REV200 STK52XX boards and FO300 boards. Do not use
+ *		with REV100 modules (because, there I2C1 is used as I2C bus).
+ * use ATA: Bits 6-7 (mask 0x03000000):
+ *	  00 -> No ATA chip selects, csb_4/5 used as normal chip selects.
+ *		Use for CAM5200 board.
+ *	  01 -> ATA cs0/1 on csb_4/5. Use for the remaining boards.
+ * use PSC6: Bits 9-11 (mask 0x00700000):
+ *	 000 -> use PSC6_0 to PSC6_3 as GPIO, PSC6 could not be used as
+ *		UART, CODEC or IrDA.
+ *		GPIO on PSC6_3 is used in post_hotkeys_pressed() to
+ *		enable extended POST tests.
+ *		Use for MINI-FAP and TQM5200_IB boards.
+ *	 101 -> use PSC6 as UART. Pins PSC6_0 to PSC6_3 are used.
+ *		Extended POST test is not available.
+ *		Use for STK52xx, FO300 and CAM5200 boards.
+ * use PCI_DIS: Bit 16 (mask 0x00008000):
+ *	   1 -> disable PCI controller (on CAM5200 board).
+ * use USB: Bits 18-19 (mask 0x00003000):
+ *	  10 -> two UARTs (on FO300 and CAM5200).
+ * use PSC3: Bits 20-23 (mask: 0x00000f00):
+ *	0000 -> All PSC3 pins are GPIOs.
+ *	1100 -> UART/SPI (on FO300 board).
+ *	0100 -> UART (on CAM5200 board).
+ * use PSC2: Bits 25:27 (mask: 0x00000030):
+ *	 000 -> All PSC2 pins are GPIOs.
+ *	 100 -> UART (on CAM5200 board).
+ *	 001 -> CAN1/2 on PSC2 pins.
+ *	        Use for REV100 STK52xx boards
+ *	 01x -> Use AC97 (on FO300 board).
+ * use PSC1: Bits 29-31 (mask: 0x00000007):
+ *	 100 -> UART (on all boards).
  */
 #if defined (CONFIG_MINIFAP)
 # define CFG_GPS_PORT_CONFIG	0x91000004
@@ -519,6 +542,8 @@
 # endif
 #elif defined (CONFIG_FO300)
 # define CFG_GPS_PORT_CONFIG	0x91502c24
+#elif defined (CONFIG_CAM5200)
+# define CFG_GPS_PORT_CONFIG	0x8050A444
 #else  /* TMQ5200 Inbetriebnahme-Board */
 # define CFG_GPS_PORT_CONFIG	0x81000004
 #endif
@@ -613,6 +638,16 @@
 #define CFG_CS_BURST		0x00000000
 #define CFG_CS_DEADCYCLE	0x33333311	/* 1 dead cycle for flash and SM501 */
 
+#if defined(CONFIG_CAM5200)
+#define CFG_CS4_START		0xB0000000
+#define CFG_CS4_SIZE		0x00010000
+#define CFG_CS4_CFG		0x01019C10
+
+#define CFG_CS5_START		0xD0000000
+#define CFG_CS5_SIZE		0x01208000
+#define CFG_CS5_CFG		0x1414BF10
+#endif
+
 #define CFG_RESET_ADDRESS	0xff000000
 
 /*-----------------------------------------------------------------------
-- 
cgit v1.1


From 7ce343e49993341f2cdd559e0c44ad7507f71eb7 Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@atlas.denx.de>
Date: Mon, 9 Oct 2006 00:48:57 +0200
Subject: Add missing files for EP82xxM boards Patch by Aaron Sells, 20 Jun
 2006

---
 include/configs/ep82xxm.h | 395 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 395 insertions(+)
 create mode 100644 include/configs/ep82xxm.h

(limited to 'include/configs')

diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h
new file mode 100644
index 0000000..5d7bed6
--- /dev/null
+++ b/include/configs/ep82xxm.h
@@ -0,0 +1,395 @@
+/*
+ * Copyright (C) 2006 Embedded Planet, LLC.
+ *
+ * U-Boot configuration for Embedded Planet EP82xxM boards.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_MPC8260
+#define CPU_ID_STR		"MPC8270"
+
+#define CONFIG_EP82XXM	/* Embedded Planet EP82xxM H 1.0 board /*
+			/* 256MB SDRAM / 64MB FLASH */
+
+#undef DEBUG
+
+#define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f */
+
+/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
+#define CONFIG_ENV_OVERWRITE
+
+/*
+ * Select serial console configuration
+ *
+ * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
+ * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
+ * for SCC).
+ */
+#define	CONFIG_CONS_ON_SMC		/* Console is on SMC         */
+#undef  CONFIG_CONS_ON_SCC		/* It's not on SCC           */
+#undef	CONFIG_CONS_NONE		/* It's not on external UART */
+#define CONFIG_CONS_INDEX	1	/* SMC1 is used for console  */
+
+#define CFG_BCSR		0xFA000000
+
+/*
+ * Select ethernet configuration
+ *
+ * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
+ * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
+ * SCC, 1-3 for FCC)
+ *
+ * If CONFIG_ETHER_NONE is defined, then either the ethernet routines
+ * must be defined elsewhere (as for the console), or CFG_CMD_NET must
+ * be removed from CONFIG_COMMANDS to remove support for networking.
+ */
+#undef	CONFIG_ETHER_ON_SCC		/* Ethernet is not on SCC */
+#define CONFIG_ETHER_ON_FCC		/* Ethernet is on FCC     */
+#undef	CONFIG_ETHER_NONE		/* No external Ethernet   */
+
+#define CONFIG_NET_MULTI
+
+#define CONFIG_ETHER_ON_FCC2
+#define CONFIG_ETHER_ON_FCC3
+
+#define CFG_CMXFCR_MASK3	(CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
+#define CFG_CMXFCR_VALUE3	(CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK16)
+#define CFG_CMXFCR_MASK2	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+#define CFG_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+
+#define CFG_CPMFCR_RAMTYPE	0
+#define CFG_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)
+
+#define CONFIG_MII			/* MII PHY management        */
+#define CONFIG_BITBANGMII		/* Bit-banged MDIO interface */
+
+/*
+ * GPIO pins used for bit-banged MII communications
+ */
+#define MDIO_PORT		0	/* Not used - implemented in BCSR */
+#define MDIO_ACTIVE		(*(vu_char *)(CFG_BCSR + 8) &= 0xFB)
+#define MDIO_TRISTATE		(*(vu_char *)(CFG_BCSR + 8) |= 0x04)
+#define MDIO_READ		(*(vu_char *)(CFG_BCSR + 8) & 1)
+
+#define MDIO(bit)		if(bit) *(vu_char *)(CFG_BCSR + 8) |= 0x01; \
+				else	*(vu_char *)(CFG_BCSR + 8) &= 0xFE
+
+#define MDC(bit)		if(bit) *(vu_char *)(CFG_BCSR + 8) |= 0x02; \
+				else	*(vu_char *)(CFG_BCSR + 8) &= 0xFD
+
+#define MIIDELAY		udelay(1)
+
+
+#ifndef CONFIG_8260_CLKIN
+#define CONFIG_8260_CLKIN	66000000 /* in Hz */
+#endif
+
+#define CONFIG_BAUDRATE		115200
+
+#define CFG_VXWORKS_MAC_PTR 0x4300 /* Pass Ethernet MAC to VxWorks */
+
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL   \
+				| CFG_CMD_DHCP    \
+				| CFG_CMD_ECHO    \
+				| CFG_CMD_I2C     \
+				| CFG_CMD_IMMAP   \
+				| CFG_CMD_MII     \
+				| CFG_CMD_PING    \
+				| CFG_CMD_DATE    \
+				| CFG_CMD_DTT	  \
+				| CFG_CMD_EEPROM  \
+				| CFG_CMD_PCI	  \
+				| CFG_CMD_DIAG	  \
+				)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_ETHADDR		00:10:EC:00:88:65
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR		00:10:EC:80:88:65
+#define CONFIG_IPADDR		10.0.0.245
+#define CONFIG_HOSTNAME		EP82xxM
+#define CONFIG_SERVERIP		10.0.0.26
+#define CONFIG_GATEWAYIP	10.0.0.1
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
+#define CFG_ENV_IN_OWN_SECT	1
+#define CFG_AUTO_COMPLETE
+#define	CONFIG_EXTRA_ENV_SETTINGS	"ethprime=FCC3 ETHERNET"
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
+#define CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
+#undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
+#define CONFIG_KGDB_INDEX	1	/* which serial channel for kgdb */
+#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port at */
+#endif
+
+#define CONFIG_BZIP2	/* include support for bzip2 compressed images */
+#undef	CONFIG_WATCHDOG			/* disable platform specific watchdog */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2	"> "
+#define CFG_LONGHELP			/* undef to save memory	    */
+#define CFG_PROMPT		"ep82xxm=> "	/* Monitor Command Prompt   */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#else
+#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size  */
+#define CFG_MAXARGS		16		/* max number of command args */
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size  */
+
+#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
+#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+/*
+ * Define here the location of the environment variables (FLASH or EEPROM).
+ * Note: DENX encourages to use redundant environment in FLASH.
+ */
+#if 1
+#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#else
+#define CFG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars	*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_BASE		0xFC000000
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks	*/
+#define CFG_MAX_FLASH_SECT	512	/* max num of sects on one chip */
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector in flinfo */
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x20000
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+/* EEPROM Configuration */
+#define CFG_EEPROM_SIZE	0x1000
+#define CFG_I2C_EEPROM_ADDR	0x54
+#define CFG_I2C_EEPROM_ADDR_LEN	1
+#define CFG_EEPROM_PAGE_WRITE_BITS	3
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
+
+#ifdef CFG_ENV_IS_IN_EEPROM
+#define CFG_ENV_SIZE		0x200	    /* Size of Environment vars */
+#define CFG_ENV_OFFSET		0x0
+#endif /* CFG_ENV_IS_IN_EEPROM */
+
+/* RTC Configuration */
+#define CONFIG_RTC_M41T11	1 	/* uses a M41T81 */
+#define CFG_I2C_RTC_ADDR	0x68
+#define CONFIG_M41T11_BASE_YEAR	1900
+
+/* I2C SYSMON (LM75) */
+#define CONFIG_DTT_LM75		1
+#define CONFIG_DTT_SENSORS	{0}
+#define CFG_DTT_MAX_TEMP	70
+#define CFG_DTT_LOW_TEMP	-30
+#define	CFG_DTT_HYSTERESIS	3
+
+/*-----------------------------------------------------------------------
+ * NVRAM Configuration
+ *-----------------------------------------------------------------------
+ */
+#define CFG_NVRAM_BASE_ADDR	0xFA080000
+#define CFG_NVRAM_SIZE		(128*1024)-16
+
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI			/* include pci support	        */
+#define CONFIG_PCI_PNP			/* do pci plug-and-play   */
+#define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
+#define CONFIG_PCI_BOOTDELAY	0
+
+/* PCI Memory map (if different from default map */
+#define CFG_PCI_SLV_MEM_LOCAL	CFG_SDRAM_BASE		/* Local base */
+#define CFG_PCI_SLV_MEM_BUS		0x00000000	/* PCI base */
+#define CFG_PICMR0_MASK_ATTRIB	(PICMR_MASK_512MB | PICMR_ENABLE | \
+				 PICMR_PREFETCH_EN)
+
+/*
+ * These are the windows that allow the CPU to access PCI address space.
+ * All three PCI master windows, which allow the CPU to access PCI
+ * prefetch, non prefetch, and IO space (see below), must all fit within
+ * these windows.
+ */
+
+/*
+ * Master window that allows the CPU to access PCI Memory (prefetch).
+ * This window will be setup with the second set of Outbound ATU registers
+ * in the bridge.
+ */
+
+#define CFG_PCI_MSTR_MEM_LOCAL	0x80000000          /* Local base */
+#define CFG_PCI_MSTR_MEM_BUS	0x80000000          /* PCI base   */
+#define	CFG_CPU_PCI_MEM_START	PCI_MSTR_MEM_LOCAL
+#define CFG_PCI_MSTR_MEM_SIZE	0x20000000          /* 512MB */
+#define CFG_POCMR0_MASK_ATTRIB	(POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN)
+
+/*
+ * Master window that allows the CPU to access PCI Memory (non-prefetch).
+ * This window will be setup with the second set of Outbound ATU registers
+ * in the bridge.
+ */
+
+#define CFG_PCI_MSTR_MEMIO_LOCAL    0xA0000000          /* Local base */
+#define CFG_PCI_MSTR_MEMIO_BUS      0xA0000000          /* PCI base   */
+#define CFG_CPU_PCI_MEMIO_START     PCI_MSTR_MEMIO_LOCAL
+#define CFG_PCI_MSTR_MEMIO_SIZE     0x20000000          /* 512MB */
+#define CFG_POCMR1_MASK_ATTRIB      (POCMR_MASK_512MB | POCMR_ENABLE)
+
+/*
+ * Master window that allows the CPU to access PCI IO space.
+ * This window will be setup with the first set of Outbound ATU registers
+ * in the bridge.
+ */
+
+#define CFG_PCI_MSTR_IO_LOCAL       0xF6000000          /* Local base */
+#define CFG_PCI_MSTR_IO_BUS         0x00000000          /* PCI base   */
+#define CFG_CPU_PCI_IO_START        PCI_MSTR_IO_LOCAL
+#define CFG_PCI_MSTR_IO_SIZE        0x02000000          /* 64MB */
+#define CFG_POCMR2_MASK_ATTRIB      (POCMR_MASK_32MB | POCMR_ENABLE | POCMR_PCI_IO)
+
+
+/* PCIBR0 - for PCI IO*/
+#define CFG_PCI_MSTR0_LOCAL		CFG_PCI_MSTR_IO_LOCAL		/* Local base */
+#define CFG_PCIMSK0_MASK		~(CFG_PCI_MSTR_IO_SIZE - 1U)	/* Size of window */
+/* PCIBR1 - prefetch and non-prefetch regions joined together */
+#define CFG_PCI_MSTR1_LOCAL		CFG_PCI_MSTR_MEM_LOCAL
+#define CFG_PCIMSK1_MASK		~(CFG_PCI_MSTR_MEM_SIZE + CFG_PCI_MSTR_MEMIO_SIZE - 1U)
+
+
+#define	CFG_DIRECT_FLASH_TFTP
+
+#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+#define CFG_JFFS2_FIRST_BANK	0
+#define CFG_JFFS2_NUM_BANKS	CFG_MAX_FLASH_BANKS
+#define CFG_JFFS2_FIRST_SECTOR  0
+#define CFG_JFFS2_LAST_SECTOR   62
+#define CFG_JFFS2_SORT_FRAGMENTS
+#define CFG_JFFS_CUSTOM_PART
+#endif /* CFG_CMD_JFFS2 */
+
+#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
+#define CFG_I2C_SPEED		100000	/* I2C speed			*/
+#define CFG_I2C_SLAVE		0x7F	/* I2C slave address		*/
+#endif /* CFG_CMD_I2C */
+
+#define CFG_MONITOR_BASE	TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN		(512 << 10)	/* Reserve 256KB for Monitor */
+
+#define CFG_DEFAULT_IMMR	0x00010000
+#define CFG_IMMR		0xF0000000
+
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define CFG_INIT_RAM_END	0x2000	/* End of used area in DPRAM	*/
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+
+/* Hard reset configuration word */
+#define CFG_HRCW_MASTER		0 /*0x1C800641*/  /* Not used - provided by CPLD */
+/* No slaves */
+#define CFG_HRCW_SLAVE1 	0
+#define CFG_HRCW_SLAVE2 	0
+#define CFG_HRCW_SLAVE3 	0
+#define CFG_HRCW_SLAVE4 	0
+#define CFG_HRCW_SLAVE5 	0
+#define CFG_HRCW_SLAVE6 	0
+#define CFG_HRCW_SLAVE7 	0
+
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM		0x02	/* Software reboot                  */
+
+#define CFG_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+#define CFG_HID0_INIT		0
+#define CFG_HID0_FINAL		0
+
+#define CFG_HID2		0
+
+#define CFG_SIUMCR		0x02610000
+#define CFG_SYPCR		0xFFFF0689
+#define CFG_BCR			0x8080E000
+#define CFG_SCCR		0x00000001
+
+#define CFG_RMR			0
+#define CFG_TMCNTSC		0x000000C3
+#define CFG_PISCR		0x00000083
+#define CFG_RCCR		0
+
+#define CFG_MPTPR		0x0A00
+#define CFG_PSDMR		0xC432246E
+#define CFG_PSRT		0x32
+
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_SDRAM_BR		(CFG_SDRAM_BASE | 0x00000041)
+#define CFG_SDRAM_OR		0xF0002900
+
+#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | 0x00001801)
+#define CFG_OR0_PRELIM		0xFC000882
+#define CFG_BR4_PRELIM		(CFG_BCSR | 0x00001001)
+#define CFG_OR4_PRELIM		0xFFF00050
+
+#define CFG_RESET_ADDRESS	0xFFF00100
+
+#endif /* __CONFIG_H */
-- 
cgit v1.1