From e8d18541c6ceab821f75faab031740b33fdbfa4b Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 18 Jul 2008 16:52:23 +0200 Subject: Update Freescale 85xx boards to sys_eeprom.c The new sys_eeprom.c supports both the old CCID EEPROM format and the new NXID format, and so it obsoletes board/freescale/common/cds_eeprom.c. Freescale 86xx boards already use sys_eeprom.c, so this patch migrates the remaining Freescale 85xx boards to use it as well. cds_eeprom.c is deleted. Signed-off-by: Timur Tabi --- include/configs/MPC8541CDS.h | 9 +++++++-- include/configs/MPC8548CDS.h | 9 +++++++-- include/configs/MPC8555CDS.h | 10 ++++++++-- 3 files changed, 22 insertions(+), 6 deletions(-) (limited to 'include/configs') diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 29dff32..bfd86f5 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -44,7 +44,6 @@ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ #define CONFIG_FSL_VIA -#define CONFIG_FSL_CDS_EEPROM /* * When initializing flash, if we cannot find the manufacturer ID, @@ -328,11 +327,17 @@ extern unsigned long get_clock_freq(void); #define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CFG_I2C_EEPROM_ADDR 0x57 #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ #define CFG_I2C_OFFSET 0x3000 +/* EEPROM */ +#define CONFIG_ID_EEPROM +#define CFG_I2C_EEPROM_CCID +#define CFG_ID_EEPROM +#define CFG_I2C_EEPROM_ADDR 0x57 +#define CFG_I2C_EEPROM_ADDR_LEN 2 + /* * General PCI * Memory space is mapped 1-1, but I/O space must start from 0. diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index ec0b4ff..06965ed 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -50,7 +50,6 @@ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ #define CONFIG_FSL_VIA -#define CONFIG_FSL_CDS_EEPROM /* * When initializing flash, if we cannot find the manufacturer ID, @@ -352,11 +351,17 @@ extern unsigned long get_clock_freq(void); #define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CFG_I2C_EEPROM_ADDR 0x57 #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ #define CFG_I2C_OFFSET 0x3000 +/* EEPROM */ +#define CONFIG_ID_EEPROM +#define CFG_I2C_EEPROM_CCID +#define CFG_ID_EEPROM +#define CFG_I2C_EEPROM_ADDR 0x57 +#define CFG_I2C_EEPROM_ADDR_LEN 2 + /* * General PCI * Memory space is mapped 1-1, but I/O space must start from 0. diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index c07a725..a92c0fe 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -43,7 +43,7 @@ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ #define CONFIG_FSL_VIA -#define CONFIG_FSL_CDS_EEPROM + /* * When initializing flash, if we cannot find the manufacturer ID, @@ -325,11 +325,17 @@ extern unsigned long get_clock_freq(void); #define CONFIG_HARD_I2C /* I2C with hardware support*/ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CFG_I2C_EEPROM_ADDR 0x57 #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ #define CFG_I2C_OFFSET 0x3000 +/* EEPROM */ +#define CONFIG_ID_EEPROM +#define CFG_I2C_EEPROM_CCID +#define CFG_ID_EEPROM +#define CFG_I2C_EEPROM_ADDR 0x57 +#define CFG_I2C_EEPROM_ADDR_LEN 2 + /* * General PCI * Addresses are mapped 1-1. -- cgit v1.1