From 1f1369c34b629be94702684d41d3fddf0f6193e7 Mon Sep 17 00:00:00 2001 From: Bartlomiej Sieka Date: Tue, 8 May 2007 09:21:57 +0200 Subject: [Motion-PRO] Enable Flat Device Tree support and modify default environment to allow booting of FDT-expecting kernels. --- include/configs/motionpro.h | 49 +++++++++++++++++++++++++++------------------ 1 file changed, 30 insertions(+), 19 deletions(-) (limited to 'include/configs') diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index 5328e8d..b1edde8 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -26,7 +26,6 @@ #ifndef __CONFIG_H #define __CONFIG_H - /* * High Level Configuration Options */ @@ -94,42 +93,44 @@ * Default environment settings */ #define CONFIG_EXTRA_ENV_SETTINGS \ - "sdram_test=0\0" \ "netdev=eth0\0" \ "hostname=motionpro\0" \ "netmask=255.255.0.0\0" \ "ipaddr=192.168.160.22\0" \ "serverip=192.168.1.1\0" \ "gatewayip=192.168.1.1\0" \ - "kernel_addr=200000\0" \ + "console=ttyPSC0,115200\0" \ "u-boot_addr=100000\0" \ - "kernel_sector=20\0" \ - "kernel_size=1000\0" \ - "console=ttyS0,115200\0" \ + "kernel_addr=200000\0" \ + "fdt_addr=400000\0" \ + "ramdisk_addr=500000\0" \ "rootpath=/opt/eldk-4.1/ppc_6xx\0" \ - "bootfile=/tftpboot/motionpro/uImage\0" \ "u-boot=/tftpboot/motionpro/u-boot.bin\0" \ + "bootfile=/tftpboot/motionpro/uImage\0" \ + "fdt_file=/tftpboot/motionpro/motionpro.dtb\0" \ + "ramdisk_file=/tftpboot/motionpro/uRamdisk\0" \ "load=tftp $(u-boot_addr) $(u-boot)\0" \ "update=prot off fff00000 fff3ffff; era fff00000 fff3ffff; " \ "cp.b $(u-boot_addr) fff00000 $(filesize);" \ "prot on fff00000 fff3ffff\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs $(bootargs) console=$(console) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):" \ - "$(netmask):$(hostname):$(netdev):off panic=1\0" \ - "flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \ - "flash_self=run ramargs addip;bootm $(kernel_addr) " \ - "$(ramdisk_addr)\0" \ - "net_nfs=tftp $(kernel_addr) $(bootfile); run nfsargs addip; " \ - "bootm $(kernel_addr)\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=$(serverip):$(rootpath)\0" \ - "fstype=ext3\0" \ - "fatargs=setenv bootargs init=/linuxrc rw\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):" \ + "$(netmask):$(hostname):$(netdev):off panic=1 " \ + "console=$(console)\0" \ + "net_nfs=tftp $(kernel_addr) $(bootfile); " \ + "tftp $(fdt_addr) $(fdt_file); run nfsargs addip; " \ + "bootm $(kernel_addr) - $(fdt_addr)\0" \ + "net_self=tftp $(kernel_addr) $(bootfile); " \ + "tftp $(fdt_addr) $(fdt_file); " \ + "tftp $(ramdisk_addr) $(ramdisk_file); " \ + "run ramargs addip; " \ + "bootm $(kernel_addr) $(ramdisk_addr) $(fdt_addr)\0" \ "" #define CONFIG_BOOTCOMMAND "run net_nfs" - /* * do board-specific init */ @@ -146,7 +147,6 @@ */ #define CFG_MPC5XXX_CLKIN 25000000 - /* * Memory map */ @@ -302,4 +302,15 @@ /* Not needed for MPC 5xxx U-Boot, but used by tools/updater */ #define CFG_RESET_ADDRESS 0xfff00100 +/* pass open firmware flat tree */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 + +/* maximum size of the flat tree (8K) */ +#define OF_FLAT_TREE_MAX_SIZE 8192 +#define OF_CPU "PowerPC,5200@0" +#define OF_SOC "soc5200@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PAT "/soc5200@f0000000/serial@2000" + #endif /* __CONFIG_H */ -- cgit v1.1 From 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839 Mon Sep 17 00:00:00 2001 From: Bartlomiej Sieka Date: Tue, 8 May 2007 09:39:12 +0200 Subject: [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This eliminates networking problems in Linux (timeouts). --- include/configs/motionpro.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/configs') diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index b1edde8..74ba800 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -147,6 +147,13 @@ */ #define CFG_MPC5XXX_CLKIN 25000000 + +/* + * Set IPB speed to 100MHz (yes, the #define is misnamed) + */ +#define CFG_IPBSPEED_133 + + /* * Memory map */ -- cgit v1.1 From fa5c2ba123b1bf88455bfc21db5e786ca045029d Mon Sep 17 00:00:00 2001 From: Bartlomiej Sieka Date: Tue, 8 May 2007 10:23:56 +0200 Subject: [Motion-PRO] Add ATA support. Add CF-booting commands to the default environment. --- include/configs/motionpro.h | 25 +++++++++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-) (limited to 'include/configs') diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index 74ba800..989a534 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -30,7 +30,6 @@ * High Level Configuration Options */ - /* CPU and board */ #define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ #define CONFIG_MPC5200 1 /* More exactly a MPC5200 */ @@ -49,7 +48,9 @@ CFG_CMD_MII | \ CFG_CMD_BEDBUG | \ CFG_CMD_NET | \ - CFG_CMD_PING) + CFG_CMD_PING | \ + CFG_CMD_IDE | \ + CFG_CMD_FAT) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include @@ -104,11 +105,13 @@ "kernel_addr=200000\0" \ "fdt_addr=400000\0" \ "ramdisk_addr=500000\0" \ + "multi_image_addr=800000\0" \ "rootpath=/opt/eldk-4.1/ppc_6xx\0" \ "u-boot=/tftpboot/motionpro/u-boot.bin\0" \ "bootfile=/tftpboot/motionpro/uImage\0" \ "fdt_file=/tftpboot/motionpro/motionpro.dtb\0" \ "ramdisk_file=/tftpboot/motionpro/uRamdisk\0" \ + "multi_image_file=kernel+initrd+dtb.img\0" \ "load=tftp $(u-boot_addr) $(u-boot)\0" \ "update=prot off fff00000 fff3ffff; era fff00000 fff3ffff; " \ "cp.b $(u-boot_addr) fff00000 $(filesize);" \ @@ -116,6 +119,7 @@ "ramargs=setenv bootargs root=/dev/ram rw\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=$(serverip):$(rootpath)\0" \ + "fat_args=setenv bootargs rw\0" \ "addip=setenv bootargs $(bootargs) " \ "ip=$(ipaddr):$(serverip):$(gatewayip):" \ "$(netmask):$(hostname):$(netdev):off panic=1 " \ @@ -128,6 +132,9 @@ "tftp $(ramdisk_addr) $(ramdisk_file); " \ "run ramargs addip; " \ "bootm $(kernel_addr) $(ramdisk_addr) $(fdt_addr)\0" \ + "fat_multi=run fat_args addip; fatload ide 0:1 " \ + "${multi_image_addr} ${multi_image_file}; " \ + "bootm ${multi_image_addr}\0" \ "" #define CONFIG_BOOTCOMMAND "run net_nfs" @@ -252,6 +259,20 @@ /* + * IDE/ATA configuration + */ +#define CFG_ATA_BASE_ADDR MPC5XXX_ATA +#define CFG_IDE_MAXBUS 1 +#define CFG_IDE_MAXDEVICE 1 +#define CONFIG_IDE_PREINIT + +#define CFG_ATA_DATA_OFFSET 0x0060 +#define CFG_ATA_REG_OFFSET CFG_ATA_DATA_OFFSET +#define CFG_ATA_STRIDE 4 +#define CONFIG_DOS_PARTITION + + +/* * Environment settings */ #define CFG_ENV_IS_IN_FLASH 1 -- cgit v1.1 From de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3 Mon Sep 17 00:00:00 2001 From: Piotr Kruszynski Date: Tue, 8 May 2007 13:05:44 +0200 Subject: [Motion-PRO] Add support for I2C, EEPROM and RTC. --- include/configs/motionpro.h | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) (limited to 'include/configs') diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index 989a534..f1f7e2b 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -50,7 +50,10 @@ CFG_CMD_NET | \ CFG_CMD_PING | \ CFG_CMD_IDE | \ - CFG_CMD_FAT) + CFG_CMD_FAT | \ + CFG_CMD_I2C | \ + CFG_CMD_DATE | \ + CFG_CMD_EEPROM) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include @@ -273,6 +276,31 @@ /* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CFG_I2C_MODULE 2 /* select I2C module #2 */ +#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + + +/* + * EEPROM configuration + */ +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70 +#define CFG_I2C_MULTI_EEPROMS 1 /* 2 EEPROMs (addr:50,52) */ + + +/* + * RTC configuration + */ +#define CONFIG_RTC_DS1337 1 +#define CFG_I2C_RTC_ADDR 0x68 + + +/* * Environment settings */ #define CFG_ENV_IS_IN_FLASH 1 -- cgit v1.1 From 7d98ba770a7eaefa29ce927f31a0956df85bf650 Mon Sep 17 00:00:00 2001 From: Piotr Kruszynski Date: Thu, 10 May 2007 16:55:52 +0200 Subject: [Motion-PRO] Add MTD and JFFS2 support, also add default partition definition. --- include/configs/motionpro.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/configs') diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index f1f7e2b..e6e0eb1 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -51,6 +51,7 @@ CFG_CMD_PING | \ CFG_CMD_IDE | \ CFG_CMD_FAT | \ + CFG_CMD_JFFS2 | \ CFG_CMD_I2C | \ CFG_CMD_DATE | \ CFG_CMD_EEPROM) @@ -260,6 +261,14 @@ #define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */ #define CONFIG_FLASH_16BIT /* Flash is 16-bit */ +/* + * MTD configuration + */ +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=motionpro-0" +#define MTDPARTS_DEFAULT "mtdparts=motionpro-0:" \ + "13m(fs),2m(kernel),256k(uboot)," \ + "64k(env),64k(dtb),-(user_data)" /* * IDE/ATA configuration -- cgit v1.1