From e4c09508545d1c45617ba45391c03c03cbc360b9 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Mon, 30 Jun 2008 14:13:28 -0500 Subject: NAND boot: MPC8313ERDB support Note that with older board revisions, NAND boot may only work after a power-on reset, and not after a warm reset. I don't have a newer board to test on; if you have a board with a 33MHz crystal, please let me know if it works after a warm reset. Signed-off-by: Scott Wood --- include/configs/MPC8313ERDB.h | 82 ++++++++++++++++++++++++++++++++++--------- 1 file changed, 66 insertions(+), 16 deletions(-) (limited to 'include/configs') diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 3a644d3..37f8cff 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -63,6 +63,10 @@ #define CFG_IMMR 0xE0000000 +#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) +#define CONFIG_DEFAULT_IMMR CFG_IMMR +#endif + #define CFG_MEMTEST_START 0x00001000 #define CFG_MEMTEST_END 0x07f00000 @@ -173,10 +177,10 @@ #define CFG_FLASH_EMPTY_INFO /* display empty sectors */ #define CFG_FLASH_USE_BUFFER_WRITE /* buffer up multiple bytes */ -#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* flash Base address */ \ +#define CFG_NOR_BR_PRELIM (CFG_FLASH_BASE | /* flash Base address */ \ (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ BR_V) /* valid */ -#define CFG_OR0_PRELIM ( 0xFF000000 /* 16 MByte */ \ +#define CFG_NOR_OR_PRELIM ( 0xFF800000 /* 8 MByte */ \ | OR_GPCM_XACS \ | OR_GPCM_SCY_9 \ | OR_GPCM_EHTR \ @@ -193,7 +197,7 @@ #define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ -#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) && !defined(CONFIG_NAND_SPL) #define CFG_RAMBOOT #endif @@ -220,19 +224,31 @@ #define CFG_LBC_MRTPR 0x20000000 /*TODO */ /* LB refresh timer prescal, 266MHz/32 */ /* drivers/mtd/nand/nand.c */ -#define CFG_NAND_BASE 0xE2800000 /* 0xF0000000 */ +#ifdef CONFIG_NAND_SPL +#define CFG_NAND_BASE 0xFFF00000 +#else +#define CFG_NAND_BASE 0xE2800000 +#endif + #define CFG_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS 1 #define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 +#define CFG_NAND_BLOCK_SIZE 16384 + +#define CFG_NAND_U_BOOT_SIZE (512 << 10) +#define CFG_NAND_U_BOOT_DST 0x00100000 +#define CFG_NAND_U_BOOT_START 0x00100100 +#define CFG_NAND_U_BOOT_OFFS 16384 +#define CFG_NAND_U_BOOT_RELOC 0x00010000 -#define CFG_BR1_PRELIM ( CFG_NAND_BASE \ +#define CFG_NAND_BR_PRELIM ( CFG_NAND_BASE \ | (2<