From 9c4c5ae3e10e4f2ca799aacbb74e1f5adb86e0b5 Mon Sep 17 00:00:00 2001
From: Jon Loeliger <jdl@freescale.com>
Date: Sat, 23 Jul 2005 10:37:35 -0500
Subject: * Patch by Jon Loeliger, Kumar Gala 2005-02-08   - Convert the CPM2
 based functionality to use new CONFIG_CPM2     option rather than a myriad of
 CONFIG_MPC8560-like variants.     Applies to MPC85xx and MPC8260 boards,
 includes stxgp3 and sbc8560.     Eliminates the CONFIG_MPC8560 option
 entirely.  Distributes the     new CONFIG_CPM2 option to each 8260 board.

---
 include/configs/CPU86.h          | 1 +
 include/configs/CPU87.h          | 1 +
 include/configs/IDS8247.h        | 1 +
 include/configs/IPHASE4539.h     | 2 ++
 include/configs/ISPAN.h          | 1 +
 include/configs/MPC8260ADS.h     | 2 ++
 include/configs/MPC8266ADS.h     | 1 +
 include/configs/MPC8541CDS.h     | 1 +
 include/configs/MPC8555CDS.h     | 1 +
 include/configs/MPC8560ADS.h     | 2 +-
 include/configs/PM826.h          | 1 +
 include/configs/PM828.h          | 1 +
 include/configs/RPXsuper.h       | 1 +
 include/configs/Rattler.h        | 2 ++
 include/configs/SBC8540.h        | 2 +-
 include/configs/SBC8560.h        | 2 +-
 include/configs/SCM.h            | 1 +
 include/configs/TQM8260.h        | 2 ++
 include/configs/ZPC1900.h        | 1 +
 include/configs/atc.h            | 1 +
 include/configs/cogent_mpc8260.h | 1 +
 include/configs/ep8260.h         | 2 ++
 include/configs/gw8260.h         | 1 +
 include/configs/hymod.h          | 1 +
 include/configs/ppmc8260.h       | 1 +
 include/configs/rsdproto.h       | 1 +
 include/configs/sacsng.h         | 1 +
 include/configs/sbc8260.h        | 1 +
 include/configs/sbc8560.h        | 2 +-
 include/configs/stxgp3.h         | 2 +-
 30 files changed, 35 insertions(+), 5 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h
index ce7ccc2..09185b1 100644
--- a/include/configs/CPU86.h
+++ b/include/configs/CPU86.h
@@ -35,6 +35,7 @@
 
 #define CONFIG_MPC8260		1	/* This is an MPC8260 CPU		*/
 #define CONFIG_CPU86		1	/* ...on a CPU86 board	*/
+#define CONFIG_CPM2		1	/* Has a CPM2 */
 
 /*
  * select serial console configuration
diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h
index 0e0876f..c50870f 100644
--- a/include/configs/CPU87.h
+++ b/include/configs/CPU87.h
@@ -36,6 +36,7 @@
 #define CONFIG_MPC8260		1	/* This is an MPC8260 CPU		*/
 #define CONFIG_CPU87		1	/* ...on a CPU87 board	*/
 #define CONFIG_PCI
+#define CONFIG_CPM2		1	/* Has a CPM2 */
 
 /*
  * select serial console configuration
diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h
index c4fb01d..729b048 100644
--- a/include/configs/IDS8247.h
+++ b/include/configs/IDS8247.h
@@ -37,6 +37,7 @@
 #define CONFIG_MPC8272_FAMILY	1
 #define CONFIG_IDS8247		1
 #define CPU_ID_STR		"MPC8247"
+#define CONFIG_CPM2		1	/* Has a CPM2 */
 
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
 
diff --git a/include/configs/IPHASE4539.h b/include/configs/IPHASE4539.h
index 6b7079e..c1565fc 100644
--- a/include/configs/IPHASE4539.h
+++ b/include/configs/IPHASE4539.h
@@ -40,6 +40,8 @@
 #define CONFIG_MPC8260		1	/* This is an MPC8260 CPU   */
 #define CONFIG_IPHASE4539	1	/* ...on a Interphase 4539 PMC */
 
+#define CONFIG_CPM2		1	/* Has a CPM2 */
+
 /*-----------------------------------------------------------------------
  * select serial console configuration
  *
diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h
index 8aa18ca..65056a2 100644
--- a/include/configs/ISPAN.h
+++ b/include/configs/ISPAN.h
@@ -31,6 +31,7 @@
 
 #define CONFIG_MPC8260			/* This is an MPC8260 CPU               */
 #define CONFIG_ISPAN			/* ...on one of Interphase iSPAN boards */
+#define CONFIG_CPM2		1	/* Has a CPM2 */
 
 /*-----------------------------------------------------------------------
  * Select serial console configuration
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index ed8fe6b..bba476a 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -42,6 +42,8 @@
 
 #define CONFIG_MPC8260ADS	1	/* Motorola PQ2 ADS family board */
 
+#define CONFIG_CPM2		1	/* Has a CPM2 */
+
 /*
  * Figure out if we are booting low via flash HRCW or high via the BCSR.
  */
diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
index 89f2d09..d8e91a5 100644
--- a/include/configs/MPC8266ADS.h
+++ b/include/configs/MPC8266ADS.h
@@ -51,6 +51,7 @@
 
 #define CONFIG_MPC8260		1	/* This is an MPC8260 CPU	*/
 #define CONFIG_MPC8266ADS	1	/* ...on motorola ADS board	*/
+#define CONFIG_CPM2		1	/* Has a CPM2 */
 
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f	*/
 
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index 3dd4957..cf15b88 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -33,6 +33,7 @@
 #define CONFIG_BOOKE		1	/* BOOKE */
 #define CONFIG_E500		1	/* BOOKE e500 family */
 #define CONFIG_MPC85xx		1	/* MPC8540/60/55/41 */
+#define CONFIG_CPM2		1	/* has CPM2 */
 #define CONFIG_MPC8541		1	/* MPC8541 specific */
 #define CONFIG_MPC8541CDS	1	/* MPC8541CDS board specific */
 
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 379a12c..78b622f 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -33,6 +33,7 @@
 #define CONFIG_BOOKE		1	/* BOOKE */
 #define CONFIG_E500		1	/* BOOKE e500 family */
 #define CONFIG_MPC85xx		1	/* MPC8540/60/55/41 */
+#define CONFIG_CPM2		1	/* has CPM2 */
 #define CONFIG_MPC8555		1	/* MPC8555 specific */
 #define CONFIG_MPC8555CDS	1	/* MPC8555CDS board specific */
 
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 7271737..e1a2bba 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -38,7 +38,7 @@
 #define CONFIG_BOOKE		1	/* BOOKE */
 #define CONFIG_E500		1	/* BOOKE e500 family */
 #define CONFIG_MPC85xx		1	/* MPC8540/MPC8560 */
-#define CONFIG_MPC8560		1	/* MPC8560 specific */
+#define CONFIG_CPM2		1	/* has CPM2 */
 #define CONFIG_MPC8560ADS	1	/* MPC8560ADS board specific */
 
 #define CONFIG_PCI
diff --git a/include/configs/PM826.h b/include/configs/PM826.h
index a4c4fc9..9ca1e52 100644
--- a/include/configs/PM826.h
+++ b/include/configs/PM826.h
@@ -37,6 +37,7 @@
 
 #define CONFIG_MPC8260		1	/* This is a MPC8260 CPU	*/
 #define CONFIG_PM826		1	/* ...on a PM8260 module	*/
+#define CONFIG_CPM2		1	/* Has a CPM2 */
 
 #undef CONFIG_DB_CR826_J30x_ON		/* J30x jumpers on D.B. carrier	*/
 
diff --git a/include/configs/PM828.h b/include/configs/PM828.h
index 5b71c96..7d98df5 100644
--- a/include/configs/PM828.h
+++ b/include/configs/PM828.h
@@ -37,6 +37,7 @@
 
 #define CONFIG_MPC8260		1	/* This is a MPC8260 CPU	*/
 #define CONFIG_PM828		1	/* ...on a PM828 module */
+#define CONFIG_CPM2		1	/* Has a CPM2 */
 
 #undef CONFIG_DB_CR826_J30x_ON		/* J30x jumpers on D.B. carrier */
 
diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h
index cdf716c..6ae9403 100644
--- a/include/configs/RPXsuper.h
+++ b/include/configs/RPXsuper.h
@@ -173,6 +173,7 @@
 
 #define CONFIG_MPC8260          1       /* This is an MPC8260 CPU   */
 #define CONFIG_RPXSUPER         1       /* on an Embedded Planet RPX Super Board  */
+#define CONFIG_CPM2		1	/* Has a CPM2 */
 
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f	*/
 
diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h
index f98a6c6..a552970 100644
--- a/include/configs/Rattler.h
+++ b/include/configs/Rattler.h
@@ -33,6 +33,8 @@
 #define CPU_ID_STR		"MPC8250"
 #endif /* CONFIG_MPC8248 */
 
+#define CONFIG_CPM2		1	/* Has a CPM2 */
+
 #define CONFIG_RATTLER			/* Analogue&Micro Rattler board */
 
 #undef DEBUG
diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index 60561eb..5bdabfe 100644
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -46,7 +46,7 @@
 #define CONFIG_MPC85xx_REV1	1	/* MPC85xx Rev 1.0 chip		*/
 
 
-#define CONFIG_MPC8560		1	/* MPC8560 (CPU) specific		*/
+#define CONFIG_CPM2		1	/* has CPM2 */
 
 #define CONFIG_SBC8540      	1   	/* configuration for SBC8560 board */
 
diff --git a/include/configs/SBC8560.h b/include/configs/SBC8560.h
index 6bd0abe..ca7e5dd 100644
--- a/include/configs/SBC8560.h
+++ b/include/configs/SBC8560.h
@@ -46,7 +46,7 @@
 #define CONFIG_MPC85xx_REV1	1	/* MPC85xx Rev 1.0 chip		*/
 
 
-#define CONFIG_MPC8560		1	/* MPC8560 (CPU) specific		*/
+#define CONFIG_CPM2		1	/* has CPM2 */
 #define CONFIG_SBC8560      	1   	/* configuration for SBC8560 board */
 
 #define CONFIG_MPC8560ADS	1	/* MPC8560ADS board specific (supplement)	*/
diff --git a/include/configs/SCM.h b/include/configs/SCM.h
index e4533b4..91914e8 100644
--- a/include/configs/SCM.h
+++ b/include/configs/SCM.h
@@ -36,6 +36,7 @@
 #define CONFIG_MPC8260		1	/* This is a MPC8260 CPU		*/
 #define CONFIG_TQM8260		200	/* ...on a TQM8260 module Rev.200	*/
 #define CONFIG_SCM              1	/* ...on a System Controller Module	*/
+#define CONFIG_CPM2		1	/* Has a CPM2 */
 
 #if (CONFIG_TQM8260 <= 100)
 #  error "TQM8260 module revison not supported"
diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h
index eaf138a..e6266b5 100644
--- a/include/configs/TQM8260.h
+++ b/include/configs/TQM8260.h
@@ -52,6 +52,8 @@
 #define CONFIG_TQM8260		200	/* ...on a TQM8260 module Rev.200	*/
 #endif
 
+#define CONFIG_CPM2		1	/* Has a CPM2 */
+
 #define CONFIG_82xx_CONS_SMC1	1	/* console on SMC1			*/
 
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h
index 6857973..f71e691 100644
--- a/include/configs/ZPC1900.h
+++ b/include/configs/ZPC1900.h
@@ -30,6 +30,7 @@
 #define CONFIG_MPC8260		1	/* This is an MPC8260 CPU      */
 #define CONFIG_ZPC1900		1	/* ...on Zephyr ZPC.1900 board */
 #define CPU_ID_STR		"MPC8265"
+#define CONFIG_CPM2		1	/* Has a CPM2 */
 
 #undef DEBUG
 
diff --git a/include/configs/atc.h b/include/configs/atc.h
index 2751248..881a4ca 100644
--- a/include/configs/atc.h
+++ b/include/configs/atc.h
@@ -35,6 +35,7 @@
 
 #define CONFIG_MPC8260		1	/* This is an MPC8260 CPU		*/
 #define CONFIG_ATC		1	/* ...on a ATC board	*/
+#define CONFIG_CPM2		1	/* Has a CPM2 */
 
 /*
  * select serial console configuration
diff --git a/include/configs/cogent_mpc8260.h b/include/configs/cogent_mpc8260.h
index b3ec89b..aea2e64 100644
--- a/include/configs/cogent_mpc8260.h
+++ b/include/configs/cogent_mpc8260.h
@@ -35,6 +35,7 @@
 
 #define CONFIG_MPC8260		1	/* This is an MPC8260 CPU	*/
 #define CONFIG_COGENT		1	/* using Cogent Modular Architecture */
+#define CONFIG_CPM2		1	/* Has a CPM2 */
 
 #define	CONFIG_MISC_INIT_F	1	/* Use misc_init_f()		*/
 
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index fb335db..98e1716 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -48,6 +48,8 @@
 #define CFG_EP8260_H2	1
 /* #undef CFG_EP8260_H2  */
 
+#define CONFIG_CPM2		1	/* Has a CPM2 */
+
 /* What is the oscillator's (UX2) frequency in Hz? */
 #define CONFIG_8260_CLKIN  (66 * 1000 * 1000)
 
diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h
index 3666bdb..6c08043 100644
--- a/include/configs/gw8260.h
+++ b/include/configs/gw8260.h
@@ -330,6 +330,7 @@
 
 #define CONFIG_MPC8260      1   /* This is an MPC8260 CPU   */
 #define CONFIG_GW8260       1   /* on an GW8260 Board  */
+#define CONFIG_CPM2		1	/* Has a CPM2 */
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index 90d6b25..0d62b9e 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -35,6 +35,7 @@
 
 #define CONFIG_MPC8260		1	/* This is an MPC8260 CPU	*/
 #define CONFIG_HYMOD		1	/* ...on a Hymod board		*/
+#define CONFIG_CPM2		1	/* Has a CPM2 */
 
 #define	CONFIG_MISC_INIT_F	1	/* Use misc_init_f()		*/
 
diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h
index 2ad2867..60b0b37 100644
--- a/include/configs/ppmc8260.h
+++ b/include/configs/ppmc8260.h
@@ -297,6 +297,7 @@
 
 #define CONFIG_MPC8260		1	/* This is an MPC8260 CPU   */
 #define CONFIG_PPMC8260		1	/* on an Wind River PPMC8260 Board  */
+#define CONFIG_CPM2		1	/* Has a CPM2 */
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h
index b1f6cb2..6c9e392 100644
--- a/include/configs/rsdproto.h
+++ b/include/configs/rsdproto.h
@@ -37,6 +37,7 @@
 
 #define CONFIG_MPC8260		1	/* This is an MPC8260 CPU	*/
 #define CONFIG_RSD_PROTO	1	/* on a R&S Protocol Board      */
+#define CONFIG_CPM2		1	/* Has a CPM2 */
 
 #define	CONFIG_MISC_INIT_F	1	/* Use misc_init_f()		*/
 
diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h
index cc9774c..031eba5 100644
--- a/include/configs/sacsng.h
+++ b/include/configs/sacsng.h
@@ -544,6 +544,7 @@
 #define CONFIG_MPC8260		1	/* This is an MPC8260 CPU   */
 #define CONFIG_SBC8260		1	/* on an EST SBC8260 Board  */
 #define CONFIG_SACSng		1	/* munged for the SACSng */
+#define CONFIG_CPM2		1	/* Has a CPM2 */
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h
index dc9cec3..45e4494 100644
--- a/include/configs/sbc8260.h
+++ b/include/configs/sbc8260.h
@@ -481,6 +481,7 @@
 
 #define CONFIG_MPC8260		1	/* This is an MPC8260 CPU   */
 #define CONFIG_SBC8260		1	/* on an EST SBC8260 Board  */
+#define CONFIG_CPM2		1	/* Has a CPM2 */
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index 8cf9eeb..72a3091 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -40,7 +40,7 @@
 #define CONFIG_MPC85xx_REV1	1	/* MPC85xx Rev 1.0 chip		*/
 
 
-#define CONFIG_MPC8560		1	/* MPC8560 specific		*/
+#define CONFIG_CPM2		1	/* has CPM2 */
 #define CONFIG_SBC8560		1	/* configuration for SBC8560 board */
 
 /* XXX flagging this as something I might want to delete */
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index e9261db..b5684d3 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -39,7 +39,7 @@
 #define CONFIG_BOOKE		1	/* BOOKE		*/
 #define CONFIG_E500		1	/* BOOKE e500 family	*/
 #define CONFIG_MPC85xx		1	/* MPC8540/MPC8560	*/
-#define CONFIG_MPC8560		1	/* MPC8560 specific	*/
+#define CONFIG_CPM2		1	/* has CPM2 */
 #define CONFIG_STXGP3		1	/* Silicon Tx GPPP board specific*/
 
 #undef  CONFIG_PCI	         	/* pci ethernet support	*/
-- 
cgit v1.1


From 7202d43ddea00e8186ea18bb85d6efb5c0525623 Mon Sep 17 00:00:00 2001
From: Jon Loeliger <jdl@freescale.com>
Date: Mon, 25 Jul 2005 11:13:26 -0500
Subject: * Patch by Jon Loeliger, Kumar Gala, 2005-02-08   For MPC85xxCDS:    
 Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow     for faster flash
 parts.     Add documentation for BR/OR for FLASH.

---
 include/configs/MPC8541CDS.h | 51 ++++++++++++++++++++++++++++++++++++--------
 include/configs/MPC8555CDS.h | 51 ++++++++++++++++++++++++++++++++++++--------
 2 files changed, 84 insertions(+), 18 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index cf15b88..3ec27b8 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -95,18 +95,50 @@ extern unsigned long get_clock_freq(void);
 #error ("CONFIG_SPD_EEPROM is required by MPC85555CDS")
 #endif
 
+#undef CONFIG_CLOCKS_IN_MHZ
+
+
 /*
- * SDRAM on the Local Bus
+ * Local Bus Definitions
  */
-#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
-#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+
+/*
+ * FLASH on the Local Bus
+ * Two banks, 8M each, using the CFI driver.
+ * Boot from BR0/OR0 bank at 0xff00_0000
+ * Alternate BR1/OR1 bank at 0xff80_0000
+ *
+ * BR0, BR1:
+ *    Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0
+ *    Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0
+ *    Port Size = 16 bits = BRx[19:20] = 10
+ *    Use GPCM = BRx[24:26] = 000
+ *    Valid = BRx[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001    BR0
+ * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001    BR1
+ *
+ * OR0, OR1:
+ *    Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0
+ *    Reserved ORx[17:18] = 11, confusion here?
+ *    CSNT = ORx[20] = 1
+ *    ACS = half cycle delay = ORx[21:22] = 11
+ *    SCY = 6 = ORx[24:27] = 0110
+ *    TRLX = use relaxed timing = ORx[29] = 1
+ *    EAD = use external address latch delay = OR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65    ORx
+ */
+
 #define CFG_FLASH_BASE		0xff000000	/* start of FLASH 8M */
 
-#define CFG_BR0_PRELIM		0xff801001	/* port size 16bit */
-#define CFG_BR1_PRELIM		0xff001001	/* port size 16bit */
+#define CFG_BR0_PRELIM		0xff801001
+#define CFG_BR1_PRELIM		0xff001001
 
-#define	CFG_OR0_PRELIM		0xff806e61	/* 8MB Flash */
-#define	CFG_OR1_PRELIM		0xff806e61	/* 8MB Flash */
+#define	CFG_OR0_PRELIM		0xff806e65
+#define	CFG_OR1_PRELIM		0xff806e65
 
 #define CFG_FLASH_BANKS_LIST	{0xff800000, CFG_FLASH_BASE}
 #define CFG_MAX_FLASH_BANKS	2		/* number of banks */
@@ -121,11 +153,12 @@ extern unsigned long get_clock_freq(void);
 #define CFG_FLASH_CFI
 #define CFG_FLASH_EMPTY_INFO
 
-#undef CONFIG_CLOCKS_IN_MHZ
 
 /*
- * Local Bus Definitions
+ * SDRAM on the Local Bus
  */
+#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
+#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
 
 /*
  * Base Register 2 and Option Register 2 configure SDRAM.
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 78b622f..7967e90 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -95,18 +95,50 @@ extern unsigned long get_clock_freq(void);
 #error ("CONFIG_SPD_EEPROM is required by MPC85555CDS")
 #endif
 
+#undef CONFIG_CLOCKS_IN_MHZ
+
+
 /*
- * SDRAM on the Local Bus
+ * Local Bus Definitions
  */
-#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
-#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+
+/*
+ * FLASH on the Local Bus
+ * Two banks, 8M each, using the CFI driver.
+ * Boot from BR0/OR0 bank at 0xff00_0000
+ * Alternate BR1/OR1 bank at 0xff80_0000
+ *
+ * BR0, BR1:
+ *    Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0
+ *    Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0
+ *    Port Size = 16 bits = BRx[19:20] = 10
+ *    Use GPCM = BRx[24:26] = 000
+ *    Valid = BRx[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001    BR0
+ * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001    BR1
+ *
+ * OR0, OR1:
+ *    Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0
+ *    Reserved ORx[17:18] = 11, confusion here?
+ *    CSNT = ORx[20] = 1
+ *    ACS = half cycle delay = ORx[21:22] = 11
+ *    SCY = 6 = ORx[24:27] = 0110
+ *    TRLX = use relaxed timing = ORx[29] = 1
+ *    EAD = use external address latch delay = OR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65    ORx
+ */
+
 #define CFG_FLASH_BASE		0xff000000	/* start of FLASH 8M */
 
-#define CFG_BR0_PRELIM		0xff801001	/* port size 16bit */
-#define CFG_BR1_PRELIM		0xff001001	/* port size 16bit */
+#define CFG_BR0_PRELIM		0xff801001
+#define CFG_BR1_PRELIM		0xff001001
 
-#define	CFG_OR0_PRELIM		0xff806e61	/* 8MB Flash */
-#define	CFG_OR1_PRELIM		0xff806e61	/* 8MB Flash */
+#define	CFG_OR0_PRELIM		0xff806e65
+#define	CFG_OR1_PRELIM		0xff806e65
 
 #define CFG_FLASH_BANKS_LIST	{0xff800000, CFG_FLASH_BASE}
 #define CFG_MAX_FLASH_BANKS	2		/* number of banks */
@@ -121,11 +153,12 @@ extern unsigned long get_clock_freq(void);
 #define CFG_FLASH_CFI
 #define CFG_FLASH_EMPTY_INFO
 
-#undef CONFIG_CLOCKS_IN_MHZ
 
 /*
- * Local Bus Definitions
+ * SDRAM on the Local Bus
  */
+#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
+#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
 
 /*
  * Base Register 2 and Option Register 2 configure SDRAM.
-- 
cgit v1.1


From 288693abe1f7c23e69479fd85c2c0d8d7fdbf8f2 Mon Sep 17 00:00:00 2001
From: Jon Loeliger <jdl@freescale.com>
Date: Mon, 25 Jul 2005 12:14:54 -0500
Subject: * Patch by Jon Loeliger, 2005-Feb-10   Add config option
 CONFIG_HAS_FEC calling out 8540 FEC features.

---
 include/configs/MPC8540ADS.h | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'include/configs')

diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 1c11c6f..533b587 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -41,6 +41,10 @@
 #define CONFIG_MPC8540		1	/* MPC8540 specific */
 #define CONFIG_MPC8540ADS	1	/* MPC8540ADS board specific */
 
+#ifndef CONFIG_HAS_FEC
+#define CONFIG_HAS_FEC		1	/* 8540 has FEC */
+#endif
+
 #define CONFIG_PCI
 #define CONFIG_TSEC_ENET 		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
@@ -344,9 +348,12 @@
 #define TSEC1_PHYIDX		0
 #define TSEC2_PHYIDX		0
 
+
+#if CONFIG_HAS_FEC
 #define CONFIG_MPC85XX_FEC	1
 #define FEC_PHY_ADDR		3
 #define FEC_PHYIDX		0
+#endif
 
 #define CONFIG_ETHPRIME		"MOTO ENET0"
 
-- 
cgit v1.1


From d9b94f28a442b0013caef99de084d7b72e2d4607 Mon Sep 17 00:00:00 2001
From: Jon Loeliger <jdl@freescale.com>
Date: Mon, 25 Jul 2005 14:05:07 -0500
Subject: * Patch by Jon Loeliger, 2005-05-05   Implemented support for
 MPC8548CDS board.   Added DDR II support based on SPD values for MPC85xx
 boards.   This roll-up patch also includes bugfies for the previously  
 published patches:     DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC
 3&4 I/O

---
 include/configs/MPC8540ADS.h |  10 +-
 include/configs/MPC8541CDS.h |  13 +-
 include/configs/MPC8548CDS.h | 521 +++++++++++++++++++++++++++++++++++++++++++
 include/configs/MPC8555CDS.h |  13 +-
 include/configs/MPC8560ADS.h |  10 +-
 include/configs/PM854.h      |  10 +-
 include/configs/SBC8540.h    |  12 +-
 include/configs/SBC8560.h    |  12 +-
 include/configs/TQM8540.h    |   6 +-
 include/configs/TQM8560.h    |   3 +-
 include/configs/sbc8560.h    |  12 +-
 include/configs/stxgp3.h     |   4 +-
 12 files changed, 599 insertions(+), 27 deletions(-)
 create mode 100644 include/configs/MPC8548CDS.h

(limited to 'include/configs')

diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 533b587..131c832 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -49,10 +49,12 @@
 #define CONFIG_TSEC_ENET 		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
-#define CONFIG_DDR_ECC			/* only for ECC DDR module */
 #define CONFIG_DDR_DLL			/* possible DLL fix needed */
 #define CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
 
+#define CONFIG_DDR_ECC			/* only for ECC DDR module */
+#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
+
 
 /*
  * sysclk for MPC85xx
@@ -342,7 +344,9 @@
 
 #define CONFIG_MII		1	/* MII PHY management */
 #define CONFIG_MPC85XX_TSEC1	1
+#define CONFIG_MPC85XX_TSEC1_NAME	"TSEC0"
 #define CONFIG_MPC85XX_TSEC2	1
+#define CONFIG_MPC85XX_TSEC2_NAME	"TSEC1"
 #define TSEC1_PHY_ADDR		0
 #define TSEC2_PHY_ADDR		1
 #define TSEC1_PHYIDX		0
@@ -351,11 +355,13 @@
 
 #if CONFIG_HAS_FEC
 #define CONFIG_MPC85XX_FEC	1
+#define CONFIG_MPC85XX_FEC_NAME		"FEC"
 #define FEC_PHY_ADDR		3
 #define FEC_PHYIDX		0
 #endif
 
-#define CONFIG_ETHPRIME		"MOTO ENET0"
+/* Options are: TSEC[0-1], FEC */
+#define CONFIG_ETHPRIME		"TSEC0"
 
 #endif	/* CONFIG_TSEC_ENET */
 
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index 3ec27b8..c96b98b 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -41,9 +41,12 @@
 #define CONFIG_TSEC_ENET 		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
-#define CONFIG_DDR_ECC			/* only for ECC DDR module */
 #define CONFIG_DDR_DLL			/* possible DLL fix needed */
-#define CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
+#undef CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
+
+#define CONFIG_DDR_ECC			/* only for ECC DDR module */
+#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
+
 
 /*
  * When initializing flash, if we cannot find the manufacturer ID,
@@ -360,7 +363,9 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_MII		1	/* MII PHY management */
 #define CONFIG_MPC85XX_TSEC1	1
+#define CONFIG_MPC85XX_TSEC1_NAME	"TSEC0"
 #define CONFIG_MPC85XX_TSEC2	1
+#define CONFIG_MPC85XX_TSEC2_NAME	"TSEC1"
 #undef CONFIG_MPC85XX_FEC
 #define TSEC1_PHY_ADDR		0
 #define TSEC2_PHY_ADDR		1
@@ -368,7 +373,9 @@ extern unsigned long get_clock_freq(void);
 #define TSEC1_PHYIDX		0
 #define TSEC2_PHYIDX		0
 #define FEC_PHYIDX		0
-#define CONFIG_ETHPRIME		"MOTO ENET0"
+
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME		"TSEC0"
 
 #endif	/* CONFIG_TSEC_ENET */
 
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
new file mode 100644
index 0000000..4ca8bc3
--- /dev/null
+++ b/include/configs/MPC8548CDS.h
@@ -0,0 +1,521 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mpc8548cds board configuration file
+ *
+ * Please refer to doc/README.mpc85xxcds for more info.
+ *
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE		1	/* BOOKE */
+#define CONFIG_E500		1	/* BOOKE e500 family */
+#define CONFIG_MPC85xx		1	/* MPC8540/60/55/41/48 */
+#define CONFIG_MPC8548		1	/* MPC8548 specific */
+#define CONFIG_MPC8548CDS	1	/* MPC8548CDS board specific */
+
+#undef CONFIG_PCI
+#define CONFIG_TSEC_ENET 		/* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
+#define CONFIG_DDR_DLL			/* possible DLL fix needed */
+#define CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
+
+#define CONFIG_DDR_ECC			/* only for ECC DDR module */
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
+#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
+
+
+/*
+ * When initializing flash, if we cannot find the manufacturer ID,
+ * assume this is the AMD flash associated with the CDS board.
+ * This allows booting from a promjet.
+ */
+#define CONFIG_ASSUME_AMD_FLASH
+
+#define MPC85xx_DDR_SDRAM_CLK_CNTL	/* 85xx has clock control reg */
+
+#ifndef __ASSEMBLY__
+extern unsigned long get_clock_freq(void);
+#endif
+#define CONFIG_SYS_CLK_FREQ	get_clock_freq() /* sysclk for MPC85xx */
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE		    	    /* toggle L2 cache 	*/
+#define CONFIG_BTB			    /* toggle branch predition */
+#define CONFIG_ADDR_STREAMING		    /* toggle addr streaming   */
+
+/*
+ * Only possible on E500 Version 2 or newer cores.
+ */
+#define CONFIG_ENABLE_36BIT_PHYS	1
+
+
+#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
+
+#undef	CFG_DRAM_TEST			/* memory test, takes time */
+#define CFG_MEMTEST_START	0x00200000	/* memtest works on */
+#define CFG_MEMTEST_END		0x00400000
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_CCSRBAR_DEFAULT 	0xff700000	/* CCSRBAR Default */
+#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
+#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
+#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+
+#define SPD_EEPROM_ADDRESS	0x51		/* DDR DIMM */
+
+/*
+ * Make sure required options are set
+ */
+#ifndef CONFIG_SPD_EEPROM
+#error ("CONFIG_SPD_EEPROM is required")
+#endif
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+
+/*
+ * Local Bus Definitions
+ */
+
+/*
+ * FLASH on the Local Bus
+ * Two banks, 8M each, using the CFI driver.
+ * Boot from BR0/OR0 bank at 0xff00_0000
+ * Alternate BR1/OR1 bank at 0xff80_0000
+ *
+ * BR0, BR1:
+ *    Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0
+ *    Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0
+ *    Port Size = 16 bits = BRx[19:20] = 10
+ *    Use GPCM = BRx[24:26] = 000
+ *    Valid = BRx[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001    BR0
+ * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001    BR1
+ *
+ * OR0, OR1:
+ *    Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0
+ *    Reserved ORx[17:18] = 11, confusion here?
+ *    CSNT = ORx[20] = 1
+ *    ACS = half cycle delay = ORx[21:22] = 11
+ *    SCY = 6 = ORx[24:27] = 0110
+ *    TRLX = use relaxed timing = ORx[29] = 1
+ *    EAD = use external address latch delay = OR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65    ORx
+ */
+
+#define CFG_FLASH_BASE		0xff000000	/* start of FLASH 8M */
+
+#define CFG_BR0_PRELIM		0xff801001
+#define CFG_BR1_PRELIM		0xff001001
+
+#define	CFG_OR0_PRELIM		0xff806e65
+#define	CFG_OR1_PRELIM		0xff806e65
+
+#define CFG_FLASH_BANKS_LIST	{0xff800000, CFG_FLASH_BASE}
+#define CFG_MAX_FLASH_BANKS	2		/* number of banks */
+#define CFG_MAX_FLASH_SECT	128		/* sectors per device */
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+
+#define CFG_MONITOR_BASE    	TEXT_BASE	/* start of monitor */
+
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_FLASH_EMPTY_INFO
+
+
+/*
+ * SDRAM on the Local Bus
+ */
+#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
+#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+
+/*
+ * Base Register 2 and Option Register 2 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR2, need:
+ *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ *    port-size = 32-bits = BR2[19:20] = 11
+ *    no parity checking = BR2[21:22] = 00
+ *    SDRAM for MSEL = BR2[24:26] = 011
+ *    Valid = BR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
+ *
+ * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * FIXME: the top 17 bits of BR2.
+ */
+
+#define CFG_BR2_PRELIM          0xf0001861
+
+/*
+ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ *
+ * For OR2, need:
+ *    64MB mask for AM, OR2[0:7] = 1111 1100
+ *		   XAM, OR2[17:18] = 11
+ *    9 columns OR2[19-21] = 010
+ *    13 rows   OR2[23-25] = 100
+ *    EAD set for extra time OR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
+ */
+
+#define CFG_OR2_PRELIM		0xfc006901
+
+#define CFG_LBC_LCRR		0x00030004    /* LB clock ratio reg */
+#define CFG_LBC_LBCR		0x00000000    /* LB config reg */
+#define CFG_LBC_LSRT		0x20000000  /* LB sdram refresh timer */
+#define CFG_LBC_MRTPR		0x00000000  /* LB refresh timer prescal*/
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_RFEN	(1 << (31 -  1))
+#define CFG_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
+#define CFG_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
+#define CFG_LBC_LSDMR_RFCR16	(7 << (31 - 16))
+#define CFG_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
+#define CFG_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
+#define CFG_LBC_LSDMR_BL8	(1 << (31 - 23))
+#define CFG_LBC_LSDMR_WRC4	(0 << (31 - 27))
+#define CFG_LBC_LSDMR_CL3	(3 << (31 - 31))
+
+#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+
+/*
+ * Common settings for all Local Bus SDRAM commands.
+ * At run time, either BSMA1516 (for CPU 1.1)
+ *                  or BSMA1617 (for CPU 1.0) (old)
+ * is OR'ed in too.
+ */
+#define CFG_LBC_LSDMR_COMMON	( CFG_LBC_LSDMR_RFCR16		\
+				| CFG_LBC_LSDMR_PRETOACT7	\
+				| CFG_LBC_LSDMR_ACTTORW7	\
+				| CFG_LBC_LSDMR_BL8		\
+				| CFG_LBC_LSDMR_WRC4		\
+				| CFG_LBC_LSDMR_CL3		\
+				| CFG_LBC_LSDMR_RFEN		\
+				)
+
+/*
+ * The CADMUS registers are connected to CS3 on CDS.
+ * The new memory map places CADMUS at 0xf8000000.
+ *
+ * For BR3, need:
+ *    Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0
+ *    port-size = 8-bits  = BR[19:20] = 01
+ *    no parity checking  = BR[21:22] = 00
+ *    GPMC for MSEL       = BR[24:26] = 000
+ *    Valid               = BR[31]    = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801
+ *
+ * For OR3, need:
+ *    1 MB mask for AM,   OR[0:16]  = 1111 1111 1111 0000 0
+ *    disable buffer ctrl OR[19]    = 0
+ *    CSNT                OR[20]    = 1
+ *    ACS                 OR[21:22] = 11
+ *    XACS                OR[23]    = 1
+ *    SCY 15 wait states  OR[24:27] = 1111	max is suboptimal but safe
+ *    SETA                OR[28]    = 0
+ *    TRLX                OR[29]    = 1
+ *    EHTR                OR[30]    = 1
+ *    EAD extra time      OR[31]    = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7
+ */
+
+#define CADMUS_BASE_ADDR 0xf8000000
+#define CFG_BR3_PRELIM   0xf8000801
+#define CFG_OR3_PRELIM   0xfff00ff7
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK 	1
+#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
+#define CFG_INIT_RAM_END    	0x4000	    /* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE  	128	    /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN	    	(256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN	    	(128 * 1024)	/* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX     2
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE    1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1        (CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2        (CFG_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef  CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* I2C */
+#define CONFIG_HARD_I2C			/* I2C with hardware support */
+#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_EEPROM_ADDR	0x57
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE	0x80000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI1_IO_BASE	0xe2000000
+#define CFG_PCI1_IO_PHYS	CFG_PCI1_IO_BASE
+#define CFG_PCI1_IO_SIZE	0x1000000	/* 16M */
+
+#define CFG_PCI2_MEM_BASE	0xa0000000
+#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
+#define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI2_IO_BASE	0xe3000000
+#define CFG_PCI2_IO_PHYS	CFG_PCI2_IO_BASE
+#define CFG_PCI2_IO_SIZE	0x1000000	/* 16M */
+
+
+#if defined(CONFIG_PCI)
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+
+#if !defined(CONFIG_PCI_PNP)
+    #define PCI_ENET0_IOADDR      0xe0000000
+    #define PCI_ENET0_MEMADDR     0xe0000000
+    #define PCI_IDSEL_NUMBER      0x0c 	/*slot0->3(IDSEL)=12->15*/
+#endif
+
+#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
+
+#endif	/* CONFIG_PCI */
+
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 	1
+#endif
+
+#define CONFIG_MII		1	/* MII PHY management */
+#define CONFIG_MPC85XX_TSEC1	1
+#define CONFIG_MPC85XX_TSEC1_NAME	"eTSEC0"
+#define CONFIG_MPC85XX_TSEC2	1
+#define CONFIG_MPC85XX_TSEC2_NAME	"eTSEC1"
+#define CONFIG_MPC85XX_TSEC3	1
+#define CONFIG_MPC85XX_TSEC3_NAME	"eTSEC2"
+#define CONFIG_MPC85XX_TSEC4	1
+#define CONFIG_MPC85XX_TSEC4_NAME	"eTSEC3"
+#undef CONFIG_MPC85XX_FEC
+
+#define TSEC1_PHY_ADDR		0
+#define TSEC2_PHY_ADDR		1
+#define TSEC3_PHY_ADDR		2
+#define TSEC4_PHY_ADDR		3
+#define FEC_PHY_ADDR		3
+
+#define TSEC1_PHYIDX		0
+#define TSEC2_PHYIDX		0
+#define TSEC3_PHYIDX		0
+#define TSEC4_PHYIDX		0
+#define FEC_PHYIDX		0
+
+/* Options are: eTSEC[0-3] */
+#define CONFIG_ETHPRIME		"eTSEC0"
+
+#endif	/* CONFIG_TSEC_ENET */
+
+/*
+ * Environment
+ */
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+#define CFG_ENV_SIZE		0x2000
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+#if defined(CONFIG_PCI)
+#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL \
+				| CFG_CMD_PCI \
+				| CFG_CMD_PING \
+				| CFG_CMD_I2C \
+				| CFG_CMD_MII)
+#else
+#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL \
+				| CFG_CMD_PING \
+				| CFG_CMD_I2C \
+				| CFG_CMD_MII)
+#endif
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	*/
+#define CFG_LOAD_ADDR	0x2000000	/* default load address */
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	(8 << 20) 	/* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE	32768
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+/* The mac addresses for all ethernet interface */
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_ETHADDR   00:E0:0C:00:00:FD
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR  00:E0:0C:00:01:FD
+#define CONFIG_HAS_ETH2
+#define CONFIG_ETH2ADDR  00:E0:0C:00:02:FD
+#endif
+
+#define CONFIG_IPADDR    192.168.1.253
+
+#define CONFIG_HOSTNAME  unknown
+#define CONFIG_ROOTPATH  /nfsroot
+#define CONFIG_BOOTFILE  your.uImage
+
+#define CONFIG_SERVERIP  192.168.1.1
+#define CONFIG_GATEWAYIP 192.168.1.1
+#define CONFIG_NETMASK   255.255.255.0
+
+#define CONFIG_LOADADDR  200000   /*default location for tftp and bootm*/
+
+#define CONFIG_BOOTDELAY 10       /* -1 disables auto-boot */
+#undef  CONFIG_BOOTARGS           /* the boot command will set bootargs*/
+
+#define CONFIG_BAUDRATE	115200
+
+#define	CONFIG_EXTRA_ENV_SETTINGS				        \
+   "netdev=eth0\0"                                                      \
+   "consoledev=ttyS1\0"                                                 \
+   "ramdiskaddr=400000\0"                                               \
+   "ramdiskfile=your.ramdisk.u-boot\0"
+
+#define CONFIG_NFSBOOTCOMMAND	                                        \
+   "setenv bootargs root=/dev/nfs rw "                                  \
+      "nfsroot=$serverip:$rootpath "                                    \
+      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+      "console=$consoledev,$baudrate $othbootargs;"                     \
+   "tftp $loadaddr $bootfile;"                                          \
+   "bootm $loadaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+   "setenv bootargs root=/dev/ram rw "                                  \
+      "console=$consoledev,$baudrate $othbootargs;"                     \
+   "tftp $ramdiskaddr $ramdiskfile;"                                    \
+   "tftp $loadaddr $bootfile;"                                          \
+   "bootm $loadaddr $ramdiskaddr"
+
+#define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 7967e90..a44e3ec 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -41,9 +41,12 @@
 #define CONFIG_TSEC_ENET 		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
-#define CONFIG_DDR_ECC			/* only for ECC DDR module */
 #define CONFIG_DDR_DLL			/* possible DLL fix needed */
-#define CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
+#undef CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
+
+#define CONFIG_DDR_ECC			/* only for ECC DDR module */
+#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
+
 
 /*
  * When initializing flash, if we cannot find the manufacturer ID,
@@ -360,7 +363,9 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_MII		1	/* MII PHY management */
 #define CONFIG_MPC85XX_TSEC1	1
+#define CONFIG_MPC85XX_TSEC1_NAME	"TSEC0"
 #define CONFIG_MPC85XX_TSEC2	1
+#define CONFIG_MPC85XX_TSEC2_NAME	"TSEC1"
 #undef CONFIG_MPC85XX_FEC
 #define TSEC1_PHY_ADDR		0
 #define TSEC2_PHY_ADDR		1
@@ -368,7 +373,9 @@ extern unsigned long get_clock_freq(void);
 #define TSEC1_PHYIDX		0
 #define TSEC2_PHYIDX		0
 #define FEC_PHYIDX		0
-#define CONFIG_ETHPRIME		"MOTO ENET0"
+
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME		"TSEC0"
 
 #endif	/* CONFIG_TSEC_ENET */
 
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index e1a2bba..db878cb 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -46,10 +46,12 @@
 #undef  CONFIG_ETHER_ON_FCC             /* cpm FCC ethernet support */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
-#define CONFIG_DDR_ECC			/* only for ECC DDR module */
 #define CONFIG_DDR_DLL			/* possible DLL fix needed */
 #define CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
 
+#define CONFIG_DDR_ECC			/* only for ECC DDR module */
+#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
+
 
 /*
  * sysclk for MPC85xx
@@ -337,13 +339,17 @@
 
 #define CONFIG_MII		1	/* MII PHY management */
 #define CONFIG_MPC85XX_TSEC1	1
+#define CONFIG_MPC85XX_TSEC1_NAME	"TSEC0"
 #define CONFIG_MPC85XX_TSEC2	1
+#define CONFIG_MPC85XX_TSEC2_NAME	"TSEC1"
 #undef CONFIG_MPC85XX_FEC
 #define TSEC1_PHY_ADDR		0
 #define TSEC2_PHY_ADDR		1
 #define TSEC1_PHYIDX		0
 #define TSEC2_PHYIDX		0
-#define CONFIG_ETHPRIME		"MOTO ENET0"
+
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME		"TSEC0"
 
 #elif defined(CONFIG_ETHER_ON_FCC)	/* CPM FCC Ethernet */
 
diff --git a/include/configs/PM854.h b/include/configs/PM854.h
index 69e1baf..12a7181 100644
--- a/include/configs/PM854.h
+++ b/include/configs/PM854.h
@@ -45,10 +45,12 @@
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 #undef	CONFIG_SPD_EEPROM		/* do not use SPD EEPROM for DDR setup*/
-#define CONFIG_DDR_ECC			/* only for ECC DDR module */
 #define CONFIG_DDR_DLL			/* possible DLL fix needed */
 #define CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
 
+#define CONFIG_DDR_ECC			/* only for ECC DDR module */
+#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
+
 
 /*
  * sysclk for MPC85xx
@@ -250,17 +252,21 @@
 
 #define CONFIG_MII		1	/* MII PHY management */
 #define CONFIG_MPC85XX_TSEC1	1
+#define CONFIG_MPC85XX_TSEC1_NAME	"TSEC0"
 #define CONFIG_MPC85XX_TSEC2	1
+#define CONFIG_MPC85XX_TSEC2_NAME	"TSEC1"
 #define TSEC1_PHY_ADDR		2
 #define TSEC2_PHY_ADDR		3
 #define TSEC1_PHYIDX		0
 #define TSEC2_PHYIDX		0
 
 #define CONFIG_MPC85XX_FEC	1
+#define CONFIG_MPC85XX_FEC_NAME		"FEC"
 #define FEC_PHY_ADDR		1
 #define FEC_PHYIDX		0
 
-#define CONFIG_ETHPRIME		"MOTO ENET0"
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME		"TSEC0"
 
 #define	CONFIG_HAS_ETH1		1
 #define	CONFIG_HAS_ETH2		1
diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index 5bdabfe..0451b20 100644
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -227,10 +227,14 @@
 
 #if defined(CONFIG_TSEC_ENET)		/* TSEC Ethernet port */
 
-  #define CONFIG_NET_MULTI	1
-  #define CONFIG_PHY_BCM5421S		/* GigaBit Ether PHY	     */
-  #define CONFIG_MII		1	/* MII PHY management		*/
-  #define CONFIG_PHY_ADDR	25	/* PHY address			*/
+#  define CONFIG_NET_MULTI	1
+#  define CONFIG_MPC85xx_TSEC1
+#  define CONFIG_MPC85xx_TSEC1_NAME	"TSEC0"
+#  define CONFIG_MII		1	/* MII PHY management		*/
+#  define TSEC1_PHY_ADDR	25
+#  define TSEC1_PHYIDX		0
+/* Options are: TSEC0 */
+#  define CONFIG_ETHPRIME		"TSEC0"
 
 
 #elif defined(CONFIG_ETHER_ON_FCC)	/* CPM FCC Ethernet */
diff --git a/include/configs/SBC8560.h b/include/configs/SBC8560.h
index ca7e5dd..8b46a17 100644
--- a/include/configs/SBC8560.h
+++ b/include/configs/SBC8560.h
@@ -215,10 +215,14 @@
 
 #if defined(CONFIG_TSEC_ENET)		/* TSEC Ethernet port */
 
-  #define CONFIG_NET_MULTI	1
-  #define CONFIG_PHY_BCM5421S		/* GigaBit Ether PHY	     */
-  #define CONFIG_MII		1	/* MII PHY management		*/
-  #define CONFIG_PHY_ADDR	25	/* PHY address			*/
+#  define CONFIG_NET_MULTI	1
+#  define CONFIG_MII		1	/* MII PHY management		*/
+#  define CONFIG_MPC85xx_TSEC1
+#  define CONFIG_MPC85xx_TSEC1_NAME	"TSEC0"
+#  define TSEC1_PHY_ADDR	25
+#  define TSEC1_PHYIDX		0
+/* Options are: TSEC0 */
+#  define CONFIG_ETHPRIME		"TSEC0"
 
 
 #elif defined(CONFIG_ETHER_ON_FCC)	/* CPM FCC Ethernet */
diff --git a/include/configs/TQM8540.h b/include/configs/TQM8540.h
index 9dc77c4..8438b93 100644
--- a/include/configs/TQM8540.h
+++ b/include/configs/TQM8540.h
@@ -280,20 +280,24 @@
 
 #define CONFIG_MII		1	/* MII PHY management */
 #define CONFIG_MPC85XX_TSEC1	1
+#define CONFIG_MPC85XX_TSEC1_NAME	"TSEC0"
 #define CONFIG_MPC85XX_TSEC2	1
+#define CONFIG_MPC85XX_TSEC2_NAME	"TSEC1"
 #define TSEC1_PHY_ADDR		0
 #define TSEC2_PHY_ADDR		1
 #define TSEC1_PHYIDX		0
 #define TSEC2_PHYIDX		0
 
 #define CONFIG_MPC85XX_FEC	1
+#define CONFIG_MPC85XX_FEC_NAME	"FEC"
 #define FEC_PHY_ADDR		2
 #define FEC_PHYIDX		0
 
 #define CONFIG_HAS_ETH1
 #define CONFIG_HAS_ETH2
 
-#define CONFIG_ETHPRIME		"ENET1"
+/* Options are TSEC[0-1], FEC */
+#define CONFIG_ETHPRIME		"TSEC1"
 
 #endif	/* CONFIG_TSEC_ENET */
 
diff --git a/include/configs/TQM8560.h b/include/configs/TQM8560.h
index f418e26..1466f31 100644
--- a/include/configs/TQM8560.h
+++ b/include/configs/TQM8560.h
@@ -276,6 +276,7 @@
 
 #define CONFIG_MII		1	/* MII PHY management */
 #define CONFIG_MPC85XX_TSEC2	1
+#define CONFIG_MPC85XX_TSEC2_NAME	"TSEC1"
 #define TSEC2_PHY_ADDR		1
 #define TSEC2_PHYIDX		0
 
@@ -288,7 +289,7 @@
 #define CFG_CPMFCR_RAMTYPE    0
 #define CFG_FCC_PSMR          (FCC_PSMR_FDE | FCC_PSMR_LPB)
 
-#define CONFIG_ETHPRIME		"ENET1"
+#define CONFIG_ETHPRIME		"TSEC1"
 
 /*
  * Environment
diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index 72a3091..5a434dc 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -210,10 +210,14 @@
 
 #if defined(CONFIG_TSEC_ENET)		/* TSEC Ethernet port */
 
-  #define CONFIG_NET_MULTI	1
-  #define CONFIG_PHY_BCM5421S	1	/* GigaBit Ether PHY	     */
-  #define CONFIG_MII		1	/* MII PHY management		*/
-  #define CONFIG_PHY_ADDR	25	/* PHY address			*/
+#  define CONFIG_NET_MULTI	1
+#  define CONFIG_MII		1	/* MII PHY management		*/
+#  define CONFIG_MPC85xx_TSEC1
+#  define CONFIG_MPC85xx_TSEC1_NAME	"TSEC0"
+#  define TSEC1_PHY_ADDR	25
+#  define TSEC1_PHYIDX		0
+/* Options are: TSEC0 */
+#  define CONFIG_ETHPRIME		"TSEC0"
 
 #elif defined(CONFIG_ETHER_ON_FCC)	/* CPM FCC Ethernet */
 
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index b5684d3..e218597 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -227,14 +227,16 @@
 #define CONFIG_MII		1	/* MII PHY management		*/
 
 #define CONFIG_MPC85XX_TSEC1	1
+#define CONFIG_MPC85XX_TSEC1_NAME	"TSEC0"
 #define CONFIG_MPC85XX_TSEC2	1
+#define CONFIG_MPC85XX_TSEC2_NAME	"TSEC1"
 #undef CONFIG_MPS85XX_FEC
 
 #define TSEC1_PHY_ADDR		2
 #define TSEC2_PHY_ADDR		4
 #define TSEC1_PHYIDX		0
 #define TSEC2_PHYIDX		0
-#define CONFIG_ETHPRIME		"MOTO ENET0"
+#define CONFIG_ETHPRIME		"TSEC0"
 
 #elif defined(CONFIG_ETHER_ON_FCC)	/* CPM FCC Ethernet */
 
-- 
cgit v1.1


From f046ccd15c8bc9613bfd72916b761a127d36e5c6 Mon Sep 17 00:00:00 2001
From: Eran Liberty <liberty@freescale.com>
Date: Thu, 28 Jul 2005 10:08:46 -0500
Subject: * Patch by Eran Liberty   Add support for the Freescale MPC8349ADS
 board.

---
 include/configs/MPC8349ADS.h | 609 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 609 insertions(+)
 create mode 100644 include/configs/MPC8349ADS.h

(limited to 'include/configs')

diff --git a/include/configs/MPC8349ADS.h b/include/configs/MPC8349ADS.h
new file mode 100644
index 0000000..4f4a99b
--- /dev/null
+++ b/include/configs/MPC8349ADS.h
@@ -0,0 +1,609 @@
+/*
+ * Copyright 2004 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mpc8349ads board configuration file
+ *
+ * Please refer to doc/README.mpc83xxads for more info.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+#define CONFIG_MII
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300		1	/* E300 Family */
+#define CONFIG_MPC83XX		1	/* MPC83XX family */
+#define CONFIG_MPC8349		1	/* MPC8349 specific */
+#define CONFIG_MPC8349ADS	1	/* MPC8349ADS board specific */
+
+#define CONFIG_PCI
+
+#define CONFIG_TSEC_ENET 		/* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
+
+#undef CONFIG_DDR_ECC			/* only for ECC DDR module */
+
+#define PCI_66M
+#ifdef PCI_66M
+#define CONFIG_83XX_CLKIN	66000000	/* in Hz */
+#else
+#define CONFIG_83XX_CLKIN	33000000	/* in Hz */
+#endif
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#ifdef PCI_66M
+#define CONFIG_SYS_CLK_FREQ	66000000
+#else
+#define CONFIG_SYS_CLK_FREQ	33000000
+#endif
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_F	/* call board_pre_init */
+
+#define CFG_IMMRBAR		0xE0000000
+
+#undef CFG_DRAM_TEST                   /* memory test, takes time */
+#define CFG_MEMTEST_START       0x00000000      /* memtest region */
+#define CFG_MEMTEST_END         0x00100000
+
+
+
+/*
+ * DDR Setup
+ */
+
+#define CFG_DDR_BASE	0x00000000	/* DDR is system memory*/
+#define CFG_SDRAM_BASE CFG_DDR_BASE
+#undef  CONFIG_DDR_2T_TIMING
+#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
+
+#if defined(CONFIG_SPD_EEPROM)
+    /*
+     * Determine DDR configuration from I2C interface.
+     */
+    #define SPD_EEPROM_ADDRESS	0x51		/* DDR DIMM */
+
+#else
+    /*
+     * Manually set up DDR parameters
+     */
+    #define CFG_DDR_SIZE	    256		/* Mb */
+    #define CFG_DDR_CONFIG	(CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9)
+    #define CFG_DDR_TIMING_1	0x37344321
+    #define CFG_DDR_TIMING_2	0x00000800  /* P9-45,may need tuning */
+    #define CFG_DDR_CONTROL 	0xc2000000  /* unbuffered,no DYN_PWR */
+    #define CFG_DDR_MODE    	0x00000062  /* DLL,normal,seq,4/2.5 */
+    #define CFG_DDR_INTERVAL	0x05200100  /* autocharge,no open page */
+#endif
+
+
+/*
+ * SDRAM on the Local Bus
+ */
+#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
+#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI			/* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER			/* use the CFI driver */
+#define CFG_FLASH_BASE		0xFE000000	/* start of FLASH   */
+#define CFG_FLASH_SIZE		8		/* FLASH size in MB */
+/* #define CFG_FLASH_USE_BUFFER_WRITE */
+
+#define CFG_BR0_PRELIM	(CFG_FLASH_BASE |	/* Flash Base address */ \
+			(2 << BR_PS_SHIFT) |	/* 32 bit port size */	 \
+			BR_V)			/* valid */
+#define CFG_OR0_PRELIM		0xff806ff7	/* 16Mb Flash size*/
+#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE	/* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM  0x80000016		/* 16Mb window size */
+
+
+#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
+#define CFG_MAX_FLASH_SECT	64		/* sectors per device */
+
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+
+#define CFG_MID_FLASH_JUMP      0x7F000000
+#define CFG_MONITOR_BASE    	TEXT_BASE	/* start of monitor */
+
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef  CFG_RAMBOOT
+#endif
+
+/*
+ * BCSR register on local bus 32KB, 8-bit wide for ADS config reg
+ */
+#define CFG_BCSR             0xF8000000
+#define CFG_LBLAWBAR1_PRELIM CFG_BCSR	/* Access window base at BCSR base */
+#define CFG_LBLAWAR1_PRELIM  0x8000000E		/* Access window size 32K */
+#define CFG_BR1_PRELIM	  (CFG_BCSR|0x00000801)	/* Port-size=8bit, MSEL=GPCM */
+#define CFG_OR1_PRELIM		0xFFFFE8f0	/* length 32K */
+
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK 	1
+#define CFG_INIT_RAM_ADDR	0xe4010000   /* Initial RAM address */
+#define CFG_INIT_RAM_END    	0x1000	     /* End of used area in RAM*/
+
+#define CFG_GBL_DATA_SIZE  	0x100     /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN	    	(256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN	    	(128 * 1024) /* Reserved for malloc */
+
+/*
+ * Local Bus LCRR and LBCR regs
+ *    LCRR:  DLL bypass, Clock divider is 4
+ * External Local Bus rate is
+ *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
+ */
+#define CFG_LCRR	(LCRR_DBYP | LCRR_CLKDIV_4)
+#define CFG_LBC_LBCR	0x00000000
+
+#define CFG_LB_SDRAM	/* if board has SRDAM on local bus */
+
+#ifdef CFG_LB_SDRAM
+/*local bus BR2, OR2 definition for SDRAM if soldered on the ADS board*/
+/*
+ * Base Register 2 and Option Register 2 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR2, need:
+ *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ *    port-size = 32-bits = BR2[19:20] = 11
+ *    no parity checking = BR2[21:22] = 00
+ *    SDRAM for MSEL = BR2[24:26] = 011
+ *    Valid = BR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
+ *
+ * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * FIXME: the top 17 bits of BR2.
+ */
+
+#define CFG_BR2_PRELIM		0xf0001861 /*Port-size=32bit, MSEL=SDRAM*/
+
+#define CFG_LBLAWBAR2_PRELIM 0xF0000000
+
+#define CFG_LBLAWAR2_PRELIM 0x80000019 /*64M*/
+
+
+/*
+ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ *
+ * For OR2, need:
+ *    64MB mask for AM, OR2[0:7] = 1111 1100
+ *		   XAM, OR2[17:18] = 11
+ *    9 columns OR2[19-21] = 010
+ *    13 rows   OR2[23-25] = 100
+ *    EAD set for extra time OR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
+ */
+
+#define CFG_OR2_PRELIM	0xfc006901
+
+#define CFG_LBC_LSRT	0x32000000    /* LB sdram refresh timer, about 6us */
+#define CFG_LBC_MRTPR	0x20000000    /* LB refresh timer prescal, 266MHz/32*/
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_RFEN	(1 << (31 -  1))
+#define CFG_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
+#define CFG_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
+#define CFG_LBC_LSDMR_RFCR5	(3 << (31 - 16))
+#define CFG_LBC_LSDMR_RFCR8	(5 << (31 - 16))
+#define CFG_LBC_LSDMR_RFCR16	(7 << (31 - 16))
+#define CFG_LBC_LSDMR_PRETOACT3	(3 << (31 - 19))
+#define CFG_LBC_LSDMR_PRETOACT6	(5 << (31 - 19))
+#define CFG_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
+#define CFG_LBC_LSDMR_ACTTORW3	(3 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
+#define CFG_LBC_LSDMR_BL8	(1 << (31 - 23))
+#define CFG_LBC_LSDMR_WRC2	(2 << (31 - 27))
+#define CFG_LBC_LSDMR_WRC3	(3 << (31 - 27))
+#define CFG_LBC_LSDMR_WRC4	(0 << (31 - 27))
+#define CFG_LBC_LSDMR_BUFCMD	(1 << (31 - 29))
+#define CFG_LBC_LSDMR_CL3	(3 << (31 - 31))
+
+#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+
+#define CFG_LBC_LSDMR_COMMON    ( CFG_LBC_LSDMR_RFEN            \
+                                | CFG_LBC_LSDMR_BSMA1516	\
+				| CFG_LBC_LSDMR_RFCR8		\
+				| CFG_LBC_LSDMR_PRETOACT6	\
+				| CFG_LBC_LSDMR_ACTTORW3	\
+				| CFG_LBC_LSDMR_BL8		\
+				| CFG_LBC_LSDMR_WRC3		\
+				| CFG_LBC_LSDMR_CL3		\
+				)
+
+
+/*
+ * SDRAM Controller configuration sequence.
+ */
+#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_PCHALL)
+#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_MRW)
+#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_NORMAL)
+
+#endif
+
+
+
+
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX     1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE    1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1        (CFG_IMMRBAR+0x4500)
+#define CFG_NS16550_COM2        (CFG_IMMRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef  CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* I2C */
+#define  CONFIG_HARD_I2C		/* I2C with hardware support*/
+#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
+#define CFG_I2C_OFFSET      0x3000
+#define CFG_I2C2_OFFSET      0x3100
+
+/* TSEC */
+#define CFG_TSEC1_OFFSET 0x24000
+#define CFG_TSEC1 (CFG_IMMRBAR+CFG_TSEC1_OFFSET)
+#define CFG_TSEC2_OFFSET 0x25000
+#define CFG_TSEC2 (CFG_IMMRBAR+CFG_TSEC2_OFFSET)
+
+
+/* IO Configuration */
+#define CFG_IO_CONF (\
+	IO_CONF_UART |\
+	IO_CONF_TSEC1 |\
+	IO_CONF_IRQ0 |\
+	IO_CONF_IRQ1 |\
+	IO_CONF_IRQ2 |\
+	IO_CONF_IRQ3 |\
+	IO_CONF_IRQ4 |\
+	IO_CONF_IRQ5 |\
+	IO_CONF_IRQ6 |\
+	IO_CONF_IRQ7 )
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE	0x80000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xe2000000
+#define CFG_PCI1_IO_SIZE	0x1000000	/* 16M */
+
+
+#define CFG_PCI2_MEM_BASE	0xA0000000
+#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
+#define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI2_IO_BASE	0x00000000
+#define CFG_PCI2_IO_PHYS	0xe3000000
+#define CFG_PCI2_IO_SIZE	0x1000000	/* 16M */
+#if defined(CONFIG_PCI)
+
+//#define PCI_64BIT
+#define PCI_ALL_PCI1
+//#define PCI_ONE_PCI1
+//#define PCI_TWO_PCI1
+#if defined(PCI_64BIT)
+#undef PCI_ALL_PCI1
+#undef PCI_TWO_PCI1
+#undef PCI_ONE_PCI1
+#endif
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+
+#if !defined(CONFIG_PCI_PNP)
+    #define PCI_ENET0_IOADDR	0xFIXME
+    #define PCI_ENET0_MEMADDR	0xFIXME
+    #define PCI_IDSEL_NUMBER	0x0c 	/* slot0->3(IDSEL)=12->15 */
+#endif
+
+#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
+
+#endif	/* CONFIG_PCI */
+
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 	1
+#endif
+
+#define CONFIG_GMII		1	/* MII PHY management */
+#define CONFIG_MPC83XX_TSEC1	1
+#define CONFIG_MPC83XX_TSEC1_NAME	"TSEC0"
+#define CONFIG_MPC83XX_TSEC2	1
+#define CONFIG_MPC83XX_TSEC2_NAME	"TSEC1"
+#define TSEC1_PHY_ADDR		0
+#define TSEC2_PHY_ADDR		1
+#define TSEC1_PHYIDX		0
+#define TSEC2_PHYIDX		0
+
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME		"TSEC0"
+
+#endif	/* CONFIG_TSEC_ENET */
+
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+  #define CFG_ENV_IS_IN_FLASH	1
+  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+  #define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+  #define CFG_ENV_SIZE		0x2000
+#else
+  #define CFG_NO_FLASH		1	/* Flash is not usable now */
+  #define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+  #define CFG_ENV_SIZE		0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+#if defined(CFG_RAMBOOT)
+  #if defined(CONFIG_PCI)
+    #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL	\
+				 | CFG_CMD_PING		\
+				 | CFG_CMD_PCI		\
+				 | CFG_CMD_I2C)		\
+				&			\
+				 ~(CFG_CMD_ENV		\
+				  | CFG_CMD_LOADS))
+  #else
+    #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL	\
+				 | CFG_CMD_PING		\
+				 | CFG_CMD_I2C)		\
+				&			\
+				 ~(CFG_CMD_ENV		\
+				  | CFG_CMD_LOADS))
+  #endif
+#else
+  #if defined(CONFIG_PCI)
+    #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL		\
+				| CFG_CMD_PCI		\
+				| CFG_CMD_PING		\
+				| CFG_CMD_I2C)
+  #else
+    #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL		\
+				| CFG_CMD_PING		\
+				| CFG_CMD_I2C       \
+				| CFG_CMD_MII       \
+				)
+  #endif
+#endif
+
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	*/
+#define CFG_LOAD_ADDR	0x2000000	/* default load address */
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+    #define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#else
+    #define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE		32768
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
+#endif
+
+#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
+
+#define CFG_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_1X1 |\
+	HRCWL_CSB_TO_CLKIN_4X1 |\
+	HRCWL_VCO_1X2 |\
+	HRCWL_CORE_TO_CSB_2X1)
+
+#if defined(PCI_64BIT)
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_64_BIT_PCI |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_PCI2_ARBITER_DISABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0X00000100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_TSEC1M_IN_GMII |\
+	HRCWH_TSEC2M_IN_GMII )
+#else
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_32_BIT_PCI |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_PCI2_ARBITER_ENABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0X00000100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_TSEC1M_IN_GMII |\
+	HRCWH_TSEC2M_IN_GMII )
+#endif
+
+
+#define CFG_HID0_INIT 0x000000000
+
+#define CFG_HID0_FINAL CFG_HID0_INIT
+
+/* #define CFG_HID0_FINAL		(\
+	HID0_ENABLE_INSTRUCTION_CACHE |\
+	HID0_ENABLE_M_BIT |\
+	HID0_ENABLE_ADDRESS_BROADCAST ) */
+
+#define CFG_HID2 0x000000000
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02	/* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+
+/*
+ * Environment Configuration
+ */
+
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_ETHADDR   00:04:9f:11:22:33
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR  00:E0:0C:00:7D:01
+#endif
+
+#define CONFIG_IPADDR    10.193.20.150
+
+#define CONFIG_HOSTNAME	 unknown
+#define CONFIG_ROOTPATH	 /tftpboot/10.193.20.150
+#define CONFIG_BOOTFILE	 /tftpboot/vmlinux.150
+
+#define CONFIG_SERVERIP  10.193.20.58
+#define CONFIG_GATEWAYIP 192.168.1.1
+#define CONFIG_NETMASK   255.255.255.0
+
+#define CONFIG_LOADADDR  200000	/* default location for tftp and bootm */
+
+#define CONFIG_BOOTDELAY 6	/* -1 disables auto-boot */
+#undef  CONFIG_BOOTARGS		/* the boot command will set bootargs */
+
+#define CONFIG_BAUDRATE	 115200
+
+
+#define	CONFIG_EXTRA_ENV_SETTINGS		                        \
+   "netdev=eth0\0"                                                      \
+   "consoledev=ttyS0\0"                                                 \
+   "ramdiskaddr=400000\0"			                        \
+   "ramdiskfile=ramfs.83xx\0"						\
+
+#define CONFIG_NFSBOOTCOMMAND	                                        \
+   "setenv bootargs root=/dev/nfs rw "                                  \
+   "nfsroot=$serverip:$rootpath "                                       \
+   "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "    \
+   "console=$consoledev,$baudrate $othbootargs;"                        \
+   "tftp $loadaddr $bootfile;"                                          \
+   "bootm $loadaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+   "setenv bootargs root=/dev/ram rw "                                  \
+   "console=$consoledev,$baudrate $othbootargs;"                        \
+   "tftp $ramdiskaddr $ramdiskfile;"                                    \
+   "tftp $loadaddr $bootfile;"                                          \
+   "bootm $loadaddr $ramdiskaddr"
+
+#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
+
+#endif	/* __CONFIG_H */
-- 
cgit v1.1


From b0e32949239c7870d409ca687a2dfc1261a3d838 Mon Sep 17 00:00:00 2001
From: Lunsheng Wang <lunsheng@sohu.com>
Date: Fri, 29 Jul 2005 10:20:29 -0500
Subject: * Patch by Ron Alder, 11 July 2005     Add Xianghua Xiao and Lunsheng
 Wang's support for the     GDA MPC8540 EVAL board.

---
 include/configs/MPC8540EVAL.h | 342 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 342 insertions(+)
 create mode 100644 include/configs/MPC8540EVAL.h

(limited to 'include/configs')

diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h
new file mode 100644
index 0000000..34cbe46
--- /dev/null
+++ b/include/configs/MPC8540EVAL.h
@@ -0,0 +1,342 @@
+/*
+ * (C) Copyright 2002,2003 Motorola,Inc.
+ * Modified by Lunsheng Wang, lunsheng@sohu.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* mpc8540eval board configuration file */
+/* please refer to doc/README.mpc85xxads for more info */
+/* make sure you change the MAC address and other network params first,
+ * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+/* High Level Configuration Options */
+#define CONFIG_BOOKE		1	    /* BOOKE 			*/
+#define CONFIG_E500		1	    /* BOOKE e500 family	*/
+#define CONFIG_MPC85xx		1	    /* MPC8540/MPC8560		*/
+#define CONFIG_MPC8540		1	    /* MPC8540 specific	        */
+#define CONFIG_MPC8540EVAL	1	    /* MPC8540EVAL board specific */
+
+#undef  CONFIG_PCI	         	    /* pci ethernet support	*/
+#define CONFIG_TSEC_ENET 		    /* tsec ethernet support  */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SPD_EEPROM                   /* Use SPD EEPROM for DDR setup */
+#undef  CONFIG_DDR_ECC			    /* only for ECC DDR module */
+#define CONFIG_DDR_DLL                      /* possible DLL fix needed */
+
+/* Using Localbus SDRAM to emulate flash before we can program the flash,
+ * normally you only need a flash-boot image(u-boot.bin),if unsure undef this.
+ * Not availabe for EVAL board
+ */
+#undef CONFIG_RAM_AS_FLASH
+
+/* sysclk for MPC8540EVAL */
+#if defined(CONFIG_SYSCLK_66M)
+#define CONFIG_SYS_CLK_FREQ   66000000    /* the oscillator on board is 66Mhz   */
+                                            /* can also get 66M clock from external PCI */
+#else
+  #define CONFIG_SYS_CLK_FREQ   33000000   /* most pci cards are 33Mhz */
+#endif
+
+/* below can be toggled for performance analysis. otherwise use default */
+#define CONFIG_L2_CACHE		    	    /* toggle L2 cache 	*/
+#undef  CONFIG_BTB			    /* toggle branch predition */
+#undef  CONFIG_ADDR_STREAMING		    /* toggle addr streaming   */
+
+#define CONFIG_BOARD_PRE_INIT	1	    /* Call board_pre_init	*/
+
+#undef	CFG_DRAM_TEST			    /* memory test, takes time  */
+#define CFG_MEMTEST_START	0x00200000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x00400000
+
+#if defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET)
+#error "You can only use either PCI Ethernet Card or TSEC Ethernet, not both."
+#endif
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_CCSRBAR_DEFAULT 	0xff700000	/* CCSRBAR Default	*/
+#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR 	*/
+#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR	*/
+
+#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory  */
+#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+#define CFG_SDRAM_SIZE		256             /* DDR is now 256MB     */
+
+#if defined(CONFIG_RAM_AS_FLASH)
+#define CFG_LBC_SDRAM_BASE	0xfc000000	/* Localbus SDRAM */
+#else
+#define CFG_LBC_SDRAM_BASE      0xf0000000      /* Localbus SDRAM */
+#endif
+#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 0MB	*/
+
+#if defined(CONFIG_RAM_AS_FLASH)
+#define CFG_FLASH_BASE          0xf8000000      /* start of FLASH  16M  */
+#define CFG_BR0_PRELIM          0xf8001801      /* port size 32bit */
+#else /* Boot from real Flash */
+#define CFG_FLASH_BASE		0xff800000	/* start of FLASH 8M    */
+#define CFG_BR0_PRELIM		0xff801001	/* port size 16bit	*/
+#endif
+
+#define	CFG_OR0_PRELIM		0xff806f67	/* 8MB Flash		*/
+#define CFG_MAX_FLASH_BANKS	1		/* number of banks	*/
+#define CFG_MAX_FLASH_SECT	64		/* sectors per device   */
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	60000	/* Timeout for Flash Erase (in ms)*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)*/
+#define CFG_FLASH_CFI		1
+
+#define CFG_MONITOR_BASE    	TEXT_BASE	/* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef  CFG_RAMBOOT
+#endif
+
+#define SPD_EEPROM_ADDRESS	0x51		/* DDR DIMM */
+
+/* Here some DDR setting should be added */
+
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+/* local bus definitions */
+#define CFG_BR2_PRELIM		0xf0001861	/* 64MB localbus SDRAM  */
+#define CFG_OR2_PRELIM		0xfc006901
+#define CFG_LBC_LCRR		0x00030004	/* local bus freq divider*/
+#define CFG_LBC_LBCR		0x00000000
+#define CFG_LBC_LSRT		0x20000000
+#define CFG_LBC_MRTPR		0x20000000
+#define CFG_LBC_LSDMR_1		0x2861b723
+#define CFG_LBC_LSDMR_2		0x0861b723
+#define CFG_LBC_LSDMR_3		0x0861b723
+#define CFG_LBC_LSDMR_4		0x1861b723
+#define CFG_LBC_LSDMR_5		0x4061b723
+
+#if defined(CONFIG_RAM_AS_FLASH)
+#define CFG_BR4_PRELIM          0xf8000801      /* 32KB, 8-bit wide for ADS config reg */
+#else
+#define CFG_BR4_PRELIM          0xf8000801      /* 32KB, 8-bit wide for ADS config reg */
+#endif
+#define CFG_OR4_PRELIM          0xffffe1f1
+#define CFG_BCSR                (CFG_BR4_PRELIM & 0xffff8000)
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK 	1
+#define CFG_INIT_RAM_ADDR   	0x40000000 	/* Initial RAM address	*/
+#define CFG_INIT_RAM_END    	0x4000	    	/* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE  	128		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN	    	(256 * 1024)    /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN	    	(128 * 1024)    /* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX     1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE    1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+#define CONFIG_BAUDRATE	 	115200
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1        (CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2        (CFG_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef  CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* I2C */
+#define  CONFIG_HARD_I2C		/* I2C with hardware support*/
+#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
+
+/* General PCI */
+#define CFG_PCI_MEM_BASE	0x80000000
+#define CFG_PCI_MEM_PHYS	0x80000000
+#define CFG_PCI_MEM_SIZE	0x20000000
+#define CFG_PCI_IO_BASE         0xe2000000
+
+#if defined(CONFIG_PCI)
+#define CONFIG_NET_MULTI
+#undef CONFIG_EEPRO100
+#define CONFIG_TULIP
+#define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
+  #if !defined(CONFIG_PCI_PNP)
+  #define PCI_ENET0_IOADDR      0xe0000000
+  #define PCI_ENET0_MEMADDR     0xe0000000
+  #define PCI_IDSEL_NUMBER      0x0c 	/*slot0->3(IDSEL)=12->15*/
+  #endif
+#define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup  */
+#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
+#define CFG_PCI_SUBSYS_DEVICEID 0x0008
+#elif defined(CONFIG_TSEC_ENET)
+#define CONFIG_NET_MULTI 	1
+#define CONFIG_MII		1	/* MII PHY management	*/
+#define CONFIG_MPC85XX_TSEC1    1
+#define CONFIG_MPC85XX_TSEC1_NAME      "TSEC0"
+#define CONFIG_MPC85XX_TSEC2	1
+#define CONFIG_MPC85XX_TSEC2_NAME      "TSEC1"
+#define CONFIG_MPC85XX_FEC      1
+#define CONFIG_MPC85XX_FEC_NAME                "FEC"
+#define TSEC1_PHY_ADDR          7
+#define	TSEC2_PHY_ADDR		4
+#define FEC_PHY_ADDR            2
+#define TSEC1_PHYIDX            0
+#define TSEC2_PHYIDX            0
+#define FEC_PHYIDX              0
+/* Options are: TSEC[0-1], FEC */
+#define CONFIG_ETHPRIME                "TSEC0"
+
+#define CONFIG_PHY_M88E1011     1       /* GigaBit Ether PHY    */
+#define INTEL_LXT971_PHY	1	/* on EVAL board. It is Davicom 9161 on ADS. */
+#endif
+
+#undef DEBUG
+
+/* Environment */
+#ifndef CFG_RAMBOOT
+  #if defined(CONFIG_RAM_AS_FLASH)
+  #define CFG_ENV_IS_NOWHERE
+  #define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x100000)
+  #define CFG_ENV_SIZE		0x2000
+  #else
+  #define CFG_ENV_IS_IN_FLASH	1
+  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+  #define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+  #endif
+  #define CFG_ENV_SIZE		0x2000
+#else
+/* #define CFG_NO_FLASH		1 */	/* Flash is not usable now	*/
+#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only	*/
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+#define CFG_ENV_SIZE		0x2000
+#endif
+
+/*#define CONFIG_BOOTARGS	"root=/dev/nfs rw nfsroot=192.168.1.10:/tftproot/192.168.1.11 ip=192.168.1.11:192.168.1.10:192.168.1.0:255.255.255.0:mpc8540ads-003:eth0:off console=ttyS0,115200"*/
+#define CONFIG_BOOTARGS	"root=/dev/ram rw console=ttyS0,115200"
+#define CONFIG_BOOTCOMMAND	"bootm 0xff800000 0xffa00000"
+#define CONFIG_BOOTDELAY	3 	/* -1 disable autoboot */
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+
+#if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
+  #if defined(CONFIG_PCI)
+  #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_PCI | CFG_CMD_I2C ) & \
+				 ~(CFG_CMD_ENV | CFG_CMD_LOADS ))
+  #else
+  #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C ) & \
+				 ~(CFG_CMD_ENV | \
+				  CFG_CMD_LOADS ))
+  #endif
+#else
+  #if defined(CONFIG_PCI)
+  #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_PING | CFG_CMD_I2C )
+  #else
+  #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C )
+  #endif
+#endif
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_LOAD_ADDR   0x2000000       /* default load address */
+#define CFG_PROMPT	"MPC8540EVAL=> "/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	(8 << 20) 	/* Initial Memory map for Linux */
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE	32768
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*****************************/
+/* Environment Configuration */
+/*****************************/
+/* The mac addresses for all ethernet interface */
+/* NOTE: change below for your network setting!!! */
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_ETHADDR  00:01:af:07:9b:8a
+#define CONFIG_ETH1ADDR  00:01:af:07:9b:8b
+#define CONFIG_ETH2ADDR  00:01:af:07:9b:8c
+#endif
+
+#define CONFIG_ROOTPATH  /nfsroot
+#define CONFIG_BOOTFILE  your.uImage
+
+#define CONFIG_SERVERIP         192.168.101.1
+#define CONFIG_IPADDR           192.168.101.11
+#define CONFIG_GATEWAYIP        192.168.101.0
+#define CONFIG_NETMASK          255.255.255.0
+
+#define CONFIG_LOADADDR  200000   /* default location for tftp and bootm */
+
+#define CONFIG_HOSTNAME         MPC8540EVAL
+
+#endif	/* __CONFIG_H */
-- 
cgit v1.1


From de1d0a69956a63cea6a62043ae5d5afb584efe93 Mon Sep 17 00:00:00 2001
From: Jon Loeliger <jdl@freescale.com>
Date: Mon, 1 Aug 2005 13:20:47 -0500
Subject: Fix style issues primarily in 85xx and 83xx boards.     - C++
 comments     - Trailing white space     - Indentation not by TAB     -
 Excessive amount of empty lines     - Trailing empty lines

---
 include/configs/MPC8349ADS.h  | 154 ++++++++++++++++++------------------------
 include/configs/MPC8540EVAL.h |  69 ++++++++++---------
 2 files changed, 101 insertions(+), 122 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/MPC8349ADS.h b/include/configs/MPC8349ADS.h
index 4f4a99b..8daab31 100644
--- a/include/configs/MPC8349ADS.h
+++ b/include/configs/MPC8349ADS.h
@@ -73,8 +73,6 @@
 #define CFG_MEMTEST_START       0x00000000      /* memtest region */
 #define CFG_MEMTEST_END         0x00100000
 
-
-
 /*
  * DDR Setup
  */
@@ -85,25 +83,23 @@
 #define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
 
 #if defined(CONFIG_SPD_EEPROM)
-    /*
-     * Determine DDR configuration from I2C interface.
-     */
-    #define SPD_EEPROM_ADDRESS	0x51		/* DDR DIMM */
-
+	/*
+	 * Determine DDR configuration from I2C interface.
+	 */
+	#define SPD_EEPROM_ADDRESS	0x51		/* DDR DIMM */
 #else
-    /*
-     * Manually set up DDR parameters
-     */
-    #define CFG_DDR_SIZE	    256		/* Mb */
-    #define CFG_DDR_CONFIG	(CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9)
-    #define CFG_DDR_TIMING_1	0x37344321
-    #define CFG_DDR_TIMING_2	0x00000800  /* P9-45,may need tuning */
-    #define CFG_DDR_CONTROL 	0xc2000000  /* unbuffered,no DYN_PWR */
-    #define CFG_DDR_MODE    	0x00000062  /* DLL,normal,seq,4/2.5 */
-    #define CFG_DDR_INTERVAL	0x05200100  /* autocharge,no open page */
+	/*
+	 * Manually set up DDR parameters
+	 */
+	#define CFG_DDR_SIZE	    256		/* Mb */
+	#define CFG_DDR_CONFIG	(CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9)
+	#define CFG_DDR_TIMING_1	0x37344321
+	#define CFG_DDR_TIMING_2	0x00000800  /* P9-45,may need tuning */
+	#define CFG_DDR_CONTROL 	0xc2000000  /* unbuffered,no DYN_PWR */
+	#define CFG_DDR_MODE    	0x00000062  /* DLL,normal,seq,4/2.5 */
+	#define CFG_DDR_INTERVAL	0x05200100  /* autocharge,no open page */
 #endif
 
-
 /*
  * SDRAM on the Local Bus
  */
@@ -126,7 +122,6 @@
 #define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE	/* Window base at flash base */
 #define CFG_LBLAWAR0_PRELIM  0x80000016		/* 16Mb window size */
 
-
 #define CFG_MAX_FLASH_BANKS	1		/* number of banks */
 #define CFG_MAX_FLASH_SECT	64		/* sectors per device */
 
@@ -137,7 +132,6 @@
 #define CFG_MID_FLASH_JUMP      0x7F000000
 #define CFG_MONITOR_BASE    	TEXT_BASE	/* start of monitor */
 
-
 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
 #define CFG_RAMBOOT
 #else
@@ -153,7 +147,6 @@
 #define CFG_BR1_PRELIM	  (CFG_BCSR|0x00000801)	/* Port-size=8bit, MSEL=GPCM */
 #define CFG_OR1_PRELIM		0xFFFFE8f0	/* length 32K */
 
-
 #define CONFIG_L1_INIT_RAM
 #define CFG_INIT_RAM_LOCK 	1
 #define CFG_INIT_RAM_ADDR	0xe4010000   /* Initial RAM address */
@@ -198,11 +191,8 @@
  */
 
 #define CFG_BR2_PRELIM		0xf0001861 /*Port-size=32bit, MSEL=SDRAM*/
-
-#define CFG_LBLAWBAR2_PRELIM 0xF0000000
-
-#define CFG_LBLAWAR2_PRELIM 0x80000019 /*64M*/
-
+#define CFG_LBLAWBAR2_PRELIM	0xF0000000
+#define CFG_LBLAWAR2_PRELIM	0x80000019 /*64M*/
 
 /*
  * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
@@ -255,7 +245,7 @@
 #define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
 
 #define CFG_LBC_LSDMR_COMMON    ( CFG_LBC_LSDMR_RFEN            \
-                                | CFG_LBC_LSDMR_BSMA1516	\
+				| CFG_LBC_LSDMR_BSMA1516	\
 				| CFG_LBC_LSDMR_RFCR8		\
 				| CFG_LBC_LSDMR_PRETOACT6	\
 				| CFG_LBC_LSDMR_ACTTORW3	\
@@ -264,7 +254,6 @@
 				| CFG_LBC_LSDMR_CL3		\
 				)
 
-
 /*
  * SDRAM Controller configuration sequence.
  */
@@ -278,13 +267,8 @@
 				| CFG_LBC_LSDMR_OP_MRW)
 #define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
 				| CFG_LBC_LSDMR_OP_NORMAL)
-
 #endif
 
-
-
-
-
 /*
  * Serial Port
  */
@@ -322,7 +306,6 @@
 #define CFG_TSEC2_OFFSET 0x25000
 #define CFG_TSEC2 (CFG_IMMRBAR+CFG_TSEC2_OFFSET)
 
-
 /* IO Configuration */
 #define CFG_IO_CONF (\
 	IO_CONF_UART |\
@@ -347,7 +330,6 @@
 #define CFG_PCI1_IO_PHYS	0xe2000000
 #define CFG_PCI1_IO_SIZE	0x1000000	/* 16M */
 
-
 #define CFG_PCI2_MEM_BASE	0xA0000000
 #define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
 #define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
@@ -356,10 +338,7 @@
 #define CFG_PCI2_IO_SIZE	0x1000000	/* 16M */
 #if defined(CONFIG_PCI)
 
-//#define PCI_64BIT
 #define PCI_ALL_PCI1
-//#define PCI_ONE_PCI1
-//#define PCI_TWO_PCI1
 #if defined(PCI_64BIT)
 #undef PCI_ALL_PCI1
 #undef PCI_TWO_PCI1
@@ -373,9 +352,9 @@
 #undef CONFIG_TULIP
 
 #if !defined(CONFIG_PCI_PNP)
-    #define PCI_ENET0_IOADDR	0xFIXME
-    #define PCI_ENET0_MEMADDR	0xFIXME
-    #define PCI_IDSEL_NUMBER	0x0c 	/* slot0->3(IDSEL)=12->15 */
+	#define PCI_ENET0_IOADDR	0xFIXME
+	#define PCI_ENET0_MEMADDR	0xFIXME
+	#define PCI_IDSEL_NUMBER	0x0c 	/* slot0->3(IDSEL)=12->15 */
 #endif
 
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
@@ -383,9 +362,7 @@
 
 #endif	/* CONFIG_PCI */
 
-
 #if defined(CONFIG_TSEC_ENET)
-
 #ifndef CONFIG_NET_MULTI
 #define CONFIG_NET_MULTI 	1
 #endif
@@ -405,55 +382,54 @@
 
 #endif	/* CONFIG_TSEC_ENET */
 
-
 /*
  * Environment
  */
 #ifndef CFG_RAMBOOT
-  #define CFG_ENV_IS_IN_FLASH	1
-  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-  #define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
-  #define CFG_ENV_SIZE		0x2000
+	#define CFG_ENV_IS_IN_FLASH	1
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+	#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+	#define CFG_ENV_SIZE		0x2000
 #else
-  #define CFG_NO_FLASH		1	/* Flash is not usable now */
-  #define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
-  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
-  #define CFG_ENV_SIZE		0x2000
+	#define CFG_NO_FLASH		1	/* Flash is not usable now */
+	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+	#define CFG_ENV_SIZE		0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 #if defined(CFG_RAMBOOT)
-  #if defined(CONFIG_PCI)
-    #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL	\
+#if defined(CONFIG_PCI)
+#define  CONFIG_COMMANDS	((CONFIG_CMD_DFL	\
 				 | CFG_CMD_PING		\
 				 | CFG_CMD_PCI		\
 				 | CFG_CMD_I2C)		\
 				&			\
 				 ~(CFG_CMD_ENV		\
 				  | CFG_CMD_LOADS))
-  #else
-    #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL	\
+#else
+#define  CONFIG_COMMANDS	((CONFIG_CMD_DFL	\
 				 | CFG_CMD_PING		\
 				 | CFG_CMD_I2C)		\
 				&			\
 				 ~(CFG_CMD_ENV		\
 				  | CFG_CMD_LOADS))
-  #endif
+#endif
 #else
-  #if defined(CONFIG_PCI)
-    #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL		\
+#if defined(CONFIG_PCI)
+#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL		\
 				| CFG_CMD_PCI		\
 				| CFG_CMD_PING		\
 				| CFG_CMD_I2C)
-  #else
-    #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL		\
+#else
+#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL		\
 				| CFG_CMD_PING		\
 				| CFG_CMD_I2C       \
 				| CFG_CMD_MII       \
 				)
-  #endif
+#endif
 #endif
 
 #include <cmd_confdefs.h>
@@ -468,9 +444,9 @@
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
 
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-    #define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+	#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
-    #define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+	#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
 
 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
@@ -529,7 +505,6 @@
 	HRCWH_TSEC2M_IN_GMII )
 #endif
 
-
 #define CFG_HID0_INIT 0x000000000
 
 #define CFG_HID0_FINAL CFG_HID0_INIT
@@ -554,7 +529,6 @@
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
-
 /*
  * Environment Configuration
  */
@@ -565,13 +539,13 @@
 #define CONFIG_ETH1ADDR  00:E0:0C:00:7D:01
 #endif
 
-#define CONFIG_IPADDR    10.193.20.150
+#define CONFIG_IPADDR    192.168.1.253
 
 #define CONFIG_HOSTNAME	 unknown
-#define CONFIG_ROOTPATH	 /tftpboot/10.193.20.150
-#define CONFIG_BOOTFILE	 /tftpboot/vmlinux.150
+#define CONFIG_ROOTPATH	 /nfsroot
+#define CONFIG_BOOTFILE	 your.uImage
 
-#define CONFIG_SERVERIP  10.193.20.58
+#define CONFIG_SERVERIP  192.168.1.1
 #define CONFIG_GATEWAYIP 192.168.1.1
 #define CONFIG_NETMASK   255.255.255.0
 
@@ -583,26 +557,26 @@
 #define CONFIG_BAUDRATE	 115200
 
 
-#define	CONFIG_EXTRA_ENV_SETTINGS		                        \
-   "netdev=eth0\0"                                                      \
-   "consoledev=ttyS0\0"                                                 \
-   "ramdiskaddr=400000\0"			                        \
-   "ramdiskfile=ramfs.83xx\0"						\
-
-#define CONFIG_NFSBOOTCOMMAND	                                        \
-   "setenv bootargs root=/dev/nfs rw "                                  \
-   "nfsroot=$serverip:$rootpath "                                       \
-   "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "    \
-   "console=$consoledev,$baudrate $othbootargs;"                        \
-   "tftp $loadaddr $bootfile;"                                          \
-   "bootm $loadaddr"
-
-#define CONFIG_RAMBOOTCOMMAND \
-   "setenv bootargs root=/dev/ram rw "                                  \
-   "console=$consoledev,$baudrate $othbootargs;"                        \
-   "tftp $ramdiskaddr $ramdiskfile;"                                    \
-   "tftp $loadaddr $bootfile;"                                          \
-   "bootm $loadaddr $ramdiskaddr"
+#define	CONFIG_EXTRA_ENV_SETTINGS			\
+	"netdev=eth0\0"					\
+	"consoledev=ttyS0\0"				\
+	"ramdiskaddr=400000\0"				\
+	"ramdiskfile=ramfs.83xx\0"
+
+#define CONFIG_NFSBOOTCOMMAND				\
+	"setenv bootargs root=/dev/nfs rw "		\
+	"nfsroot=$serverip:$rootpath "			\
+	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+	"console=$consoledev,$baudrate $othbootargs;"	\
+	"tftp $loadaddr $bootfile;"			\
+	"bootm $loadaddr"
+
+#define CONFIG_RAMBOOTCOMMAND				\
+	"setenv bootargs root=/dev/ram rw "		\
+	"console=$consoledev,$baudrate $othbootargs;"	\
+	"tftp $ramdiskaddr $ramdiskfile;"		\
+	"tftp $loadaddr $bootfile;"			\
+	"bootm $loadaddr $ramdiskaddr"
 
 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
 
diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h
index 34cbe46..1af9231 100644
--- a/include/configs/MPC8540EVAL.h
+++ b/include/configs/MPC8540EVAL.h
@@ -51,10 +51,13 @@
 
 /* sysclk for MPC8540EVAL */
 #if defined(CONFIG_SYSCLK_66M)
-#define CONFIG_SYS_CLK_FREQ   66000000    /* the oscillator on board is 66Mhz   */
-                                            /* can also get 66M clock from external PCI */
+	/*
+	 * the oscillator on board is 66Mhz
+	 * can also get 66M clock from external PCI
+	 */
+	#define CONFIG_SYS_CLK_FREQ   66000000
 #else
-  #define CONFIG_SYS_CLK_FREQ   33000000   /* most pci cards are 33Mhz */
+	#define CONFIG_SYS_CLK_FREQ   33000000   /* most pci cards are 33Mhz */
 #endif
 
 /* below can be toggled for performance analysis. otherwise use default */
@@ -194,11 +197,11 @@
 #undef CONFIG_EEPRO100
 #define CONFIG_TULIP
 #define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
-  #if !defined(CONFIG_PCI_PNP)
-  #define PCI_ENET0_IOADDR      0xe0000000
-  #define PCI_ENET0_MEMADDR     0xe0000000
-  #define PCI_IDSEL_NUMBER      0x0c 	/*slot0->3(IDSEL)=12->15*/
-  #endif
+#if !defined(CONFIG_PCI_PNP)
+#define PCI_ENET0_IOADDR      0xe0000000
+#define PCI_ENET0_MEMADDR     0xe0000000
+#define PCI_IDSEL_NUMBER      0x0c 	/*slot0->3(IDSEL)=12->15*/
+#endif
 #define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup  */
 #define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
 #define CFG_PCI_SUBSYS_DEVICEID 0x0008
@@ -221,23 +224,23 @@
 #define CONFIG_ETHPRIME                "TSEC0"
 
 #define CONFIG_PHY_M88E1011     1       /* GigaBit Ether PHY    */
-#define INTEL_LXT971_PHY	1	/* on EVAL board. It is Davicom 9161 on ADS. */
+#define INTEL_LXT971_PHY	1
 #endif
 
 #undef DEBUG
 
 /* Environment */
 #ifndef CFG_RAMBOOT
-  #if defined(CONFIG_RAM_AS_FLASH)
-  #define CFG_ENV_IS_NOWHERE
-  #define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x100000)
-  #define CFG_ENV_SIZE		0x2000
-  #else
-  #define CFG_ENV_IS_IN_FLASH	1
-  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
-  #define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
-  #endif
-  #define CFG_ENV_SIZE		0x2000
+#if defined(CONFIG_RAM_AS_FLASH)
+#define CFG_ENV_IS_NOWHERE
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x100000)
+#define CFG_ENV_SIZE		0x2000
+#else
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+#endif
+#define CFG_ENV_SIZE		0x2000
 #else
 /* #define CFG_NO_FLASH		1 */	/* Flash is not usable now	*/
 #define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only	*/
@@ -245,7 +248,6 @@
 #define CFG_ENV_SIZE		0x2000
 #endif
 
-/*#define CONFIG_BOOTARGS	"root=/dev/nfs rw nfsroot=192.168.1.10:/tftproot/192.168.1.11 ip=192.168.1.11:192.168.1.10:192.168.1.0:255.255.255.0:mpc8540ads-003:eth0:off console=ttyS0,115200"*/
 #define CONFIG_BOOTARGS	"root=/dev/ram rw console=ttyS0,115200"
 #define CONFIG_BOOTCOMMAND	"bootm 0xff800000 0xffa00000"
 #define CONFIG_BOOTDELAY	3 	/* -1 disable autoboot */
@@ -254,21 +256,24 @@
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 #if defined(CFG_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
-  #if defined(CONFIG_PCI)
-  #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_PCI | CFG_CMD_I2C ) & \
+#if defined(CONFIG_PCI)
+#define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_PING \
+				| CFG_CMD_PCI | CFG_CMD_I2C ) & \
 				 ~(CFG_CMD_ENV | CFG_CMD_LOADS ))
-  #else
-  #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C ) & \
-				 ~(CFG_CMD_ENV | \
-				  CFG_CMD_LOADS ))
-  #endif
 #else
-  #if defined(CONFIG_PCI)
-  #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_PING | CFG_CMD_I2C )
-  #else
-  #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C )
-  #endif
+#define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_PING \
+				| CFG_CMD_I2C ) & \
+				 ~(CFG_CMD_ENV | CFG_CMD_LOADS ))
 #endif
+#else
+#if defined(CONFIG_PCI)
+#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_PCI \
+				| CFG_CMD_PING | CFG_CMD_I2C )
+#else
+#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_I2C )
+#endif
+#endif
+
 #include <cmd_confdefs.h>
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled		*/
-- 
cgit v1.1


From a99a0a98b9fcf78ee2ceda893e8d4bd9b11e427a Mon Sep 17 00:00:00 2001
From: Jon Loeliger <jdl@freescale.com>
Date: Thu, 4 Aug 2005 17:32:05 -0500
Subject: Default 8349ADS CONFIG_PCI off for now. Real support for PCI comes in
 a follow-up patch.

---
 include/configs/MPC8349ADS.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'include/configs')

diff --git a/include/configs/MPC8349ADS.h b/include/configs/MPC8349ADS.h
index 8daab31..d6d2fab 100644
--- a/include/configs/MPC8349ADS.h
+++ b/include/configs/MPC8349ADS.h
@@ -41,7 +41,8 @@
 #define CONFIG_MPC8349		1	/* MPC8349 specific */
 #define CONFIG_MPC8349ADS	1	/* MPC8349ADS board specific */
 
-#define CONFIG_PCI
+/* FIXME: Real PCI support will come in a follow-up update. */
+#undef CONFIG_PCI
 
 #define CONFIG_TSEC_ENET 		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
-- 
cgit v1.1